# HA recorder exclusions for the eg4-battery daemon's MQTT entities.
#
# Merge with your existing recorder config; if you don't have one, this whole
# file can be referenced as  `recorder: !include eg4_battery/recorder.yaml`.
#
# Rationale:
#   - register_NN entities are raw Modbus registers, diagnostic only
#   - individual cell voltages are redundant once you have min/max/delta
#   - uptime / version / static config values are pure noise in a timeseries
#
# Everything NOT in `entity_globs` below keeps recording normally, including
# the Tier-1 (pack_voltage / soc / soh / cycle_count / cell_voltage_min/max/
# delta_mv / capacity_ah) and Tier-2 (warnings / protections / error_code)
# entities. See ../NOTES.md for the retention-tier breakdown.

exclude:
  entity_globs:
    # raw Modbus register dump — diagnostic only
    - sensor.lifepower4_*_register_*

    # 16 individual cells per pack = 48 noisy series.
    # cell_voltage_min / _max / _delta_mv already capture 95% of the info.
    # Comment this out if you're debugging a specific drifting cell.
    - sensor.lifepower4_*_cell_01_voltage
    - sensor.lifepower4_*_cell_02_voltage
    - sensor.lifepower4_*_cell_03_voltage
    - sensor.lifepower4_*_cell_04_voltage
    - sensor.lifepower4_*_cell_05_voltage
    - sensor.lifepower4_*_cell_06_voltage
    - sensor.lifepower4_*_cell_07_voltage
    - sensor.lifepower4_*_cell_08_voltage
    - sensor.lifepower4_*_cell_09_voltage
    - sensor.lifepower4_*_cell_10_voltage
    - sensor.lifepower4_*_cell_11_voltage
    - sensor.lifepower4_*_cell_12_voltage
    - sensor.lifepower4_*_cell_13_voltage
    - sensor.lifepower4_*_cell_14_voltage
    - sensor.lifepower4_*_cell_15_voltage
    - sensor.lifepower4_*_cell_16_voltage

    # static metadata (doesn't change, no reason to keep history)
    - sensor.lifepower4_*_bms_version_hi
    - sensor.lifepower4_*_bms_version_lo
    - sensor.lifepower4_*_cell_count
    - sensor.lifepower4_*_cell_highest
    - sensor.lifepower4_*_cell_lowest
    - sensor.lifepower4_*_battery_mode
    - sensor.lifepower4_*_max_current_limit

    # uptime counter — increments every second, kills the recorder's write cache
    - sensor.lifepower4_*_uptime_ds