shaggy-solar

noisedestroyers/shaggy-solar

Fork 0

Commit Graph

Author	SHA1	Message	Date
noise	8dafce7dfe	Docs: reflect this session's findings across the repo - top-level README.md (new): system overview, subsystem map, skills pointer, notable findings. - eg4battery README/NOTES: 3 -> 6 packs (pack 6 oddball 0x01/115200); SoC drift + calibration section; closed-loop comms evaluated and rejected (loses per-pack telemetry, no native protocol, doesn't fix drift); how to force a grid charge via output-priority SUB. - LVX6048 README: closed-loop pending item -> resolved decision; new "SoC calibration & known firmware quirks" section (POP single-digit/POP01, MCHGC charge-lock, re_discharge=re-discharge can't exceed float, PIRI lag, powermon adhoc wedge); skills pointer. - lvx-control README: POP encoding fix, POP crc-but-applies quirk, verify-by- behavior, grid-charge-via-SUB usage. - troubleshoot-inverter skill: corrected the stale "dead string per inverter" claim — both strings healthy; low PV is tilt/heat/shade/curtailment. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-25 21:46:02 -04:00
noise	aa97d65b0c	Add solar monitoring/troubleshooting skills for agents Four Skill-tool skills under .claude/skills/ that let an agent monitor and troubleshoot the install (2x LVX6048, 6x EG4 LifePower4, OpenEVSE), grounded in the real MQTT/HA topology rather than generic advice: - solar-health-check : whole-system sweep + cross-checks + R/Y/G verdict, incl. cross-unit "silently-dead inverter" detection - troubleshoot-inverter: FWS fault decode, parallel sync, USB link recovery - troubleshoot-battery : per-pack imbalance vs SoC-counter-drift, RS485 silence - power-usage : PV/load/grid/battery balance + EVSE sessions Shared lib: - solar-snapshot : live MQTT capture (creds from powermon.yaml, no hardcoding) - ha-history : HA recorder lookback (token from ~/.config/ha/token) REFERENCE.md documents topology, real HA entity_ids (doubled slug), known issues, and a safe-remediation-only action policy (restarts yes; setters no). Action boundary: diagnose + restart wedged daemons / recover USB links; never touches inverter/battery setters or flash. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-24 11:46:20 -04:00

Author

SHA1

Message

Date

noise

8dafce7dfe

Docs: reflect this session's findings across the repo

- top-level README.md (new): system overview, subsystem map, skills pointer,
  notable findings.
- eg4battery README/NOTES: 3 -> 6 packs (pack 6 oddball 0x01/115200); SoC drift
  + calibration section; closed-loop comms evaluated and rejected (loses per-pack
  telemetry, no native protocol, doesn't fix drift); how to force a grid charge
  via output-priority SUB.
- LVX6048 README: closed-loop pending item -> resolved decision; new "SoC
  calibration & known firmware quirks" section (POP single-digit/POP01, MCHGC
  charge-lock, re_discharge=re-discharge can't exceed float, PIRI lag, powermon
  adhoc wedge); skills pointer.
- lvx-control README: POP encoding fix, POP crc-but-applies quirk, verify-by-
  behavior, grid-charge-via-SUB usage.
- troubleshoot-inverter skill: corrected the stale "dead string per inverter"
  claim — both strings healthy; low PV is tilt/heat/shade/curtailment.

Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>

2026-06-25 21:46:02 -04:00

noise

aa97d65b0c

Add solar monitoring/troubleshooting skills for agents

Four Skill-tool skills under .claude/skills/ that let an agent monitor and
troubleshoot the install (2x LVX6048, 6x EG4 LifePower4, OpenEVSE), grounded
in the real MQTT/HA topology rather than generic advice:

- solar-health-check  : whole-system sweep + cross-checks + R/Y/G verdict,
                        incl. cross-unit "silently-dead inverter" detection
- troubleshoot-inverter: FWS fault decode, parallel sync, USB link recovery
- troubleshoot-battery : per-pack imbalance vs SoC-counter-drift, RS485 silence
- power-usage         : PV/load/grid/battery balance + EVSE sessions

Shared lib:
- solar-snapshot : live MQTT capture (creds from powermon.yaml, no hardcoding)
- ha-history     : HA recorder lookback (token from ~/.config/ha/token)
REFERENCE.md documents topology, real HA entity_ids (doubled slug), known
issues, and a safe-remediation-only action policy (restarts yes; setters no).

Action boundary: diagnose + restart wedged daemons / recover USB links;
never touches inverter/battery setters or flash.

Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>

2026-06-24 11:46:20 -04:00

2 Commits