shaggy-solar/LVX6048/README.md

# LVX6048 → Home Assistant

Reproducible install package for monitoring 2× MPP Solar LVX6048 inverters over
USB-HID (PI18) via [`powermon`](https://github.com/jblance/powermon), publishing
to a Home Assistant MQTT broker with HA auto-discovery.

## What's in the box

```
LVX6048/
├── README.md                     ← start here
├── Install.md                    ← detailed walkthrough (what install.sh does)
├── Monitoring.md                 ← background / design notes
├── install.sh                    ← one-shot installer (idempotent, safe to re-run)
│
├── etc/                          mirror of target system paths
│   ├── udev/rules.d/99-lvx6048.rules
│   └── systemd/system/
│       ├── lvx-resolve-links.service
│       ├── lvx-control.service
│       ├── powermon.service
│       ├── powermon2.service
│       ├── powermon.service.d/10-resolver.conf
│       └── powermon2.service.d/10-resolver.conf
│
├── config/powermon/              lands at ~/.config/powermon/ (mode 600)
│   ├── powermon.yaml             ← unit #1 — edit MQTT creds before deploying
│   └── powermon2.yaml            ← unit #2 — edit MQTT creds before deploying
│
├── bin/
│   └── lvx-resolve-links         ← installed as /usr/local/sbin/lvx-resolve-links
│                                   (install.sh rewrites the shebang to the uv-installed python)
│
├── powermon-patches/             ← drop-in files for the uv tool install
│   ├── README.md                 ← what each patch does + upgrade path
│   ├── pi18.py, usbport.py, mqttbroker.py,
│   └── port_config_model.py, ports_init.py
│
├── lvx-flash/                    ← settings-profile CLI
│   ├── flash.py                  ← dump / diff / apply / compare / sync-check
│   ├── README.md
│   └── profiles/
│       ├── current.yaml          ← legacy snapshot
│       └── eg4-lp4-v2.yaml       ← canonical EG4 LP4 v2 LiFePO4 bank profile
│
├── lvx-control/                  ← HA → powermon adhoc command bridge
│   ├── lvx-control               ← single-file Python daemon
│   └── README.md                 ← supported actions / topic layout
│
├── homeassistant/                ← HA-side control entities + dashboard
│   ├── mqtt_controls.yaml        ← selects + numbers for the controls
│   ├── lovelace_controls.yaml    ← dashboard view
│   └── README.md
│
└── smoketest/                    ← adhoc test configs (one-off powermon -C usage)
    ├── console.yaml
    └── smoketest.yaml
```

## Quick start (reproducing on a fresh machine)

```bash
# 1. Clone / scp this folder into place (e.g. /home/<user>/solar/LVX6048)
cd ~/solar/LVX6048

# 2. Install uv if not already: https://docs.astral.sh/uv/
# 3. Run the installer
./install.sh

# 4. Edit the two things install.sh warns about:
#    a. ~/.config/powermon/powermon{,2}.yaml — MQTT broker IP / user / password
#    b. /usr/local/sbin/lvx-resolve-links    — SERIAL_UNIT_1 / SERIAL_UNIT_2 (see below)
#       lvx-flash/flash.py                   — same two constants

# 5. Capture each inverter's PI18 serial (with services stopped):
sudo systemctl stop lvx-resolve-links.service powermon.service powermon2.service
for d in /dev/hidraw0 /dev/hidraw1; do
    TMP=$(mktemp --suffix=.yaml)
    printf 'loop: once\ndevice:\n  name: probe\n  port: {type: usb, path: %s, protocol: PI18}\ncommands:\n  - {command: ID, trigger: {loops: 1}}\n' "$d" > "$TMP"
    echo "=== $d ==="
    ~/.local/bin/powermon -C "$TMP" 2>&1 | grep serial_number
    rm -f "$TMP"; sleep 2
done
# Edit SERIAL_UNIT_{1,2} in /usr/local/sbin/lvx-resolve-links and lvx-flash/flash.py,
# then:
sudo systemctl start lvx-resolve-links.service powermon.service powermon2.service
```

## How the pieces fit together

```
┌─────────────────────────┐     ┌─────────────────────────┐
│ LVX6048 #1 (USB-HID)    │ ──▶ │ /dev/hidraw{0|1}        │
│ LVX6048 #2 (USB-HID)    │ ──▶ │ (vid:pid 0665:5161)     │
└─────────────────────────┘     └──────────┬──────────────┘
                                           │
                                           │  (99-lvx6048.rules → group=dialout)
                                           │
                                           ▼
                          ┌──────────────────────────────────┐
                          │ lvx-resolve-links.service        │
                          │ (oneshot, runs before powermon)  │
                          │                                  │
                          │  probes each hidraw w/ PI18 ID   │
                          │  creates /dev/lvx6048-{1,2}      │
                          │  symlinks keyed to serial        │
                          └──────────┬───────────────────────┘
                                     │
                                     │ After= / Requires=
                                     ▼
                          ┌──────────────────────────────────┐
                          │ powermon.service  (unit #1)      │
                          │ powermon2.service (unit #2)      │
                          │                                  │
                          │  poll GS / MOD / PIRI / ET       │
                          │  publish to HA auto-discovery    │
                          │  topics under homeassistant/*    │
                          └──────────┬───────────────────────┘
                                     │  MQTT (port 1883)
                                     ▼
                          ┌──────────────────────────────────┐
                          │ Home Assistant Mosquitto broker  │
                          │ ~23 auto-discovered sensors/unit │
                          └──────────────────────────────────┘
```

Separate from the monitoring pipeline, **`lvx-flash/`** is a manual settings
tool: dump the inverter's current config into a YAML profile, diff against a
target profile, apply changes safely (stops powermon, writes via PI18 setters,
verifies via PIRI readback). Also supports `compare` (diff live settings
between two inverters) and `sync-check` (verify parallel-stack health).

## Cable moves and inverter power-cycles

Identification is PI18-serial-based, so moving USB cables between hub ports
never requires config edits. The udev rule fires `lvx-resolve-links` and
restarts both powermon services automatically whenever a matching hidraw
device appears (`ACTION=="add"`), so a cable shuffle or inverter power-cycle
recovers on its own — no manual `systemctl restart` needed in the common case.

If recovery looks stuck (e.g. a unit was off long enough that its hidraw
disappeared but the new one didn't trigger the rule for some reason):

```bash
sudo systemctl restart lvx-resolve-links.service powermon.service powermon2.service
```

## Replacing an inverter

When a unit is swapped, capture its new PI18 serial (see step 5 of Quick start)
and update the two `SERIAL_UNIT_*` constants in:

- `/usr/local/sbin/lvx-resolve-links`
- `~/solar/LVX6048/lvx-flash/flash.py`

then restart the three services.

## Status — done / pending

**Done (2026-04-26):**

- **Parallel commissioning.** Both inverters operationally paralleled and
  load-sharing on a 3× EG4 LP4 v2 bank. See `2026-04-26-parallel.md`.
- **Main-CPU firmware parity.** Both units now at main 06306. Slave-CPU
  firmware still differs (06126 / 06021) but is benign: cluster handshake
  completes, current sharing is symmetric, no faults. The vendor's
  `LVX6048 FW63.06.zip` includes a `dsp.hex` slave bin if version parity
  is ever desired for cosmetic reasons.
- **Hot-plug recovery.** udev rule auto-restarts the resolver + powermon
  services when an inverter re-enumerates. Resolver also has a retry loop
  to handle the brief race when both units come up nearly together.
- **`parallel_instance_number` decoder.** Replaced upstream's misleading
  2-value flag with a proper instance-index decoder (0 = master, 1+ =
  slaves) in both GS and PGS. `flash.py sync-check` updated to match.
- **MOD code 06.** Added "Charge" mapping (was crashing sync-check).
  Educated guess on the label — revisit if it shows up in unrelated states.
- **Battery profile.** `lvx-flash/profiles/eg4-lp4-v2.yaml` captures the
  conservative open-loop LFP policy in use (USER mode, 56.4 V bulk,
  54.0 V float, 48.0 V cutoff, 60 A MCHGC).
- **HA remote control.** `lvx-control` daemon bridges HA-friendly MQTT
  topics (`solar/control/lvx6048/<action>`) to powermon's adhoc-command
  queue, mirroring every change to both inverters in lock-step. Day-to-day
  controls (POP / PCP / PSP / MCHGC / MUCHGC) exposed; risky setters
  (battery thresholds, type, output mode, factory reset) deliberately not.
  Companion HA configs live in `homeassistant/`.

**Pending / nice-to-have:**

- **PGS field layout.** The LVX6048-specific 30-field PGS response is only
  partially named in `powermon-patches/pi18.py` — fields 4, 13–22, 23–28,
  and 30 are still exposed as raw strings. Now that the cluster is actually
  paralleled, more of these fields produce meaningful values; worth a
  second pass to identify them by comparing PGS0 vs PGS1 captures from
  master and slave.
- **Control / set commands via HA.** PI18 setters (POP, PCP, MCHGC, MUCHGC,
  PF) are implemented in `lvx-flash/flash.py` for offline use, but aren't
  exposed as HA button/select entities. Deferred until monitoring has been
  stable for at least a week.
- **Closed-loop BMS comms.** Currently open-loop — inverters estimate SoC
  from voltage, batteries don't push real-time SoC / charge limits to the
  inverter. Closed-loop would give better SoC accuracy and dynamic CC
  tapering near full. Path is the dedicated CAN port on the master pack →
  inverter BMS port (separate cable from the inter-pack daisy-chain).
  Deferred.