noise dbfe4b22f7 C_BULK1 100u 25V->35V — must survive SMBJ18A clamp (<=29.2V at rated surge) ...

25V electrolytic sat directly on VIN_PROT where the TVS clamps up to 29.2V;
35V-rated part in the same 8x10 can. Regen diff = 1 line. ERC 133->133;
analyzer diff unchanged.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>

2026-07-04 09:31:55 -04:00

..

CM5_GPIO.kicad_sch

Add GPS + PPS distribution sheet (all rev-A blocks captured)

2026-07-02 07:22:16 -04:00

CM5_HighSpeed.kicad_sch

Remove orphaned U12 (RT9742) + C13 — fed stripped HDMI_5v rail

2026-07-04 09:26:48 -04:00

CM5IO.kicad_pro

Add GPS + PPS distribution sheet (all rev-A blocks captured)

2026-07-02 07:22:16 -04:00

CM5IO.kicad_sch

Cut J11 (USB-C prog) VBUS from +5v; drop R9 bleed — fixes host-VBUS vs buck back-feed

2026-07-04 09:31:11 -04:00

CM5IO.kicad_sym

Power stage 4: TPS54202 15V->+3V3_AUX 1A quiet-rail buck (power sheet complete)

2026-07-02 07:03:31 -04:00

fp-lib-table

many eda additions

2026-06-29 16:31:02 -04:00

GPS_PPS.kicad_sch

Add GPS + PPS distribution sheet (all rev-A blocks captured)

2026-07-02 07:22:16 -04:00

M2_Ekey.kicad_sch

Power stage 3: LM61460-Q1 15V->+3V3_RF 4A buck; EN from CM5 PCIE_PWR_EN

2026-07-01 22:11:24 -04:00

Power.kicad_sch

C_BULK1 100u 25V->35V — must survive SMBJ18A clamp (<=29.2V at rated surge)

2026-07-04 09:31:55 -04:00

sym-lib-table

many eda additions

2026-06-29 16:31:02 -04:00