# Generated Cmake Pico project file

cmake_minimum_required(VERSION 3.13)

set(CMAKE_C_STANDARD 11)
set(CMAKE_CXX_STANDARD 17)
set(CMAKE_EXPORT_COMPILE_COMMANDS ON)

# Initialise pico_sdk from installed location
# (note this can come from environment, CMake cache etc)

# == DO NOT EDIT THE FOLLOWING LINES for the Raspberry Pi Pico VS Code Extension to work ==
if(WIN32)
    set(USERHOME $ENV{USERPROFILE})
else()
    set(USERHOME $ENV{HOME})
endif()
set(sdkVersion 2.1.1)
set(toolchainVersion 14_2_Rel1)
set(picotoolVersion 2.1.1)
set(picoVscode ${USERHOME}/.pico-sdk/cmake/pico-vscode.cmake)
if (EXISTS ${picoVscode})
    include(${picoVscode})
endif()
# ====================================================================================
set(PICO_BOARD waveshare_rp2040_eth CACHE STRING "Board type")

# Pull in Raspberry Pi Pico SDK (must be before project)
include(pico_sdk_import.cmake)

project(barnum C CXX ASM)

# Initialise the Raspberry Pi Pico SDK
pico_sdk_init()

# Add executable. Default name is the project name, version 0.1

add_executable(barnum barnum.c ch9120.c)

# Add initial version without ethernet
add_executable(barnum-initial barnum-initial.c)

pico_set_program_name(barnum "barnum")
pico_set_program_version(barnum "0.1")

pico_set_program_name(barnum-initial "barnum-initial")
pico_set_program_version(barnum-initial "0.1")

# Generate PIO header
pico_generate_pio_header(barnum ${CMAKE_CURRENT_LIST_DIR}/blink.pio)
pico_generate_pio_header(barnum ${CMAKE_CURRENT_LIST_DIR}/ws2812.pio)
pico_generate_pio_header(barnum-initial ${CMAKE_CURRENT_LIST_DIR}/blink.pio)
pico_generate_pio_header(barnum-initial ${CMAKE_CURRENT_LIST_DIR}/ws2812.pio)

# Modify the below lines to enable/disable output over UART/USB
pico_enable_stdio_uart(barnum 1)
pico_enable_stdio_usb(barnum 1)

# Enable stdio for initial version
pico_enable_stdio_uart(barnum-initial 0)
pico_enable_stdio_usb(barnum-initial 1)

# Add the standard library to the build
target_link_libraries(barnum
        pico_stdlib)

target_link_libraries(barnum-initial
        pico_stdlib)

# Add the standard include files to the build
target_include_directories(barnum PRIVATE
        ${CMAKE_CURRENT_LIST_DIR}
)

target_include_directories(barnum-initial PRIVATE
        ${CMAKE_CURRENT_LIST_DIR}
)

# Add any user requested libraries
target_link_libraries(barnum 
        hardware_uart
        hardware_pio
        hardware_timer
        )

target_link_libraries(barnum-initial 
        hardware_spi
        hardware_i2c
        hardware_dma
        hardware_pio
        hardware_interp
        hardware_timer
        hardware_watchdog
        )

pico_add_extra_outputs(barnum)
pico_add_extra_outputs(barnum-initial)