55 lines
1.5 KiB
C
55 lines
1.5 KiB
C
|
#ifndef _CH9120_H_
|
||
|
|
#define _CH9120_H_
|
||
|
|
|
||
|
|
#include <stdlib.h> // malloc() free()
|
||
|
|
#include <stdio.h>
|
||
|
|
#include "pico/stdlib.h"
|
||
|
|
#include "hardware/uart.h"
|
||
|
|
#include "hardware/irq.h"
|
||
|
|
|
||
|
|
/// \tag::uart_advanced[]
|
||
|
|
#define UART_ID1 uart1
|
||
|
|
#define Inti_BAUD_RATE 9600
|
||
|
|
#define Transport_BAUD_RATE 115200
|
||
|
|
#define DATA_BITS 8
|
||
|
|
#define STOP_BITS 1
|
||
|
|
#define PARITY UART_PARITY_NONE
|
||
|
|
|
||
|
|
// We are using pins 0 and 1, but see the GPIO function select table in the
|
||
|
|
// datasheet for information on which other pins can be used.
|
||
|
|
|
||
|
|
#define UART_TX_PIN1 20
|
||
|
|
#define UART_RX_PIN1 21
|
||
|
|
|
||
|
|
#define CFG_PIN 18
|
||
|
|
#define RES_PIN 19
|
||
|
|
#define GPIO_OUT 1
|
||
|
|
#define GPIO_IN 0
|
||
|
|
|
||
|
|
#define UCHAR unsigned char
|
||
|
|
#define UBYTE uint8_t
|
||
|
|
#define UWORD uint16_t
|
||
|
|
#define UDOUBLE uint32_t
|
||
|
|
|
||
|
|
#define TCP_SERVER 0
|
||
|
|
#define TCP_CLIENT 1
|
||
|
|
#define UDP_SERVER 2
|
||
|
|
#define UDP_CLIENT 3
|
||
|
|
|
||
|
|
#define Mode1 0x10 //Port 1: Setup Mode 0x00:TCP Server 0x01:TCP Client 0x02:UDP Server 0x03:UDP Client
|
||
|
|
#define LOCAL_IP 0x11 //Local IP
|
||
|
|
#define SUBNET_MASK 0x12 //Subnet Mask
|
||
|
|
#define GATEWAY 0x13 //Gateway
|
||
|
|
#define LOCAL_PORT1 0X14 //Port 1:Local Port
|
||
|
|
#define TARGET_IP1 0x15 //Port 1:Target IP
|
||
|
|
#define TARGET_PORT1 0x16 //Port 1:Target Port
|
||
|
|
#define PORT_RANDOM_ENABLE1 0x17 //Port 1:Port Random Enable
|
||
|
|
#define UART1_BAUD1 0x21 //Port 1:Baud rate of serial port 1
|
||
|
|
|
||
|
|
void CH9120_init(void);
|
||
|
|
void RX_TX();
|
||
|
|
void DEV_Delay_ms(UDOUBLE xms);
|
||
|
|
void DEV_Delay_us(UDOUBLE xus);
|
||
|
|
|
||
|
|
#endif
|