noisedestroyers/DP44
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
main
DP44/enriched-partialglm/Common/DTS.CommonCore/Interface/DTS.Viewer/TestDefinition.md
noisedestroyers bc3ac1d4c9 init
2026-04-17 14:55:32 -04:00

11 KiB
Raw Permalink Blame History

source_files, generated_at, model, schema_version, sha256
source_files generated_at model schema_version sha256
Common/DTS.CommonCore/Interface/DTS.Viewer/TestDefinition/ITestMetadata.cs
Common/DTS.CommonCore/Interface/DTS.Viewer/TestDefinition/ITestGraphs.cs
Common/DTS.CommonCore/Interface/DTS.Viewer/TestDefinition/ITestSetupMetadata.cs
Common/DTS.CommonCore/Interface/DTS.Viewer/TestDefinition/ITestSummary.cs
Common/DTS.CommonCore/Interface/DTS.Viewer/TestDefinition/ITestRunMetadata.cs
Common/DTS.CommonCore/Interface/DTS.Viewer/TestDefinition/ITestModule.cs
Common/DTS.CommonCore/Interface/DTS.Viewer/TestDefinition/ITestCalculatedChannel.cs
Common/DTS.CommonCore/Interface/DTS.Viewer/TestDefinition/ITestChannel.cs
2026-04-16T12:25:55.415422+00:00 zai-org/GLM-5-FP8 1 2ef74d227b33f018

Test Definition Interfaces Documentation

1. Purpose

This module defines the core data contract interfaces for test definition and metadata within the DTS (Data Test System) viewer application. It provides the abstraction layer for representing test runs, test setups, hardware modules, channels (both physical and calculated), and graph configurations. These interfaces model complex data acquisition scenarios including sensor configurations, calibration parameters, sample data statistics, and test execution metadata, enabling decoupling between data models and their consumers.

2. Public Interface

ITestMetadata

Container interface aggregating test run and setup metadata.

Member Type Description
TestRun ITestRunMetadata Reference to test run metadata
TestSetup ITestSetupMetadata Reference to test setup metadata

ITestGraphs

Represents a graph configuration grouping channels for visualization.

Member Type Description
Name string Graph name identifier
HardwareChannelName string Associated hardware channel name
ChannelIds List<string> List of channel IDs belonging to this graph
Channels List<ITestChannel> List of resolved test channel objects

ITestSetupMetadata

Defines metadata for a test setup configuration.

Member Type Description
SetupName string Name of the test setup
TimeStamp DateTime Timestamp when setup was created/modified
TestGraphs List<ITestGraphs> Collection of graph configurations
CalibrationBehavior CalibrationBehaviors Calibration behavior setting (from DTS.Common.Enums.Sensors)

ITestSummary : IBaseClass

Provides summary information about a test for listing/display purposes.

Member Type Description
Id string Unique test identifier
Name string Test name
Description string Test description
ChannelCount int Total number of channels
TestDate DateTime Date the test was executed
DataType string Data type identifier
IsSelected bool Selection state for UI
Graphs List<ITestGraphs> Collection of graphs
Channels List<ITestChannel> Collection of physical channels
CalculatedChannels List<ITestChannel> Collection of calculated channels
Parent IBaseViewModel Reference to parent view model

ITestRunMetadata : INotifyPropertyChanged

Defines metadata for a single test run execution.

Member Type Description
Name string Run name
Id string Run identifier
Description string Run description
InlineSerializedData bool Whether data is serialized inline
TestGuid string Globally unique test identifier
FaultFlags int Bitmask of fault flags
Software string Software name used for acquisition
SoftwareVersion string Software version
DataType string Data type identifier
FileDate DateTime File creation/modification date
FilePath string Path to the data file
Modules List<ITestModule> Collection of hardware modules
Channels List<ITestChannel> Collection of channels
CalculatedChannels List<ITestChannel> Collection of calculated channels

ITestModule : INotifyPropertyChanged

Represents a hardware module used during test acquisition.

Member Type Description
SerialNumber string Module serial number
BaseSerialNumber string Base serial number
AaFilterRateHz int Anti-aliasing filter rate in Hz
Number int Module number
NumberOfSamples int Total samples recorded
UnsubsampledNumberOfSamples int Sample count before subsampling
RequestedPostTriggerSeconds double Requested post-trigger duration
RequestedPreTriggerSeconds double Requested pre-trigger duration
PostTriggerSeconds double Actual post-trigger duration
PreTriggerSeconds double Actual pre-trigger duration
RecordingMode string Recording mode identifier
SampleRateHz int Sample rate in Hz
StartRecordSampleNumber int Sample number at recording start
NumberOfChannels int Number of channels on module
InlineSerializedData bool Whether data is inline serialized
StartRecordTimestampSec int Recording start timestamp (seconds)
StartRecordTimestampNanoSec int Recording start timestamp (nanoseconds)
TriggerTimestampSec int Trigger timestamp (seconds)
TriggerTimestampNanoSec int Trigger timestamp (nanoseconds)
TriggerSampleNumbers List<ulong> List of trigger sample numbers
PTPMasterSync bool PTP master sync status
TiltSensorAxisXDegreesPre int Pre-test X-axis tilt in degrees
TiltSensorAxisYDegreesPre int Pre-test Y-axis tilt in degrees
TiltSensorAxisZDegreesPre int Pre-test Z-axis tilt in degrees
TiltSensorAxisXDegreesPost int Post-test X-axis tilt in degrees
TiltSensorAxisYDegreesPost int Post-test Y-axis tilt in degrees
TiltSensorAxisZDegreesPost int Post-test Z-axis tilt in degrees
TemperatureLocation1Pre through TemperatureLocation4Pre int Pre-test temperatures at 4 locations
TemperatureLocation1Post through TemperatureLocation4Post int Post-test temperatures at 4 locations
Channels List<ITestChannel> Collection of channels
CalculatedChannels List<ITestChannel> Collection of calculated channels

ITestCalculatedChannel : INotifyPropertyChanged

Defines a calculated/virtual channel derived from other channels.

Member Type Description
SerialNumber string Serial number
ChannelId string Channel identifier
Description string Channel description
ChannelGroupName string Group name for channel
ChannelType string Channel type identifier
Number int Channel number
DigitalMultiplier string Digital multiplier setting
DigitalMode string Digital mode setting
Start DateTime Start timestamp
Bridge string Bridge configuration
BridgeResistanceOhms int Bridge resistance in ohms
ZeroPoint double Zero point value
ChannelDescriptionString string Formatted description string
ChannelName2 string Secondary channel name
HardwareChannelName string Hardware channel name
DesiredRange double Desired measurement range
Sensitivity double Sensitivity value
SoftwareFilter string Software filter configuration
ProportionalToExcitation bool Whether proportional to excitation
IsInverted bool Whether signal is inverted
LinearizationFormula string Linearization formula
IsSubsampled bool Whether channel is subsampled
AbsoluteDisplayOrder int Display order index
LastCalibrationDate DateTime Last calibration date
SensorId string Sensor identifier
OffsetToleranceLowMv int Low offset tolerance in mV
OffsetToleranceHighMv int High offset tolerance in mV
DataFlag int Data flag value
ExcitationVoltage int Excitation voltage
Eu string Engineering units
CalSignalEnabled bool Calibration signal enabled
ShuntEnabled bool Shunt enabled
VoltageInsertionCheckEnabled bool Voltage insertion check enabled
RemoveOffset bool Whether to remove offset
ZeroMethod string Zero method identifier
ZeroAverageWindowBegin double Zero averaging window start
ZeroAverageWindowEnd double Zero averaging window end
InitialEu int Initial engineering units
InitialOffset string Initial offset value
UnsubsampledSampleRateHz int Sample rate before subsampling
MeasuredShuntDeflectionMv double Measured shunt deflection in mV
TargetShuntDeflectionMv double Target shunt deflection in mV
MeasuredExcitationVoltage double Measured excitation voltage
FactoryExcitationVoltage double Factory excitation voltage
TimeOfFirstSample double Timestamp of first sample
Multiplier int Multiplier value
UserOffsetEu int User-defined offset in EU
UnitConversion int Unit conversion flag
AtCapacity bool Whether at capacity
CapacityOutputIsBasedOn int Capacity output reference
SourceChannelNumber string Source channel number
SourceModuleNumber string Source module number
SourceModuleSerialNumber string Source module serial number
Calculation string Calculation formula/expression
SampleRateHz int Sample rate in Hz
SensitivityUnits string Sensitivity units
SensorCapacity int Sensor capacity

ITestChannel : INotifyPropertyChanged

Represents a physical measurement channel with full configuration and statistics.

Identity & Hierarchy:

Member Type Description
Group string Group identifier
SubGroup string Sub-group identifier
TestId string Test identifier
TestSetupName string Parent test setup name
ModuleSerialNumber string Parent module serial number
SerialNumber string Channel serial number
ChannelId string Channel identifier
ChannelDisplayName string Display name
Description string Channel description
ChannelGroupName string Channel group name
ChannelType string Channel type
Number int Channel number
ChannelNumber int Channel number (alternate)
ParentTestSetup ITestSetupMetadata Reference to parent test setup
ParentModule ITestModule Reference to parent module
Parent IBaseViewModel Reference to parent view model

Graph Configuration:

Member Type Description
IsGraphChannel bool Whether this is a graph channel
GraphName string Associated graph name
ChannelColor Color Display color for channel
Xmax double Maximum X value
`
Reference in New Issue View Git Blame Copy Permalink