---
source_files:
  - Common/DTS.Common.Serialization/Control/Event/Module/AnalogInputChannel/ReviewableShuntDeflectionAttribute.cs
  - Common/DTS.Common.Serialization/Control/Event/Module/AnalogInputChannel/ReviewableFilterFrequencyAttribute.cs
  - Common/DTS.Common.Serialization/Control/Event/Module/AnalogInputChannel/ReviewableIsoCodeAttribute.cs
  - Common/DTS.Common.Serialization/Control/Event/Module/AnalogInputChannel/ReviewableDescriptionAttribute.cs
  - Common/DTS.Common.Serialization/Control/Event/Module/AnalogInputChannel/ReviewableSerialNumberAttribute.cs
  - Common/DTS.Common.Serialization/Control/Event/Module/AnalogInputChannel/ReviewableUnitsAttribute.cs
  - Common/DTS.Common.Serialization/Control/Event/Module/AnalogInputChannel/ReviewableMinMaxEuAttribute.cs
  - Common/DTS.Common.Serialization/Control/Event/Module/AnalogInputChannel/ReviewableCfcAttribute.cs
  - Common/DTS.Common.Serialization/Control/Event/Module/AnalogInputChannel/ReviewableTargetShuntDeflectionAttribute.cs
  - Common/DTS.Common.Serialization/Control/Event/Module/AnalogInputChannel/ReviewableMeasuredShuntDeflectionAttribute.cs
  - Common/DTS.Common.Serialization/Control/Event/Module/AnalogInputChannel/ReviewableShuntDeflectionPercentageAttribute.cs
generated_at: "2026-04-16T03:42:18.353896+00:00"
model: "Qwen/Qwen3-Coder-Next-FP8"
schema_version: 1
sha256: "b040e834d4537e76"
---

# `DTS.Slice.Control.Event.Module.AnalogInputChannel.ReviewableAttribute` Implementations

## 1. Purpose  
This module provides a set of concrete `ReviewableAttribute` subclasses used to expose specific channel metadata and calibration-related values for review in the DTS Slice control/event system. Each attribute encapsulates a named, human-readable property of an `AnalogInputChannel` (e.g., serial number, filter settings, shunt calibration metrics), formatted as a string via a delegate. These attributes are intended for use in UI review workflows or audit logs where static or quasi-static channel configuration and calibration state must be presented consistently.

## 2. Public Interface  

All classes inherit from `Slice.Control.Event.Module.Channel.ReviewableAttribute`. Each constructor accepts a single `Event.Module.Channel` parameter and passes a display name and a `Func<string>` to the base constructor.

| Class | Constructor | Display Name | Behavior |
|-------|-------------|--------------|----------|
| `ReviewableShuntDeflectionAttribute` | `ReviewableShuntDeflectionAttribute(Channel)` | `"Shunt Deflection (mV)"` | Returns `channel.MeasuredShuntDeflectionMv.ToString("F1")`. Requires `channel` to implement `DTS.DAS.Concepts.DAS.Channel.IShuntAware`. |
| `ReviewableFilterFrequencyAttribute` | `ReviewableFilterFrequencyAttribute(Channel)` | `"Filter Frequency"` | Returns `(int)(channel.CurrentFilter as SaeJ211Filter).CutoffFrequencyHz.ToString("N")`. Requires `channel.CurrentFilter` to be a `SaeJ211Filter`. |
| `ReviewableIsoCodeAttribute` | `ReviewableIsoCodeAttribute(Channel)` | `"ISO Code"` | Returns `(channel as AnalogInputChannel).IsoCode.ToString()`. Requires `channel` to be an `AnalogInputChannel`. |
| `ReviewableDescriptionAttribute` | `ReviewableDescriptionAttribute(Channel)` | `"Description"` | Returns `channel.ChannelDescriptionString`. |
| `ReviewableSerialNumberAttribute` | `ReviewableSerialNumberAttribute(Channel)` | `"Serial Number"` | Returns `(channel as AnalogInputChannel).SerialNumber.ToString()`. Requires `channel` to be an `AnalogInputChannel`. |
| `ReviewableUnitsAttribute` | `ReviewableUnitsAttribute(Channel)` | `"Units"` | Returns `channel.EngineeringUnits.ToString()`. Requires `channel` to implement `DTS.DAS.Concepts.DAS.Channel.IEngineeringUnitAware`. |
| `ReviewableMinMaxEuAttribute` | `ReviewableMinMaxEuAttribute(Channel)` | `"Max/Min (EU)"` | Returns `channel.DataMaxFilteredEu.ToString("F1") + "/" + channel.DataMinFilteredEu.ToString("F1")`. |
| `ReviewableCfcAttribute` | `ReviewableCfcAttribute(Channel)` | `"CFC"` | Returns `"N/A"` if `channel.CurrentFilter.Type == ChannelFilter.AdHoc`; otherwise returns `(new CfcValueAttributeCoder()).DecodeAttributeValue((channel.CurrentFilter as SaeJ211Filter).Type).ToString()`. Requires `channel.CurrentFilter` to be a `SaeJ211Filter`. |
| `ReviewableTargetShuntDeflectionAttribute` | `ReviewableTargetShuntDeflectionAttribute(Channel)` | `"Target Shunt Deflection (mV)"` | Returns `channel.TargetShuntDeflectionMv.ToString("F1")`. Requires `channel` to implement `IShuntAware`. |
| `ReviewableTargetCalSignalAttribute` | `ReviewableTargetCalSignalAttribute(Channel)` | `"Target Calibration Signal (mV)"` | Returns `channel.TargetCalSignalMv.ToString("F1")`. Requires `channel` to implement `DTS.DAS.Concepts.DAS.Channel.ICalSignalAware`. |
| `ReviewableMeasuredShuntDeflectionAttribute` | `ReviewableMeasuredShuntDeflectionAttribute(Channel)` | `"Measured Shunt Deflection (mV)"` | Returns `channel.MeasuredShuntDeflectionMv.ToString("F1")`. Requires `channel` to implement `IShuntAware`. |
| `ReviewableMeasuredCalSignalAttribute` | `ReviewableMeasuredCalSignalAttribute(Channel)` | `"Measured Calibration Signal (mV)"` | Returns `channel.MeasuredCalSignalMv.ToString("F1")`. Requires `channel` to implement `ICalSignalAware`. |
| `ReviewableShuntDeflectionPercentageAttribute` | `ReviewableShuntDeflectionPercentageAttribute(Channel)` | `"Shunt Error (%)"` | Returns `100.0 * (MeasuredShuntDeflectionMv - TargetShuntDeflectionMv) / TargetShuntDeflectionMv.ToString("F1")`. Requires `channel` to implement `IShuntAware`. |
| `ReviewableCalSignalPercentageAttribute` | `ReviewableCalSignalPercentageAttribute(Channel)` | `"Calibration Signal Error (%)"` | Returns `100.0 * (MeasuredCalSignalMv - TargetCalSignalMv) / TargetCalSignalMv.ToString("F1")`. Requires `channel` to implement `ICalSignalAware`. |

## 3. Invariants  

- **All attributes are read-only**: Each attribute’s value is computed on-demand via a delegate passed to the base class; no internal state is stored beyond the delegate capture.
- **Type assumptions**: Each attribute assumes the `channel` parameter supports specific interfaces or concrete types:
  - `IShuntAware` for shunt-related attributes (`ReviewableShuntDeflectionAttribute`, `ReviewableTargetShuntDeflectionAttribute`, `ReviewableMeasuredShuntDeflectionAttribute`, `ReviewableShuntDeflectionPercentageAttribute`).
  - `ICalSignalAware` for calibration signal attributes (`ReviewableTargetCalSignalAttribute`, `ReviewableMeasuredCalSignalAttribute`, `ReviewableCalSignalPercentageAttribute`).
  - `IEngineeringUnitAware` for `ReviewableUnitsAttribute`.
  - `SaeJ211Filter` for `ReviewableFilterFrequencyAttribute` and `ReviewableCfcAttribute`.
  - `AnalogInputChannel` (via `as`) for `ReviewableIsoCodeAttribute` and `ReviewableSerialNumberAttribute`.
- **Null-safety**: None of the attributes perform explicit null checks. If `channel` is `null`, or if the required interface/type cast fails (e.g., `channel.CurrentFilter` is not a `SaeJ211Filter`), a `NullReferenceException` or `InvalidCastException` will occur at evaluation time.
- **Formatting consistency**: All numeric values are formatted with `"F1"` (1 decimal place) or `"N"` (thousands separator, no decimals) as shown.

## 4. Dependencies  

### Internal Dependencies (from source):
- `DTS.Slice.Control.Event.Module.Channel.ReviewableAttribute` (base class, not shown but referenced).
- `DTS.DAS.Concepts.DAS.Channel.IShuntAware`, `ICalSignalAware`, `IEngineeringUnitAware` (interfaces).
- `DTS.DAS.Concepts.DAS.Channel.SaeJ211Filter`, `ChannelFilter` (types).
- `DTS.Utilities.CfcValueAttributeCoder` (used in `ReviewableCfcAttribute`).
- `DTS.Slice.Control.Event.Module.AnalogInputChannel` (namespace context and partial class definitions).

### External Dependencies:
- `System` (core runtime).
- `DTS.Utilities` (assembly reference required for `CfcValueAttributeCoder` and `SaeJ211Filter`).

### Inferred Usage:
- These attributes are likely instantiated and collected by a higher-level component that iterates over `AnalogInputChannel` instances and exposes their reviewable metadata (e.g., for calibration reports or UI inspection panels). The repeated pattern suggests a factory or registration mechanism exists elsewhere (not visible here).

## 5. Gotchas  

- **Ambiguous naming**: `ReviewableShuntDeflectionAttribute` (in first file) and `ReviewableMeasuredShuntDeflectionAttribute` (in later file) have identical implementation logic and display names. This duplication is likely unintentional or legacy; only one should be used, or naming should be clarified (e.g., “Shunt Deflection (mV)” vs. “Measured Shunt Deflection (mV)”).  
- **Missing null guards**: All attributes assume `channel` is non-null and implements required interfaces. A cast failure (e.g., `channel as DTS.DAS.Concepts.DAS.Channel.IShuntAware` returning `null`) will cause a `NullReferenceException` at delegate invocation time, not construction.  
- **`ReviewableCfcAttribute` logic**: The commented-out line suggests a previous implementation using `CfcValueAttributeCoder.DecodeAttributeValue` directly, but the current version adds a special case for `ChannelFilter.AdHoc`. This implies that `AdHoc` filters may not have a valid `Type` for decoding, and the attribute must handle this explicitly.  
- **`ReviewableFilterFrequencyAttribute` casts `channel.CurrentFilter` to `SaeJ211Filter` without checking**: If `CurrentFilter` is not a `SaeJ211Filter`, this will throw `InvalidCastException`.  
- **`ReviewableIsoCodeAttribute` comment is incorrect**: Its summary says “serial number attribute” but the class name and implementation clearly indicate it’s for ISO code. Likely copy-paste error in documentation.  
- **No validation of division-by-zero**: In `ReviewableShuntDeflectionPercentageAttribute` and `ReviewableCalSignalPercentageAttribute`, if `TargetShuntDeflectionMv` or `TargetCalSignalMv` is zero, a `DivideByZeroException` will occur.