CREATE PROCEDURE [dbo].[sp_SensorsAnalogUpdateInsert_98]
	@UserSerialNumber							NVARCHAR (50),
	@Model										NVARCHAR (50),
	@SensorModelId								INT,
	@Manufacturer								NVARCHAR (50),
	@Status										NVARCHAR (50),
	@MeasurementUnit							NVARCHAR (50),
	@OffsetToleranceLow							FLOAT,
	@OffsetToleranceHigh						FLOAT,
	@eId										NVARCHAR (50),
	@Capacity									FLOAT,
	@Comment									NVARCHAR (50),
	@BridgeType									SMALLINT,
	@BridgeLegMode								SMALLINT,
	@Shunt										SMALLINT,
	@Invert										BIT,
	@UserValue1									NVARCHAR (50),
	@UserValue2									NVARCHAR (50),
	@UserValue3									NVARCHAR (50),
	@FilterClass								NVARCHAR (50),
	@BridgeResistance							FLOAT,
	@IsoCode									NVARCHAR (50),
	@IsoChannelName								NVARCHAR (255),
	@UserCode									NVARCHAR (50),
	@UserChannelName							NVARCHAR (255),
	@CheckOffset								BIT,
	@SupportedExcitation						NVARCHAR (50),
	@InitialEU									FLOAT,
	@CalInterval								INT,
	@CalibrationSignal							BIT,
	@InternalShuntResistance					FLOAT,
	@ExternalShuntResistance					FLOAT,
	@UniPolar									BIT,
	@RangeLow									FLOAT,
	@RangeAve									FLOAT,
	@RangeHigh									FLOAT,
	@Created									DATETIME,
	@TimesUsed									BIGINT,
	@SensorCategory								INT,
	@BypassFilter								BIT,
	@CouplingMode								SMALLINT,
	@Version									INT,
	@LastModified								DATETIME,
	@ModifiedBy									NVARCHAR (50),
	@LocalOnly									BIT,
	@AxisNumber									SMALLINT,
	@NumberOfAxes								SMALLINT,
	@UserTags									VARBINARY (MAX),
	@DoNotUse									BIT,
	@Broken										BIT,
	@DiagnosticsMode							BIT,
	@SerialNumber								NVARCHAR (255),
	@FirstUseDate                               DateTime NULL,
	@LatestCalibrationId                        INT NULL,
	@ACCouplingModeEnabled                      BIT,
	@SensitivityTolerancePercent                FLOAT NULL, 
	@AssemblyName								NVARCHAR (50) NULL,
	@UsageCount									INT NULL,
	@MaximumUsage								INT NULL,
	@new_id										INT OUTPUT,
	@errorNumber								INT OUTPUT,
	@errorMessage								NVARCHAR (255) OUTPUT
AS
BEGIN
BEGIN TRY
	SET NOCOUNT ON
	SET @errorNumber = 0
	SET @errorMessage = ''

	DECLARE @SensorType AS TINYINT
	DECLARE @SensorId AS INT
	DECLARE @MaxCalIntervalDays AS INT
	-- FB14622 Maximum allowed interval days. When updating this value please update the _maxCalIntervalDays variable in SensitivityControl.xaml.cs
	SET @MaxCalIntervalDays = 365 * 10

	SELECT @SensorType = [TypeId] FROM [dbo].[SensorsType] WHERE [SensorType]='Analog'
	
	SELECT @SensorId = A.[Id] from [dbo].[Sensors] AS A INNER JOIN [dbo].SensorsType AS B ON A.SensorType=B.TypeId WHERE B.SensorType='Analog' AND A.SerialNumber=@SerialNumber

	-- FB14622 Validate the range of calibration intervals
	IF(@CalInterval > @MaxCalIntervalDays OR @CalInterval <= 0 )
	BEGIN
		RAISERROR ('Invalid calibration inteval',16,1)
	END

	IF( @SensorId IS NULL)
	BEGIN
		INSERT INTO [dbo].[Sensors] (SensorType, SerialNumber) VALUES (@SensorType, @SerialNumber)
		SELECT @SensorId = SCOPE_IDENTITY()
		SET @new_id = @SensorId
		exec dbo.sp_SensorsAnalogInsert_98
			@SensorId,
			@UserSerialNumber,
			@Model,
			@SensorModelId,
			@Manufacturer,
			@Status,
			@MeasurementUnit,
			@OffsetToleranceLow,
			@OffsetToleranceHigh,
			@eId,
			@Capacity,
			@Comment,
			@BridgeType,
			@BridgeLegMode,
			@Shunt,
			@Invert,
			@UserValue1,
			@UserValue2,
			@UserValue3,
			@FilterClass,
			@BridgeResistance,
			@IsoCode,
			@IsoChannelName,
			@UserCode,
			@UserChannelName,
			@CheckOffset,
			@SupportedExcitation,
			@InitialEU,
			@CalInterval,
			@CalibrationSignal,
			@InternalShuntResistance,
			@ExternalShuntResistance,
			@UniPolar,
			@RangeLow,
			@RangeAve,
			@RangeHigh,
			@Created,
			@TimesUsed,
			@SensorCategory,
			@BypassFilter,
			@CouplingMode,
			@Version,
			@LastModified,
			@ModifiedBy,
			@LocalOnly,
			@AxisNumber,
			@NumberOfAxes,
			@UserTags,
			@DoNotUse,
			@Broken,
			@DiagnosticsMode,
			@SerialNumber,
			@FirstUseDate,
			@LatestCalibrationId,
			@ACCouplingModeEnabled,
			@SensitivityTolerancePercent,
			@AssemblyName,
			@UsageCount,
			@MaximumUsage,
			@errorNumber,
			@errorMessage
	END	
	ELSE
	BEGIN
		SET @new_id = @SensorId
		exec dbo.sp_SensorsAnalogUpdate_98  
			@SensorId,
			@UserSerialNumber,
			@Model,
			@SensorModelId,
			@Manufacturer,
			@Status,
			@MeasurementUnit,
			@OffsetToleranceLow,
			@OffsetToleranceHigh,
			@eId,
			@Capacity,
			@Comment,
			@BridgeType,
			@BridgeLegMode,
			@Shunt,
			@Invert,
			@UserValue1,
			@UserValue2,
			@UserValue3,
			@FilterClass,
			@BridgeResistance,
			@IsoCode,
			@IsoChannelName,
			@UserCode,
			@UserChannelName,
			@CheckOffset,
			@SupportedExcitation,
			@InitialEU,
			@CalInterval,
			@CalibrationSignal,
			@InternalShuntResistance,
			@ExternalShuntResistance,
			@UniPolar,
			@RangeLow,
			@RangeAve,
			@RangeHigh,
			@Created,
			@TimesUsed,
			@SensorCategory,
			@BypassFilter,
			@CouplingMode,
			@Version,
			@LastModified,
			@ModifiedBy,
			@LocalOnly,
			@AxisNumber,
			@NumberOfAxes,
			@UserTags,
			@DoNotUse,
			@Broken,
			@DiagnosticsMode,
			@FirstUseDate,
			@LatestCalibrationId,
			@ACCouplingModeEnabled,
	        @SensitivityTolerancePercent,
			@AssemblyName,
			@UsageCount,
			@MaximumUsage,
			@errorNumber,
			@errorMessage
	END	
END TRY
BEGIN CATCH
	SET @errorNumber = error_number()
	SET @errorMessage = error_message()
END CATCH
END