text/microsoft-resx 2.0 System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 DataPRO Data Recorders Sensor Database Sensor Templates Administrative Perform Sensor Checks Groups Customer Details Data Recorders Diagnostics Download Data Export Data Hardware Lab Details Logout Manage Users Prepare Check Channels Record Review Run Test Sensor Database Sensor Templates System Settings Group Templates Test Setups View Data Login Password Remember password User name Search Cal date Capacity Name Excitation Last modified Manufacturer Model Modified by Sensitivity Serial number Units Select Test page Add Delete Edit Add Delete Edit Add Delete Edit Email Contact Phone Lab name Modified Modified by Record name Bridge type Sensor max range (EU) Excitation Manufacturer Model Units Model Display name Modified Modified by Role User name Customer Last modified Last modified by Record name Email Engineer Phone Cal date Channels Firmware Type Serial number Add Discover hardware Delete Edit Add Sensor Done Edit: {0} Save and add another Save Add Delete Edit Add Delete Edit Add Delete Edit Add Delete Edit Number of Channels Associated Groups Warning: Are you sure you want to delete {0}? {0} channels, {1} required Description Modified Modified by Name Number of Zones Description Name Template Channels Description Graphs Modified Modified by Name Recording mode Cal interval (days) Manufacturer Model Non-linear Number of axes Offset tolerance High Low Remove offset Serial number Shunt check Shunt method Zero method End (sec) Start (sec) Info Overview ADC Auto range Fixed Value EU mV Add graph Next 1 graph(s) Prev 1 graph(s) Add Calculation Add Calculated Channel Channel Name Description ISO Code Calculation Calculation Input Channel Cancel Save Name Emulation External Internal None Average over time Use absolute zero Use diagnostics zero Filter Pan % full scale Point Zoom Disable filters Enable filters Eng units % full scale % full scale Edit Graph Full bridge Half bridge Half bridge (+Signal) [TDAS G5 Only] IEPE Quarter bridge Manufacturer New Manufacturer Name Model New Model Name Add Sensor Model: Done Edit Sensor Model: Info Overview Save and add another Save All 1 2 3 4 5 6 Capacity Dimension Direction Engineering units Nom. bridge resistance (ω) Nominal excitation Nom. sensitvity (mV/V/EU) Polarity Proportional to excitation Sensor type Setting (new) (new) Create sensor template Add graph Done Edit Graph Save and add another Save Select View Add graph Save and edit another Save as View Browse Calibration date Login failed. invalid password. Add user Edit User: {0} Info Permissions Visibility Done Save and add another user Save Administrator Guest Power user User Admin Deny Edit Read Read and execute Confirm password Display name Last modified Last modified by Local only Password Username User role Add Delete Edit ----------------------------- Arm Diagnostics Download all Export all Hardware Next step Prev step Realtime Select View all Verify ROI Download ROI View ROI Export ROI Add Test Setup: {0} Done DAS Edit Test Setup: {0} Graphs Info Groups Save Add Add new graph Automatic mode Auto progress Auto progress delay (sec) Available channel(s) Available groups Customer details Post-trigger second(s) Pre-trigger second(s) Serial number Samples per second Data acquisition system setup Post-trigger second(s) Number of events Pre-trigger second(s) Samples per second Description Test info Diagnostic options Download all Download and view options Download region of interest (ROI) Prepare Hardware delay second(s) Existing graph(s) Export data Export format Export options Graph channel(s) Description Graph details Graph name Info Lab details ms Test Setup name ROI period start (sec) ROI period end (sec) Copy & Trim New Test Id Test Id already exists Test Id is required Test Id already exists Test Id is required Test Setup already exists Test Setup is required Test Name Test Id Copy & Rename Number of graphs Groups Realtime options Recording mode Recording options Remove Require all units pass diagnostics Require user confirmation on errors ROI period end (sec) ROI period ROI period start (sec) Run diagnostics Search Show realtime Groups in test Use customer details Use lab details Verify data View all View ROI Stop Monitoring Disarm Fullscreen Reset zoom Connect Connection type IP address Network USB Done Save Recorder discovery Done Save and add another Save Circular buffer Recorder Circular buffer multiple-events Recorder multiple-events Continuous Recorder Add {0} channels Done Update Description Local only Modified Modified by Type Name Test object Add group template Done Channels Edit Group Template: {0} Info Save Template Image Channel Comments1 Comments2 Laboratory channel code Name Name of channel Pre filter Reference system Required Transducer type Units Add Group: {0} Edit Group: {0} Calibration date Channels Connection Firmware version IP address Max modules Max sample rate (sps) Min sample rate (sps) Network Protocol version Serial number Memory Type USB Name Modified Name Template Global Range (CAC) Capacity Range High Range Medium Range Low Add Add Delete Delete Description Direction Filter class Fin loc 1 Fin loc 2 Fin loc 3 ISO code Main location Name Physical dimension Picture Position Region description Region name Select zone Test object Channels Included Status Type DAS Channel Channel Name Region Required Sensor Zone Add DAS {0} Edit DAS {0} Done Hardware Info Save Channels Done Run Run test Customer cost unit Customer name Customer order number Customer test ref number Modified Local only Record name Project ref number Local only Add customer details Done Edit Customer Details Save and add another Save Laboratory contact email Laboratory contact fax Laboratory contact name Laboratory contact phone Laboratory name Laboratory test ref. number Record name Add Lab Details Done Edit Lab Details: {0} Save and add another Save View Date Test Setup Name Time View test Download Type (e.g. All or ROI) Test Date/Time Done Done Save Edit mode Done Edit mode Save Done Save Start Monitoring Verify all Done Import Add selected Browse (multiple) Select file(s) DAS type Done Next Prev SLICE IP address(es) TDAS IP address(es) Check DAS DAS list Show DAS Test object list Test Setup list Apply config DAS list Diagnostics Realtime Done Import Browse Select file(s) Edit Test Setup Add Include field headers Export to individual files Select sensors to export Clear selection Done Export Format Next Options Select all Select Import Next Options Preview Select file(s) Export File(s) Export Format Options Export Comma separated value file(s) CSV Equipment exchange file EQX Sensor information file(s) SIF Cal excitation Cal measurement unit Sensitivity Cal user Load settings Save settings Column separator Custom column order < include Remove > Remove all >> Axis number Bridge leg mode Bridge resistance Bridge type Bypass filter Cal date Cal due date Calibration signal Cal interval Capacity Check offset Name Coupling mode Created Physical dimension Direction Excitation voltage External shunt resistance Filter class ID Initial EU Internal shunt resistance Invert ISO code Active Value Default Value Is proportional Last modified Local only Manufacturer Measurement unit Model Modified by Non linear Number of axes Offset tolerance (high) Offset tolerance (low) Online Polarity Polynomial style Range (med) Range (high) Range (low) Remove offset Sensor category Serial number Shunt Status Times used Unipolar User serial number User value1 User value2 User value3 Version Zero method Zero method offset Available Included Browse Filename Folder Encountered problem doing data download for {0} Encountered problem doing query download for {0} Cannot get calibration results on a null device list Cannot get event calibration results on device list with {0} entries Encountered problem getting event calibration results for {0} Cannot query download on device list with {0} entries Cannot query download on a null device list Encountered problem downloading all data DAS: {0} has no samples in its event data. there is nothing to download. Overwrite pre-existing data files? Warning: the following files with test data already exist in {0} {1} Select 'OK' to overwrite the old files with new data.{0}you can preserve the existing test files by pressing 'cancel', changing the 'path' in 'folder', and downloading again. Cancel Status User canelled export Backing up existing file Cancelled Done Successfully exported {0} sensor(s) Writing header fields Delete all sensors, are you sure? Format Delete all Column separator Has header row Cancel OK Delete Name (multiple) SLICE network-attached DAS TDAS network-attached DAS (multiple) Cancel Status Cancelled Done Status Channels DAS Read dallas ID Channel Online Scanning Sensor Sensor ID analog Dallas ID Axis Continue Download Cancel OK Cancel Channels Continue DAS Preparing Hardware Failed One or more sensors failed diagnostics, are you sure you want to continue? Waiting Passed Performing diagnostics Preparing for diagnostics Results Groups Updating DAS configuration Check sensor ID Channel Channel number {0} channels to resolve Conflict with {0} Issue Channel not assigned Hardware not found Checking sensor ID Sensor ID not found Status Allow missing sensors Cancel Continue Done. All sensors identified. Incomplete. {0} channel(s) require manual identification. Not all channels have been found, are you sure you want to continue? Querying configuration ADC Add Close EU Meter mode mV Osc mode Zero Hardware Checking for data Cancel Continue There is data which has not been downloaded. Continue with test, or Cancel? Export Querying configuration Done Delay (ms) Contact Closure Normally Closed Contact Closure Normally Open Five Volt High-to-Low Transition Five Volt Low-to-High Transition Transition Low-to-High Transition High-to-Low Not set Duration (ms) Name Output mode Delay (ms) Duration (ms) Limit duration Name Output mode Digital output Add digital channel Done Edit Digital Channel Save and add another Save Add Delete Edit Add Delete Edit Sensors Squibs Delay (ms) Duration (ms) Fire mode ISO code Description Auto-detect DAS Current(ohms) Delay (ms) Description Duration (ms) Fire mode AC - cap discharge DC - cap discharge DC - constant current ISO code Limit duration Tolerance high (ohms) Tolerance low (ohms) Add squib setting Done Edit Squib Setting Save and add another Save Added Cancelled Connected Connecting Done Failed Ready Invalid IP address Could not connect No reply Pinging Ping OK Querying configuration Querying configuration Ready Updated Auto-discovered DAS Included Ping Serial number Status USB-connected DAS Add Connect Ping {0} analog channels G5 Position {0} reprogrammable channels SLICE PRO SLICE SLICE MICRO SLICE NANO SLICE Base+ SLICE Distributor 4 {0} analog channels, {1} squib channels, {2} digital output channels TDAS PRO Rack Type DAS DB Show DAS Test Setups Run No data is present to download. OK Enter test id Cancel OK Retry Retry Please place all TOMs in Arm Mode. Please place all TOMs in Safe Mode. Another SLICE or TSR application is already running. DataPRO cannot access DAS until the other application is terminated. Press OK to continue or Cancel to close and focus on the other application. Warning Customer details Lab details Test id Contact fax Contact name Contact phone Lab details Lab name Customer cost unit Customer record Customer name Customer order number Customer project ref. number Customer test ref. number Contact email Lab test ref number Description Basic info Name Position Groups Test Object Recording Mode: Samples Per Second: Position Test object Name Description Import sensor models Overwrite existing sensors Format CSV (*.CSV) Equipment exchange (*.e2x) Sensor information file (*.sif) Sliceware (*.xml) Data type Analog data counts Filtered EU Unfiltered EU End time Separate file for each channel Start time Include time column Format DIAdem (*.dat) ISO (*.mme) Somat (*.somat) Test log file (*.tlf) Tsv (*.tsv) Browse File(s) Format CSV (*.CSV) Equipment exchange (*.e2x) Sensor information file (*.sif) Sliceware (*.xml) Cancel Next Comma separated values DIAdem DAT ISO 13499 mme 1.6 Somat export Test log file TTS Tab separated value Export data OK Available < include Included Remove > Remove all >> Load settings Browse Column separator Custom column order Filename Folder Include field headers Export to individual files ISO multimedia data exchange files ISO Save settings Show channel Comments Customer cost unit Customer name Customer order number Customer project ref. number Customer test engineer email Customer test engineer fax Customer test engineer name Customer test engineer phone Customer test ref. number Date of the test (yyyy-mm-dd) Errors occurred Laboratory contact email Laboratory contact fax Laboratory contact name Laboratory contact phone Laboratory name Laboratory test ref. number Name of the channel Medium no./number of media Reference temperature Relative air humidity Class of test object {0} Code of test object {0} Test object {0} Driver position object {0} Impact side test object {0} Mass test object {0} (kg) Name of test object {0} Test object number Ref. number of test object {0} Type of test object {0} Velocity test object {0} Title Type of the test Regulation Subtype of the test Verify all Test ID Armed Arming Re-arming Preparing data memory A fault was detected - stopping the test is recommended Filling buffer Waiting Processing... Please place all TOMs in Arm Mode Preparing for arm Ready for download Recording Waiting for post-test processing to finish Waiting for start Waiting for all TOMs to be placed into Arm Mode Recording, waiting for trigger Automatic mode delay (ms) Cal date Due date Cal interval Name Serial number Group Sensors with calibrations due Sensors Export data CSV (*.CSV) TDM (*.tdm) Comments of test object {0} ADC Filtered Barrier height {0} Barrier width {0} Number of loadcells {0} Offset {0} Origin x {0} Origin y {0} Origin z {0} Reference system {0} Yaw angle {0} Unfiltered Test objects Barrier height {0} Barrier width {0} Class of test object {0} Code of test object {0} Comments of test object {0} Driver position object {0} Impact side test object {0} Mass test object {0} (kg) Name of test object {0} Number of loadcells {0} Offset {0} Origin x {0} Origin y {0} Origin z {0} Reference system {0} Ref. number of test object {0} Type of test object {0} Velocity test object {0} Yaw angle {0} ISO export ISO meta details Lab info Customer info Test object info Comments {0} of {1} Report is already in use. please close excel and try again. Create summary Check Channels Run Test Compatible template(s) Subtemplate(s) Parent Template Parent Browse File Groups Templates Import Done Info Preview Import Idle Reading file Cancel OK Advanced Basic info Bridge resistance Cal date Capacity Channels Comment Details Dimension Direction EID Engineering units Excitation ISO object type Group name / serial number Polarity Proportional Sensitivity Sensor type Name Sensor Download data Change Emulation External Internal None Clear selection Import Select all Description IP address Name Scan Basic info Refresh Auto generate Auto generate test DAS Detect Graphs Info ISO Auto generate Actual range (EU) Channel # Description Desired range (EU) Table view Excitation Module Noise (% fs) Initial Offset Sensor s/n Shunt Group Tree view All Passed Failed Warning: files with export data already exist in{0}{1}{2}{3}{4}Select 'Yes' to overwrite the old files, or 'No' to discontinue the export.{5}{6}Alternatively, you can preserve the existing test files by moving the files in this folder to another location before selecting 'Yes'. No Yes {0} channels No channels assigned 1 channel Circular buffer Recorder Continuous recorder View report Test settings View summary Are you sure you want to delete? SLICE Distributor SLICE Mini Distributor No Yes Battery (V) DAS Faults Faults: clear Input (V) Status Group Trigger: waiting Triggered Programmable channel(s) digital output IEPE squib Connected Connecting Failed Invalid configuration Connection Turn off excitation when test completes Next {0} graph(s) Prev {0} graph(s) Next x Prev x Test length in seconds Event length in seconds {0} is not supported on {1} channel {2}. {0} is not supported on {1} channel {2}. Started Check Trigger step Check trigger Check trigger Arming Configuring device(s) Done Failed to arm Failed start Failed trigger Erasing flash Passed Start: waiting Start: mixed Trigger: mixed CSV DIAdem ISO SoMat TDAS TTS TSV Check Trigger Check trigger Clear model selections Clear sensor selections Select all models Select all sensors Check Trigger Models Broken or Do not Use Sensors Warning: DAS armed and waiting! OK Not all units have started - start remaining units or stop the test. Remaining test time: Triggers do not match - stopping the test is recommended. Remaining test time: Not used in test Check Hardware Status Check Hardware Status DAS unavailable DB unavailable One or more DTS applications are already running. acquisition hardware will be unavailable until applications are closed. OK Primary DB connection lost OK Hardware Run post-test diagnostics on analog channels Post test diagnostics Export folder Browse Failed Filter class Filter class Downloading Download failed Download finished No units found Change Change Change Change Change Apply scale factor mV Cal signal check Factory excitation Final offset Measure bridge mV Measure excitation Measure noise Measure offset Measure shunt Remove offset Shunt check Check offset Mixed (mV/EU) or (mV/V/EU) Nom. sensitivity (mV/EU) Measure bridge(s) Measuring bridge resistance Measure bridge resistance Resistance No Yes No options available for this export format No Sensors Group Channel name Channel filter class ISO code Polarity Range (CAC) Sensor name Serial number Units Errors ISO object type could not be determined Sensor {0} does not appear to have a valid ISO code for object type Sensor {0} appears to belong to a different object type Sensor settings ID Fine location for {0} not in DB ({1}) {0} - has invalid sensitivity of [{1}] in it's calibration history {0} - Iinvalid Bridge Resistance of [{1}] {0} - Invalid Capacity of [{1}] Resistance Type Simple with average over time Set 0 EU during diagnostics Specify mV for 0 EU Polynomial y = (Vout-intercept)/slope (legacy) Display order Move down Move up Done Home OK Please correct the errors in red before continuing Avg window end (ms) Avg window start (ms) Intercept mV for 0 mm * s^1 + * s^2 + * s^3 + Slope Voltage linearization exponent No Yes No Yes Sensor {0} will be skipped as no calibration data was found Sensor {0} will be skipped because of error: {1} Dynamic groups component dummy / dummy impactor fixed barrier linear impactor mobile barrier pendulum sled test rig undefined / other vehicle 1 vehicle 2 vehicle 3 vehicle 4 vehicle 5 vehicle 6 vehicle 7 vehicle 8 vehicle 9 ? Channel type At least 1 channel is required to be selected A name is required Locale Slope (mm/V) Date Default filter class Direction Fine location 1 Fine location 2 Fine location 3 Main location Physical dimension Remarks Name Type Direction Filter class Fin loc 1 Fin loc 2 Fin loc 3 Main location (new fine location 1) (new fine location 2) (new fine location 3) (new main location) (new position) (new test object) (new type) Phys dim Position Test object Type Channel Codes Custom channels Edit Custom Channels Add custom channel Done Edit Custom Channel Save No Yes Add Delete Edit (new direction) (new physical dimension) Remarks Name Download folder Browse Folder Browse Copy & Trim Copy & Rename Position code {0} already belongs to position {1} Position {0} already exists and is not new Position text required Test object code {0} already belongs to main location {1} Test object {0} already exists and is not new Test object text required Type {0} already exists and is not new Type text required Failed to save custom channel - {0} Direction code {0} already belongs to {1} Direction {0} already exists and is not new Direction text required Fine location 1 code {0} already belongs to {1} Fine location 1 {0} already exists and is not new Fine location 1 text required Fine location 2 code {0} already belongs to {1} Fine location 2 {0} already exists and is not new Fine location 2 text required Fine location 3 code {0} already belongs to {1} Fine location 3 {0} already exists and is not new Fine location 3 text required Main location code {0} already belongs to {1} Main location {0} already exists and is not new Main location text required Physical dimension code {0} already belongs to {1} Physical dimension {0} already exists and is not new Physical dimension text required Failed to load database - {0} Some required channels do not have a sensor assigned Since no channels are selected, no hardware is allowed No hardware is selected Sensor ID {0} appears on both {1} and {2} Sensor {2} not found in database for {0} {1} A required channel is missing a sensor {0} {1} Sensor ID {0} on {1} {2} is already assigned on {3} {4} IEPE module Quarter bridge Half bridge Full bridge Acceleration Channel {0} does not support {1} required by sensor {2} Channel {0} does not have any excitation options matching any calibration records for sensor {1} None of the selected hardware supports {0} required by sensor {1} None of the selected hardware supports {0} excitation required by sensor {1} Group {0} channel {1} does not support {2} required by sensor {3} Group {0} channel {1} does not support {2} required by sensor {3} None of the selected hardware for {0} supports {1} required by sensor {2} None of the selected hardware for {0} supports {1} required by sensor {2} Not specified [excitation] 5 volt excitation 2.0 volt excitation 10 volt excitation 2.5 volt excitation 3.0 volt excitation ISO code {0} for {1} {2} already assigned to a channel ({3}) (no channels) Object type not specified for {0} Download cancelled Common status line Bypass check Monitoring Stopped, Ok to Disconnect No Yes Not all steps are complete. Are you sure you want to leave this page? Number of events supported by TSR AIR is {0}. It's automatically changed from {1} to {0} Units have changed, please check hardware before resuming realtime Finish Communication device (same as download folder) No Yes Are you sure you want to skip this export? Realtime stress Realtime stress Customer Laboratory Armed Filtered Unfiltered Invalid date of the test Invalid export folder Invalid mass Invalid reference temperature Invalid relative air humidity Invalid velocity Choose {0} Filtered, Unfiltered, or both Not implemented - please contact support Sensors Found Read IDs Connection DAS Available Data Recorders / Distributors Sensors Available Read IDs, Measure Bridges Channel Status Measure NOT REFFERENCED Resistance Sensor Available DAS channels ID Read ID Some selected DAS are not connected and some connected DAS are not selected Done Ready No DAS connected None of the selected DAS are connected Building channel list Some of the connected DAS was not selected Some of the selected DAS are not connected Connected Axis 1 Axis 2 Axis 3 Axis 4 Axis 5 Axis 6 Axis 1 Axis 2 Axis 3 Axis 4 Axis 5 Axis 6 Resistance (Ω) Calibration Sensor max range Range High Range Medium Range Low DisplayUnits Check Dimension Global Initial EU Units High Low Polarity Property Display Info Physical Sensor type Shunt Supported excitation Missing calibration records for {0} (sensor serial {1}) Group {0} does not support excitation required by {1}({2}) No channels support excitation required by {0} ({1}) No calibration data found for {2}({1}) on {0} Hardware channel {0} does not support required excitation voltage of {1} ({2}) IR-Tracc Average over time IR-Tracc Diagnostic zeroed IR-Tracc Legacy IR-Tracc mV for 0 mm Cubic polynomial No calibration records found for {1}({2}) on {0} No supported excitations found for {1}({2}) on {0} At capacity Avg over time Last Calibration Date Document(s) Linearization exponent method mV at 0 mm Absolute zero Non-Linear Non-Linear Format Or Proportional to Excitation Remove offset Sensitivity Software zero Diagnostic level View End (sec) Start (sec) Supported excitation(s) Name Serial number No Yes Download cancelled Download failed Download finished Getting event data Preparing for download Querying configuration Cal date Calibration history Calibration note Note Details Modify date Record Measuring bridge resistance of [{0}] {1} No hardware is selected Apply Changes to Sensor Database Writing flash Read IDs Measure Bridge Resistance(s) Writing flash memory Updating DAS configuration Cancel OK Default hardware filter rate for {0} is out of range. Press OK to continue and use the max hardware rate(s) or Cancel to cancel Finishing download Query modules Test channel read Test channel run Invalid laboratory test reference number - a value is required Invalid customer name - a value is required Invalid laboratory contact name - a value is required Invalid laboratory name - a value is required Invalid customer test reference number - a value is required Upload data Upload folder Upload options Upload data Browse Done Uploading Max draw delay Min draw delay Polling interval Restart realtime Sample rate Start signal Trigger signal Are you sure you want to skip the upload step? Press OK to skip or cancel to cancel upload step. Cancelled Failed Files in the following directory will be overwritten if you continue. Use OK to continue or cancel to abort.{1}{0} Details Document File info Invalid format: {0} Name Browse Options Order number Details Output file Owner Recipient Sender Export group Done Export Export Export Import Are you sure you want to delete the custom channel(s)? (May take a few minutes to delete). Nonlinear format {0} is not supported on sensor {1}, bypassing Output file required Overwrite existing file? Press OK to overwrite or cancel to stop. Serial number required Browse Name Description Channels Last Modified By Last Modified Associated Test Setups Customer Description Export file Included Name Done Export Export Import Export test setup(s) Export group(s) Import group(s) Export Sensitivity of 0 is invalid Retry current step Change OK Make current A valid Test Setup is required to proceed. Please select a valid Test Setup or create a new Test Setup using the Test Setup tab. At least one sensor in the Test Setup is marked as InspectBeforeUse. Change test setup Checking for undownloaded data DAS Channel Hardware Sensor SN Assigned System settings Cancel System settings Tables System settings Done Save Save Name Header Display order Visible Width Are you sure you want to skip the remaining graphs? Press OK to continue or cancel to remain on this step Restore settings Working Done Failed Waiting for user input Object Measurement units required Connecting Failed Getting configuration Abcdefg Cancel OK Cal date Capacity Excitation ID Last modified Manufacturer Model Modified by Name Resistance Serial number (name) Units Channel Data Recorders ID Measure Bridge Resistance Serial number (name) Sensor data Select 'OK' to change the sensor assignment(s) or 'Cancel' to abort. Warning: the following sensors are already assigned. Resistance setting will change more than 5% (from {0} to {1}) for {2}.{3}{4}use 'OK' to continue or 'Cancel' to skip. List of sensors extends beyond end of list of channels Cancel OK OK (no options for this export format) Test Setup: ISO export details ISO export details Checking DAS Checking Data Recorders Connecting to hardware Connecting to hardware {0:00}:{1:00} Waiting No channels in test No data to download Passed Test cancelled Import another Import Sensors 10 V 2 V 5 V Encountered problem downloading ROI data {0} channels required, {1} physical channels included. There are more required sensors than available channels {0} assigned channel(s) out of {1} required channel(s). With {2} of {3} available physical channel(s) assigned. Channels required error in channel: {0} error loading one or more channels in graph: {0} DataPRO has experienced an issue. The issue has been recorded. DataPRO will now shutdown for safety. Sensor ID Distributor Distributor Distributor Distributor Channel List Sensors Available No hardware assigned. Please assign hardware. Exit without saving? Distributor There are {0} duplicate isocodes. Please check positions of groups. Idle Home No Yes Are you sure you want to cancel this test (you may leave this page without cancelling by clicking the 'Back' button)? Are you sure you want to close DataPRO? Press Yes to close or No to continue. No Yes OK OK OK No Yes Double click to launch the Feedback view Are you sure you want to close Feedback window? Warning Error Command Request Command Response Information Copied to clipboard Saved in {0} Save Copy to clipboard Feedback The file {0} will be overwritten. Do you wish to continue? OK to continue or Cancel to cancel. Group name Included Overwrite Display name Full scale Invert ISOCode Issue Sensor serial number Channels that will be imported Groups File Channels that will not be imported Warnings Tags Sensor not found Invalid Invert Invalid full scale capacity Invalid number of fields at line {0} Empty file Done Failed Waiting Working Reading Importing Import Import Test Setups Import No Yes Are you sure you want to disarm? Cancel OK User defined channels Groups Group templates DAS Sensors Sensor templates Test Setups {0} (Low) Import File Error, please check connection to units. [{0}] Browse Destination file: Post trigger (seconds): Pre trigger (seconds): Warning, the channel {0} has an expired field - {1}. the transducer main location {0} is expired - {1}. the transducer main location {0} is expired - {1}. No battery Battery (V) Valid for excitation Pre-Trigger Seconds: Test Length In Seconds: Post-Trigger Seconds: DIAdem export info ISO export info TTS export info Database is from a more recent version and the application needs to be updated to use the database. Database Version {0}, Application Database Version {1} Database needs to be migrated before application can start. Please upgrade the database: Required {0}, Found {1}. RDF Custom channel name already exists for another channel, please use a unique name ISOCode field Direction Requires 1 Character ISOCode field Fine Location 1 requires 2 characters ISOCode field Fine Location 2 requires 2 characters ISOCode field Fine Location 3 requires 2 characters ISOCode field Transducer Main Location requires 4 characters ISOCode field Physical Dimension requires 2 characters ISOCode field Position requires 1 character ISOCode field Test Object requires 1 character Name required EU EU @ mV mV None Initial Offset Default value Active value Contact Closure Normally Closed Contact Closure Normally Open Display Mode Name On and Off currently have the same value A name is required Transition High-to-Low Transition Low-to-High Done Save and add another Save Digital input channels Add Digital Input Setting Edit Digital Input Setting Add Delete Edit Digital input Contact Closure Normally Closed Contact Closure Normally Open Transition High to Low Transition Low to High Digital input Squib Digital output Do not use Inspect before use Broken Channel type Analog Digital input Squib Alternating current Capacitor discharge Constant current Delay (ms) Define delay in test Duration (ms) Firing mode Limit duration Name High tolerance (Ω) Low tolerance (Ω) Cal date Sensor max range (EU) Name Digital input Excitation (V) Sensor Id Included Last modified Manufacturer Model Modified by Resistance (Ω) Sensor Serial number Squib Units (Digital Setting) Current Measurement type Voltage Filtered Unfiltered Sensor groups Test Setups Done recording OK Waiting for user selection Default zone Waiting for units to finish writing Multiple (click for defaults) Remove group Group Position Current (A) Threshold (A) Delay (ms) Duration (ms) Output Peak (A) Output Peak (V) Voltage (V) --- Either select at least 1 channel or remove the {0} Dynamic Group. Amps Amps Volts Contact Closure Normally Closed Contact Closure Normally Open Five Volt High-to-Low Transition Five Volt Low-to-High Transition Digital output Digital output Expected delay (ms) Expected duration (ms) Delay (ms) Duration (ms) Limit duration No Yes Copy ISOCode Modify channel Contact Closure Normally Closed Contact Closure Normally Open Transition High-to-Low Transition Low-to-High Channel {0} does not support digital input mode {1} required by setting {2} Channel {0} does not support squib fire mode {1} required by setting {2} Digital input mode {0} is not supported by hardware channel {1} Squib fire mode {0} not supported by {1} Alternating current discharge Capacitor discharge Constant current discharge None Created by GM ISF Import The following unit has an unexpected firmware version: {0} has {1}, but {2} was expected Update the firmware version(s) in the database? The following units have unexpected firmware versions: Realtime settings Delay between polls period between retrieving data from DAS (ms). Too high of a setting may result in data drop out, too low of a setting may result in putting a stress on available resources. High draw delay Maximum time (ms) between UI updates when data is available. Low draw delay Minimum time (ms) between UI updates when data is available. Too low of a setting may cause UI to become unresponsive. Too high of a delay may result in jerky realtime performance. Sample rate Samples per second for realtime data acquisition. Too high of a setting may cause data drop out, and too low of a setting may cause aliasing. Ready for download - Note: A fault was detected Ready for download - Note: No triggers were detected Ready for download - Note: Triggers do not match Cal Date Excitation JCODE Sensitivity Sensor Id Capacity The requested channel {0} was not found in the test request The file {0} contains row(s) with the wrong number of entries (s) Modify channel Save to PDF Level-Trigger Setting: Level-Trigger Setting: Warning! The use of Level-trigger is not recommended for destructive testing. Apply Apply to DAS Apply Apply Apply to Test Close Description Shift T0 (ms) Filter Data Flag Bridge Digital In Digital Out Squib Type Test ID: Test Setup: Calibration due or overdue Message Missing calibration for {0} Invalid calibration date Channel Sub sample interval (samples) Checking for data Preparing Hardware Failed Waiting for user selection Passed Performing diagnostics Preparing for diagnostics Updating DAS configuration Clearing database Clear database before TSF import Show Checkout button Show CableMultiplier column Clearing database Creating channels Creating groups Creating group templates Creating sensor models Creating test setup(s) Cancel trigger check {0} Analog sensor(s), {1} Digital inputs, {2} Digital outputs, {3} Squib channels Slope={0:0.0000}, Intercept={1:0.00}, Exp={2:0.0000} Sensitivity Returning to the home screen will turn off excitations to reduce heating and power consumption. This will invalidate any diagnostics results for this test. Are you sure you want to return to the home screen? No Yes above or below above below The file {0} is already open in another program such as Excel. Close the file and perform the import again. Cancel Input (V) N/A {0} Low All Analog Digital In Digital Out Squib AutoDetect Armed (AutoDetect will not run while armed) {0} is missing a calibration entry for excitation {1} Warning,{0}{1}{0}Press OK to continue, or Cancel to stay on the page Warning:{0}Press OK to continue, or Cancel to stay on the page Marking sensor 'Broken' or 'Do Not Use' will remove sensor from following: Importing 'Broken' or 'Do Not Use' sensor(s) will remove sensor from following: Type: Header Items: CSV export info Use Retry after re-connecting, Proceed to continue monitoring, or Cancel to stop monitoring The following hardware is not connected: NOT CONNECTED! Partial download cancelled Use Retry after re-connecting, Proceed to download partial data, or Cancel The following hardware is not connected: Partial download cancelled Partial download finished Cancel Proceed Retry Waiting for DAS to re-connect Arm checklist Check battery voltage Check start/event line(s) Check input voltage Perform arm checklist Check sensor ids Measure squib resistances Export failed - {0} Cancelled Details Event lines check N/A Waiting for user selection Sensor Id check Squib resistance check Passed DAS voltage check Waiting for previous operations to complete DAS Start Status Trigger Battery (V) DAS Input (V) Status Arm checklist Channel DAS Group Ch. # Sensor name Sensor Id Sensor serial Status Channel Ch # DAS Group High (Ω) Low (Ω) Resistance (Ω) Setting Status The following units have unexpected maximum memories: The following unit has an unexpected maximum memory: {0} has {1}, but {2} was expected Update the maximum memory(s) in the database? Battery high Battery low Failed Input high Input low Preparing checklist Failed, sensor id not on channel Cancelled Post test processing Details Details Details Calculating export size Export cancelled Export failed Export finished Copy & Trim finished Copy & Trim failed Exporting Modify fields, if needed, then click on 'Copy & Trim' button Rename finished Rename failed Renaming Modify fields, then click on 'Rename' button Export format not implemented Exporting Exporting {0}% Modify fields, if needed, then click on 'Run' button N/A Validating Details Details Please place all TOMs in Arm Mode. Press cancel to bypass check. Please place all TOMs in Safe Mode and press Retry, or press Proceed to continue in Arm Mode. Running checks Connected Failed Failed Passed Failed Passed TDAS Control Sensor Database Invalid bridge resistance ({0}) Invalid sensor category ({0}) Invalid desired sensor range (CAC) ({0}) Invalid excitation ({0}) Invalid format {0} - {1} Invalid filter class ({0}) Invalid fullscale ({0}) Invalid IRTRACCExponent ({0}) Invalid LastCal ({0}) Invalid OffsetToleranceHigh ({0}) Invalid OffsetToleranceLow ({0}) Invalid sensitivity ({0}) Invalid sensitivity ({0} - {1}) Software trigger Analog Digital in Digital out Hardware channel can not support sensor type Squib TDC polynomial not supported {0} Axis {1} Invalid Software Zero Equivalent EU ({0}) Apply EU Multiplier JCODE {0} for {1} {2} already assigned to a channel ({3}) No channels in graph Require all units pass arm checklist One or more problems discovered during checklist, are you sure you want to continue the test? Press OK to continue the test or cancel to remain on checklist. Filtered UnFiltered Filtered UnFiltered Sensor {0} not found in database for channel {1} Collapse Osc Channel Info Show Osc Channel Info Export CSV Import CSV Export format File Export only TDC compatible sensors TDAS Control Sensor Database Waiting for user selection Browse No sensors are currently in the export. Please select sensors to include in export. Failed File currently in use, please close any applications using the file {0}. Rack size Firmware Folder SLICEWare XML Cancel Continue Not all DAS is included, are you sure you want to continue? Connected DAS Passed (disconnected DAS will not be included in test) Not included Cancel Continue Bridge IEPE None Pause (Automatic mode) Pause (Automatic mode) Resume (Automatic mode) SLICE PRO DIM serial numbers should start with SPD IP address required SLICE MICRO serial numbers should start with 'BA0' Serial number belongs to a SLICE MICRO Serial number belongs to SLICE NANO Serial number belongs to a SLICE PRO SIM Serial number required SLICE PRO SIM serial numbers should start with 'SPS' SLICE NANO serial numbers should start with 'BA5' Serial number belongs to a SLICE PRO DIM ACC ARS Based on output at sensor max range Sensitivity change tolerance (%) The following DAS is not included, are you sure you want to continue? SLICE PRO DIM SLICE PRO SIM SLICE Base+ serial numbers should start with 'BA5' Module SN Sensor Offset Replace sensor(s) All Analog Digital in Digital out Search Select sensor to replace {0} with Select sensor to replace with Select sensor to replace Squib Paused by system Paused by user Running Waiting Move sensor id from {0} to {1} Move sensor id CalDate Capacity Comparison Maker Model New Original Units Channel Name Group Name ISOCode Polarity Range (CAC) Software Filter Test setup User Code Replace Replace sensor Done Waiting for user selection Working Failed - {0} Groups containing sensor Test Setups containing sensor {0} - Replace Sensor Select a sensor to replace with Select a sensor to replace SLICE PRO DIM SLICE PRO SIM SLICE PRO TOM SLICE PRO TOM serial numbers should start with 'SPT' Sensor details Select sensor first Replace sensor Edit Sensor: {0} Done Save Done {0} - Edit Sensor No channels to export SLICE PRO TOM WARNING! Squib resistances still present, squibs are ARMED AND CAN FIRE. (modified) (saved) Apply EU Offset Are you sure you want to apply a software trigger? Group name required Template required New graph Exit without saving? Name cannot be ISO, CSV, or Realtime Name contains invalid characters for paths or filenames Test Setup name is required Chart Width (s) {0} channels, {1} required Circular buffer DAS {0} can only record for approximately {1} seconds. Multiple recording periods Multiple (see below) No export formats selected Recorder {0:0.00}s Pre-trigger, {1:0.00}s Post-trigger {0:N0} samples per second Invalid upload folder Page {0}/{1} Ready There are no DAS included in the test There are no sensors included in the test Complete Select group first Edit Group: {0} Done Save {0} - Edit Group Culture of import file Zero Average Start must be less than Zero Average Stop Group name already exists, please use a unique name Channel Type Channel Type Channels Hardware Sensors Squib channel values cannot be assigned to non-squib sensors (and vice versa). Incompatible sensors / channels: OK Are you sure you want to remove this cal entry? Are you sure you want to remove this cal record? Add Add new at IPAddress Phase 3: Connect DAS Results: Currently connected DAS Off On Phase 1: Define IPAddress List Hardware discovery Phase 2: Ping DAS SLICE TDAS All SLICE TDAS Discover hardware IP address Name Connect to get serial number Ping failed Good --- Status Type {0} channel(s) Passed Failed (could not connect) Failed (unit armed) Last action Last reply Last Attempt Latency (ms) Channels Remove Type Connect Scan selected Add/update Hardware Discover hardware Display units required Sensitivity Units Sensitivity Details Browse TDC INI File Capacity (EU) Multiple events recording mode currently unsupported Unsupported recording mode: {0} Could not generate an ISOCode for entry {0} Missing hardware: {0} Sensor not supported on Digital Output channel {0}: No unit conversion available for {1} to {2}. Please add unit conversion or select a new Display Unit for {0}. No alternate unit or conversion unit available for {0} to {1}. {0}: No unit conversion available for {1} to {2}. Please add unit conversion or select a new Display Unit for {0}. ADC Channel {0} has no sensor assigned Could not get unit conversions for sensor {0} on channel {1} + {0} more error(s) No hardware is assigned Sensor {0} for channel {1} does not have any valid calibrations Sensor {0} for channel {1} was not found in database + {0} more error(s) Quick data collection Quick build Create Custom Channel Channel: Data Channel Details Channel Type: Step 1: Available Hardware Step 2: Discovered DAS and Sensors Step 3: ISO Channels Sensor Details Test Object Test Setup Test Setup not found {0} Sensor/Id Ch # Type DAS Module Cal Due Date Capacity Name Display Units Manufacturer Model Serial Number Channel Details Create New Sensor DAS Step 4: Sensor Settings Save sensor Sensors Use An Existing Channel Cancel Save Cancel TDMS Digital input mode ({0}) not supported on channel for sensor {1} Digital output mode ({0}) not supported on channel for sensor {1} No supported excitations on channel for sensor ({0}) Bridge type ({0}) not supported on channel [{1}] Sensor id conflict [{2}], sensor id {0} belongs to sensor {1} Sensor id ({0}) for sensor {1} conflict with id on channel ({2}) Sensor id ({0}) for sensor {1} is not on channel Squib fire mode ({0}) not supported on channel for sensor {1} Ch # DAS Description ISOCode Module Sensor ISOCode Name Position Test Object Search Cancel Operation cancelled Capacity DAS Description Filter Class ISOCode Module Channel {0} was not found on object {1} Ch # Position Range (CAC) Test Object Duplicate ISOCode {0} There are multiple types of channels on the same test object Step 5: Test Settings Polarity Test saved Save and run Save Invalid sample rate Channel code settings ISO Level New Manufacturer Name required Model required Advanced Includes basic test setup creation and adds sensor creation and custom channel creation features Basic Basic test setup creation (no sensor or custom channel creation) Unassigned Connect Included and Discovered Sensors Ping This will restart the test setup process. Are you sure you want to do this? Save and add another Sensors Available Unassign User specified channel codes ISO 13499 No ISO Waiting for ARM/SAFE mode status from TOM(s) Timed out waiting for response from DAS G5 (in-dummy) G5 (iPort) G5 (VDS) Squib resistance fault Advanced Mode Basic Mode Sensor Test ID (Fill in if continuing on to data collection) Test Id can't contain 'csv', 'iso', or 'realtime' Non-empty Test ID required Could not create system Non-ISO Group Bridge type {0} not supported on channel for sensor {1} Unassigned Dynamic group Not tested (put safe switch into ARM mode) Contact Closure Normally Closed Contact Closure Normally Open 5 Volt High to Low Transition 5 Volt Low to High Transition TDAS Manager CSV Export Every channel with a sensor assigned requries a description Remove Event number too large Event uncompleted Invalid arm mode Invalid event length Invalid pre-trigger samples requested Invalid slice count Memory full Safe switch unplugged Shorted start and trigger Shorted start record input Shorted trigger input Unimplemented arm mode Sensor ID Picture All None OK Current test sample rate has been limited by newly added hardware. Actual Delay Actual Duration Desired Delay (ms) Desired Duration (ms) Battery low voltage Current test setup isn't ready to be run on this tab. Please select a different test setup. A valid calibration was not found for {0}. DI- DO- CH- SQ- <unknown> Test Setup Id contains invalid characters --- (multiple sensors) No Id found Not in sensor db Not yet measured The following test setup(s) contain multiple copies of the sensor being replaced. The new sensor has an id and can't be placed into those test setup(s). ({0}) Sensor ({1}) was found, but on hardware not included in group ({0}) Channel(s) Bridge/IEPE switchable Sample rate invalid for included das Add Name Step 3: Physical and Data Channels The following unit(s) have been discovered but have been detected as of a different type or in a different docking station/rack Abort Report {0} is already in use. Please close Excel and press OK. Press OK for file{0}{1}{2}to be overwritten; Cancel to skip. Initial Offset EU mV None (Calculated) data was not generated by DataPRO <No name provided> (Digital Input Setting) (Digital Output Setting) (Squib Setting) Are you sure you want to replace {0} with {1}? Warning, new sensor already appears in the following test setup(s) {0}. Press OK to continue or cancel to return. Network settings Test settings UI settings Automatic progress delay (ms) Automatic test progression Check trigger quick mode example: {0} Non-Linear display format Sensitivity display format N/A No hardware supports bridge {1} required by sensor {0} No hardware supports any of the excitations required by sensor {0} Dimension Diagnostics timeout SLICE (sec) Diagnostics timeout TDAS (sec) Query config timeout SLICE (sec) Query download timeout SLICE (sec) Query config timeout TDAS (sec) Query download timeout TDAS (sec) Support Transitional Mode Support Non-ISO Mode Channel {0} appears more than once Channel has a description, but no sensor ({0}) IR-Tracc Radius Cal with Cal Factor Calibration Factor [mm/V] Zero-Position Intercept [mm] Sensor ID Done Default Filter Drag one or more sensors here to create new channels at the bottom of the table. ALT+Drag one or more sensors onto existing channel to insert above. ALT+Up / ALT+Down to move selected channels up/down and change order. Remove only Non-ISO groups valid in Non-ISO mode Invalid group name Non-ISO groups only valid in Non-ISO mode Sensor SN (Sensor Name) Units Type Group not supported by current ISOSupport Level ISO Support Can only edit test setups with the same ISO Support level currently configured ISO Support Can only edit groups with the same ISO Support level as the currently configured level Automatically add arm checklist when adding TOMs DO delay ms DO duration ms --- None SQ delay ms SQ duration ms SQ mode DO Delay ms DO Duration ms None SQ Delay ms SQ Duration ms SQ Mode DO Delay ms DO Duration ms --- None SQ Delay ms SQ Duration ms SQ Mode NONE DO Delay (ms) DO Duration (ms) SQ Delay (ms) SQ Duration (ms) SQ Mode NONE --- Non-ISO group templates can't be edited Some hardware channels are not compatible with new sensor (Excitation) Some hardware channels are not compatible with new sensor (Squib Fire Mode) Some hardare channels are not compatible with new sensor (BridgeType) Trigger before Start Sensor SN (Name) Not enough analog channels to support all analog sensors in group Not enough digital input channels to support all digital input settings in group Not enough digital output channels to support all digital output settings in group Not enough SQUIB channels to support all squib settings in group Removing this Dynamic Group will cause one or more channels to no longer be displayed in the following graph(s): {0} Would you like to continue? Removing this Group will cause one or more channels to no longer be displayed in the following graph(s): {0} Would you like to continue? Valid sample rates SLICE AAF rates TDAS AAF rates Units have been connected to but not added/updated. Are you sure you want to exit? SLICE Ethernet Control Module SLICE Mini Distributor Ethernet Controller Ethernet Controller Ethernet Controller SLICE Mini Distributor Ethernet Controller SLICE Mini Distributor Ethernet Controller Channel Sensor Status DAS Channel CH # Sensor All Hardware Channels In Use Manually Resolved Channels Open Unresolved Channels Channel DAS Sensor Module Sensors can only be assigned to open channels Manually unassigned channel Data is too large to be exported in ISO format. is too large to be displayed by the data viewer. G5 Import sample rates and AAF settings from TDAS.ini MAX AAF Browse TDAS PRO Communication timeouts Level Triggers Level Trigger max percentage Level Trigger min percentage Features Sample rates and AAF rates Max AAF G5 Max AAF TDAS PRO Do you want to save your changes? No sensors are in the current group S̲ave see: https://en.wikipedia.org/wiki/Combining_character#Unicode_ranges S̲ - HTML Entity (Decimal) &#818; Save and exit Configuration 600K SPS (18 CH) 700K SPS (15 CH) 800K SPS (12 CH) Channels Configuration Status Type 1M SPS (9 CH) SerialNumber Skipped Don't Save Save Save and exit Max sample rate Configuration is locked, use detect DAS to change configuration. Manually Assigned Group template no longer exists, group is not valid Test setup contains invalid dynamic groups. Test setup contains invalid sensor group ({0}) {0} is defined as '{1}' but is actually '{2}' Read IDs and Measure Bridges Replace Sensor Read IDs, Measure Bridges Replace Sensor No channels on DAS, DAS will not be processed (Assigned by ID) (Assigned by ID) Add: {0} Edit: {0} Edit IDs and Bridge Resistances The SQL server at {0} is not currently available. Please check connection and restart.{1}{2}{3} QA No data recorders included in the test are available. The following unit(s) have not been added into DataPRO yet. Please use the data recorders tab to detect and add the hardware to the system. Failed or missing battery Failed {0} (High) Fail (Battery) Fail (Battery) Fail (Battery) Failed (Input High) Failed (Input Invalid) Fail (Input Low) {0} (High) Warn on missing or failed battery Warn on missing or failed battery (default) Drag and drop sensors or hardware channels to ISO channels to assign them. Use ALT+Up/ALT+Down to rearrange the order of channels. Done updating Test Setups Updating Test Setups SLICE MICRO Base+ serial numbers should start with 'BA0' SLICE NANO Base+ serial numbers should start with 'BA5' SLICE MICRO Base+ SLICE NANO Base+ SQ Limit Duration SQ Limit Duration Squib fire delay can not be less than 0.25ms Insufficient post trigger time to cover squib delay and duration Squib fire duration can not exceed 25.5ms Squib fire duration can not be less than .20ms Squib fire delay can not be greater than 99000 ms Group name not allowed (reserved for Dynamic Groups). Automatic mode delay (sec) Automatic mode delay (sec) Connect timeout SLICE (sec) Connect timeout TDAS (sec) Failed: Timed out reading configuration from devices. Consider increasing QueryConfig timeout Failed: Invalid duration for digital output channel. Consider updating digital output channel value in Test Setup and re-run the test. Please place all TOMs in Arm Mode and press Retry Please place all TOMs in Safe Mode. Getting event info digital input Included Channels Hardware Drag and drop sensors or hardware channels to ISO channels to assign them Group Name cannot contain double-byte characters sensor type {0} not supported on channel {1} in group {2} Couldn't find sensor {0} for channel {1} for group {2} Channel {0} in group {1} refers to hardware that is already in use Channel {0} in group {1} refers to hardware that is not available. Hardware assignment will be removed. There are not enough analog channels to support sensors in the test There are not enough digital input channels to support settings in the test There are not enough digital output channels to support settings in the test There are not enough squib channels to support settings in the test Some channels have no sensor assigned. Sensor {0} appears multiple times in the test setup. Measurement failed The following DAS have disconnected from the system, aborting the test is recommended. Please check connections DAS have disconnected from the system, aborting the test is recommended. Please check connections Highlighted cells will use ID for assignment Cancel Continue Post-test diagnostics has been selected, but will not be run because no channels that remain in the test apply. Are you sure you want to continue? Cancel Continue Post-test diagnostics has been selected, but will not be run because no channels in test apply. Are you sure you want to continue? Calibration Interval (Days) DDAS IP addresses Channels Connection Sensor Ids Serial number Status Input Voltage Status Battery Voltage Status Type Include sensors Test includes hardware which is no longer available ({0}) Action Add Remove Update Action ID Location Sensor SN (sensor name) Failed Ping {0}ms Timed out Keep Scan all Query selected Sensor ID is already in use by another sensor Warning: Sensors with conflicting sensor ids (won't be imported)! Warning, there are sensor ids which conflict with sensors already in the sensor db. Test will not be imported. Sensor ID is already in use by another sensor Empty Press scan to discover hardware and sensors Select hardware to view discovered sensors Modified Modified By Add Found Found Keep (no action) Keep, hardware assignment updated Keep Found Keep, updating hardware as a conflicting id was found on assigned channel Don't run test if sensor is out of calibration DAS Sensors Assigned Online Unassigned Clear all channels Bridge IEPE (module) Data recorders with calibrations due Data recorders with calibrations due Data recorders Allow data collection with overdue hardware calibrations Allow data collection with a grace period on hardware calibration due dates HW calibration due grace period (days) Calibration due warning period (days) Do not allow data collection with overdue hardware calibrations G5 cal interval (days) DAS calibration intervals (days) SLICE 1.0 cal interval (days) SLICE Base+ cal interval (days) SLICE PRO cal interval (days) TDAS cal interval (days) ISO-mme TS 13499 db not found ({0}) HW calibration policy Update Db ROI end is after end of data (test requested {0} seconds of post-trigger data) Region of interest must be more than 0 seconds ROI start is before start of data (test requested {0} seconds of pre-trigger data) ROI is larger than data (test requested {0} seconds of data) ROI period end (sec) ROI period start (sec) ROI period is larger than data ROI period start is after period end Time left in arm Event Number Warning: The following DAS do not contain data: Use Proceed to download data from remaining DAS, or Cancel. Cancel Proceed No data to download Refresh Group has been changed by another user. No changes can be saved until group is reloaded. Sensor(s) have been changed by another user. No changes can be saved until sensors are reloaded. Test setup has been changed by another user. No changes can be saved until test setup is reloaded. Common status line Data Recorders: Edit Group: {0} Edit Test Setup: {0} Available DAS Included DAS Cal date Serial Number Firmware Module ROI period cannot be greater than test time Analog: Connected DAS channels Digital Out: Include selected Online Squib: Digital In: found {0} of {1} Include Remove found {0} Unknown sensor - {0} {0} ROI cannot be a length of 0 Show modules Error generating Fine Location 3 group {0} for sensor {1} (duplicate iso code found) Group Name {0} does not match existing group name {1} for ISO type {2} Filter Class {0} is unsupported Sensor {0} has invalid Fine Location 3 of '??' Clear Delete ALL SLICE TDAS Include Connected Scan/Query Multiple sensor serial numbers found for sensor {0} No Group Name found for sensor {0} Test engineer record Test engineer email Test engineer fax Test engineer phone Record name Test engineer email Test engineer fax Test engineer name Test engineer phone Add test engineer details Done Edit TestEngineer Details Save and add another Save Add Done Delete Edit Edit mode Save Test engineer details Test engineer details Use test engineer details Engineer Details Last modified Last modified by Test Engineer Name Test engineer name Record name TDAS PRO DIM TDAS PRO SIM TDAS PRO TOM Add/Update DAS Current DAS list Tags Tags Proceed Retry WARNING! All TOMs are not in the SAFE position. Click Retry to check again or Proceed to continue. , or press Proceed to bypass squib resistance check. Download failed. The ROI is outside of the available data. Retry No channels found Download failed. The ROI is outside of the available data. Analog Digital input Digital output Input Output Squib A test setup with this name already exists CrashSoft 3 Description Description {0} - invalid excitation of [{1}] Absolute zero Average over time Diagnostic level Dimension Based on output at sensor max range Calibration interval (days) Channel type Default filter Dimension Initial offset Non linear Polarity Proportional to excitation Range high Range low Range medium Remove offset Sensor offset Sensor type Shunt Software zero method Number of Channels Number of DAS Description Number of Channels Test Engineer Customer name required Customer test ref. number required Record name required Laboratory contact name required Laboratory name required Laboratory test ref. number required Record name required Record name required Clear All Browse Export File Include All Export Export Import Data Recorders Browse Data Recorders Import File Include All Clear All Import Cal date overdue Channel count mismatch Device firmware version mismatch DAS available memory mismatch Channel Comment Channel Description DIAdem Channel Name (200) ISO Code None Sensor Serial Number DIAdem User Comment (201) Data export options Test Setups import options DIAdem Channel Name (200) DIAdem User Comment (201) {0} Checkout Test requires at least one Channel Test requires at least one Group Test requires Hardware Auto arming Units can now be disconnected and the ON signal removed. Units will automatically arm{0} when the ON signal is applied. Are you sure you want to start recording? Auto armed - waiting for DAS to restart Set DAS to Auto-Arm OK Start Record This license is for TSR AIR hardware only. All other hardware have been removed. This license is for TSR AIR hardware only. Please remove the following hardware to continue {0} Level triggers Enable level-trigger UI Available channel(s) Device channel Existing trigger channel(s) Maximum range Sensor information Only above Only below Zero method Options Sensors with invalid excitation (won't be imported) Default recording mode Sensor {0} has no valid calibrations. Level triggers There are already {1} level triggers on {0}. This device does not support any more level triggers. Level trigger for '{1}' must be at least {0:0.0}% of capacity ({2:0.00} {3}). Level trigger for '{1}' must not exceed {0}% of capacity ({2} {3}). There is already a level trigger on {0}. This device only supports one level trigger at a time. Trigger inside bounds Above or below Channel name Details Serial number belongs to a SLICE PRO Lab SIM SLICE PRO Lab SIM serial number should start with 'SLS' greater than There are invalid level triggers. These level triggers will not be used. Press OK to continue or cancel to remain at this step. less than between {0} and {1} ({2}) Less than {0} or greater than {1} ({2}) The level trigger for {0} on {1} is no longer valid. Level trigger settings for sensors are only valid on the hardware they were set up on. SLICE Lab Ethernet SLICE PRO Lab SIM Restore original values All channels in this test will be restored to their original values, and any calculated channels will be removed. Click OK to proceed or Cancel to preserve any modifications. Cancel OK The following channels are already level triggered: The following hardware does not support {0}: {1} Lower ({0}) Upper ({0}) Hybrid recorder Allow advanced recording modes Warning: DAS is auto-armed and will be armed when restarted. OK Some hardware does not support auto-arming Not Armed, nor Auto-armed (restart will not arm unit) (Dis)Auto-arm Auto-arm is not allowed. Set the AllowAutoArm setting to True to allow. Level trigger check Serial number belongs to a SLICE PRO Lab ethernet controller SLICE Lab Ethernet serial number should start with 'SLE' Level Trigger Channels Post-Trigger Seconds: Pre-Trigger Seconds: Recording Mode: Samples Per Seconds: Test Length In Seconds: Sample Average Cancel Continue Post-test diagnostics has been selected, but will not be run because G5s do not support it. Are you sure you want to continue? User cannot be deleted Operation denied Refresh Failed (already triggered) Status --- Files in the {0} folder may be overwritten. Cancel Continue There are currently no analog sensors assigned There are currently no digital inputs assigned There are currently no digital outputs assigned There are currently no squibs assigned Sensors Digital inputs Digital outputs Squibs Analog Digital In Digital Out Squib Proceed AutoZero Zero time Realtime logging Trigger seconds display format (none) Existing calculations Input Channels Name Operator Calculated channels Allow calculated channels Search Add Measure final internal offset Measure internal offset Sum Average Sum Cal due date {0} (Battery) Calculated channel name is invalid, must be less than 250 characters Calculated channel names can not be empty Calculated channel {0} contains no input channels Calculated channel {0} contains input channels of different measurement units Realtime channels are only aligned within one DAS Cal due date (multiple) Custom Yes Lateral Longitudinal Vertical Start (Automatic mode) (new filter class) ISOCode is not unique Next Prev Realtime sample rate Realtime sample rate (Slice IP) Realtime sample rate (Slice USB) Realtime sample rate (TDAS G5) Use test channel order Realtime sample rates Enable dynamic real-time optimization Hide settings Hi LOGGING ON Low Med Settings Show settings Create New Modify Max Group Template name must be less than 256 characters (if Added Group, sum of Test Setup name and Added Group name must be less than 246) Add Group New Group Serial number belongs to a SLICE G5 SLICE G5 SLICE G5 serial numbers should start with 'SG5' {0} RunTest Bypass AAF Channel # Sensor Id Sensor Extra Sensor Ids Low power mode (run diagnostics to resume test) Low power Possible Channels Require id found for sensors with ids Test setup requires sensor id to be found AutoArm diagnostics delay (ms) AutoArm diagnostics level Do you want to save modified channels? Checkout Run Test Extra EIDs Sensors Found Sensors Missing Missing sensor(s) and Extra sensor(s) Missing sensor(s) found. Checkout mode (internal squib fire during arm) Suppress quit test warning Suppress missing sensors warning Real-time: suppress view all channels warning Viewer: suppress view all channels warning - Checkout mode - {0} - Checkout mode - Show ISO codes Polls all active sensors and allows selecting sensors by tag in meter mode Use meter mode table style Tags All Export Snapshot Missing modules: {0} Run (Channel) Run (DAS) Run (group) Delay Duration Fire Test Status Export INI file INI file (*.ini)|*.ini|All Files (*.*)|*.* Browse Clear File(s) DataPRO test setup ISF JCL Log archive RDF Status Failed --- Skipped Success Upload location Include Group name in ISO export Warn if test is cancelled without data export RDF (All) RDF (ROI) Control surface port Laboratory project ref. number Laboratory project ref. number (new) (new) Invalid subtype Invalid test type New subtype New type Add to list Derive ROI from All Use circular buffer trigger check Failed (file not found) Files already exist in the following locations. Press OK to overwrite or cancel to abort. {0} User canceled Removing this group will cause it to be deleted, not simply moved to the "Available groups" column. Would you like to continue? Charts Both Hardware Sensors Av Mx Mn Use user codes (instead of ISO) Trigger check after Real-time Battery Voltage Status Input Voltage Status Battery Voltage Status Input Voltage Status Output mode Parameters Parameters Delay Duration Manual Apply Modify Global Range CAC Contact closure - normally closed Contact closure - normally open 5V high to low transition 5V low to high transition Default digital out mode Hardware Setting Defaults OK Warning, system appears to not be in high (or max) performance mode. High performance mode is recommended. The central database could not be reached. DataPro is connected to database in local mode. The central database could not be reached. DataPro is required to connect to the central database in order to import this test setup. Don't remind me again Are you sure you want to clear all Sensor and DAS Channel assignments? No realtime channels available Failed, checklist not run Could not apply configuration to {0} There is no tests available before {0}. Are you sure you want to delete {0} modified tests on or before {1}? Press Yes to confirm or No to cancel. {0} modified tests have been deleted. Summary report has been generated in {1}. The list of {0} tests modified on or before {1} has been generated in {2}. Apply to DAS will shift T=0 on channels ONLY in this DAS, but not all channels in this test. If you have to revert your changes, data will be restored to original files and all other changes will be reverted. Apply to Test will shift T=0 on ALL channels in this test. Are you sure you want to continue? Cancel OK Cancel OK Binary all data Exports Logs Reports Binary ROI data Test setup and {0} more file(s) No Group Type found for sensor {0} Error in group {0}. Group has multiple ISO types. Found {1} and {2}. Please fix this error to continue. Checking for data No data was collected No data was collected - Note: No triggers were detected No data was collected - Note: Triggers do not match Disarm Software Trigger Stop Monitoring Reading voltages Software Start Cancelled by user Cancel Setting configuration failed (Contact closed) (Contact open) (High) (Low) Error, Template {0} referenced an ISO Test Object "{1}" that is not available in import file or database. Add ISO Test Object "{1}" to MME database or DataPRO Custom Channels. Please fix this error to continue. {0} - Valid input mode not found in text "{2}" for SensorType {1}. Should contain "N/O" or "N/C". Disarmed Trigger before start recieved with TDAS racks in the test. Units will be disarmed. Cancelled by user Sensors Total In parallel Sequentially Parallel by DAS type Download mode Logging only available in single chart mode Display name Test Setup to be used for download A valid Test Setup file is required Available replacement DAS Recovery SLICE PRO Lab DIM serial number should start with 'SLD' Serial number belongs to a SLICE PRO LAB DIM Serial number belongs to a SLICE PRO LAB TOM SLICE PRO Lab TOM serial number should start with 'SLT' SLICE PRO Lab TOM SLICE PRO Lab DIM Show recovery controls Hide recovery controls ISOCode '{0}' is present on multiple channels Total Channels: {0} Required Channels: {1} Armed (high) Armed (low) Armed (med) Diagnostics (high) Diagnostics (low) Diagnostics (med) Max valid Min valid Battery Ethernet Control Module (ECM) SLICE Mini Distributor G5 (In-dummy) G5 (VDS) Input SLICE micro Base+ SLICE nano+ SLICE Distributor Settings SLICE Lab DIM SLICE Lab Ethernet SLICE G5 SLICE micro SLICE nano SLICE Lab SIM SLICE Lab TOM SLICE Pro DIM SLICE Pro SIM SLICE Pro TOM TDAS PRO Rack Power settings Good High Low Used --- Working Max parallel TDAS downloads Failed to connect No DAS connected Input channels Cosine Derivative Double integral Integral Sine 3D IR-TRACC (upper thorax) IR-TRACC R. Pot Y R. Pot Z Document {0} failed to load. 3D/2D IR-TRACC Zero Pos Output (V) ZeroPoint Channel Creating calculated channels Broken Wire None Normal Other Saturated Zero Crossing Error Configuration files required in {0} Use Test Setup for Test ID header in CSV export 3D IR-TRACC (upper thorax) IR-TRACC and rotational plots are required to be selected Rotational pots must be different sources Test ID Prefix/Suffix Values [None] [Test Setup Name] [Time Stamp] Default Test ID Prefix Default Test ID Suffix Length of the field {0} [{1} - size {2}] exceed database limitation {3} Changing test type will remove all required channels for this group. Do you want to proceed? TDAS Lab Rack Sensor '{0}' on channel '{1}' has output that exceeds post-trigger time. Sensor '{0}' on channel '{1}' will ignore delay and duration when checking trigger. 3D IR-TRACC (abdomen) 3D IR-TRACC (thorax) 3D IR-TRACC (abdomen) 3D IR-TRACC (abdomen) 3D IR-TRACC (lower thorax) 3D IR-TRACC (lower thorax) 3D IR-TRACC (lower thorax) Included Overwrite Test Setup Name Backup db Restore db Export Import Type: Sub sample interval (samples) TSV export info File already exists, are you sure you want to overwrite? Use OK to overwrite and cancel to return without overwriting Please select an export file location Overwrite Cancel Invalid XML file Please set the import file name to a valid import file. HDF HDF export info Export ADC Export EU Export mV at least one type of HDF export type must be selected DataPRO XML DataPRO (*.xml) Unsupported version: {0}; Current version: {1} Include logs Include reports Include setup Copy SLICE 6 SLICE 6 SLICE 6 serial number should start with 'SL6' Filtered EU Format mV Unfiltered EU Quick Checkout Quick Checkout Channels Quick checkout Done Data Recorders Waiting Manual assignments Query failed Quick Checkout Run check Query selected Test setup name is invalid Quick Checkout Quick Checkout Query selected Run Broken Do not use Sensor with Bypass AAF checked is not supported on channel {0} Sensor with Bypass AAF checked is not supported on channel {0} in group {1} Waiting for trigger check Dimension ({0}) of sensor ({1}) is different than dimension ({2}) of channel ({3}) in group {4} Dimension ({0}) of sensor ({1}) is different than dimension ({2}) of channel ({3}) Don't allow Don't warn Warn ISO channel/sensor compatibility level Warning This Manufacturer/Model pair already exists, please change one or both. Cal-Factor (mm/Vlin) Intercept (mm) Allow data collection with a sensor id out of position Warn when a sensor with ID is out of position Out of position sensors Current channel # Original channel # Sensor Sensor ID Incomplete, {0} channel(s) are out of position Exponent Intercept + CalFactor * (V^Exponent) Manual AutoDiscovery Expected initial state Initial state Contact closure normally closed Contact closure normally open Transition high to low Transition low to high State Closed High Low Open Failed to get Safety switch status Channels highlighted purple indicate the sensor EID found does not match the hardware channel assignment. Channels highlighted green have been assigned via EID or hardware assignment. Channels highlighted yellow indicate the sensor was manually assigned using this Navigation Step. Channels highlighted orange indicate the sensor EID was not found and the hardware channel assignment will be used instead. Excel (xlsx) Excel (xlsx) export info Test setup settings Data set is too large to filter Sensor has been deleted by another user. No changes can be saved until sensors are reloaded. Tilt sensor check Failed, tilt sensor data not found Check tilt sensor(s) DAS X-axis Degrees Status Y-axis Degrees Z-axis Degrees create DataPROInstance -s InstanceAPIPath LocalDB SOFTWARE\\Microsoft\\Microsoft SQL Server Local DB\\Installed Versions SqlLocalDB.exe SqlUserInstance.dll Tools SLICE 6 Distributor SLICE 6 Distributor Temperature check Controls whether the temperature check is enabled for the arm checklist for new test setups Arm checklist temperature check Check temperature DAS Status Sensor Temperature in Degrees C Location {0} : DAS Dependent (Current) (Voltage) Apply Preview Invalid sensitivity Sensitivity Apply Test setup has been changed by another user. Test cannot be run until test setup is reloaded. Use legacy TDAS Control TOM software filter class setting Use legacy TDAS Control software filter adjustment Apply Line Fit will alter ADC data for this channel. If you have to revert your changes, data will be restored to original and all other changes will be reverted. Cancel OK Please provide a display name Test info (localdb)\DataPROInstance AttachDBs.bat SQL Server LocalDb is not installed. Databases were successfully attached to (localdb)\DataPROInstance. DataPRO ISO SQL Server Scripts Arm Prepare Arm Prepare complete. Waiting for user selection. Preparing for arming Allow modification of Test Setup Name and Description Auto discovery Import Options Return without importing groups? Press OK to exit or cancel to remain on page. Channels: digital input digital output SQUIB The following unit(s) are currently unable to read their flash memory: A device attached to the system has event data that no longer matches it's configuration. Please check the log for more details. No memory Trigger shorted: The selected test data is not from a compatible version of DataPRO and cannot be exported. Hardware Scan Read File Summary Level Trigger Analog Channels TOM Channels Squib Channels Scan Hardware Chart width (seconds) DI Channels DO Channels Digital Input Channels Digital Output Channels Edit File Diagnostics mode Diagnostics mode is enabled, please make sure the Diagnostics mode is cleared from any hardware prior to shipping DAS have disconnected from the system, aborting the test is recommended. Please check connections There was a problem accessing DAS, aborting the test is recommended. There are changes not imported yet, press OK to navigate away without importing, or Cancel to return There are unsaved changes, press OK to navigate away from current step, or Cancel to return Done Level-Trigged Data end (sec): Data start (sec): Sample rate (sps): Apply "Shift T₀" modifications to Test only Digital Output Settings Digital Input Settings Last Modified Modified By Squib Settings is marked as required but the sensor assigned could not be found - sensor: is marked as required but without a sensor assigned. Battery Event lines Input power Level trigger Sensor Id Squib failure Temperature Tilt Failed. Failures - AutoZero % Deviation Test setup {0} is being edited by {1} on {2}. Press OK to take control of test setup or cancel to remain on the page without editing. Taking control of the test setup will end the edit by {1}. . Press OK to take control over test setup, or Cancel to remain on page. Module {0} appears to be in a docking station, but does not acknowledge its presence. - Click "OK" - SWITCH OFF Docking Station - REMOVE POWER from Docking Station and wait 10 seconds - APPLY POWER to Docking Station, SWITCH ON and try again Failed to obtain lock Out of date cached items Export all Custom Channels Update Items Out of date cached items Do you want to update the sensors, calibrations, and hardware in this test? Yes will update, No will proceed without updating, and Cancel will remain on this page. Test ID Suffix: Event Number: Failed to update lock Test setup not found Setting page encountered a problem Group not found DataPRO can not run until it has been terminated in session {0}. DataPRO Initiation Error DataPRO Licensing Error License file does not exist. Unregistered License is not valid for {0} machine Current license term is over. DataPRO can still be used and is fully functional for test and measurement, and all DTS hardware is supported. To access full support from DTS, please contact DTS at support.dtsweb.com. This copy of DataPRO is not yet registered. DataPRO is fully functional for test and measurement, and all DTS hardware is supported. To access full support from DTS, please copy the license (.lic) file from the provided installer media to this DataPRO directory, or contact DTS at support.dtsweb.com. Don't warn again Your license is expired. Please contact DTS to renew the license. Central SQL Server is not supported by license type {0} Template is currently in use by one or more groups and can't be deleted. Capacity display format There are multiple ROI with the same suffix. Upload Export file(s) only applicationSettings create DataPROInstance DBType delete DataPROInstance db SQL Server LocalDb is not installed. start DataPROInstance stop DataPROInstance The test setup is no longer locked by the current user and cannot be saved. Tilt failed Sensor type cannot be changed. Not all calculated channels have a unique name. Not all calculated channels have a name set. TDAS G5 serial numbers should start with '5M' Serial number belongs to a TDAS G5 Error importing {0} "{1}" Tell user there was an error importing {object type} "{object name}" Do you want to update the sensors, calibrations, and hardware in this test? Yes will update, No will proceed without updating. Error importing sensor {0} - conflicts with an existing sensor of a different type Capturing DAS attributes SLICE 6 Distributor (In-dummy) SLICE 6 Distributor (In-dummy) SLICE 6 Distributor (AIR) SLICE 6 Distributor (AIR) DataPRO XML File (*.xml)|*.xml|All Files (*.*)|*.* Export cancelled File {0} will be overwritten. Press OK to continue or cancel to return without overwriting. DataPRO XML File (*.xml)|*.xml|All Files (*.*)|*.* There are unsaved changes, press OK to save changes or Cancel to continue on without saving. (None) Calculated channel '{0}' has no input channels or refers to channels no longer in test Failed Trigger signal for {0} is shorted. Please check trigger signal line. Saving the test setup will update all cached items to their current state in the database. Press OK to continue or Cancel to return without updating or saving. Rack {0} configuration has changed since test was configured. Modifying Group position will cause all customized parameters (Range (CAC), Channel Filter Class, and Polarity, etc.) to default to Group settings. To preserve any custom Test Setup parameters, change parameters after setting the position of a Group. Units Database version {0} is required ({1} was found). Database Control Copy Failed to backup local database Failed to connect remote database Failed to copy remote database - UDP discovery currently unavailable Units required Unipolar Default Filter Export Export custom channels Import Import custom channels Export Import ROI x Channels ROI Channel Selection ROI x Channels Channel filter class Starting region download Error: Unable to read EQX FileInfo from file Error: Invalid version {0}. Only EQX versions less than or equal to {1} are supported for sensor import. Error: Unable to Parse EQX version from file There are out of date items in test setup. Press OK to continue test setup without updating. Cancel will remain on this page. Because some sensors in the test have been deleted the test setup has to be updated in edit test setup. Failed to save test. non distinct test object for group {0} TDC Configuration File (*.ini)|*.ini|All Files (*.*)|*.* Use dynamic groups with CSV, EQX import Delete modified Test Setups before date Delete Test Setups Delete Summary Description Channel(s) ISO 13499 channel name ISO 13499 code Mixed User channel name User code {0} Channel(s) in {1} group test System ID System Location Are you sure you want to delete the selected channel code(s)? Press OK to delete or Cancel to return without deleting. Warning: channel {0} contains a duplicate ISO channel name Warning: channel {0} contains a duplicate ISO code Error: sensor electronic id {0} ({1}) appears more than once Warning: channel {0} contains a duplicate user channel name Warning: channel {0} contains a duplicate user code Warning: channel {0} contains no ISO channel name Error: channel {0} does not have Delay (ms) defined Warning: channel {0} contains no ISO code Warning: channel {0} contains an empty user channel name Warning: channel {0} contains no user code Warning: channel {0} refers to a sensor no longer available and an additional ({0}) errors Error: {0} does not support bridge mode {1} Error: {0} does not support digital inputs Error: {0} does not support digital outputs Error: {0} shares a hardware channel assignment with another channel Error: {0} does not support any excitations used by {1} on channel {2} Error: {0} does not support squibs Warning: {0} contains a sensor ({1}) with an overdue calibration Warning: Calibration is due for {0} on {1} ISO Code ISO Name User Code User Name Sensor Filter selection and the ISO Code filter encoding don't match. ISO Name required. ISO Code required. User Name required. User Code required. Error: There are no data channels in test Warning: There are no hardware channels in test Error: Group name already exists Error: Group name required Drag and drop sensors or hardware here to create new channels Drag a squib or digital output hardware channel to create a squib or digital output setting Verifying DAS Arm State Region of interest "{0}" has no channels to download Show bottom row Copy Calibration due or overdue for {1} on channel: {0} The following items were updated from the db: Test channels Warning: There are no channels collecting data Warning: ISO code {0} is invalid Error: Duplicate group name {0} Low tolerance value is greater than high tolerance value Start shorted: Test tags: Error: This Test Setup is not compatible with your Tags (see below) and will not be saved. User tags: SQ Current (A) Zero Method Error: channel {0} contains a duplicate ISO code Error: channel {0} contains an ISO code that is not 16 characters. (Error) Test must be updated from db before it can be saved. Removing this Group will cause one or more channels to no longer be displayed in the following graph(s): {0}Additionally the group is currently unique to this test setup and won't be available in available groups. Would you like to continue? This group is currently unique to this test setup and won't be available in available groups if removed. Would you like to continue? Sensor {0} appears multiple times in the test setup. Error: sensor electronic id {0} ({1}) appears more than once Software filters Test Details Please refresh the list. Test Setup doesn't appear in the database and may have been deleted by another user: SLICE 6 distributor serial numbers should start with 'S6DB' Warning: multiple graphs have the same name Warning: graph {0} has no channels SLICE Distributor serial numbers should start with 'SD' SLICE PRO Ethernet Control serial numbers should start with 'SPE' SLICE Mini Distributor serial numbers should start with 'SPM' Sensor "{0}" not found in database Test Setup not complete CLR is not currently enabled on SQL server. Please enable CLR and reconnect. Fire TOM digital outputs during diagnostics Digital outputs (only applies to trigger check) Off On Group {0} is being edited by {1} on {2}. Press OK to take control of group or cancel to remain on the page without editing. Taking control of the group will end the edit by {1}. Edit session of sensor {0} was lost Edit session of sensor {0} was terminated by {1} on {2} Sensor {0} is being edited by {1} on {2}. Pressing OK will get edit control over the sensors listed and end the edit sessions of the users currently editing the sensors. Pressing cancel will skip the sensors listed and keep the the existing edit sessions in place. Sensor {0} is open for edit by {1} on {2}. Sensor {0} is being edited by {1} on {2}. Press OK to take control of sensor or cancel to remain on the page without editing. Taking control of the sensor will end the edit by {1}. Are you sure you want to delete sensors {0} … {1} ({2} total)? Are you sure you want to delete sensor {0}? Are you sure you want to delete sensors {0} and {1}? Group {0} is being edited by {1} on {2} Pressing OK will get edit control over the sensors listed and end the edit sessions of the users currently editing the sensors. Pressing cancel will skip the groups listed and keep the the existing edit sessions in place. Are you sure you want to delete group {0}? Are you sure you want to delete test {0}? Are you sure you want to delete groups {0} and {1}? Are you sure you want to delete tests {0} and {1}? Are you sure you want to delete groups {0} … {1} ({2} total)? Are you sure you want to delete tests {0} … {1} ({2} total)? Edit session of group {0} was lost Edit session of test {0} was lost Edit session of test {0} was terminated by {1} on {2} Edit session of test {0} was terminated by {1} on {2} test {0} is being edited by {1} on {2}. Pressing OK will get edit control over the tests listed and end the edit sessions of the users currently editing the tests. Pressing cancel will skip the tests listed and keep the the existing edit sessions in place. Sensor settings Allow push/pull of Group modifications to Test Setups Enable region of interest (ROI) download options Use linear sensitivity, if available Calibration Behavior Use non-linear sensitivity, if available Use both sensitivities, if available, as separate channels Add Linear Linear Sensitivity Details Non-Linear Sensitivity Details Remove Linear ISO Code Push to Test Setups Cancel OK Are you sure you want to push Group changes to the following test setups?{0}{1} Are you sure you want to pull Group changes?{0}The following test channels will be impacted:{1} Tests Using Save and push to Test Setups OK Group is not modified, and no Test Setups are out of date, so pushing to Test Setups would not have any effect Cancel Skip OK Cancel OK All Test Setups that Group changes will be pushed to are being edited.{0}Press OK to end the edits and push Group changes to all Test Setups, or Cancel to remain on the page without pushing changes.{0}{1} Some Test Setups that Group changes will be pushed to are being edited.{0}Press OK to end the edits and push changes to all Test Setups, Skip to only push changes to Test Setups not being edited, or Cancel to remain on the page without pushing changes.{0}{1} (locked) The Group is currently in edit mode{0}{0} Some Groups in this Test Setup have been modified in the Groups tab. Click "Pull group" for any Group to get the latest version. Apply sensor data when assigning channel Apply setting to all users Pull group The following groups are already open for editing: The following sensors are already open for editing: The following tests are already open for editing: Press OK to end the edit sessions and continue with the import, or Cancel to leave the existing edit sessions alone and cancel import. Multiple (see Hardware) Error: DAS sample rates are not evenly divisible Error: Common Status Line not supported with multiple sample rates Cancelled Added Linear Sensitivity has the same ISO Code as the parent sensor. Cancel OK OK All Test Setups that Group changes will be pushed to are being edited. Higher permissions are needed to modify Test Setups in use.{0}{1} Some Test Setups that Group changes will be pushed to are being edited. Higher permissions are needed to modify Test Setups in use. Press OK to only push changes to Test Setups not being edited, or Cancel to remain on the page without pushing changes.{0}{1} Export {0} contains multiple sample rates. The export will be resampled using linear interpolation to the highest sample rate in the test. Test sample rate Data recorders Test sample rate Error: Level Triggers not supported with multiple sample rates The following Test Setups have been deleted and will not be updated: {0}{1} {0} not found - update not possible. OK An Unused Axis was not selected when {0} was configured. Sensor calibration date is older than the most recent calibration date. Would you like to remove calibrations with a more recent calibration date? Press "Yes" to remove newer calibratrion date entries or "No" to leave the existing entries in place. Press "Cancel" to cancel operation. User value 1 User value 2 User value 3 Channel "{0}" (hardware channel "{1}") has not been assigned to an enabled Region of Interest Serial number belongs to a TDAS PRO Lab rack Serial number belongs to a TDAS PRO rack TDAS PRO Lab rack serial numbers should start with 'LR' TDAS PRO rack serial numbers should start with 'DR' File does not contain valid XML, required by EQX import Error: Calibration is due for {0} on {1} Error Warning Unable to delete group {0} - it may have already been deleted by another user Linear sensitivity Non linear sensitivity Channels which have no DAS, sensor, code or channel name set will be removed. Press OK to continue on without making any changes, or Cancel to remain on page Issue connecting to db Failed - file not found - Sample rate WARNING! Squib resistances still present, squibs are ARMED AND CAN FIRE. WARNING! All TOMs are not in the SAFE position. Click Retry to check again or Proceed to continue Error: Channel {0} refers to a sensor that is not available (missing/broken/do not use) WARNING! Squib resistances still present, squibs are ARMED AND CAN FIRE. WARNING! All TOMs are not in the SAFE position. Click Retry to check again. One or more channels were not downloaded Error: Channel {0} has no squib fire mode set Sample rate SLICE 6 Channel {0} was detected as IEPE and does not support sensor {1} Channel {0} was not detected as IEPE and does not support sensor {1} Sensor EID {2} on channel {0} belongs to IEPE sensor {1}, but channel was detected as non IEPE Sensor EID {2} on channel {0} belongs to non IEPE sensor {1}, but channel was detected as IEPE Type Available IEPE Not available IEPE detection High (V) Low (V) Measured (V) Source Voltage Source Voltage Current calibration is incompatible with IEPE type. IEPE supports only linear non proportional sensor calibrations. The current calibration will be reset with a blank linear calibration. SLICE 6 AIR serial number should start with 'S6A' SLICE 6 AIR SLICE 6 AIR TCF ROI Details Multiple Events Details The export INI settings will be used for upload instead of the test specified settings. Some units do not support post test diagnostics and will not run AAF Streaming is not allowed. Set the AllowStreaming setting to True to allow. Set DAS to Streaming Use flat folder structure Software trigger Resultant Error: {0} contains a sensor ({1}) with an overdue calibration Warning: {0} contains a sensor ({1}) with a calibration due soon ({2}) Sensor calibration overdue policy Sensor calibration due warning period (days) Type Polarity: Not Armed, nor Streaming (restart will not arm unit) Waiting for DAS to restart and begin streaming Some hardware does not support streaming Warning: DAS is ready to begin streaming when restarted.{0}{0}Clicking 'Stop Monitoring' prior to removing the ON signal will allow the units to be controlled when they re-connect, without having to restart DataPRO. OK Streaming Stop Streaming Warning: DAS is streaming! Units can now be disconnected and the ON signal removed. Units will automatically begin streaming when the ON signal is applied.{0}{0}Clicking 'Stop Monitoring' prior to removing the ON signal will allow the units to be controlled when they re-connect, without having to restart DataPRO. OK Warning: One or more groups have been modified Getting test setup Getting test setups Ready Coupling mode Home Database Id Waiting for user input The following test setup(s) already exist: {0} Press OK to continue and overwrite existing test setups. Press Cancel to remain on page without overwriting. Warning: This test setup has Calculated Channels, but your System Settings aren't enabled to use them Current test setup is not complete and cannot be run, additionally there were no modifications to save. Starting check channels Starting run test Test incomplete, cannot proceed to check channels Test incomplete, cannot proceed to run test Supports realtime HIC Acceleration X Acceleration Y Acceleration Z Clip length (ms) Error: Calculated channel {0} contains DAS recording at multiple sample rates Error: Calculated channel {0} is set to display in realtime, but contains multiple DAS Error: Acceleration X invalid ({0}) Error: Acceleration Y invalid ({0}) Error: Acceleration Z invalid ({0}) Error: HIC requires 3 acceleration channels ({0}) Invalid units for {0}, channel {1} In Warning Period Out Of Date In warning period Out of date Clocks Check clock sync Clock sync Clock sync check DAS Clock sync profile Status Clock sync check Clock Master Input Clock Type Clock Slave Input Clock Type Clock Master Output Clock Type Clock Slave Output Clock Type Clock sync Streaming - active HIC Resultant Cancel the group {0} could not be updated, the source group may have been deleted by another user. Detecting channel types In Warning Period Out Of Date Cal Due Date Cal Due Date In Warning Period Out Of Date Enable input and output clock source options Invalid calibration interval (Interval value should be between {0} and {1}) Level Triggers: None Error: At least one Level Trigger is required Added: Removed: High High (mV) High (V) Initial offset Sensor Voltage Low Low (mV) Low (V) Threshold (%) High (mV) Midpoint (EU) Low (mV) Initial offset eu high is less than low threhsold Display offset in EU Initial offset (EU) Initial offset (mV) Sensor Voltage (V) Initial offset in eu center and percent required File does not appear to be in TDC CSV format (no recognized column headers were found). Please verify file and format. No channels are currently set to collect data, please assign a channel. Remove backslashes from sensor serial numbers Actual Range high limit (%) Actual Range low limit (%) Range overhead factor (%) Keep ROI and Multiple Events downloads within test folder Show Sensor/Channel user values The Show Sensor/Channel user values checkbox needs to be checked to modify User Value 2. Error: User Value 2 in Parameters step must be a double when TTS export is selected. Done Device {0} has changed ip address since it was originally discovered. Please use hardware discovery to update the ip address. Failed Checking out hardware The following unit(s) are currently armed: {0} The following unit(s) are currently set for auto-arm: {0} The following unit(s) are currently in realtime mode: {0} The following unit(s) are not available: {0} The following unit(s) are connected, but not in the db: {0} The following unit(s) are currently ready to stream: {0} The following unit(s) have changed configuration: {0} The following unit(s) have expired calibration dates: {0} The following unit(s) have unexpected channel counts: {0} The following G5(s) docking stations were not detected: {0} - Click "OK" - SWITCH OFF Docking Station - REMOVE POWER from Docking Station and wait 10 seconds - APPLY POWER to Docking Station, SWITCH ON and try again The following unit(s) have unexpected firmware versions: {0} The following unit(s) have unexpected memory space: {0} The following unit(s) were detected with flash issues: {0} The following unit(s) are currently attached but are not part of the test: {0} The following unit(s) are currently streaming: {0} Auto-armed Missing dock station Ready to stream ROI Suffix Error! The following unit(s) are currently in realtime: Warning! The following unit(s) are currently armed: Warning! The following unit(s) are currently in realtime: Are you sure you want to apply these defaults to the following user(s)? Display name Modified Modified by Role Search: Tags: Test setup settings for user: User name Apply to: Save and push Push Allow push/pull of sensors Push to both Push to groups Push to test setups User code, User channel name, ISO (13499) code, ISO channel name (the preceding only if blank), Capacity, Polarity, Default filter, Software zero method (and Start/End), and/or Initial offset Input mode, default value, active value Output mode, limit duration, duration Are you sure you want to push parameters for sensor(s): Firing mode, delay, duration, limit duration, current Active value Are you sure you want to pull parameters for sensor(s): The following sensor(s) are currently being modified by other users: Do you want to end the edit session(s) for these sensors? Press Yes to end the edit session and pull parameters, or No to leave the edit session(s) in place. The following sensor(s) are currently being modified by other users. Parameters from these sensors will not be applied: Default value Delay (ms) Duration (ms) Filter Fire mode Input mode Limit duration No changes to pull. Output current Output mode Polarity Range Zero method (mode/start/end) Pull sensor parameters The following group(s) are currently being modified by other users. These groups will not be modified. The following sensor(s) are currently being modified by other users. These sensors will not be pushed: Affected group(s): Affected test setup(s): The following group(s) are currently being modified by other users: The following sensor(s) are currently being modified by other users: The following test setup(s) are currently being modified by other users: Do you want to take control? Select yes to start pushing parameters and end the modify session by other users. Click No to leave other users modify sessions active and to push settings except for these items. Pull sensor parameters PowerPRO PowerPRO PowerPRO Battery Login: Use UDP streaming Tags This Group is not compatible with your Tags (see below) and will not be saved. This Group is not compatible with your Tags (see below) and will be removed and not listed in Available groups if you choose Continue. Would you like to continue? Group Tag(s): Cancel Continue User Tag(s): PTP Type/Mode Input clock(s) not synced Input clock(s) synced Cancel Current view: Change current test setup Change view DataPRO Logout OK Search: Users (Not synced) (Synced) Offset type Value (EU) Value (mV) Circular buffer + UART Recorder + UART Warning: Offset type '{0}' appears multiple times Warning: EU at mV is only used on linear calibrations Warning: No offset type set for at least one offset entry PowerPRO serial number should start with 'PPRO' Additional Details Channel code details Customer details Lab details Engineer details Additional Details Delete Are you sure you want to delete {0}? No items selected total Changing tabs will result in loss of information that could not be saved. Press OK to continue to new tab, or cancel to remain on current tab. Run check failed arm process, check log for details. Add group Edit group Add test Edit test Warning: No initial offset set on channel Downloading UART No UART data to download Circular Buffer + UART Recorder + UART The following tests(s) are currently being modified by other users. These tests will not be modified. Measuring resistance Checking clock sources Checking UART settings Rebooted Setting clock sources Applying UART settings The Clock Source and/or UART settings have changed on the following unit(s). Settings will be updated and the unit(s) will be rebooted. Please wait a moment and check hardware again. Screenshot captured Warning: One or more sensors have been modified Use UTC time in CSV exports Name '{0}' is not unique Are you sure you want to delete {0}? There is no row selected Realtime streaming rate (SLICE) Realtime UDP address Group can not be saved: {0} Press OK to navigate away without saving or Cancel to remain in edit group Test setup can not be saved: {0} Press OK to navigate away without saving or Cancel to remain in edit group Use meter mode Level trigger auto advance Level trigger beep count Level trigger beep interval (ms) Level trigger default value (% FS) Level trigger freeze time (sec) Level trigger require trigger check completion Level trigger qualifying samples Level triggers on All channels have completed level trigger checks. Press 'Proceed' to continue to next step, or 'Cancel' to remain in realtime. Level trigger idle beep Level trigger idle beep interval (ms) Passed Use actual range for ISO-MME Not all channels have passed level trigger in realtime, are you sure you want to proceed? Click Proceed to continue or cancel to remain in realtime. Error: '{0} is not a valid ISO position (channel {1}) Error: '{0}' is not a valid ISO test object (channel {1}) Manage master clocks outside DataPRO? Manage slave clocks outside DataPRO? Warning: Sensor {0} on channel ({1}) range exceeds capacity {2} < {3} Streaming Address Click Retry after re-connecting, Proceed to continue disarming as-is, or Cancel to go back Click Retry after re-connecting, Proceed to continue exiting streams as-is, or Cancel to go back Failed to disarm Channels Diagnostics timed out, try increasing diagnostics timeout value Diagnostics timed out due to communication drop with units: Actual value (Digital Input) Expected value (Digital Input) System settings currently open by {0} on {1}. Press OK to end edit session of {0}, or Cancel to return. Warning, Sensor {0} has no calibration history Warning, Sensor {0} has a calibration with an unsupported excitation {1} Warning, Sensor {0} has a calibration for an excitation not supported by the sensor ({1}) Are you sure you want to delete user(s) {0}? There was an error in creating/keeping the realtime connection. Check necessary realtime, network, and clock settings and click Retry to try again. Click Proceed to otherwise continue. Invalid hardware assignment, rack {0}, module {1}, channel {2} EQX First use date Has been used since calibration Export first use date Import first use date if present Warning: Sensor first use date ({0}) is before calibration date ({1}) Warning: First use date is in the future ({0}) First Use Date Destructive/impact test (will set First Use Dates (if needed) and increment Sensor Usage counts) DAS first use date differs Add hardware Delete hardware Edit hardware Add/Edit/Replace hardware Replace hardware Edit/Add Hardware Extra Properties Extra Properties (channel) Layout report Gain High Low Measured gain Add Hardware Export Settings Import Settings Browse DataPRO Settings XML File (*.xml)|*.xml|All Files (*.*)|*.* Description Done Export file Failed The file {0} will be overwritten. Do you wish to continue? OK to continue or Cancel to cancel. Included Type Waiting Working Global settings entries Settings not found Test Setup Default settings entries Settings imported Done Export Export Settings Done Import Import Settings Enable editing device AAF rate {2}Error: AAF Rate entered for {0} is out of range (max is {1}).{2}Check the "Enable editing device AAF rate" checkbox in System Settings to modify the "AA Filter (Hz)" field in Hardware step. Usage Report Run Report file Browse XML File (*.xml)|*.xml|All Files (*.*)|*.* Cancelled Done Failed Sensor Waiting Working Data Recorders Report File Include All Clear All Browse Run DAS Done No DAS have been selected. Please select DAS to include in report. The DAS usage report file must be specified. Failed Waiting Working XML File (*.xml)|*.xml|All Files (*.*)|*.* Usage Report cancelled The file {0} will be overwritten. Do you wish to continue? OK to continue or Cancel to cancel. Usage Report Run No sensors have been selected. Please select sensors to include in report. The sensor usage report file must be specified. Group Test Setup Single-channel diagnostic testing is unavailable for this channel. Please choose to Run all or Run (DAS) to obtain results instead conflicts with Warning: Only bridge resistances in the range of 100 to 32000 Ω will be used Warning, failed to push group to test setup {0} The DAS export file must be specified. No DAS have been selected. Please select DAS to include in export. Channel Name Some customer details were missing a name and were not imported Some lab details were missing a name and were not imported Some test engineer details were missing a name and were not imported There is standin hardware in the test. Test can not run till it is replaced with actual hardware. Add new device Current DAS is modified, save before switching to a new DAS? TSR-AIR DIR TSR AIR DIR Export dual sensitivity sensors in the same file (CSV, XLSX) High (V) Low (V) DKR Embedded Sensors TSR-EthC-RevB DKR Missing excitation for {0} (sensor serial {1}) Chapter10 Chapter 10 Bypass check Measure squib resistances step Measure squib resistances Warning: Measure Squib Resistances step was chosen, but no Squibs are in the test. Step will be skipped. PowerPRO cal interval (days) SLICE 6 AIR cal interval (days) SLICE 6 Distributor cal interval (days) SLICE 6 cal interval (days) TSR AIR cal interval (days) No Yes Are you sure you want to restore all settings to defaults? Angular 1 Angular 2 Angular 3 Atmosphere High g Linear 1 High g Linear 2 High g Linear 3 Humidity Low g Linear 1 Low g Linear 2 Low g Linear 3 Temperature No region of interest has been selected for export No region of interest has been selected for download Automatically start DAS discovery when doing Quick Build Automatically Run Test when doing Quick Build Failed to generate ROI data from all dataset File not found Apply hardware channel assignment when discovering sensors TSR AIR settings TSR AIR family test setup settings for user: Test history settings Warning, failed to store test history in db OK Warning, failed to update configuration on {0}. Configuration was missing on {0}. Apply configuration from test to affected units? Are you sure you want to delete '{0}'? Test history Please repeat deletion confirmation. Warn and verify when deleting group channels Allow channel deletion from a fixed group in Test Setup Sensor Test History Done History Sensor Test History AAF (hz) Cal date Capacity Hardware ISO channel name ISO code Range Samples per second Sensitivity Serial number User channel name User code Arm time Description Destructive Name Test Id Test History Browse Export File Please select a filepath to export to Failed to export history file Nothing to export No usable test setup to export Could not export test setup Test setup Streaming DSP filter type {1} event number #{2} {0} recorded no trigger during event SLICE 6 lite distributor serial numbers should start with S6DB3 Event number #{2} {0} recorded no trigger during event {1} - {0} recorded no trigger during event No events were selected. Other {0} recorded no trigger during event Automatic mode status: SLICE 6 Distributor 3 SLICE 6 distributor 3 File '{0}' has a space at front or end of the file name and can not be loaded. Digital input Digital output Warning: {0} changes do not automatically take effect in groups and test setups. To update groups and test setups, either 1) remove and re-add affected channels, or 2) check the “Allow push/pull of sensors” checkbox in the System Settings tab and then use the push button with the sensor selected in the Sensor Database tab. {0} changes are not automatically pushed to groups and test setups. Use push to push changes. Sensor Squib setting Build Test Setup DAS configuration is missing. Click 'Query selected' button to update. No DAS connected No Test Setup was built Querying Test Setups on selected DAS Test Setup '{0}' was successfully built {0} DAS will be interrogated before building a Test Setup. OK to continue? Aggregate status Devices Distributor Status Status ATD Error - {0} reported {1} trigger shorted Remember test id affixes Always show TSR AIR settings Angular rate Angular rate X Angular rate Y Angular rate Z High g linear Linear acc X Linear acc Y Linear acc Z Low g linear Mixed Event start method Power management/Wake up Sensor sample rates Above or below +/- Dynamic trigger Environmental conditional trigger Angular acceleration above below Humidity Pressure Temperature High g linear acc Low g linear acc Automatically removes Linear acc, Angular acc, and ARS, from test Battery saver mode Wake up and arm on: Temperature, humidity, pressure Warning: Angular rate level trigger enabled but no axis has been enabled Warning: High g level trigger enabled but no axis has been enabled Warning: Humidity level trigger 'above' value is greater or equal 'below' value Warning: Angular sample rate is invalid Warning: High g sample rate is invalid Error: '{0}' has an invalid level trigger value '{1}' ({2} g and {3} g are the limits). Warning: Low g sample rate is invalid Warning: Temperature, humidity, pressure rate is invalid Warning: Low g level trigger enabled but no axis has been enabled Warning: Pressure level trigger 'above' value is greater or equal 'below' value Warning: Temperature level trigger 'above' value is greater or equal 'below' value Diagnostics is out of date for one or more of the units in the test. Data collection with uncalibrated units is not allowed. Please re-run the diagnostics step. deg/s Angular acceleration & rate MOD Sensor File (*.mod) Sensitivity units were corrected on the following sensors using proportional to excitation information: Native database: v RTC Schedule event duration: RTC Schedule start time (UTC): Timed interval event duration (ms): Timed interval number of events: every Timed interval frequency: Timed interval unit: Warning: Level trigger enabled but no trigger selected Single event data capture. This method does not support multi-event modes. Trigger method: ASC ASC Warning: “Enable level-trigger UI” on the System Settings tab is currently unchecked, but one or more test setups being imported have level triggers Allow Quick Build Default Test Setup Name Importing Test Setup... Done Waiting Click on a DAS to build the Test Setup Working Failed Attributes Channel Group Hardware Settings Channel Recorder and stream Circular and stream Circular and stream Recorder and stream Run test setup deg/s² Angular acceleration Angular acceleration X Angular acceleration Y Angular acceleration Z Duration (hh:mm:ss) Magnet wake timeout (sec) Motion wake timeout (sec) Session start Warning: Session duration must be greater than 0 Warning: Session start time must be in the future Included hardware will be sampling at rates: {0} Sample rate per device is displayed and configurable on the Hardware navigation step Warning: RTC schedule trigger is a single-event data capture, but multi-event recording mode selected. Active Circular buffer + UART Multiple-event active Multiple-event circular buffer Multiple-event recorder Recorder + UART Error: Sensor average over time window start is after end for sensor A test setup with TSRAIR devices require realtime To continue troubleshooting the failure for device(s) {0} Please proceed to realtime. Invalid recording mode Error: Unsupported recording mode ({0}) on [{1}] DIR/DKR TSR AIR Check wake up Interval trigger Time interval triggers Scheduled triggers Events Frequency Wake up Wake up: waiting Wake up: mixed Bypass check Cancel wakeup check Software trigger Warning: The following DAS will not be loaded as they contain an unknown DAS type: Hybrid recorder multiple-events Multiple-event hybrid recorder Monitor Test Status Save and create report Test setup must be saved before report is created SLICE 6 AIR Ethernet Recorder UART UART Baud rate Binary Data bits Data format Even Flow control Mark Name NMEA Odd 1.5 1 Parity Text RTS RTS/XonXoff Space Stop bits 2 XonXoff UART Error: {0} does not support uart i/o UART settings channels are included in the test, but no UART recording mode has been chosen A UART recording mode has been chosen, but no UART device channels were added to the test Please enable UART recording modes in System Settings UART Baud rate Data bits Data format Flow control Parity Stop bits There are currently no UARTs assigned The following Groups had Channels assigned to unknown DAS and have had the assignment removed: Help Help Stream Out Stream output Data channel id Time packet interval (ms) Time channel id TmNS config UDP address Stream profile There are currently no stream outputs assigned stream output Error: {0} does not support streaming output Stream Out Streaming settings channels are included in the test, but no streaming recording mode has been chosen A streaming out recording mode has been chosen, but no streaming settings channels were added to the test Please enable streaming recording modes in System Settings Valid TmNS configuration string required (8 parentheses-enclosed, comma-separated integers) When a streaming mode is chosen, all DAS must have a streaming setting channel included in the test Normalizing ids Calibrations Channels Customer details Engineer details Groups Hardware Lab details Sensors Test setups Users Reading xml Sample rate for test is not available: Use dropdown lists for test object and position The following sensors are in the database without the corresponding EID found on the DAS:{0}{1}{2}{3}{4}Ignore conflict(s) and continue? No Yes Use AC coupling Invert start record completion Invert trigger completion Warning: The following DAS do not support the test event line completion modes: Warning: Ignore shorted trigger is on and there is a TOM attached. This could result in system triggering and firing squibs on arm. Warning: Ignore shorted trigger is on and there is a TOM included in the test. This could result in system triggering and firing squibs on arm. Streaming Db copy failed - Generate PSD Reports Generate power spectral density reports Done Scanning for power loss Scanning for peaks and troughs There was an adjustment to the T0 on the following DAS: Updating attributes Customer preset Lab preset Engineer preset Current test Masking EU meta data Waiting for schedule start Scheduled start time must be at least {0} minutes after unit(s) are armed. Scheduled Interval length in minutes: Schedule start time (UTC): Waiting for next interval Interval length in minutes: Schedule start time (UTC): Interval length must be more than Event length plus {0} seconds Interval between event starts in minutes Wake up with motion Interval Error: No hardware included in test support UART recording Start recording with event line Allow TSR AIR recording modes Error: Recording mode {0} can't be used with 'Set DAS to Auto-Arm' Waiting for motion Warning: DAS is armed and waiting for the end of the current interval between events. Warning: DAS is armed and waiting for the scheduled start time. SLICE PRO Distributor DataPRO Test Setup XML File (*.xml)|*.xml|TDC Test Setup File (*.tsf)|*.tsf|DataPRO Test Sensor Import File (*.csv)|*.csv|TTS (*.csv, *xml)|*.csv; *.xml|CrashDesigner (*.xml)|*.xml|EQX File (*.e2x)|*.e2x|All Files (*.*)|*.* DataPRO Test Setup XML File (*.xml)|*.xml|Instrumentation Setup File (*.isf)|*.isf|TDC Test Setup File (*.tsf)|*.tsf|DataPRO Test Sensor Import File (*.csv)|*.csv|TTS (*.csv, *xml)|*.csv; *.xml|CrashDesigner (*.xml)|*.xml|EQX File (*.e2x)|*.e2x|All Files (*.*)|*.* The following device(s) recorded no ethernet data: Waiting for event to start recording Warning: DAS is armed and waiting for an event to start recording Error: A pretrigger or posttrigger is required for data collection. stream input Stream input Well-formed udp address string required. Format is 'UDP://x.x.x.x:yyyy' UDP address Stream profile There are currently no stream inputs assigned Error: {0} does not support streaming input Stream In Stream In All included DAS with a streaming input channel must have it included and configured in the test Warning: There was an issue while downloading data, data files may be incomplete Warning: The specified download path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the download directory name must be less than 248 characters. Please correct the issue and try again. Warning: There are multiple UDP streaming outputs with the same destination address and port. Error: Unsupported streaming profile ({0}) on [{1}] The license file version {0} is not supported anymore The current license file is for DataPRO version {0} and not the DataPRO version that you are using. stream output Stream output Current time (UTC): Current time (UTC): Current time (UTC): All stream-out channels must be assigned to a hardware channel. Test Setup validation error in {0} Falcon The following hardware does not support {0}: {1} Error: Unsupported clock sync profile ({0}) on [{1}] Error: TSRAIR devices in Active mode starting recording via level triggers require a pre-trigger time greater than 0 Advanced settings {0} is an invalid multicast address, value has not been set SLICE6 multicast broadcast address SLICE6 multicast response port Error: Test uses recording modes which are not currently available. Switch to a user with access to recording mode {0} or modify the allowable recording modes in Test setup settings step of System Settings. Error: Test uses TSR AIR recording modes which are not currently available. Switch to TSRAirUser or enable 'Allow TSR AIR recording modes' in Test setup defaults section of System settings. SLICE PRO Distributor serial numbers should start with 'SPDB' SLICE PRO Distributor Error: {0} does not support the requested streaming mode. Please check the firmware version on the unit. IENA key Source port Minor per major Message Id Subframe Id TMATS port Repeat Auto-Arm Repeat Streaming Warning: '{0} is not a valid ISO position (channel {1}) Warning: '{0}' is not a valid ISO test object (channel {1}) Ignore shorted start Ignore shorted trigger Error: Other clients connected to this db may not support the clock sync profiles chosen (minimum version: {0}, current version: {1}) {0} reported error during last auto arm: {1} S6DB RTC expected battery life (days) Warning: The following distributor(s) have RTC batteries that are near their expected life: Failed to write temperature log, {0} Warning: The following distributor(s) have RTC batteries that were disconnected or lost power: Temperature time format Temperature value format Power devices Failed to start downloading. Please try running download again. A unit is configured with the ADC-to-UART streaming profile, but has no corresponding UART settings channel added to the test Allowed noise (% FS) {3}Warning: AAF Rate entered for {0} ({1}) is greater than the sample rate ({2}).{3}Check the "Enable editing device AAF rate" checkbox in System Settings to modify the "AA Filter (Hz)" field in Hardware step. TMATS interval (ms) {1}Warning: SLICE6Air sample rate cannot be higher than {0} when digital filtering.{1}DSP filtering can be set to "None" in the "Advanced settings" step on the "System Settings" tab.{1} Display UTC time in CSV exports as seconds from 1/1/1970 Error: At least one DAS selected to use GPS for clock sync doesn't have a UART settings channel configured in the test UART settings channels are included in the test, but no UART streaming has been chosen Create voltage input channels Voltage measurement Error: Start and end time can't be the same Error: End is greater than max available Error: Start can't be after the end Error: Start is less than min available Error: GPS via UART only for clock sync has too much drift. Please select GPS + 1PPS for Clock Master Input Clock Type and physically set up your device(s) accordingly Change ‘Clock master default profile’ (System Settings > Test setup settings > Clock sync options) as well to avoid this error in new test setups SLICE 6 AIR-BR Warning, removal of leap seconds was requested, but the firmware on {0} does not support it. Remove leap seconds Remove leap seconds from streaming timestamps Number of ADC samples per packet Number of samples (for all channels in stream) to include in each data packet in stream. Error: Streaming is not available on {0}. Please contact DTS to add this feature. Error: Streaming is not available on {0}. Please contact DTS to add this feature.{1} Awake, waiting for trigger The UI language has been changed to English, but the change won't display until DataPRO is closed and reopened. Restart DataPRO? Whether to save snapshot to windows clipboard or to CSV files Save snapshot to clipboard SLICE 6 AIR-BR Advanced stream profiles can be enabled in System Settings - Sensor settings Invalid stream profile: {0} Error: Test is set up for a non TSR AIR streaming mode. Uncheck "Set das to streaming" and ensure a TSR AIR streaming mode is selected and then check "Set das to streaming" again. Error: Test includes a TSR AIR but "Allow TSR AIR recording modes" is not selected for the user in System settings -> Test setup defaults Child {0} was detected, but parent {1} was either not detected or didn't list the child as connected to it. Disassociate these devices? On Passed (Low Battery) The following unit(s) have a low battery: Open Manuals folder Include secondary header Warning: Stream and record should not be used with sample rates greater than 20,000 sps. Error: Test Object value {0} is invalid Error: Position value {0} is invalid ({0} in {1}) some channel(s) Warning: The following units were detected with Voltage Insertion on and any collected data may be affected. Test Id Run Test Checkout Sample Rate (per sec) Mode Post Trigger (sec) Test Length (sec) Pre Trigger (sec) ROI End (sec) ROI Start (sec) Type Unassigned Assigned Import File Test Setup Name Test Setup not complete Warning, not all channels expected were downloaded. If this is unexpected please contact technical support before arming or running diagnostics again. Expected: {0}, Actual: {1} Channels summary DAS summary DAS info Add DAS serial number line to CSV export THF Sensor Database (*.accdb) Failed to successfully open THF database connection Failed connection open using {0}: {1} Failure while processing THF data: {0} Successfully opened connection using {0} Analog D in D out ECM G5 G5 (VDS) PPRO Rack S1 S1.5 S6 S6A S6A-BR S6DB S6DB3 SLD SLE SLS SLT SPD SPDB SPS SPT Stream in Stream out UART Assigned Auto-connect to hardware on hardware step Battery voltage Channel type Connected Serial number EIDs found In import file Input voltage Requested Unassigned Assign Disable Enable Remove Remaining Channels Code Sensor SN DAS Channels DAS Channel EID Cable Multiplier Polarity Capacity Range Sensitivity Sensor Assignment Error The sensor {0} has an EID, but no EID was found.\r\n\r\nPress OK to clear the EID for {0} and assign the sensor.\r\nPress Cancel to leave the EID unchanged and the sensor unassigned. Sensor excitation {0} not supported by channel Sensor {0} does not support any of the excitation options provided by channel {1} Sensor {0} does not support {2} excitation option provided by channel {1} Assign sensor? ID on the channel will be applied to the sensor and removed from any other sensors. User feedback required Voltage input Custom Code The CSV file is not in correct format. The CSV file is not for test setup import The EQX file is not for test setup import Current (amp) Delay (ms) Duration (ms) Limit duration Res. High Tol. (Ω) Res. Low Tol. (Ω) Mode Analog Digital In Level Trigger Squib No DAS connected. Please check connections. DAS have disconnected from the system. Please check connections. There are changes not imported yet, press OK to navigate away without importing, or Cancel to return ISO channel name ISO (13499) code Continuous recorder + UART Multiple-event circular buffer + UART Multiple-event recorder + UART Active RAM (multiple events) Active RAM The current viewing user does not have support for Active RAM recording modes turned on, but the selected test has an Active RAM recording mode selected. Error: Level triggers of 5g or less are not allowed with the wake up on motion feature Hard drive parameters may need to be adjusted to run SQL Server on Windows 11. Press yes to get more information on the web. There is also more information available in the manual under "Windows 11 Support" No network resources available, discovery unavailable Warning: Only {0:0.0000}s of pre-trigger is available in this recording mode and rate. and begin recording immediately {0} hrs, {1} mins. Available recording time: Unknown: Test Setup has no hardware Warning: A clock sync profile has been set for the test, but no DAS are set as the clock master DI Active DI Default DI Input mode Squib Current Squib Delay Squib Duration Squib Fire mode Squib Limit duration Invalid Active value: '{0}' at line {1} Invalid Current: '{0}' at line {1} Invalid Default value: '{0}' at line {1} Invalid Delay: '{0}' at line {1} Invalid Duration: '{0}' at line {1} Invalid Fire mode: '{0}' at line {1} Invalid Input mode: '{0}' at line {1} Invalid Limit duration: '{0}' at line {1} Export path: Download path: MCU temp Onboard humidity Env Temp1 Env Temp2 Env Temp3 Env Temp4 Record on boot Record on boot + UART Warning: ROI end ({0} seconds) is after Post-trigger data ({1} seconds) Warning: ROI start ({0} seconds) is before Pre-trigger data ({1} seconds) Remaining time until scheduled recording: Arming is no longer possible. Remaining time until arming is not possible: {0} has a maximum sample rate of {1} SPS at {0} configured channels {0} has a maximum sample rate of {1} SPS when recording UART at {2}bps {0} has a minimum sample rate of {1} SPS Hybrid and stream Circular buffer and stream (multiple events) Hybrid and stream (multiple events) Recorder and stream (multiple events) {0} has a maximum sample rate of {1} SPS when streaming over UART at {2}bps Invalid sensitivity for sensor {1} on channel {0} Failed to clear flash: {0} Export failed, the export path is too long Path to test data would be too long, Use a shorter test id and/or test setup name if possible Destructive test setting must be set before continuing Yes No TSRAIR Go can not launch on the current database. Please contact DTS support to update database. The name {0} is reserved and can't be used There is an ROI for download with no DAS with data for that ROI Arm failed! Click to Arm Click to Disarm Preparing data memory Preparing for arming Updating DAS Configuration Device {0} reported fault {1}. Contact DTS technical support for more information. Invalid stream mode Offline Streaming not available Some events will not include all hardware - The number of events differs on some hardware. Downloading {0} reported an error during downloading {1} Waiting for interval The following hardware was not armed with this software and will not be included in this download: Recording Mode SPS Multiple Level trigger Mixed Master Clock Input Source Master Clock Output Source/ Slave Clock Input Source Schedule start time (UTC) Current time (UTC) Number of events Interval(min) Recording Settings System Status Post-trigger(s) Event length(s) Help Arm Trigger Download View Data Export Data Go back to Dashboard DataPRO TSR AIR Go {0} not found Are you sure you want to close TSR AIR Go? Press Yes to close or No to continue. Auto arm and power on record delay seconds Auto arm record delay in seconds, default value 0 Export CSV Diagnostics Tracking Export finished All channels Low g only Low g + High g Low g + High g + ARS needs The following devices need to be reconfigured in the DataRecorders tab Assembly Maximum usage Usage count Test contains TSR AIR ARS channels at ranges no longer supported Test contains TSR AIR low g channels at ranges no longer supported There are no network interfaces which can addresss {0} ({1}). Please contact support or check manuals for help on configuring your network. Error: {0} contains a sensor ({1}) which has reached or exceeded its maximum usage ({2}) Warning: {0} contains a sensor ({1}) which is nearing its maximum usage ({2} uses remaining) The deviation {0}% is greater than {1}% allowed. please inspect the sensor and the sensitivity value. Approve sensor for use Align UDP to PPS Download and Rearm Warning, the following das have sync with a clock source, but the clock source is in local time, not UTC. Warning, channel {0} is using EU@mV but has a software zeroing method set. The software zeroing will change the EU output which might not be intended when using EU@mV Invalid format Max value is Min value is Export settings Failed to read settings Failed to write settings Import settings There was an error communicating with ({0}). The device may be in boot loader mode (waiting for new firmware). Please contact Technical Support. All (sensor models) None (sensor models) All (sensors) None (sensors) Exclude selected Include selected Filter type for use on streaming DAS when streaming DAS {0} doesn't support streaming filter profile {1} The firmware on {0} doesn't support streaming filter profile {1}. Firmware upgrade required. Streaming rate to -3dB frequency ratio Controls options for -3dB streaming frequency filters Digital filter settings when using 6p Butterworth as the streaming filter System grand master type Manage clock sync settings outside of DP When this is set DataPRO will not control and set the clock settings System grand master is set to PTP1588 but there is also a hardware selected as master. This is an invalid configuration, please change grand master type or remove the hardware master selection. Delete all Failed to write test summary file: {0} Warning - {0} has sensors assigned with EIDs but no EID detection will be done on this das. (None) Port 1 dropped Port 2 dropped Port 3 dropped Port 4 dropped Hub power dropped Device fault Low g accel chip fault ADXL373 chip fault BMI270 chip fault FRAM not detected BME280 chip fault Magnet sensor not detected RTC not detected Ethernet switch chip not detected FPGA not detected NAND not detected Fuel guage fault FRAM wakup fault RTOS fault Network configuration fault DHCP fault Super cap fault Temperature fault Port 1 PG fault Port 2 PG fault Port 3 PG fault Port 4 PG fault BIST test failed Device present fault {0} reported fault(s): {1} Warning: There are a limited number of samples of available in 'Active' recording mode, pretrigger available may be down to {0:0.000} seconds. ROI downloads less than that will use whatever is available. Assembly Maximum Usage Usage Count EU Warning - {0} was missing field 'PhysicalUnit'. 'EU' will be used as the measurement units. Rebooting Unable able to set clock sync for {1}. Firmware may not support this type of clock sync. Error reported by firmware is: {0} Failed to arm Unknown DAS Type Warning: Streaming packets will be fragmented - consider lowering ADC per packet setting in System Settings -> Test settings Packet size not validated due to unknown profile ({0}) Streaming packets too large - consider lowering ADC samples per packet in System Settings -> Test settings Streaming packets too small - consider increasing ADC samples per packet in System Settings -> Test settings Packet not validated due to unsupported DAS type ({0}) Number of ADC samples per packet Enable ADC samples per packet warnings DIAdem Reserved 1 (301) DIAdem Reserved 2 (302) AAF Rate Group Name Channel Sensitivity DIAdem Reserved 1 (301) DIAdem Reserved 2 (302) (Read EIDs is currently disabled) 1 module (8 channels) 2 modules (16 channels) 3 modules (24 channels) Thermocoupler Error: {0} does not support thermocoupler channels Module {0} SLICE6 AIR-TC The following devices need to be reconfigured in the DataRecorders tab ROI '{0}' has no channels selected and will skip exporting Sensitivity can not be zero Bulk edit Bulk sensor edit Sensor resistance in Ω When unchecked sensor is bipolar and extends both directions around 0. Bipolar is the most common sensor type. Bridge resistance Sensor resistance in Ω. Check offset Controls whether sensor offset is measured during diagnostics and compared to tolerances Measure noise Controls whether signal to noise ratio is measured during diagnostics Measure excitation Controls whether excitation is measured and compared to expectations during diagnostics Model Manufacturer model name or type of sensor Manufacturer Manufacturer or marker of sensor User part number User specific meta data for sensor Capacity Offset tolerance low If measuring sensor offset in diagnostics, this is the minimum reading in mV that the sensor offset should be at. Offset tolerance high If measuring sensor offset in diagnostics, this is the maximum reading the sensor offset should be at in mV. Range low Can be used when setting a group of sensors to low, medium or high ranges Range medium Can be used when setting a group of sensors to low, medium, or high ranges Range high Can be used when setting a group of sensors to low, medium, or high ranges Unipolar When unchecked sensors are bipolar, so extended both directions around 0. Bipolar sensors are the most common. Do not use When checked tests should not be able to use this sensor Broken When checked a sensor is broken and should not used for data collection User part number Invert When checked output from sensor is inverted when calculating engineering units. Maximum value in engineering units sensor can read Software filter Controls the default software filter to apply to sensor data Sensors bulk edit Sensors bulk edit Sensors Warning: {0} does not support a list of UDP channels; only {1} will be used. The CSV file is being used by another process SLICE6 sensor interface SLICE6 AIR sensor interface SLICE PRO sensor interface SLICE6 AIR connections SLICE Bridge connections SLICE6 AIR Connector RS-232 RS-422 Error: the following files with test data already exist in {0} {1} and cannot be overwritten. Files in the {0} folder cannot be overwritten. Never overwrite test data Return Prefill test id with setup name Missing Found Number Description SerialNumber Type EID Location Extra EIDs/sensors SLICE PRO CAN FD CAN CAN Warning, failed to retrieve CAN configuration from [{0}] ({1}) Error: {0} does not support CAN channels CAN CAN State Data Errors Last update Active Inactive Logging verbosity Controls the logging verbosity where supported PCM format Analog format Select PCM or Analog format for Chapter 10 export Chapter 10 export can't export both analog and pcm formats at the same time Connection status Current reading (Not tested) Sensor connected Module connected - sensor not connected Interface module not connected {0} reported an issue with {1}