using DTS.Common.Attributes;
using DTS.Common.Behaviors;
using DTS.Common.Converters;
using DTS.Common.Interface.DASFactory;
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Linq;

namespace DTS.Common.Enums.DASFactory
{
    public static class DFConstantsAndEnums
    {
        public const string GENERIC_SPFD_GUID = "11111111-1111-1111-1111-111111111111";
        /// <summary>
        /// suggested realtime rate from LP
        /// </summary>
        public const int SLICE_TC_REALTIMERATE = 200;
        public static int MAX_SAMPLES_TO_FILTER = 100000000;
        /// <summary>
        /// returns true if the das supports turning off AAF Realtime 
        /// http://manuscript.dts.local/f/cases/39409/Don-t-use-the-setting-TurnOffAAFRealtime-for-S6-and-beyond
        /// </summary>
        /// <param name="idas"></param>
        /// <returns></returns>
        public static bool SupportsTurnOffAAFRealtime(IDASCommunication idas)
        {
            if (null == idas) { return false; }
            switch (idas.GetHardwareType())
            {
                case Hardware.HardwareTypes.SLICE2_Base:
                case Hardware.HardwareTypes.SLICE2_SIM:
                case Hardware.HardwareTypes.SLICE2_SLS:
                case Hardware.HardwareTypes.SLICE2_SLD:
                case Hardware.HardwareTypes.SLICE2_DIM:
                case Hardware.HardwareTypes.SLICE_Base:
                case Hardware.HardwareTypes.SLICE_Micro_Base:
                case Hardware.HardwareTypes.SLICE_NANO_Base:
                    return true;
            }
            return false;
        }
        /// <summary>
        /// whether to show ADC as signed or unsigned
        /// http://manuscript.dts.local/f/cases/32992/Add-a-flag-to-show-ADC-in-0-64k-rather-than-32k-to-32k
        /// this property only holds the value of the attribute and does not
        /// store or retrieve it
        /// </summary>
        public static bool AlwaysShowUnsignedADC = false;
        /// <summary>
        /// the time to wait for FPGA to unlatch in a one shot
        /// 
        /// </summary>
        public static int OneShotWaitTimeMs = 3000;
        [Flags]
        public enum TempLogChannelBits
        {
            OnBoardTemp,
            OnBoardHumidity,
            EnvironmentalCh1,
            EnvironmentalCh2,
            EnvironmentalCh3,
            EnvironmentalCh4,
        }
        public static string TemperatureLogTimeFormat { get; set; } = "MM-dd-yyyy HH:mm:ss";
        public static string TemperatureLogValueFormat { get; set; } = "N2";
        public const int TSR_AIR_HIGH_G_CUTOFF_RATE_SPS = 500;
        /// <summary>
        /// 29796 Add ability to configure multiple samples rates for TSR AIR
        /// </summary>
        public static readonly int[] TSRAIR_ValidSampleRates = new[]
        {
            100,
            500,
            1000,
            5000,
            10000,
            15000,
            20000
        };

        /// <summary>
        /// Legacy SLICE 1 ARM status faults
        /// </summary>
        public enum FaultFlags
        {
            IncomingStatusLineDropped = 1 << 0,
            ADCBufferOverrun = 1 << 1,
            FlashCRCError = 1 << 2,
            TriggerBeforeStart = 1 << 3,
            InputVoltageLow = 1 << 4,
            InputVoltageHigh = 1 << 5,
            BackupVoltageLow = 1 << 6,
            BackupVoltageHigh = 1 << 7,
            OutOfMemory = 1 << 8,
            SquibResistanceOutOfRange = 1 << 9,
            SafeSwitchUnplugged = 1 << 10,
            SquibPowerOutOfRange = 1 << 11,
            AutoSquibDisableActivated = 1 << 12,
            NO_DATA = 1 << 13
        };
        /// <summary>
        /// possible excitation status for DAS
        /// </summary>
        public enum ExcitationStatus
        {
            Off,
            On,
            Unknown
        }
        public enum T0CorrectionStatus
        {
            ScanningForPowerLoss,
            ScanningForPeaksAndTroughs,
            SettingAttributes
        }
        /// <summary>
        /// Whether to use drop down for test object and position
        /// does not query database, so property must be set and maintained separately,
        /// this merely allows passing the information between modules
        /// 17567 Option to bring back Test Object and Position drop down in Test Set up -> Groups.
        /// </summary>
        public static bool UseDropDownForTestObjectAndPosition { get; set; } = false;
        /// <summary>
        /// whether to send EnableFaultChecking to S6DB or not
        /// </summary>
        public static bool AllowEnableFaultCheckingOnS6DB { get; set; } = true;
        /// <summary>
        /// returns true if the S6A firmware belongs to an ethernet recorder or not
        /// </summary>
        /// the amount of weight to add for a single channel when trying to predict the slowest module through diagnostics
        /// when the channel uses remove offset
        /// note that the time to remove offset can be highly dependent on the amount of offset present, etc
        /// implemented for 21200 Correct SlowestModule calculation for TDAS
        /// </summary>
        public static double TDASRemoveOffsetWeighting { get; set; } = 1D;
        /// <summary>
        /// amount of weight to add for a single channel when trying to predict the slowest module through diagnostics when
        /// the channel uses shunt emulation
        /// </summary>
        public static double TDASShuntEmulationWeighting { get; set; } = .5D;
        /// <summary>
        /// the expected amount of time in ms MAX for an individual channel in TDAS diagnostics
        /// </summary>
        public static int ExpectedMaxTDASDiagnosticRunTimePerChannelMS { get; set; } = 8000;
        /// <summary>
        /// returns true if the S6A firmware belongs to an ethernet recorder or not
        /// </summary>
        public static bool IsSLICE6ERFirmware(string firmwareVersion)
        {
            var tokens = firmwareVersion.Split('-');
            var token = tokens.Last();
            if (token.Length == 4)
            {
                //G1 and G3 are EDRs
                //http://dtsinfo/dtswiki/index.php/SLICE_Base_Types
                return token.StartsWith("G1") || token.StartsWith("G3");
            }
            return false;
        }
        public static bool UseUDPForAutoArmATDMonitor { get; set; } = false;
        public const byte ArmStateIdle = 0;
        public const string MADEUPEVENT_TESTID = "__MadeUp__";
        /// <summary>
        /// indicates that no configuration was found on the unit
        /// originally added as this was an error condition when checking for TOMs on TDAS
        /// </summary>
        public const string NO_CONFIGURATION = "NO_CONFIGURATION";
        /// <summary>
        /// indiciates that a tom safety switch is in the armed position
        /// </summary>
        public const string TOMSWITCH_ARMED = "TOMSAFETY_ARMED";
        /// <summary>
        /// indicates there was an exception and the tom safety switch state could not be determined
        /// </summary>
        public const string SAFETYSWITCH_EXCEPTION = "SAFETYSWITCH_EXCEPTION";
        public const string CHANNEL_SEPARATOR = "_";
        public const string SERIAL_SEPARATOR = "-";
        public const string LOWG_SERIAL_APPEND = "Low g";
        public const string HIGHG_SERIAL_APPEND = "High g";
        public const string ARS_SERIAL_APPEND = "ARS";
        public const string ANGACCEL_SERIAL_APPEND = "Ang Acc";
        public const string ATMOSPHERIC_SERIAL_APPEND = "Atm";
        public const string OPTICAL_SERIAL_APPEND = "Opt";
        public const string MAGNETIC_SERIAL_APPEND = "Mag";
        public const string MAGNETICSWITCH_SERIAL_APPEND = "Mag Sw";
        public const string MICROPHONE_SERIAL_APPEND = "Mic";
        public const string RTCSECONDANDMARKER_SERIAL_APPEND = "RTC S";
        public const string RTCCLOCKNANOPAD_SERIAL_APPEND = "RTC NS";
        public const string STREAMOUT_SERIAL_APPEND = "StreamOut";
        public const string UART_SERIAL_APPEND = "Uart";
        public const int CHANNEL_X = 0;
        public const int CHANNEL_Y = 1;
        public const int CHANNEL_Z = 2;
        public const int CHANNEL_TEMPERATURE = 0;
        public const int CHANNEL_HUMIDITY = 1;
        public const int CHANNEL_PRESSURE = 2;
        public const string USER_CHANNEL_NAME_LOWG = "Low g";
        public const string USER_CHANNEL_NAME_HIGHG = "High g";
        public const string USER_CHANNEL_NAME_ANGULAR_RATE = "Angular Rate";
        public const string USER_HARDWARE_NAME_ANGULAR_RATE = "ARS CH";
        public const string USER_CHANNEL_NAME_TEMPERATURE = "Temperature";
        public const string USER_HARDWARE_NAME_TEMPERATURE = "Atm CH-01";
        public const string USER_CHANNEL_NAME_HUMIDITY = "Humidity";
        public const string USER_HARDWARE_NAME_HUMIDITY = "Atm CH-02";
        public const string USER_HARDWARE_NAME_PRESSURE = "Atm CH-03";
        public const string USER_CHANNEL_NAME_PRESSURE = "Pressure";

        public static bool ExtraCommunicationLogging { get; set; } = false;
        /// <summary>
        /// ReceiveBufferSize in Bytes
        /// amount of bytes for Ethernet sockets in dasfactory
        /// 17589 Add new properties from 3.2 tweaks
        /// </summary>
        public static int ReceiveBufferSizeBytes { get; set; } = 65536;
        /// <summary>
        /// SendBufferSize in Bytes
        /// amount of bytes for Ethernet sockets in dasfactory
        /// 17589 Add new properties from 3.2 tweaks
        /// </summary>
        public static int SendBufferSizeBytes { get; set; } = 65536;

        /// <summary>
        /// keep alive time to send to remote clients for time between keep alives in seconds
        /// 16053 Implement KeepAliveSeconds and KeepAliveRetrySeconds in the .config file
        /// </summary>
        public static uint RemoteKeepAliveSeconds { get; set; } = 60;
        /// <summary>
        /// keep alive time to send to remote clients for time for retry interval in seconds
        /// 16053 Implement KeepAliveSeconds and KeepAliveRetrySeconds in the .config file
        /// </summary>
        public static uint RemoteKeepAliveRetryIntervalSeconds { get; set; } = 5;
        /// <summary>
        /// keep alive time to send to local sockets for time between keep alives in ms
        /// 16053 Implement KeepAliveSeconds and KeepAliveRetrySeconds in the .config file
        /// </summary>
        public static uint LocalKeepAliveTimeOutMS { get; set; } = 5 * 1000;
        /// <summary>
        /// keep alive time to set for local sockets for time for retry interval in ms
        /// 16053 Implement KeepAliveSeconds and KeepAliveRetrySeconds in the .config file
        /// </summary>
        public static uint LocalKeepAliveRetryIntervalMS = 1000;

        public static int HeartbeatAsyncConnectTimeoutMS = 10000;

        public static int WaitTimeBetweenUnitConnects = 100;
        //15873 TDC vs DP speed improvements
        //this is just to allow us to skip an SDL during the diagnostics process
        public static bool DontDoSDL { get; set; } = false;
        public const int SCHEDULE_AHEAD_IN_MINUTES = 2;
        public const int TIME_TO_REARM_SECONDS = 30;

        //FB 29510 Index for High g sensors
        public const int High_g_Linear_1_Index = 3;
        public const int High_g_Linear_2_Index = 4;
        public const int High_g_Linear_3_Index = 5;

        /// <summary>
        /// This tells us what type of device it is
        /// </summary>
        public enum DASType
        {
            NONE,
            HID_SLICE,
            WINUSB_SLICE,
            G5,
            SIM,
            TOM,
            DIM,
            TSR,
            HEADS,
            MINIDAU,
            ETHERNET_SLICE,
            ETHERNET_RIBEYE,
            SLICE_DB,
            TSR2,
            ETHERNET_TDAS,
            CDCUSB_SLICE,
            ETHERNET_SLICE2,
            WINUSB_SLICE1_5,
            ETHERNET_SLICE1_5,
            ETHERNET_SLICE6,
            ETHERNET_SLICE6AIR,
            WINUSB_SLICE6,
            WINUSB_SLICE6AIR,
            ETHERNET_SLICE6DB,
            SERIAL_TDAS,
            ETHERNET_POWERPRO,
            ETHERNET_TSR_AIR,
            ETHERNET_SLICE6DB3,
            WINUSB_TSR_AIR,
            ETHERNET_SLICEPRODB,
            WINUSB_SLICE6AIR_BR,
            WINUSB_SLICE6AIR_TC,
            ETHERNET_SLICE6AIR_BR,
            ETHERNET_SLICE6AIR_TC,
            REST_SPFD
        }

        public enum VoltageStatusColor
        {
            Green,
            Red,
            Yellow,
            Off
        }

        public const int EVENT_NUMBER_PRETEST_DIAG = -1;
        public const int EVENT_NUMBER_POSTTEST_DIAG = -2;
        public const int EVENT_NUMBER_MEASURE_BRIDGE = -3;
        public static string RealtimeUDPAddress { get; set; } = "UDP://239.1.2.10:8400";


        /// <summary>
        /// The different types of modules.
        /// </summary>
        public enum ModuleType
        {
            SliceBridge,
            SliceARS,
            G5Analog,
            G5Digital,
            ProSIM,
            ProTOM,
            ProDIM,
            RibeyeLED,
            SLICEIEPE,
            SliceBridge2High,
            SliceBridge2Low,
            SliceIEPE2High,
            SliceIEPE2Low,
            EMPTYBANK,
            SLICEPro_TOM,
            EmbeddedLinearAccelLowG,
            EmbeddedLinearAccelHighG,
            EmbeddedAngularAccel,
            EmbeddedAngularRate,
            EmbeddedAtmospheric,
            EmbeddedMicrophone,
            EmbeddedMagnetometer,
            EmbeddedMagnetInput,
            EmbeddedOptical,
            EmbeddedClockSecondsAndMarker,
            EmbeddedClockNanosAndPad,
            UART,
            StreamOut,
            StreamIn,
            Thermocoupler
        }

        /// <summary>
        /// All available recording mode options.
        /// </summary>
        public enum RecordingMode
        {
            /// <summary>
            /// invalid mode, this can't be used
            /// </summary>
            [Description("Invalid arm mode")] InvalidArmMode = 0,

            /// <summary>
            /// circular buffer mode (constant recording, trigger)
            /// </summary>
            [Description("Circular buffer")] CircularBuffer = 1,

            /// <summary>
            /// recorder mode (start, trigger)
            /// </summary>
            [Description("Recorder mode")] RecorderMode = 2,

            /// <summary>
            /// contant recording, trigger, rearm after data collected
            /// </summary>
            [Description("Circular buffer multiple-events")]
            AutoCircularBufferMode = 4,

            /// <summary>
            /// recorder mode (start, trigger) rearm after data collected
            /// </summary>
            [Description("Recorder mode multiple-events")]
            AutoRecorderMode = 5,

            /// <summary>
            /// ???
            /// </summary>
            [Description("Immediate mode")] ImmediateMode = 0x06,

            /// <summary>
            /// ???
            /// </summary>
            [Description("High Power mode")] HighPowerRecorderMode = 0x07,

            /// <summary>
            /// ???
            /// </summary>
            [Description("Low Power mode")] LowPowerRecorderMode = 0x08,

            /// <summary>
            /// ???
            /// </summary>
            [Description("Continuous mode")] ContinuousRecorderMode = 0x09,

            /// <summary>
            /// ???
            /// </summary>
            [Description("Hybrid mode")] HybridRecorderMode = 0x0A,

            /// <summary>
            /// ???
            /// </summary>
            [Description("Hybrid mode Multiple-Events")]
            MultiHybridRecorderMode = 0x0B,

            [Description("Active RAM")]
            RAMActive = 0x0C,  // slice6 only. Circular buffer in 32-KB Ram until trigger occur.
            [Description("Active RAM Multiple-Events")]
            MultipleEventRAMActive = 0x0D, // multiple event mode

            /// <summary>
            /// added S6A FM G0K9 (protocol 29)
            /// 18090 Implement chapter 10 streaming while recording (in DTS format)
            /// </summary>
            [Description("Recorder and stream subsample")]
            a14_NormalRecorderAndStreamSubSampleMode = 0x0E,        // S6A. Record and streaming realtime out to IRIG IP address.
            [Description("Multiple event recorder and stream")]
            a15_MultiRecorderAndStreamSubSampleMode = 0x0F,         // S6A. Record and streaming realtime out to IRIG IP address.
            /// <summary>
            /// added S6A FM G0K9 (protocol 29)
            /// 18090 Implement chapter 10 streaming while recording (in DTS format)
            /// </summary>
            [Description("Circular buffer and stream subsample")]
            a16_CircularBufferAndStreamSubSampleMode = 0x10,        // S6A. Record and streaming realtime out to IRIG IP address.
            [Description("Multiple event circular buffer and stream")]
            a17_MultiCircularBufferAndStreamSubSampleMode = 0x11,   // S6A. Record and streaming realtime out to IRIG IP address.
            [Description("Hybrid recorder and stream")]
            a18_HybridRecorderAndStreamSubSampleMode = 0x12,        // S6A. Record and streaming realtime out to IRIG IP address.
            [Description("Multiple event hybrid and stream")]
            a19_MultiHybridRecorderAndStreamSubSampleMode = 0x13,   // S6A. Record and streaming realtime out to IRIG IP address.
            /// <summary>
            /// ???
            /// </summary>
            [Description("Streaming")] S6A_DeviceStreamingOnly = 0x14,

            /// <summary>
            /// circular buffer mode (constant recording, trigger) + UART recording
            /// </summary>
            [Description("Circular buffer + UART")] CircularBufferPlusUART = 0x15,

            /// <summary>
            /// recorder mode (start, trigger) + UART recording
            /// </summary>
            [Description("Recorder mode + UART")] RecorderModePlusUART = 0x16,

            /* these display modes don't show up in the UI, they are just internal to the OBR-DDR*/
            EthernetUDPRecordingCircularMode = 0x17,
            EthernetUDPRecordingRecorderMode = 0x18,
            MultiEthernetUDPRecordingCircularMode = 0x19,
            MultiEthernetUDPRecordingRecorderMode = 0x1A,
            EthernetHybridRecorderMode = 0x1B,
            MultiEthernetHybridRecorderMode = 0x1C,

            //The following are for TSR AIR only
            [Description("Aerospace mode")]
            Aerospace = 0x1D,
            /// <summary>
            /// active mode (start, trigger)
            /// not sure why this is duplicated here [AutoActiveMode = AeroSpace] but both have the same value
            /// I'll just preserve it for now since I want to avoid any side effects
            /// </summary>
            [Description("Active mode")] AutoActiveMode = Aerospace, // 0x1D,
            [Description("AerospaceWithMotion mode")]
            AerospaceWithMotion = 0x1E,
            [Description("MultipleEventRecorderTriggerStart")]
            MultipleEventRecorderTriggerStart = 0x1F,
            [Description("Scheduled mode")]
            Scheduled = 0x20,
            [Description("Interval mode")]
            Interval = 0x21,
            [Description("Streaming mode")]
            Streaming = 0x22,
            //The preceding are for TSR AIR only

            // Multiple Event + UART
            [Description("Circular buffer + UART, multiple events")]
            AutoCircularBufferPlusUART = 0x23,
            [Description("Recorder mode + UART, multiple events")]
            AutoRecorderModePlusUART = 0x24,
            [Description("Continuous mode + UART, multiple events")]
            ContinuousRecorderModePlusUART = 0x25,
            [Description("Record on boot, multiple events")]
            a26_MultiRecordOnBootDataMode = 0x26,
            [Description("Record on boot + UART, multiple events")]
            a28_MultiRecordOnBootAndUartDataMode = 0x28,
        }

        /// <summary>
        /// All available 3 Axis assignments for the Slice 6 Bubble level tilt feature.
        /// </summary>
        public enum TiltAxes
        {
            [Description("+X+Y+Z")] XYZ = 0,
            [Description("+X+Z+Y")] XZY = 1,
            [Description("+Y+X+Z")] YXZ = 2,
            [Description("+Y+Z+X")] YZX = 3,
            [Description("+Z+X+Y")] ZXY = 4,
            [Description("+Z+Y+X")] ZYX = 5,
            [Description("+X+Y-Z")] XYIZ = 6,
            [Description("+X+Z-Y")] XZIY = 7,
            [Description("+Y+X-Z")] YXIZ = 8,
            [Description("+Y+Z-X")] YZIX = 9,
            [Description("+Z+X-Y")] ZXIY = 10,
            [Description("+Z+Y-X")] ZYIX = 11,
            [Description("+X-Y+Z")] XIYZ = 12,
            [Description("+X-Z+Y")] XIZY = 13,
            [Description("+Y-X+Z")] YIXZ = 14,
            [Description("+Y-Z+X")] YIZX = 15,
            [Description("+Z-X+Y")] ZIXY = 16,
            [Description("+Z-Y+X")] ZIYX = 17,
            [Description("+X-Y-Z")] XIYIZ = 18,
            [Description("+X-Z-Y")] XIZIY = 19,
            [Description("+Y-X-Z")] YIXIZ = 20,
            [Description("+Y-Z-X")] YIZIX = 21,
            [Description("+Z-X-Y")] ZIXIY = 22,
            [Description("+Z-Y-X")] ZIYIX = 23,
            [Description("-X+Y+Z")] IXYZ = 24,
            [Description("-X+Z+Y")] IXZY = 25,
            [Description("-Y+X+Z")] IYXZ = 26,
            [Description("-Y+Z+X")] IYZX = 27,
            [Description("-Z+X+Y")] IZXY = 28,
            [Description("-Z+Y+X")] IZYX = 29,
            [Description("-X+Y-Z")] IXYIZ = 30,
            [Description("-X+Z-Y")] IXZIY = 31,
            [Description("-Y+X-Z")] IYXIZ = 32,
            [Description("-Y+Z-X")] IYZIX = 33,
            [Description("-Z+X-Y")] IZXIY = 34,
            [Description("-Z+Y-X")] IZYIX = 35,
            [Description("-X-Y+Z")] IXIYZ = 36,
            [Description("-X-Z+Y")] IXIZY = 37,
            [Description("-Y-X+Z")] IYIXZ = 38,
            [Description("-Y-Z+X")] IYIZX = 39,
            [Description("-Z-X+Y")] IZIXY = 40,
            [Description("-Z-Y+X")] IZIYX = 41,
            [Description("-X-Y-Z")] IXIYIZ = 42,
            [Description("-X-Z-Y")] IXIZIY = 43,
            [Description("-Y-X-Z")] IYIXIZ = 44,
            [Description("-Y-Z-X")] IYIZIX = 45,
            [Description("-Z-X-Y")] IZIXIY = 46,
            [Description("-Z-Y-X")] IZIYIX = 47
        }
        /// <summary>
        /// When the DAS unit arms each channel will be handled based on this mode.
        /// </summary>
        public enum ConfigMode
        {
            /// <summary>
            /// This channel is not part of Data Acquisition in this test.
            /// </summary>
            Disabled,

            /// <summary>
            /// Channel is part of current test/event and it's input WILL be sampled on recording.
            /// </summary>
            Normal,

            /// <summary>
            /// This channel is only used for 'Dummy' arming and recording and should not be downloaded.
            /// </summary>
            DummyArm,

            /// <summary>
            /// This channel is only used for clock recording and should not be downloaded to normal .chn files.
            /// </summary>
            Clock,

            /// <summary>
            /// This channel is only used for UART recording and should not be downloaded to normal .chn files.
            /// </summary>
            UART,

            /// <summary>
            /// This channel is only used for streaming out and should not be downloaded to normal .chn files.
            /// </summary>
            StreamOut,

            /// <summary>
            /// This channel is only used for streaming in and should not be downloaded to normal .chn files.
            /// </summary>
            StreamIn,
        }
        /// <summary>
        /// Determines known device type from udp response
        /// This is a bitwise device list that is hardcoded on the fw side and part of the UDP brodcast response back to the host
        /// 
        /// NextOne is reserved for the next device type
        /// </summary>
        public enum MultiCastDeviceClasses
        {
            Unknown = 0,
            Slice6 = 1 << 0,
            SDB = 1 << 1,
            ECM = 1 << 2,
            S6DB = 1 << 3,
            Slice6Air = 1 << 4,
            PowerPro = 1 << 5,
            TsrAir = 1 << 6,
            S6DB3 = 1 << 7,
            S6FALCON = 1 << 8,
            SPDB = 1 << 9,
            SPFD = 1 << 10,
            SliceTC = 1 << 11,

            NextOne = 1 << 12,
            Any = 0xFFFF,
        };
        public enum ProtocolLimitedCommands
        {
            DiangosShuntDAC,
            QueryMSP430Firmware,
            MultipleAndHybridEvents,
            AutoArm,
            FlashCardInfo,
            Arm,
            OnOverride,
            EnableFaultChecking,
            OMAP_GPIO,
            VoltageInsertion,
            SetDefaultMIF,
            StackFirmwareUpdate,
            FileData,
            StackSensors,
            BaseSystemTime,
            PhysicalStartAddress,
            TestCommunication,
            StackLowPowerMode,
            StackChannelTypeConfiguration,
            SetRealtimeSampleRate,
            SLICE2_OneWireID,
            QueryBatteryVoltage,
            HardwareRevision,
            HardwareConfiguration,
            ProgramStackChannels,
            EventFaultFlags,
            EventArmAttempts,
            QueryActualSampleRateImmediate,
            InitHardwareInputLines,
            VoltageSysAttributes,
            DiagnosticTwoVoltExcitation,
            ExcitationLevel,
            MultipleEvents,
            LevelTrigger,
            Diagnostics,
            AttributeStoreBlocks,
            QueryArmAndTriggerStatus_VoltageReadings,
            MaxEvents,
            AutoArmDiagnosticDelay,
            StackChannelAutoArmDiagLevel,
            FlashClear,
            DiagnosticsMode,
            MultipleSamplesRealtime,
            ResetAttributeStore,
            IgnoreShortedStartEvent,
            BaseCalibrationDate,
            PTPTimestamp,
            QueryArmAndTriggerStatus_TimeLeftInArm,
            MeasureInternalOffset,
            MeasureInternalOffsetSwitches,
            QueryBatterySOC,
            StartRecDelayInSecond,
            QueryTiltSensorData,
            InSliceTiltSensorADCPre,
            MeasureBaseDiagnosticChannel,
            InSliceTemperatureCPre,
            StartRealtimeStream,
            HalfBridgeSigPlusSupport,
            DownloadStreaming,
            IEPE,
            QueryEthernetMacTable,
            QueryClockSyncStatus,
            SetClockSyncConfig,
            UDPRealtimeStream,
            QueryUARTDownload,
            GetUARTSettings,
            SetUARTSettings,
            AutoArmRepeatEnable,
            MeasurePowerProAllDiagnosticChannel,
            SetDSPFilterSettings,
            PTPSyncStatus,
            QueryTempLogFile,
            QueryExternalTiltInfo,
            QueryStackActualSampleRateImmediate,
            RecordAndStreamSubSample,
            //17583 Monitor Test UI
            AutoArmUDPSetting,
            //18294 Implement Bridge AC/DC coupling (fw update dependent)
            StackChannelBridgeACCouplerEnable,
            GenerateEvent,
            MaxEventsPossible,
            AdcClockSource,
            SliceBusEnabled,
            QATSCurrentAndMaxSample,
            DBTiltSensor,
            RemoveLeapSeconds,
            ADCSamplesPerPacket,
            MultipleConfigurations,
            DisableStreamingFeature,
            //30513 PTP Domain ID
            PTPDomainID,
            ActiveRAM,
            RecordOnBoot,
            AutoArmRecordDelay,
            ExtendedFaultIds,
            UDPAlignOnPPS,
            ScheduledEventCount,
            UDPAddressList,

        }
        /// <summary>
        /// possible command status
        /// this appears to be common across all commands
        /// </summary>
        public enum CommandStatus
        {
#pragma warning disable 1591 //disable xml warnings for all the enum values
            StatusNoError = 0x00,
            StatusInvalidParameter,
            StatusInvalidParameterLength,
            StatusInvalidCommandType,
            StatusInvalidCommand,
            StatusInvalidCRC,
            StatusInvalidModeForCommand,
            StatusUnimplemented,
            StatusInvalidReceivedHeaderCRC,
            StatusInvalidIDForCommand,
            StatusInvalidPacket,
            StatusPacketNotAvailableToReceive,
            StatusPacketNotAvailableToSend,

            StatusFlashEraseError = 0x10,
            StatusFlashWriteError,
            StatusFlashInvalidBlockCRC,
            StatusFlashInvalidImageCRC,

            StatusAttributeInvalidNumber = 0x20,
            StatusAttributeSetError,
            StatusAttributeBackupSetError,
            StatusAttributeInvalidBuffer,
            StatusAttributeNotRegistered,
            StatusAttributeRegisteredCannotOverwrite,
            StatusAttributeReadError,
            StatusAttributeBackupReadError,
            StatusAttributeInvalidLength,
            StatusAttributeTypeMismatch,
            StatusAttributeTypeNotInternallyImplemented = 0x2A,
            StatusAttributeOnboardFlashWriteFailed = 0x2B,
            StatusAttributeInvalidValue = 0x2C,

            StatusArmInvalidSampleRate = 0x30,
            StatusArmInvalidEventLength = 0x31,
            StatusArmInvalidArmMode = 0x32,
            StatusArmUnimplementedArmMode = 0x33,
            StatusArmEventNumberTooLarge = 0x34,
            StatusArmMemoryFull = 0x35,
            StatusArmInvalidSliceCount = 0x36,
            StatusArmShortedStartRecordInput = 0x37,
            StatusArmShortedTriggerInput = 0x38,
            StatusArmInvalidPretriggerSamplesRequested = 0x39,
            StatusArmShortedStartAndTrigger = 0x3A,
            StatusArmEventUncompleted = 0x3B, /** Event completed without end block. Must be interrupted! **/
            StatusArmSafeSwitchUnplugged = 0x3C, /** stop arming if safety switch is not connected. **/
            StatusArmSquibResistanceFault = 0x3D, /** stop if resistance check fails . **/
            StatusArmHardwareFault = 0x3F,

            StatusSDUnableToStartMultipleBlockWrite = 0x40,
            StatusSDUnableToFlushWriteBlock,
            StatusSDUnableToStartMultipleBlockRead,
            StatusSDUnexpectedAmountOfDataReadOrWritten,
            StatusSDUnableToResetCard,
            StatusSDBlockWriteCRCError = 0x45, /** The card reported a CRC error on a block write */
            StatusSDWriteTimeout = 0x46,
            StatusSDReadTimeout = 0x47,

            StatusSwitchNumberInvalid = 0x50,
            StatusSwitchSettingInvalid = 0x51,
            StatusSwitchChannelInvalid = 0x52,

            StatusDownloadFirstSampleGreaterThanLastSample = 0x60,
            StatusFirstSampleGreaterThanTotalSamples,
            StatusDownloadEventHasNoSamples,
            StatusDownloadInvalidChannelRequested,
            StatusDownloadInvalidEventRequested,

            StatusMemoryNullPointerError = 0x70,

            StatusTestRecorderFull = 0x80,
            StatusTestRecorderEmpty,

            StatusSPIInvalidMode = 0x90,
            StatusSPIInvalidModeForWrite,

            StatusSlicebusInvalidHeaderCRC = 0xA0,
            StatusSlicebusInvalidDataCRC,
            StatusSlicebusNullDescriptor,
            StatusSlicebusNotImplemented,
            StatusSlicebusNoResponse,
            StatusSlicebusNullCommandBuffer,
            StatusSlicebusCommandBufferTooShort,

            StatusSetupRequestedSensorRangeTooSmall = 0xB0,
            StatusSetupInvalidStackChannel,
            StatusSetupInvalidChannelRequested,
            StatusSetupInconsistentChannelCountFound,
            StatusSetupNoShuntTargetsSet,
            StatusSetupNoBridgeResistancesSet,
            StatusSetupChannelDoesNotSupportShunt,
            StatusSetupShuntDACOutputExceeded,
            StatusSetupRequestedSensorRangeTooLarge,
            StatusSetupInvalidExciteLevel = 0xB9,
            StatusSetupI2CWriteFail = 0xBA,
            StatusSetupI2CReadFail = 0xBB,

            StatusSetupCALDACOutputExceeded = 0xC0,
            StatusNoResponse,
            STATUS_SLICE_FIRMWARE_WRITE_FAILED = 0xC6,
            STATUS_SLICE_FIRMWARE_WRITE_IMAGE_BAD_FLASH_CFG = 0xC7,
#pragma warning restore 1591
        };
        /// <summary>
        /// max amount of time to wait for UDP thread to rejoin
        /// </summary>
        public static int UDP_RECEIVE_TIMEOUT = 10000;
        /// <summary>
        /// this error code indicates that a socket is not connected
        /// 15575 No notification if unplug comm cable during downloading on G5
        /// https://docs.microsoft.com/en-us/windows/win32/winsock/windows-sockets-error-codes-2
        /// </summary>
        public const int WSAEISCONN = 0X2748;
        /// <summary>
        /// this value signifies an uninitialized date time [date time not set] as opposed to an invalid date time
        /// [feature not supported]
        /// 15524 DAS "First Use Date"
        /// </summary>
        public static readonly DateTime FIRST_USE_DATE_NOT_SET = (DateTime)System.Data.SqlTypes.SqlDateTime.MinValue;
    }

    public static class RecordingModeExtensions
    {
        /// <summary>
        /// returns true if recording mode is an "Active" recording mode
        /// </summary>
        public static bool IsAnActiveMode(RecordingModes mode)
        {
            switch (mode)
            {
                case RecordingModes.Active:
                case RecordingModes.MultipleEventActive:
                    return true;
            }
            return false;
        }
        public static bool UsesTestLength(RecordingModes mode)
        {
            return CanProgramPostTrigger(mode) && !CanProgramPreTrigger(mode);
        }
        /// <summary>
        /// returns true if the recording mode is only for TSR AIR
        /// </summary>
        /// <param name="mode"></param>
        /// <returns></returns>
        public static bool IsTSRAIROnlyRecordingMode(RecordingModes mode)
        {
            switch (mode)
            {
                case RecordingModes.Active:
                case RecordingModes.MultipleEventActive:
                case RecordingModes.Scheduled:
                case RecordingModes.Interval:
                    return true;
            }
            return false;
        }
        /// <summary>
        /// returns true if the recording mode is allowed on a TSR AIR
        /// </summary>
        public static bool IsTSRAirRecordingMode(RecordingModes mode)
        {
            switch (mode)
            {
                case RecordingModes.Active:
                case RecordingModes.MultipleEventActive:
                case RecordingModes.Scheduled:
                case RecordingModes.Interval:
                case RecordingModes.Streaming:
                    return true;
                default:
                    return false;
            }
        }
        public static bool SupportsT0Correction(DFConstantsAndEnums.RecordingMode recordingMode)
        {
            if (IsACircularBufferMode(recordingMode)) { return true; }
            if (IsAHybridRecorderMode(recordingMode)) { return true; }
            return false;
        }
        private static readonly IReadOnlyDictionary<DFConstantsAndEnums.RecordingMode, RecordingModes> _altToLookup =
            new Dictionary<DFConstantsAndEnums.RecordingMode, RecordingModes>()
            {
                {DFConstantsAndEnums.RecordingMode.MultiHybridRecorderMode, RecordingModes.MultipleEventHybridRecorder },
                {DFConstantsAndEnums.RecordingMode.AutoRecorderMode,  RecordingModes.MultipleEventRecorder},
                {DFConstantsAndEnums.RecordingMode.Interval, RecordingModes.Interval},
                {DFConstantsAndEnums.RecordingMode.AutoCircularBufferMode, RecordingModes.MultipleEventCircularBuffer},
                {DFConstantsAndEnums.RecordingMode.AutoActiveMode, RecordingModes.MultipleEventActive}
            };
        private static readonly IReadOnlyDictionary<DFConstantsAndEnums.RecordingMode, RecordingModes> _toLookup =
            new Dictionary<DFConstantsAndEnums.RecordingMode, RecordingModes>()
            {
                { DFConstantsAndEnums.RecordingMode.CircularBuffer, RecordingModes.CircularBuffer },
                { DFConstantsAndEnums.RecordingMode.a16_CircularBufferAndStreamSubSampleMode,  RecordingModes.CircularBufferAndStreamSubSample},
                { DFConstantsAndEnums.RecordingMode.CircularBufferPlusUART,  RecordingModes.CircularBufferPlusUART},
                { DFConstantsAndEnums.RecordingMode.RecorderMode, RecordingModes.Recorder},
                { DFConstantsAndEnums.RecordingMode.RecorderModePlusUART, RecordingModes.RecorderPlusUART},
                { DFConstantsAndEnums.RecordingMode.ContinuousRecorderMode, RecordingModes.ContinuousRecorder},
                { DFConstantsAndEnums.RecordingMode.AutoCircularBufferMode, RecordingModes.CircularBuffer},
                { DFConstantsAndEnums.RecordingMode.AutoRecorderMode, RecordingModes.Recorder},
                { DFConstantsAndEnums.RecordingMode.MultiHybridRecorderMode, RecordingModes.HybridRecorder},
                { DFConstantsAndEnums.RecordingMode.S6A_DeviceStreamingOnly, RecordingModes.S6A_DeviceStreamingOnly},
                { DFConstantsAndEnums.RecordingMode.a14_NormalRecorderAndStreamSubSampleMode, RecordingModes.RecorderAndStreamSubSample},
                { DFConstantsAndEnums.RecordingMode.AutoActiveMode, RecordingModes.Active},
                { DFConstantsAndEnums.RecordingMode.Streaming, RecordingModes.Streaming},
                { DFConstantsAndEnums.RecordingMode.Scheduled, RecordingModes.Scheduled},
                { DFConstantsAndEnums.RecordingMode.Interval, RecordingModes.Scheduled},
                { DFConstantsAndEnums.RecordingMode.MultipleEventRecorderTriggerStart, RecordingModes.Active},
                { DFConstantsAndEnums.RecordingMode.AerospaceWithMotion, RecordingModes.MultipleEventActive },
                { DFConstantsAndEnums.RecordingMode.HybridRecorderMode, RecordingModes.HybridRecorder },
                { DFConstantsAndEnums.RecordingMode.AutoCircularBufferPlusUART, RecordingModes.MultipleEventCircularBufferPlusUART },
                { DFConstantsAndEnums.RecordingMode.AutoRecorderModePlusUART, RecordingModes.MultipleEventRecorderPlusUART },
                { DFConstantsAndEnums.RecordingMode.ContinuousRecorderModePlusUART, RecordingModes.ContinuousRecorderPlusUART },
                { DFConstantsAndEnums.RecordingMode.RAMActive, RecordingModes.RAMActive },
                { DFConstantsAndEnums.RecordingMode.MultipleEventRAMActive, RecordingModes.MultipleEventRAMActive },
                { DFConstantsAndEnums.RecordingMode.a26_MultiRecordOnBootDataMode, RecordingModes.RecordOnBoot },
                { DFConstantsAndEnums.RecordingMode.a28_MultiRecordOnBootAndUartDataMode, RecordingModes.RecordOnBootPlusUART },
                { DFConstantsAndEnums.RecordingMode.a18_HybridRecorderAndStreamSubSampleMode, RecordingModes.HybridAndStream },
                { DFConstantsAndEnums.RecordingMode.a19_MultiHybridRecorderAndStreamSubSampleMode, RecordingModes.MultipleEventHybridAndStream },
                { DFConstantsAndEnums.RecordingMode.a15_MultiRecorderAndStreamSubSampleMode, RecordingModes.MultipleEventRecorderAndStream },
                { DFConstantsAndEnums.RecordingMode.a17_MultiCircularBufferAndStreamSubSampleMode, RecordingModes.MultipleEventCircularBufferAndStream }
            };
        /// <summary>
        /// map from DFConstantAndEnums.RecordingMode to RecordingModes
        /// This was an alternate form of mapping found in quick build ...
        /// </summary>
        /// <param name="mode"></param>
        /// <returns></returns>
        public static RecordingModes ToRecordingModesAlt(DFConstantsAndEnums.RecordingMode mode)
        {
            return _altToLookup.ContainsKey(mode) ? _altToLookup[mode] : ToRecordingModes(mode);
        }
        public static RecordingModes ToRecordingModes(DFConstantsAndEnums.RecordingMode recordingMode)
        {
            return _toLookup.ContainsKey(recordingMode) ? _toLookup[recordingMode] : RecordingModes.CircularBuffer;
        }

        private static readonly IReadOnlyDictionary<RecordingModes, DFConstantsAndEnums.RecordingMode> _fromLookup =
            new Dictionary<RecordingModes, DFConstantsAndEnums.RecordingMode>()
            {
                { RecordingModes.CircularBuffer, DFConstantsAndEnums.RecordingMode.CircularBuffer},
                { RecordingModes.CircularBufferAndStreamSubSample, DFConstantsAndEnums.RecordingMode.a16_CircularBufferAndStreamSubSampleMode},
                { RecordingModes.CircularBufferPlusUART, DFConstantsAndEnums.RecordingMode.CircularBufferPlusUART},
                { RecordingModes.Recorder, DFConstantsAndEnums.RecordingMode.RecorderMode},
                { RecordingModes.RecorderPlusUART, DFConstantsAndEnums.RecordingMode.RecorderModePlusUART},
                { RecordingModes.HybridRecorder, DFConstantsAndEnums.RecordingMode.HybridRecorderMode},
                { RecordingModes.ContinuousRecorder, DFConstantsAndEnums.RecordingMode.ContinuousRecorderMode},
                { RecordingModes.ContinuousRecorderPlusUART, DFConstantsAndEnums.RecordingMode.ContinuousRecorderModePlusUART},
                { RecordingModes.MultipleEventCircularBuffer, DFConstantsAndEnums.RecordingMode.AutoCircularBufferMode},
                { RecordingModes.MultipleEventCircularBufferPlusUART, DFConstantsAndEnums.RecordingMode.AutoCircularBufferPlusUART},
                { RecordingModes.MultipleEventRecorder, DFConstantsAndEnums.RecordingMode.AutoRecorderMode},
                { RecordingModes.MultipleEventRecorderPlusUART, DFConstantsAndEnums.RecordingMode.AutoRecorderModePlusUART},
                { RecordingModes.MultipleEventHybridRecorder, DFConstantsAndEnums.RecordingMode.MultiHybridRecorderMode},
                { RecordingModes.S6A_DeviceStreamingOnly, DFConstantsAndEnums.RecordingMode.S6A_DeviceStreamingOnly},
                { RecordingModes.RecorderAndStreamSubSample, DFConstantsAndEnums.RecordingMode.a14_NormalRecorderAndStreamSubSampleMode},
                { RecordingModes.MultipleEventActive, DFConstantsAndEnums.RecordingMode.AutoActiveMode},
                { RecordingModes.Streaming, DFConstantsAndEnums.RecordingMode.Streaming},
                { RecordingModes.Scheduled, DFConstantsAndEnums.RecordingMode.Scheduled},
                { RecordingModes.Interval, DFConstantsAndEnums.RecordingMode.Interval},
                { RecordingModes.RAMActive, DFConstantsAndEnums.RecordingMode.RAMActive },
                { RecordingModes.MultipleEventRAMActive, DFConstantsAndEnums.RecordingMode.MultipleEventRAMActive },
                { RecordingModes.RecordOnBoot, DFConstantsAndEnums.RecordingMode.a26_MultiRecordOnBootDataMode },
                { RecordingModes.RecordOnBootPlusUART, DFConstantsAndEnums.RecordingMode.a28_MultiRecordOnBootAndUartDataMode },
                { RecordingModes.HybridAndStream, DFConstantsAndEnums.RecordingMode.a18_HybridRecorderAndStreamSubSampleMode },
                { RecordingModes.MultipleEventHybridAndStream, DFConstantsAndEnums.RecordingMode.a19_MultiHybridRecorderAndStreamSubSampleMode },
                { RecordingModes.MultipleEventCircularBufferAndStream, DFConstantsAndEnums.RecordingMode.a17_MultiCircularBufferAndStreamSubSampleMode },
                { RecordingModes.MultipleEventRecorderAndStream, DFConstantsAndEnums.RecordingMode.a15_MultiRecorderAndStreamSubSampleMode },

            };

        public static DFConstantsAndEnums.RecordingMode FromRecordingModes(
            this RecordingModes recordingMode)
        {
            return _fromLookup.ContainsKey(recordingMode) ? _fromLookup[recordingMode] : DFConstantsAndEnums.RecordingMode.CircularBuffer;
        }


        private static readonly HashSet<DFConstantsAndEnums.RecordingMode> _circularBufferModes = new HashSet<DFConstantsAndEnums.RecordingMode>()
        {
            DFConstantsAndEnums.RecordingMode.a16_CircularBufferAndStreamSubSampleMode,
            DFConstantsAndEnums.RecordingMode.AutoCircularBufferMode,
            DFConstantsAndEnums.RecordingMode.CircularBuffer,
            DFConstantsAndEnums.RecordingMode.CircularBufferPlusUART,
            DFConstantsAndEnums.RecordingMode.AutoCircularBufferPlusUART,
            DFConstantsAndEnums.RecordingMode.AerospaceWithMotion,
            DFConstantsAndEnums.RecordingMode.AutoActiveMode,
            DFConstantsAndEnums.RecordingMode.RAMActive,
            DFConstantsAndEnums.RecordingMode.MultipleEventRAMActive,
            DFConstantsAndEnums.RecordingMode.a17_MultiCircularBufferAndStreamSubSampleMode
        };

        /// <summary>
        /// returns true if mode is a circular buffer mode
        /// </summary>
        /// <param name="mode"></param>
        /// <returns></returns>
        public static bool IsACircularBufferMode(DFConstantsAndEnums.RecordingMode mode)
        {
            return _circularBufferModes.Contains(mode);
        }
        private static readonly HashSet<RecordingModes> _nonAutoArmModes = new HashSet<RecordingModes>()
        {
            RecordingModes.Active,
            RecordingModes.MultipleEventActive,
            RecordingModes.Scheduled,
            RecordingModes.Interval,
            RecordingModes.Streaming //Not really needed since Auto-Arm and Streaming checkboxes are mutually exclusive
        };
        /// <summary>
        /// returns true if recording mode supports AutoArm, false otherwise
        /// </summary>
        /// <param name="mode">recording mode to check</param>
        /// <returns>true if mode can be used with auto-arm</returns>
        public static bool DoesModeSupportAutoArm(RecordingModes mode)
        {
            return !_nonAutoArmModes.Contains(mode);
        }

        /// <summary>
        /// returns true if mode is a circular buffer mode
        /// </summary>
        /// <param name="mode"></param>
        /// <returns></returns>
        public static bool IsACircularBufferMode(RecordingModes mode)
        {
            return IsACircularBufferMode(FromRecordingModes(mode));
        }
        private static readonly HashSet<DFConstantsAndEnums.RecordingMode> _recorderModes = new HashSet<DFConstantsAndEnums.RecordingMode>()
        {
            DFConstantsAndEnums.RecordingMode.a14_NormalRecorderAndStreamSubSampleMode,
            DFConstantsAndEnums.RecordingMode.AutoRecorderMode,
            DFConstantsAndEnums.RecordingMode.RecorderMode,
            DFConstantsAndEnums.RecordingMode.RecorderModePlusUART,
            DFConstantsAndEnums.RecordingMode.AutoRecorderModePlusUART
        };
        /// <summary>
        /// returns true if the mode is a recorder mode
        /// </summary>
        /// <param name="mode"></param>
        /// <returns></returns>
        public static bool IsARecorderMode(DFConstantsAndEnums.RecordingMode mode)
        {
            return _recorderModes.Contains(mode);
        }
        /// <summary>
        /// returns true if mode is a recorder mode
        /// </summary>
        /// <param name="mode"></param>
        /// <returns></returns>
        public static bool IsARecorderMode(RecordingModes mode)
        {
            return IsARecorderMode(FromRecordingModes(mode));
        }
        /// <summary>
        /// returns true if the mode is a hybrid recorder mode
        /// </summary>
        /// <param name="mode"></param>
        /// <returns></returns>
        public static bool IsAHybridRecorderMode(DFConstantsAndEnums.RecordingMode mode)
        {
            switch (mode)
            {
                case DFConstantsAndEnums.RecordingMode.MultiHybridRecorderMode:
                case DFConstantsAndEnums.RecordingMode.HybridRecorderMode:
                    return true;
            }
            return false;
        }
        /// <summary>
        /// returns true if mode is a hybrid recorder mode
        /// </summary>
        /// <param name="mode"></param>
        /// <returns></returns>
        public static bool IsAHybridRecorderMode(RecordingModes mode)
        {
            switch (mode)
            {
                case RecordingModes.HybridRecorder:
                case RecordingModes.MultipleEventHybridRecorder:
                case RecordingModes.HybridAndStream:
                case RecordingModes.MultipleEventHybridAndStream:
                    return true;
            }
            return false;
        }
        private static readonly HashSet<RecordingModes> _multipleEventModes = new HashSet<RecordingModes>()
        {
            RecordingModes.MultipleEventActive,
            RecordingModes.MultipleEventCircularBuffer,
            RecordingModes.MultipleEventRecorder,
            RecordingModes.ContinuousRecorder,
            RecordingModes.MultipleEventCircularBufferPlusUART,
            RecordingModes.MultipleEventRecorderPlusUART,
            RecordingModes.ContinuousRecorderPlusUART,
            RecordingModes.MultipleEventHybridRecorder,
            RecordingModes.Interval,
            RecordingModes.MultipleEventRAMActive,
            RecordingModes.RecordOnBoot,
            RecordingModes.RecordOnBootPlusUART,
            RecordingModes.MultipleEventCircularBufferAndStream,
            RecordingModes.MultipleEventHybridAndStream,
            RecordingModes.MultipleEventRecorderAndStream
        };
        /// <summary>
        /// returns true if recording mode is a form of multiple event recording
        /// </summary>
        /// <param name="mode"></param>
        /// <returns></returns>
        public static bool IsAMultipleEvent(RecordingModes mode)
        {
            return _multipleEventModes.Contains(mode);
        }

        private static readonly HashSet<RecordingModes> _multipleEventSupportingModes = new HashSet<RecordingModes>()
        {
            RecordingModes.Active,
            RecordingModes.MultipleEventActive,
            RecordingModes.CircularBuffer,
            RecordingModes.CircularBufferPlusUART,
            RecordingModes.MultipleEventCircularBuffer,
            RecordingModes.MultipleEventCircularBufferPlusUART,
            RecordingModes.Recorder,
            RecordingModes.RecorderPlusUART,
            RecordingModes.MultipleEventRecorder,
            RecordingModes.MultipleEventRecorderPlusUART,
            RecordingModes.HybridRecorder,
            RecordingModes.MultipleEventHybridRecorder,
            RecordingModes.ContinuousRecorder,
            RecordingModes.ContinuousRecorderPlusUART,
            RecordingModes.Scheduled,
            RecordingModes.Interval,
            RecordingModes.RAMActive,
            RecordingModes.MultipleEventRAMActive,
            RecordingModes.RecordOnBoot,
            RecordingModes.RecordOnBootPlusUART,
            RecordingModes.RecorderAndStreamSubSample,
            RecordingModes.CircularBufferAndStreamSubSample,
            RecordingModes.HybridAndStream
        };
        /// <summary>
        /// returns true if recording mode is a form of multiple event recording
        /// </summary>
        /// <param name="mode"></param>
        /// <returns></returns>
        public static bool CanBeAMultipleEvent(RecordingModes mode)
        {
            return _multipleEventSupportingModes.Contains(mode);
        }
        private static readonly HashSet<RecordingModes> _streamModes = new HashSet<RecordingModes>()
        {
            RecordingModes.CircularBufferAndStreamSubSample,
            RecordingModes.RecorderAndStreamSubSample,
            RecordingModes.S6A_DeviceStreamingOnly,
            RecordingModes.Streaming,
            RecordingModes.HybridAndStream,
            RecordingModes.MultipleEventCircularBufferAndStream,
            RecordingModes.MultipleEventRecorderAndStream,
            RecordingModes.MultipleEventHybridAndStream
        };
        /// <summary>
        /// returns true if the mode is a recording mode
        /// </summary>
        /// <param name="mode"></param>
        /// <returns></returns>
        public static bool IsAStreamMode(RecordingModes mode)
        {
            return _streamModes.Contains(mode);
        }
        /// <summary>
        /// returns true if either the mode is a recording mode or it will be set to a recording mode shortly
        /// </summary>
        /// <param name="recordingMode"></param>
        /// <param name="streaming"></param>
        /// <returns></returns>
        //29609 At times, especially when Adding a new Test Setup, the recording mode may not yet have been set to the proper streaming value, so this checks DoStreaming also
        public static bool TestWillBeStreaming(RecordingModes recordingMode, bool streaming)
        {
            return IsAStreamMode(recordingMode) || streaming;
        }
        /// <summary>
        /// returns true if the mode is a recording mode
        /// </summary>
        /// <param name="mode"></param>
        /// <returns></returns>
        public static bool IsAStreamMode(DFConstantsAndEnums.RecordingMode mode)
        {
            return IsAStreamMode(ToRecordingModes(mode));
        }
        private static HashSet<RecordingModes> _uartModes = new HashSet<RecordingModes>()
        {
            RecordingModes.CircularBufferPlusUART,
            RecordingModes.RecorderPlusUART,
            RecordingModes.MultipleEventCircularBufferPlusUART,
            RecordingModes.MultipleEventRecorderPlusUART,
            RecordingModes.ContinuousRecorderPlusUART,
            RecordingModes.RecordOnBootPlusUART
        };
        /// <summary>
        /// returns true if the mode is a recording mode w/uart
        /// </summary>
        /// <param name="mode"></param>
        /// <returns></returns>
        public static bool IsAUartMode(RecordingModes mode)
        {
            return _uartModes.Contains(mode);
        }
        /// <summary>
        /// returns true if the mode is a recording mode w/uart
        /// </summary>
        /// <param name="mode"></param>
        /// <returns></returns>
        public static bool IsAUartMode(DFConstantsAndEnums.RecordingMode mode)
        {
            return IsAUartMode(ToRecordingModes(mode));
        }



        /// <summary>
        /// returns true if the recording mode is open-ended (i.e. has no set recording time or post-trigger time)
        /// </summary>
        public static bool IsAnOpenEndedRecordingMode(RecordingModes mode)
        {
            //if we can program either post or pre trigger it's not open ended, it's only open ended if we can program neither
            return !(CanProgramPreTrigger(mode) || CanProgramPostTrigger(mode));
        }
        /// <summary>
        /// returns true if the recording mode is open-ended (i.e. has no set recording time or post-trigger time)
        /// </summary>
        public static bool IsAnOpenEndedRecordingMode(DFConstantsAndEnums.RecordingMode mode)
        {
            return IsAnOpenEndedRecordingMode(ToRecordingModes(mode));
        }

        public static bool CanProgramPreTrigger(RecordingModes mode)
        {
            return ProgrammableTriggersAttribute.IsPreTriggerProgrammable(mode);
        }
        public static bool CanProgramPostTrigger(RecordingModes mode)
        {
            return ProgrammableTriggersAttribute.IsPostTriggerProgrammable(mode);
        }

        public static bool CanProgramPreTrigger(DFConstantsAndEnums.RecordingMode mode)
        {
            return CanProgramPreTrigger(ToRecordingModes(mode));
        }
        public static bool CanProgramPostTrigger(DFConstantsAndEnums.RecordingMode mode)
        {
            return CanProgramPostTrigger(ToRecordingModes(mode));
        }
    }
    [TypeConverter(typeof(EnumDescriptionTypeConverter))]
    public enum QATSExtendedFault
    {
        [Description("Description_EXTFAULT_SUCCESS")]
        EXT_FAULT_TYPE_NONE = 0,

        //S6DB & S6DB-3
        [Description("Description_EXTFAULT_PORT1DROPPED")]
        EXT_FAULT_TYPE_STATUSLINE_PORT_1_DROPPED = 1 << 0,
        [Description("Description_EXTFAULT_PORT2DROPPED")]
        EXT_FAULT_TYPE_STATUSLINE_PORT_2_DROPPED = 1 << 1,
        [Description("Description_EXTFAULT_PORT3DROPPED")]
        EXT_FAULT_TYPE_STATUSLINE_PORT_3_DROPPED = 1 << 2,
        [Description("Description_EXTFAULT_PORT4DROPPED")]
        EXT_FAULT_TYPE_STATUSLINE_PORT_4_DROPPED = 1 << 3,

        [Description("Description_EXTFAULT_PWRHUBDROPPED")]
        EXT_FAULT_TYPE_STATUSLINE_PWRHUB__DROPPED = 1 << 4,

        //Skip bit 5 for reserve.
        //Hardware Detection Faults
        //TSAIR
        [Description("Description_EXTFAULT_DEVICE")]
        FAULT_FLAG__DEVICE = 1 << 6,
        [Description("Description_EXTFAULT_KX134")]
        FAULT_FLAG__DEVICE__KX134 = 1 << 7,
        [Description("Description_EXTFAULT_ADXL373")]
        FAULT_FLAG__DEVICE__ADXL373 = 1 << 8,
        [Description("Description_EXTFAULT_BMI270")]
        FAULT_FLAG__DEVICE__BMI270 = 1 << 9,
        [Description("Description_EXTFAULT_FRAM")]
        FAULT_FLAG__DEVICE__FRAM = 1 << 10,
        [Description("Description_EXTFAULT_BME280")]
        FAULT_FLAG__DEVICE__BME280 = 1 << 11,
        [Description("Description_EXTFAULT_MAGNET")]
        FAULT_FLAG__DEVICE__MAGNET_SENSOR = 1 << 12,

        [Description("Description_EXTFAULT_RTC")]
        FAULT_FLAG__DEVICE__RTC = 1 << 13,
        [Description("Description_EXTFAULT_KSZ")]
        FAULT_FLAG__DEVICE__KSZ = 1 << 14,
        [Description("Description_EXTFAULT_FPGA")]
        FAULT_FLAG__DEVICE__FPGA = 1 << 15,
        [Description("Description_EXTFAULT_NAND")]
        FAULT_FLAG__DEVICE__NAND = 1 << 16,

        [Description("Description_EXTFAULT_FUELGAUGE")]
        FAULT_FLAG__DEVICE__FUEL_GAUGE = 1 << 17,

        [Description("Description_EXTFAULT_FRAMWAKEUP")]
        FAULT_FLAG__CONDITION__FRAM_WAKEUP = 1 << 18,
        [Description("Description_EXTFAULT_RTOS")]
        FAULT_FLAG__CONDITION__RTOS = 1 << 19,
        [Description("Description_EXTFAULT_NETWORKCONFIG")]
        FAULT_FLAG__CONDITION__NETWORK_CONFIG = 1 << 20,
        [Description("Description_EXTFAULT_DHCP")]
        FAULT_FLAG__CONDITION__DHCP_FAIL = 1 << 21,

        //SPDB
        [Description("Description_EXTFAULT_SUPERCAP")]
        EXT_FAULT_TYPE_STATUSLINE_SUPER_CAP = 1 << 22,
        [Description("Description_EXTFAULT_TEMPERATURE")]
        EXT_FAULT_TYPE_STATUSLINE_TEMPERATURE = 1 << 23,

        //S6DB & S6DB-3
        [Description("Description_EXTFAULT_PORT1PG")]
        EXT_FAULT_TYPE_STATUSLINE_PORT_1_PG = 1 << 24,
        [Description("Description_EXTFAULT_PORT2PG")]
        EXT_FAULT_TYPE_STATUSLINE_PORT_2_PG = 1 << 25,
        [Description("Description_EXTFAULT_PORT3PG")]
        EXT_FAULT_TYPE_STATUSLINE_PORT_3_PG = 1 << 26,
        [Description("Description_EXTFAULT_PORT4PG")]
        EXT_FAULT_TYPE_STATUSLINE_PORT_4_PG = 1 << 27,


        [Description("Description_EXTFAULT_BISTNUM")]
        EXT_FAULT_TYPE_BIST_TEST_FAILED_NUM = 1 << 28,
        [Description("Description_EXTFAULT_DEVICEPRESENT")]
        EXT_FAULT_TYPE_STATUSLINE_DEVICE_PRESENT = 1 << 29,

        /* bit_31:22 = reserves */
        EXT_FAULT_TYPE_MAX = 1 << 31,  // limit to 32-bit
    };
    public enum ChannelTypes
    {
        BASE = 0x00,
        BRIDGE = 0x01,
        IEPE = 0x02,
        BRIDGE2LOW = 0x03,
        BRIDGE2HIGH = 0X01,
        IEPE2LOW = 0x04,
        EIPE2HIGH = 0X02,
        DIM = 0x05,
        TOM = 0x06,
        EMB_LIN_ACC_LO = 0x07,
        EMB_LIN_ACC_HI = 0x08,
        EMB_ANG_ACC = 0x09,
        EMB_ANG_ARS = 0x0A,
        EMB_ATM = 0x0B,
        EMB_MAG = 0x0C,
        EMB_MAG_SWITCH = 0x0D,
        EMB_MIC = 0x0E,
        EMB_OPT = 0x0F,
        EMB_RTC_S_MARK = 0x10,
        EMB_RTC_NS_PAD = 0x11,
        SliceTcType_K = 18,    //  0x12 Type K
        SliceTcType_C = 19,    //  0x13 Type C
        SliceTcType_R = 20,    //  0x14 Type R
        SliceTcType_J = 21,    //  0x15 Type J
        SliceTcType_N = 22,    //  0x16 Type N
        SliceTcType_G = 23,    //  0x17 Type G
        SliceTcType_S = 24,    //  0x18 Type S
        SliceTcType_T = 25,    //  0x19 Type T   
        SliceTcType_E = 26,    //  0x1A Type E
    }

    /// <summary>
    /// describes different TMAT templates that are used for creating TMATs entry
    /// </summary>
    public enum TMAT_TEMPLATES
    {
        [StringMetaDataAttr("S6ATMTTemplate_PCM_DAS.tmt;S6ATMTTemplate_PCM_CHANNEL.tmt")]
        S6Air_PCM,
        [StringMetaDataAttr("S6ATMTTemplate_ANALOG_StreamBase.tmt;S6ATMTTemplate_ANALOG_StreamChannel.tmt")]
        S6Air_ANALOG,
        //FB 28292 Templates for "TmNS 144 bit PCM" and "TmNS Supercom 4x ADC PCM"
        [StringMetaDataAttr("S6ATMTTemplate_TmNS_144PCM.tmt")]
        S6Air_TmNS_144PPCM,
        [StringMetaDataAttr("S6ATMTTemplate_TmNS_SuperCom4xPCM.tmt")]
        S6Air_TmNS_SuperCom4xPCM,
        //FB 30035 Added supported templates
        [StringMetaDataAttr("TSRAIRTMTTemplate_PCM.tmt")]
        TSRAIR_PCM,
        [StringMetaDataAttr("TSRAIRTMTTemplate_ANALOG.tmt")]
        TSRAIR_ANALOG
    }
}