using DTS.Common.Classes.Sensors;
using DTS.Common.Enums;
using DTS.Common.Enums.Sensors;
using DTS.Common.Interface.Sensors.SoftwareFilters;
using System;
using System.IO.Ports;

namespace DTS.Common.Interface.Sensors
{
    public interface ISensorData
    {
        string DIUnits { get; set; }
        /// <summary>
        /// gets the calibration due date for the sensor given a sensor calibration
        /// 13065 Sensor "First Use" Date
        /// </summary>
        DateTime GetDueDate(ISensorCalibration sc);
        /// <summary>
        /// initial offset information is stored in a sensor calibration at least in terms of possible settings for the sensor
        /// HOWEVER, the offset to use is stored here for convenience, this is the result of group or test parameters
        /// 
        /// </summary>
        InitialOffset InitialOffset { get; set; }
        SensorConstants.BridgeType Bridge { get; set; }
        ISensorCalibration GetLatestCalibration();
        ISensorCalibration NewEmbeddedSC(string units);

        int DatabaseId { get; set; }
        /// <summary>
        /// 11260 Implement DiagnosticsMode in DataPRO
        /// DiagnosticsMode means the bridge in analog is short circuited to the outside world and only internal resistors are used
        /// </summary>
        bool DiagnosticsMode { get; set; }

        bool IsTestSpecificDigitalOutput { get; set; }               
        bool IsTestSpecificSquib{ get; set; }
        /// <summary>
        /// returns true if the sensor is a test specific digital input
        /// a digital input only created inside a test
        /// </summary>
        bool IsTestSpecificDigitalIn { get; set; }
        bool IsTestSpecificEmbedded { get; set; }
        bool IsTestSpecificEmbeddedClock { get; set; }
        bool IsTestSpecificStreamInput { get; set; }
        bool IsTestSpecificStreamOutput { get; set; }
        bool IsTestSpecificUart { get; set; }
        /// <summary>
        /// At one time all the different DelayMS were using one underlying property for storage, _delayMS.
        /// Now, the individual SquibFireDelayMS, etc. are defined because we don't want controls that are sharing to limit each other.
        /// </summary>
        double DelayMS { get; set; }
        
        double DigitalOutputDelayMS { get; set; }       

        /// <summary>
        /// At one time all the different DurationMS were using one underlying property for storage, _durationMS.
        /// Now, the individual SquibFireDurationMS, etc. are defined because we don't want controls that are sharing to limit each other.
        /// </summary>
        double DurationMS { get; set; }        
        double DigitalOutputDurationMS { get; set; }
        DigitalOutputModes DigitalOutputMode { get; set; }        
        bool DigitalOutputLimitDuration { get; set; }       
        double SquibFireDelayMS { get; set; }
        double SquibFireDurationMS{ get; set; }
        /// <summary>
        /// right now all the Limit Duration mechanisms using the same underlying property for storage (_limitDuration), however
        /// the public access methods (LimitSquibDuration, etc) exist in case we separate them out in the future
        /// </summary>
        bool LimitDuration { get; set; }
        bool LimitSquibFireDuration { get; set; }
        double SquibToleranceLow { get; set; }
        double SquibToleranceHigh { get; set; }
        SquibMeasurementType SquibMeasurementType { get; set; }
        double SquibOutputCurrent { get; set; }
        string DisplayUnit { get; }
        bool BypassCurrentFilter { get; }
        bool BypassVoltageFilter { get; }
        SquibFireMode SquibFireMode { get; set; }        
        /// <summary>
        /// the setting name allows us to refer to different settings and allow it to be more easily included in test setups and channel setups
        /// </summary>
        string SettingName { get; set; }

        DigitalInputModes InputMode { get; set; }

        /// <summary>
        /// Returns comment string. Returns serial number with axis if comment is not present.
        /// </summary>
        /// <returns></returns>        
        string ToDisplayString();
        void ReadXML(System.Xml.XmlElement root);
        void WriteXML(ref System.Xml.XmlWriter writer, bool exportFirstUseDate=true);
        string UUID { get; set; }
        string SerialNumber { get; set; }
        string GetSerialNumberWithAxis(string format);
        string UserSerialNumber { get; set; }
        SensorStatus Status { get; set; }
        string EID { get; set; }
        string Comment { get; set; }        
        bool PerformShuntEmulation{ get; }
        bool CalSignal { get; set; }
        double InternalShuntResistance { get; set; }
        double ExternalShuntResistance { get; set; }
        string UserValue1 { get; set; }
        string UserValue2 { get; set; }
        string UserValue3{ get; set; }
        string GetSerializedSupportedExcitation();
        void SetSupportedExcitationFromString(string s);
        DateTime Created { get; set; }
        int TimesUsed { get; set; }
        int SensorCategory { get; set; }
        bool ByPassFilter { get; set; }
        bool CheckCalibrationSignal{ get; set; }
        string TestObject { get; set; }
        string OriginalPosition { get; set; }
        string Position { get; set; }
        string MainLocation { get; set; }
        string FineLocation1 { get; set; }
        string FineLocation2 { get; set; }
        string FineLocation3 { get; set; }
        string FilterClassIso { get; set; }
        bool IncompatibleSensorAssignment(string sensorDimension, string channelDimension);
        bool IsDigitalInput();
        bool IsDigitalOutput();
        bool IsSquib();
        bool IsUart();
        /// <summary>
        /// uart baud rate
        /// </summary>
        uint UartBaudRate { get; set; }
        /// <summary>
        /// uart data bits
        /// </summary>
        uint UartDataBits { get; set; }
        /// <summary>
        /// uart stop bits
        /// </summary>
        StopBits UartStopBits { get; set; }
        /// <summary>
        /// uart parity
        /// </summary>
        Parity UartParity { get; set; }
        /// <summary>
        /// uart flow control FB 30486 Hardcode FlowControl to NONE for UART sensor type.
        /// </summary>
        Handshake UartFlowControl { get;}
        /// <summary>
        /// the data format of incoming data
        /// </summary>
        UartDataFormat UartDataFormat { get; set; }
        bool IsStreamInput();
        ///<summary>
        /// udp address setting value
        ///</summary>
        string StreamInUDPAddress { get; set; }
        bool IsStreamOutput();
        ///<summary>
        /// udp profile setting value
        ///</summary>
        UDPStreamProfile StreamOutUDPProfile { get; set; }
        ///<summary>
        /// udp address setting value
        ///</summary>
        string StreamOutUDPAddress { get; set; }
        ///<summary>
        /// time channel id setting value
        ///</summary>
        ushort StreamOutUDPTimeChannelId { get; set; }
        ///<summary>
        /// data channel id setting value
        ///</summary>
        ushort StreamOutUDPDataChannelId { get; set; }
        ///<summary>
        /// tmns config setting value
        ///</summary>
        string StreamOutUDPTmNSConfig { get; set; }
        ///<summary>
        /// irig data packet interval setting value
        ///</summary>
        ushort StreamOutIRIGTimeDataPacketIntervalMs { get; set; }
        /// <summary>
        /// interval in ms between sending out TMATs information
        /// http://manuscript.dts.local/f/cases/29987/Add-CG-DP-TMATS-interval-UI-support
        /// </summary>
        ushort StreamOutTMATSIntervalMs { get; set; }
        bool CheckOffset { get; set; }
        bool MeasureNoise{ get; set; }

        bool MeasureExcitation { get; set; }

        bool Invert { get; set; }

        string Model{ get; set; }

        string Manufacturer{ get; set; }

        string UserPartNumber { get; set; }

        double Capacity{ get; set; }
        //FB 13120 Added FilterClass property 
        IFilterClass FilterClass { get; set; }

        double FullScaleCapacity{ get; }
        double OffsetToleranceLow{ get; set; }
        double OffsetToleranceHigh{ get; set; }

        void SetDisplayUnitNoNotify(string unit);
        
        double RangeLow{ get; set; }
        double RangeMedium{ get; set; }
        double RangeHigh { get; set; }

        ExcitationVoltageOptions.ExcitationVoltageOption[] SupportedExcitation{ get; set; }

        void SetExcitationsNoNotify(ExcitationVoltageOptions.ExcitationVoltageOption[] excitations);

        ISensorCalibration Calibration{ get; set; }
        
        double BridgeResistance { get; set; }               
        bool UniPolar{ get; set; }

        bool IgnoreRange{ get; set; }

        string LastUpdatedBy { get; set; }

        int Version{ get; set; }

        void SetLocalOnly(bool bLocalOnly);

        short AxisNumber{ get; set; }

        short NumberOfAxes{ get; set; }
        int CalInterval { get; set; }
        string Polarity { get; set; }

        DateTime LastModified { get; set; }

        string ISOCode{ get; set; }
        string ISOChannelName { get; set; }
        string UserCode { get; set; }
        string UserChannelName { get; set; }
        string PhysicalDimension{ get; set; }

        string Direction{ get; set; }
        bool DoNotUse{ get; set; }

        bool Broken{ get; set; }
        double InputActiveValue { get; set; }
        double InputDefaultValue { get; set; }
        FilterClassType FilterType { get; }
        int SensorCalWarningPeriodDays { get; set; }
        /// <summary>
        /// Date of first use, null indicates value not set
        /// value is only valid when using the latest calibration (as indicated by LatestCalibrationId)
        /// 13065 Sensor "First Use" Date
        /// </summary>
        DateTime? FirstUseDate { get; set; }
        /// <summary>
        /// Latest calibration for sensor, null indicates value not set
        /// 13065 Sensor "First Use" Date
        /// </summary>
        int ? LatestCalibrationId { get; set; }
    }
}