init

Common/DTS.Common.Serialization/DDAS (Chrysler)/DDASTestDefinition.h

@@ -0,0 +1,133 @@
+/////////////////////////////////////////////////////////////////////////////
+// DDASTestDefinition.h
+// --------------------
+// Defines the data acquisition system configuration and channels for a test.
+//
+//
+// AUTHOR:	  A. J. Owski
+//    LOC:	  1250
+//   DEPT:	  5260 Tool Development 
+//			  (formerly Instrument Systems)
+//
+// COPYRIGHT: (c) 2002-2004 DaimlerChrysler Corp.
+//
+// REVISIONS: (most-recent at top of list).
+//
+// Date	   Init	Description of Change
+// -------- ---	---------------------
+// 06/22/05 WJP Add support for MemoryOptionFlags bits MEMOPT_PREEVENT and 
+//				MEMOPT_PREEVENTXXX, Programmable Pre-Event blocks up to 99 and 
+//				511 introduced in Memory Units versions 2.40 and 3.10, 
+//				respectively.
+// 10/19/04 WJP Add support for channel (analog) triggers.
+// 04/02/04 WJP General clean up
+// 07/22/03 WJP Added HardwareType
+//
+//
+
+#ifndef DDASTYPENAME					// If these def's aren't def'd,
+
+#define TESTDEFEXT		".tdf"
+#define DDASTYPENAME	"DDAS V5"
+#define DDASFILEVERS	"Ver 500"
+
+enum FileTypeFlags
+{
+FILETYPE_IMPORTED4X						// Test was imported from 4x
+};
+
+enum HardwareType						// Hardware type values
+{										//   in upper 16 bits of FileTypeFlags
+	HWTYPE_UNKNOWN,						// None specified - old DDAS
+	HWTYPE_DDAS3,						// DDAS III hardware
+	HWTYPE_KAYSERTHREDE,				// Kayser-Threde hardware (future)
+	HWTYPE_COUNT
+};
+
+typedef struct tagFILEINFOBLOCK
+{
+	UINT Size;							// Block Size (including nSize)
+	char FileTypeName[12];				// Software Type Name
+	char FileTypeVers[12];				// File Version Name
+	UINT FileTypeFlags;					// File Type Flags
+										//	- Hardware Type in upper 16 bits
+										//	- File Type in lower 16 bits
+	char CreatedByName[16];				// Created by T-number
+	char UpdatedByName[16];				// Updated by T-number
+}FILEINFOBLOCK;
+
+
+typedef struct tagDATASYSTEMBLOCK
+{
+	UINT Size;							// Block Size (including nSize)
+	UINT NumberOfSystems;				// No of systems in this definition
+	UINT ChannelsPerSystem;				// Chan per system in this definition
+	UINT MaxSampleRate;					// Max (or default) sample rate 
+	UINT SizeOfConfig;					// Size of 1 DDASCONFIGBLOCK
+}DATASYSTEMBLOCK;
+
+
+typedef struct tagDDASCONFIGBLOCK		// One config block per system
+{
+	UINT  Size;							// Block Size (including nSize)
+	short AnalogUnitNo;					// DDAS analog unit for this test
+	short AnalogOptions;				// DDAS analog unit options
+	short MemoryUnitNo;					// DDAS memory unit for this test
+	short MemoryOptions;				// DDAS memory unit options
+	long  MemorySize;					// DDAS memory unit RAM (bytes)
+}DDASCONFIGBLOCK;
+
+enum AnalogOptionFlags
+{
+	ANAOPT_CHANTRIGGERS					// Analog unit has channel triggers
+};
+
+enum MemoryOptionFlags
+{
+	MEMOPT_TAPEMODE,					// Memory unit has tape mode
+	MEMOPT_PREEVENT,					// Memory unit can sel pre-event to 99
+	MEMOPT_PREEVENTXXX					// Memory unit can sel pre-event to 511
+};
+
+
+enum RecordModes
+{
+	RECORDMODE_EVENT,					// Normal (event) mode
+	RECORDMODE_TAPE						// Tape (manual) mode
+};
+
+
+typedef struct tagACQUISITIONBLOCK		// Defines data acq params this test
+{
+	long nSize;							// Block Size (including nSize)
+	long nRecordMode;					// Enumerated constant data mode
+	long SampleRate;					// Samples per second
+	long TotalSamples;					// Total samples in record
+	long PreEventSamples;				// Pre-Event samples (Rec Mode only!)
+	long TapeModeChannels;				// No of Channels (Tape Mode only!)
+//	long nTrigBlock;					// Trigger block size if non-zero
+	long nTrigBlock;					// Number of trigger entries (can be 0).
+}ACQUISITIONBLOCK;
+
+
+// To enable trigger,
+//	ChanNo and LevelPct must be nonzero 
+//	and TRIGCHANDSBL must not be set in LevelPct 
+typedef struct tagTRIGCHANDEF			// Defines chan (analog) trigger
+{
+	BYTE ChanNo;						// Channel number to use as trigger
+	BYTE LevelPct;						// Trig level in % full scale (0=off)
+}TRIGCHANDEF;							//	Trigger when signal exceeds +/-level.
+
+#define MAXTRIGCHANS 4
+#define TRIGCHANDSBL 0x80
+
+typedef struct tagTRIGCHANBLOCK			// Defines chan (analog) trigs this test
+{
+	unsigned short SizeBlock;			// Block Size in bytes (including nSize)
+	unsigned short NumTrigs;			// Number of entries in array TrigChan
+	TRIGCHANDEF TrigChan[MAXTRIGCHANS];	// Channel (analog) triggers.  (NOTE that
+}TRIGCHANBLOCK;							//	this will be a variable size array, 
+										//	but we sized it to 1 to avoid warnings.)
+
+#endif