init

Common/DTS.Common/.svn/pristine/86/860d2b49a2731f09f2456d83ba1409195620a587.svn-base

@@ -0,0 +1,106 @@
+using System.ComponentModel.DataAnnotations;
+using System.ComponentModel.DataAnnotations.Schema;
+
+namespace DTS.Common.Interface.DataRecorders
+{
+    /// <summary>
+    /// interface describing a DAS channel in the Db
+    /// </summary>
+    public interface IDASChannelDBRecord
+    {
+        /// <summary>
+        /// a string id for the hardware the channel belongs to
+        /// (serialnumber_dastype)
+        /// </summary>
+        string HardwareId { get; set; }
+        [Key]
+        [Column("DASChannelId")]
+        /// <summary>
+        /// the id/key of the DAS channel record in the db
+        /// </summary>
+        int DaschannelId { get; set; }
+        [Column("DASId")]
+        /// <summary>
+        /// the das db id of the Hardware this channel belongs to
+        /// </summary>
+        int? Dasid { get; set; }
+        /// <summary>
+        /// the physical channel index of the channel among channels on the DAS
+        /// </summary>
+        int ChannelIdx { get; set; }
+
+        /// <summary>
+        /// BitMask for bridges supported by the channel 
+        /// Bit 0 indicates IEPE
+        /// Bit 1 indicates quarter bridge
+        /// Bit 2 indicates half bridge
+        /// Bit 3 indicates full bridge
+        /// Bit 4 indicates digital input
+        /// Bit 5 indicates squib fire
+        /// Bit 6 indicates digital output
+        /// Bit 7 indicates Half bridge signal plus (G5 signal plus)
+        /// Bit 8 indicates RealTime Clock 
+        /// Bit 9 indicates UART
+        /// </summary>
+        int SupportedBridges { get; set; }
+        /// <summary>
+        /// BitMask indicating what excitation options the channel supports
+        /// Bit 0 indicates an invalid excitation (undefined)
+        /// Bit 1 indicates 2V
+        /// Bit 2 indicates 2.5V
+        /// Bit 3 indicates 3V
+        /// Bit 4 indicates 5V
+        /// Bit 5 indicates 10V
+        /// Bit 6 indicates 1V
+        /// </summary>
+        int SupportedExcitations { get; set; }
+
+        [Column("DASDisplayOrder")]
+        /// <summary>
+        /// The display order of the channel among channels on the DAS
+        /// note that the physical order of channels and the display order may not match for
+        /// some hardware
+        /// </summary>
+        int DASDisplayOrder { get; set; }
+        /// <summary>
+        /// Indicates that record should be stored only in the local db and not propagated to a central db
+        /// deprecated
+        /// </summary>
+        bool LocalOnly { get; set; }
+
+        /// <summary>
+        /// BitMask indicating what Digital input modes are supported on the channel (if channel supports digital input bridge type)
+        /// Bit 0 indicates an invalid mode
+        /// Bit 1 indicates Transition low to high (TLH)
+        /// Bit 2 indicates Transition high to low (THL)
+        /// Bit 3 indicates Contact closure normally open (CCNO)
+        /// Bit 4 indicates Contact closure normally closed (CCNC)
+        /// </summary>
+        int SupportedDigitalInputModes { get; set; }
+
+        /// <summary>
+        /// BitMask indicating what Squib fire modes are supported on the channel (if the channel supports squib fire bridge type)
+        /// Bit 0 indicates an invalid mode (fire mode not set)
+        /// Bit 1 indicates capacitor discharge
+        /// Bit 2 indicates constant current
+        /// Bit 3 indicates AC discharge
+        /// </summary>
+        int SupportedSquibFireModes { get; set; }
+
+        /// <summary>
+        /// Bit mask indicating what digital output modes are supported (if the channel supports digital output bridge type)
+        /// a value of 0 indicates no digital output or off
+        /// Bit 0 indicates 5V low to high transition (FVLH)
+        /// Bit 1 indicates 5V high to low transition (FVHL)
+        /// Bit 2 indicates contact closure normally open (CCNO)
+        /// Bit 3 indicates contact closure normally closed (CCNC)
+        /// </summary>
+        int SupportedDigitalOutputModes { get; set; }
+        string ModuleSerialNumber { get; set; }
+        int SettingId { get; set; }
+        /// <summary>
+        /// array index of the module the channel belongs to among modules on a DAS
+        /// </summary>
+        int ModuleArrayIndex { get; set; }
+    }
+}

Common/DTS.Common/.svn/pristine/86/86160fa255aaa2bb601b03f6ba9f967f6dcbdf29.svn-base

@@ -0,0 +1,21 @@
+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Text;
+using System.Threading.Tasks;
+using System.Xml.Serialization;
+
+namespace DTS.Common.XMLUtils
+{
+    public class HardwareListXMLClass
+    {
+        public HardwareListXMLClass()
+        {
+            Hardware = new List<string>();
+        }
+
+        [XmlElement("Hardware")]
+
+        public List<string> Hardware { get; set; }
+    }
+}

Common/DTS.Common/.svn/pristine/86/865b0723a6adeda7368f39000bf6fc2aea15f33b.svn-base

@@ -0,0 +1,14 @@
+using DTS.Common.Interface.GroupTemplate;
+using Prism.Events;
+
+namespace DTS.Common.Events.GroupTemplates.TemplateChannelList
+{
+
+    /// <summary>
+    /// The GroupTemplateListGroupTemplateSelectedEvent event.
+    /// </summary>
+    /// 
+    /// <remarks>called when a template is selected.</remarks>
+    ///
+    public class TemplateChannelListOrderChangedEvent : PubSubEvent<IGroupTemplateChannel> { }
+}

Common/DTS.Common/.svn/pristine/86/86e014f0a0c4db28e828e59c0be0476249def879.svn-base

@@ -0,0 +1,21 @@
+namespace DTS.Common.Enums.DBExport
+{
+    /// <summary>
+    /// different tags for an ISODll.MME_FilterClass
+    /// </summary>
+    public enum CustomFilterFields
+    {
+        Date,
+        Expired,
+        Filter_Class,
+        History,
+        Last_Change,
+        Last_Change_Text,
+        Remarks,
+        S_GUID,
+        SortKey,
+        Text_L1,
+        Text_L2,
+        Version,
+    }
+}