Common/DTS.Common.SharedResource/obj/Debug/DTS.Common.SharedResource.Strings.StringResources.resources

<EFBFBD><EFBFBD><EFBFBD><EFBFBD><00>lSystem.Resources.ResourceReader, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089#System.Resources.RuntimeResourceSetPADPADP<44><50>
<EFBFBD><EFBFBD><EFBFBD><0E>ZK<11><><EFBFBD><1D><>g<1E><>@.<2E> 4<>8<><38>sN<73>GFP<46><50>AQ<41>Q<EFBFBD>i<EFBFBD>B<EFBFBD>n<EFBFBD><6E><EFBFBD>u<EFBFBD>wOy<4F><79>䈀<EFBFBD>q<EFBFBD><71>=<3D><><EFBFBD>>c<><63>bk<62><6B><EFBFBD>x<EFBFBD><78>2ꡀ<32>)<29><>kd<6B><64><16><><EFBFBD>F1ـ<31><D980><EFBFBD><EFBFBD>&<26><>Nꀟ<4E><EA809F><EFBFBD><EFBFBD>Y<EFBFBD><59>k<EFBFBD><07>0<EFBFBD><11><><EFBFBD>(<28><>4E<34><45>Yl<59>c<EFBFBD>q<EFBFBD>n<EFBFBD>x<EFBFBD>D<EFBFBD><44><EFBFBD><EFBFBD>W<EFBFBD><57>K<EFBFBD><4B><EFBFBD>#+<2B><>xJ<78><4A>{<7B><><EFBFBD>畨<EFBFBD><E795A8><EFBFBD><EFBFBD><EFBFBD>&<26><><06>΁qoԁp|ց<>}<7D><><EFBFBD><EFBFBD>큚c<10><><EFBFBD>8<EFBFBD>p;<3B>!<21>Z<EFBFBD><07>i<EFBFBD>24j<34>,+l<>yo<>^<5E>y<EFBFBD><79>5z<35>B{<7B><>,|<7C>a<EFBFBD>~<7E>D<EFBFBD>~<7E>a<13><><EFBFBD><0B><>\͖<><CD96><07><>gF<67><46><EFBFBD>5Ƃ<35><C682>ׂJ<05><0F>Nu <20><><EFBFBD>&<26><<3C>=<3D>]J<>^<5E>S<EFBFBD>݁[<5B><><EFBFBD>y<EFBFBD><79>7<37>A<EFBFBD><41><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><01><><EFBFBD><18><><EFBFBD>v郪<76><E983AA><EFBFBD>:<3A>	<09><>^;<3B><>XA<58>z\<5C><><EFBFBD>|<7C><>$<24><>.2<EFBFBD><EFBFBD>9<EFBFBD><EFBFBD><EFBFBD><EFBFBD>ٻ<EFBFBD>=<3D>Ä<EFBFBD>xȄR<C884>Ȅ?0Ԅ<30><D484><EFBFBD><EFBFBD>(<28><><EFBFBD><EFBFBD> <05><>>!<21>k<EFBFBD>-<2D><><EFBFBD>-<2D>I<>?1U<31><55><EFBFBD>W<EFBFBD><57> e<><65><EFBFBD>e<EFBFBD><65>d~<7E>#k<><6B><EFBFBD>䶅<EFBFBD>
<EFBFBD><EFBFBD>S}Ѕ<><D085>߅<EFBFBD><DF85><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><08><1F>(<28><>y.<2E><>8<>m<EFBFBD>8<EFBFBD><38><EFBFBD>G<EFBFBD>N<EFBFBD>Y<EFBFBD>><3E>l<EFBFBD><6C><EFBFBD>o<EFBFBD>hz<68>K<EFBFBD>|<7C>yΙ<79>P+<2B><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>'ʆ<><CA86>Ԇ*<2A>ֆ<EFBFBD>G<EFBFBD><47>m[톅<><ED8685><EFBFBD>	<09><><EFBFBD>b<0B><><EFBFBD><12>g,<2C>,-q<>V<EFBFBD>q<EFBFBD>.%s<>(@s<>)@s<>*@s<>-@s<>.@s<>/@s<>q<EFBFBD><71><EFBFBD>><3E>Ň<EFBFBD>^ˇ<><03><>V<EFBFBD><0B><><EFBFBD><12>Z<1D>{"<22><>F%<25><>+2<>4YG<59><47><EFBFBD>L<EFBFBD>
M<>`V<><56><EFBFBD>Z<EFBFBD><5A><EFBFBD>Z<EFBFBD>Po<50>T<EFBFBD>q<EFBFBD><71>o<EFBFBD><6F><EFBFBD>ꇈ<EFBFBD><07><><EFBFBD>O<EFBFBD><4F>ᯈxTˈ<54>	؈<><D888>ۈ<EFBFBD><DB88><EFBFBD><EFBFBD>͜<EFBFBD><CD9C>*<1A><><EFBFBD><EFBFBD><04>&
<EFBFBD><11><14><><EFBFBD><1F>
<0A>L<EFBFBD><4C><EFBFBD>L<EFBFBD><4C>O<>I<EFBFBD>V<EFBFBD>+_<>{^_<><5F><EFBFBD>k<EFBFBD><6B><EFBFBD>r<EFBFBD><72>|w<><77>/y<>/<2F><EFBFBD>x<EFBFBD><78><EFBFBD>*ԩ<><D4A9>ǰ<EFBFBD>0<EFBFBD>ʉ\<18><>1<EFBFBD><31><EFBFBD>YQ<59><51><EFBFBD><EFBFBD><06>O<EFBFBD><1B><>><1C><>"<22><><EFBFBD>"<22><>=><3E><>[E<>L3H<33><48>HY<48>ơl<C6A1><6C>p<><70>k<EFBFBD><6B><EFBFBD>h<EFBFBD><68><01><><EFBFBD>D<EFBFBD><44><EFBFBD>d4<0B>1<EFBFBD><0F><><EFBFBD><0F><><12><>3<19>l<EFBFBD><1A><><EFBFBD>/<2F><>[5<>0D6<44>1<EFBFBD>A<EFBFBD>ݹe<DDB9><65><<3C><><EFBFBD>禋<EFBFBD><E7A68B><EFBFBD><EFBFBD><EFBFBD>#<23><>A<EFBFBD>ċM<><4D>!<21><><EFBFBD>|<7C><><EFBFBD>`<14><>z <0C><1E><15><><EFBFBD><1E><>b+<2B>U<EFBFBD>;<3B><0B>`<60>yLh<4C>$m<>]<5D>s<EFBFBD>L<EFBFBD><4C><EFBFBD><EFBFBD>Ϡ<EFBFBD>e߲<65>-<2D><>-<2D><><EFBFBD>-匽<><E58CBD><EFBFBD><EFBFBD><01>Dt-<2D><><EFBFBD><<3C><><EFBFBD>_<EFBFBD><5F>g}<7D><>L<EFBFBD><4C>Q<EFBFBD><51><EFBFBD><EFBFBD>M<EFBFBD><4D>Y<EFBFBD><59><EFBFBD>4d<34><64>,<2C><>ʢ<EFBFBD><CAA2><EFBFBD><EFBFBD>ʍ<EFBFBD><CA8D>ˍ@<40><><EFBFBD>L<EFBFBD><4C><EFBFBD><EFBFBD>><04>{=I<><0E>M<EFBFBD>M<EFBFBD>[<5B><>:]<5D>u<EFBFBD>h<EFBFBD><68>|<7C>1<EFBFBD><31><EFBFBD>5<EFBFBD><35><EFBFBD>U<EFBFBD><55><EFBFBD><EFBFBD><11><>@<1B><>
7Ў<08>ՎY<D58E>ߎ<EFBFBD><19><>
S
<0A><><12>C<EFBFBD>#<23><><EFBFBD>*<2A>e<EFBFBD>0<EFBFBD>0<EFBFBD>K<EFBFBD><1C>e<EFBFBD>H<EFBFBD>q<EFBFBD>|s<><73><EFBFBD>s<EFBFBD><73>Q<EFBFBD><51>rS<72><53>:<3A><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>9<EFBFBD><39>6<1A><><EFBFBD>2<EFBFBD><32><EFBFBD><06><><EFBFBD>ȹ<EFBFBD>]<5D>܏ <20><>g<EFBFBD><67><EFBFBD>;6叄Z<07><>N<0F>u<EFBFBD><1B>hP%<25><><EFBFBD>(<28>"<22>-<2D><1B>G<EFBFBD>]
P<><50><EFBFBD>R<EFBFBD><52><EFBFBD>\<5C>;;h<><68><EFBFBD>o<EFBFBD>m݀<6D><DD80><1C><>s<EFBFBD><73><EFBFBD><EFBFBD>j<EFBFBD><6A><14>Ɛ<1A>ː<EFBFBD>w䐗0<0E><>V<12><>J#<23><><EFBFBD>Q<EFBFBD><51>!b<>c║NE<4E><45>G<EFBFBD><47><EFBFBD><EFBFBD><EFBFBD>ʑU.ˑ
<0A>ԑ<EFBFBD><D491><EFBFBD><EFBFBD>uB(<28>_ia<69>0c<><63>lh<6C>*z<><7A><08><>hI<68><49><EFBFBD><02><>ؒ<EFBFBD><D892>*S<><53><EFBFBD>3<EFBFBD><33>`<1C><><EFBFBD>:<3A><><EFBFBD>j<EFBFBD><6A><EFBFBD><1B><><EFBFBD>~<07>"0<13><><EFBFBD> <20>'!<21>e<EFBFBD>)<29><>!.<2E><>^d<><64>g<><67>ej<65>&<26>m<EFBFBD>tp<74>o%u<>n<EFBFBD>|<7C>\#<><7F>M<EFBFBD><4D><16><><EFBFBD><EFBFBD><EEA597>m<EFBFBD><6D>'[<5B><><EFBFBD>ד8ߓ2&<0B>I<EFBFBD><11>s7<73><37><EFBFBD>?<3F><><EFBFBD>E<EFBFBD><45>5M<35><4D>x`<60><00>a<EFBFBD><61><EFBFBD>g<EFBFBD>#h<>Cep<65>y$<24><><1B><><EFBFBD>জ<EFBFBD>¸<EFBFBD><C2B8>x <20><>&<26>є<EFBFBD>(֔ݢߔ<DDA2>r
<EFBFBD>u<15><>Q%<25>2<EFBFBD>%<25>P)<29><>U)<29>b<EFBFBD>/<2F>dp0<70>8?<3F><>A<><41><EFBFBD>A<EFBFBD>uhM<68><4D><EFBFBD>R<EFBFBD>cn<><6E>4q<34><71><EFBFBD>v<EFBFBD><76><EFBFBD>y<EFBFBD><79><EFBFBD>}<7D><><EFBFBD><EFBFBD><EFBFBD>]M<><4D>,(<28><>6T<36><54>qo<71><6F>}<7D>ƕu<C695>Е<EFBFBD><D095>G<EE95A6><47>`.<01><><EFBFBD><04>lM<08><>}<08><><11>a<1C> <20>	)<29><>0<><30><EFBFBD>6<EFBFBD>^<5E>8<EFBFBD><38><EFBFBD>;<3B>	<09>B<EFBFBD><42><EFBFBD>N<EFBFBD><4E><EFBFBD>r<EFBFBD><10>y<EFBFBD>n_<6E><5F><EFBFBD>h<EFBFBD><68>m<11><><EFBFBD>"<22><><08><><EFBFBD>W<EFBFBD><57><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>x<EFBFBD><78><EFBFBD>,[Ö<02>ǖ<1E>֖
ٖ<EFBFBD>#<23><>	喏E<E5968F><45>E<EFBFBD><0F>Y<EFBFBD>#<23><><EFBFBD>0<EFBFBD>7<<3C>rVg<56>K<12><><EFBFBD><15><>A-<2D><>/@<40><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>K䴗<4B>V<EFBFBD><56><EFBFBD><EFBFBD>Ɨ<19>̗<EFBFBD><CC97>՗<EFBFBD><D597><EFBFBD><EFBFBD>D<EFBFBD><44><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>X_<58><5F><EFBFBD>L<07><>
<EFBFBD><EFBFBD>n
<EFBFBD><EFBFBD>p
<EFBFBD><EFBFBD>3<1A><> <20>I?-<2D><><EFBFBD>3<EFBFBD>Rp9<70><39>@<40><>J<><4A>|c<>o<><6F><EFBFBD>u<EFBFBD><EFBFBD>x<EFBFBD><78>=<3D><><EFBFBD>x<EFBFBD><78>(w<><77><EFBFBD>2<EFBFBD><32>B<1F><>|t<><74>z<EFBFBD><7A><EFBFBD>(И<>ט<><D798>䘋<EFBFBD>䘌<EFBFBD>䘍<EFBFBD>䘏<EFBFBD><E4988F><EFBFBD><EFBFBD> <10>N<EFBFBD><15>-<16>|<7C><1C><>F1<46><31>L?<3F>ևE<D687>E<EFBFBD>M<EFBFBD>WQ<><51>T<>l<EFBFBD>^<5E>p<EFBFBD>c<EFBFBD><63><>C<><43><EFBFBD>Ѭ<EFBFBD>><3E><>Y@<40><>~<7E>̙<EFBFBD>Jݙ<4A><DD99><EFBFBD><EFBFBD><EFBFBD><EFBFBD>󙕨<EFBFBD><F39995A8><06><0F><07><>-<0E><><EFBFBD>&<26>Y<EFBFBD>3<EFBFBD><33>y4<79>s`<60><>Lm<4C><6D>fy<66><79>
<EFBFBD><EFBFBD>1k<EFBFBD><EFBFBD><EFBFBD>̟<EFBFBD>%춚X<ECB69A><58><EFBFBD><EFBFBD>o<EFBFBD><6F><EFBFBD>Nۚҁ<DB9A><D281>߶<EFBFBD><DFB6>Ӟ<EFBFBD><D39E>hY<0C><><EFBFBD>
<0A>	<1D>"<22><1D>tK<74><4B><EFBFBD>S<EFBFBD><53><EFBFBD>\<5C><><EFBFBD>`<60><>h<>D|<7C>J<12><>E<EFBFBD><45><EFBFBD>h<EFBFBD><68><EFBFBD>j<EFBFBD><6A><EFBFBD>k<EFBFBD><6B><EFBFBD>=<07><><EFBFBD>%M<><4D>U2<55><32>N>ʛX͛<58><CD9B>Л<EFBFBD>>ԛ<>Q՛<51>s<EFBFBD><73>E]<1B>*G%<25>ڶ9<DAB6>N<EFBFBD>F<EFBFBD><46>M<><4D>_R<5F><52>b<>Bo<><6F><EFBFBD>q<EFBFBD>>r<>J}u<><1B>y<EFBFBD><79><EFBFBD>~<7E><><EFBFBD><EFBFBD>-<2D><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>f<EFBFBD><66>?X<><58><EFBFBD><1E><>!<21><><EFBFBD>O~לُܜN<DC9C><10>j%<25><><EFBFBD>/<2F>U<EFBFBD>2<EFBFBD>e7<>d<EFBFBD>:<3A>
<EFBFBD><<3C>O<EFBFBD>L<EFBFBD><4C>kY<6B>9<EFBFBD>_<EFBFBD><5F><EFBFBD>i<EFBFBD>M<EFBFBD>m<EFBFBD><6D>p<><70>$~<7E>#q~<7E>k<1D><><1A><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Tvŝ<76>ɝ<12>ѝتӝ<D8AA>X<EFBFBD><58>ä<07>]<5D><0B><><EFBFBD><0B><>W<17>/F<18><><EFBFBD><1E><>P <20>z<EFBFBD>,<2C>L'1<><31><EFBFBD>4<EFBFBD><34>m:<3A>];<3B>_<EFBFBD>;<3B>\<5C>C<EFBFBD>a<\<5C>_<EFBFBD>]<5D><14>a<EFBFBD><61>G<EFBFBD><47>M	<09><>i<><69>u<EFBFBD>
yӞ<79><D39E>۞<0C>ߞ<EFBFBD><DF9E><EFBFBD><EFBFBD>"<22><><EFBFBD>o"<19><>X<1D><><EFBFBD>'<27><>W@<40><19>\<5C><>wo<77>pYv<59><76>Ԗ<EFBFBD>	<09><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>mП<<3C><><EFBFBD><EFBFBD><03>|<1D><><EFBFBD>)<29>
<EFBFBD>?<3F><><EFBFBD>D<EFBFBD><44>H<><48>&M<><0F>e<EFBFBD>y<1E><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>C+<2B><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>P<EFBFBD><50><EFBFBD><EFBFBD>p<EFBFBD><70>v3<76><33><EFBFBD><EFBFBD><EFBFBD><EFBFBD>?η<>Yj<59><6A>=ɸ<><C9B8>ɸ<EFBFBD>Jd<4A><64><EFBFBD>7<EFBFBD><37><EFBFBD><EFBFBD>Ƞ3$ߠ<>0<EFBFBD><30><EFBFBD>U<EFBFBD><55>d<><64>&F<03>'F<03>(F<03>)F<03>*F<03>+F<03>,F<03>-F<03>.F<03>ޡ<0F><>v)<29>.R:<3A><1B>:<3A><><EFBFBD>Q<EFBFBD>ae]<5D><1C>]<5D><>Zk<5A>hYy<59>J<EFBFBD>{<7B><>䤡w<E4A4A1><77><EFBFBD>24<32><34>5f<35><66>Mfѡ<66>֡<><D6A1><EFBFBD><EFBFBD>}n<><6E><EFBFBD><EFBFBD><EFBFBD><EFBFBD><18><01><><EFBFBD><0B><>P
<0A><><EFBFBD><10>pq<1B>sq<1B>-g1<67>e<EFBFBD>:<3A>m<EFBFBD>L<EFBFBD>|<o<>uc<75><63>ω<EFBFBD><CF89><EFBFBD>6<EFBFBD><36><EFBFBD><04><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>o<><6F><EFBFBD><EFBFBD>¢/*آ<>E<EFBFBD><45>T<0E><>:6<><36>c(<17><>f!<21><>K,<2C><04>7<EFBFBD>~;<3B><>X<>рY<D180><59>Ng<4E>u<EFBFBD>t<EFBFBD>
(x<><78><1C><>%蓣%x<><78><19><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>z<EFBFBD><7A><EFBFBD>U湣D<E6B9A3>ʣNDѣCᣉe<E1A389><65><EFBFBD>x<02>,<2C><0C><><EFBFBD><0E>H<EFBFBD><1B>E<EFBFBD>><3E>9:@<40><><EFBFBD>Q<EFBFBD><51><EFBFBD>W<EFBFBD><57>ij<69>o<><6F>`u<><75><EFBFBD>v<EFBFBD>e,w<>w<EFBFBD>x<EFBFBD>9<00><>i\<5C><><EFBFBD>;<3B><>.<2E><><EFBFBD>R<><52>ɹ<EFBFBD><C9B9><EFBFBD><EFBFBD>դ-֤<7F><D6A4><EFBFBD><EFBFBD><00><><EFBFBD>Y<EFBFBD><59><EFBFBD><18><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Z<EFBFBD><5A><EFBFBD>E<02>g<EFBFBD><13><>/<2F>)<29>4<EFBFBD>7u9<75>
<EFBFBD>><3E><><EFBFBD>C<EFBFBD><43><EFBFBD>L<EFBFBD><4C><EFBFBD>U<EFBFBD><55><EFBFBD>_<EFBFBD><5F>a<>?<3F>q<EFBFBD>I<EFBFBD><49><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>:<3A><><EFBFBD><EFBFBD><16><><EFBFBD>jҥ
_٥sߥ<><DFA5>㥳<EFBFBD>L<EEA5B2><4C><EFBFBD><EFBFBD><0C>M<EFBFBD><19>V<EFBFBD> <20>XZ%<25><>[)<29>B<EFBFBD>2<EFBFBD>t5<74><35>GA<47>#`Y<>]<5D>_<EFBFBD><5F>+e<>#o<><6F><EFBFBD><EFBFBD><EFBFBD>齇<EFBFBD>&<26><><EFBFBD>^<5E><><EFBFBD>+<2B><>\<5C><><EFBFBD><EFBFBD>Ʀ4<C6A6>Ȧ<EFBFBD><C8A6>ϦVwզ<77>ܦ<>W<EFBFBD><57>x<08><><EFBFBD>R<08>G&#<23><><EFBFBD>8<EFBFBD><38><EFBFBD>:<3A>#<23>?<3F><><EFBFBD>A<EFBFBD><41>F<7F>g<EFBFBD>d<EFBFBD><64>/r<>1"<22><><EFBFBD><EFBFBD><7F>}<7D><><EFBFBD>!ܞ<><DC9E><EFBFBD>Ƨ%<25>ϧ]<5D>ۧ<EFBFBD>g<EFBFBD><67>l<><6C><EFBFBD><EFBFBD><EFBFBD><EFBFBD>L<19><><EFBFBD><1D>><3E>1<EFBFBD><31><EFBFBD>@<40><>PD<50><44>GG<47>|<7C>G<EFBFBD><47>O<><4F>?e<>X<EFBFBD>k<EFBFBD><6B><EFBFBD>q<EFBFBD>Gt<7F><74>G<EFBFBD><47><EFBFBD><0B><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ȴ<EFBFBD>3<EFBFBD><33><EFBFBD><EFBFBD>/<2F><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><04><><EFBFBD>*<2A><><EFBFBD><06><><EFBFBD><EFBFBD>	<00>4<1A>"+<1F><><EFBFBD>,<2C><><EFBFBD><<3C><>?<3F><><EFBFBD>?<3F><><\<5C><><EFBFBD>_<EFBFBD>,ꇩ̉<EA87A9><CC89>JČ<4A>m<EFBFBD><6D><EFBFBD>jM<6A><4D>
<EFBFBD><EFBFBD><EFBFBD><EFBFBD>T<EFBFBD><EFBFBD>1<EFBFBD><EFBFBD><EFBFBD>]<5D>ѩ/ةa<D8A9>ߩ<EFBFBD>o<EFBFBD><6F><EFBFBD>f<EFBFBD><66><02>򩍿<EFBFBD><F2A98DBF><14><>[[<18>H^<1F>"<22>1<EFBFBD><31>ZC<5A><43>HE<48>+ϓ<><CF93><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>װ<EFBFBD>A<EFBFBD><41><EFBFBD>iMƪ<4D><C6AA>ͪ<EFBFBD>+تR<05><>o<EFBFBD>誥<EFBFBD><E8AAA5><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><03><> '<27>)<29>(<28>̓><3E><16>J<EFBFBD>cV<><56>q<>w<EFBFBD>v<EFBFBD><76>'w<><77>z<><7A>B<42><7F><EFBFBD><EFBFBD><EFBFBD>.ū<><C5AB>ǫ;<3B><><EFBFBD>]<1E><>$<24>K<EFBFBD>1<EFBFBD><31>3<>pc<<3C>?E<><45><EFBFBD>O<EFBFBD><4F>|X<>$P\<5C>)<29>~<7E>cƆ<63>9+<2B><><EFBFBD>><3E><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>W<EFBFBD><57><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ȬǦˬ_<CBAC>ܬ<EFBFBD><DCAC><EFBFBD><EFBFBD>b:<3A><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>$<24><12><><EFBFBD><12>&1<1F><>&<26><>p&<26>^(=<3D>;<3B>@<40><>H<><48><EFBFBD>l<EFBFBD>1/<2F><><EFBFBD>M<EFBFBD><4D>*(<28><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>4￭|ƭ[<5B><><EFBFBD><11><EFBFBD><00>h<0F>vM%<25><0F>Z<EFBFBD><04>[<5B><>Pj<50>l\w<><77><EFBFBD>w<EFBFBD><77><EFBFBD><EFBFBD><EFBFBD>xƮ0~<7E><><EFBFBD>
<0A><>z<EFBFBD><06>G<EFBFBD><0B><><EFBFBD><1E>_<EFBFBD>)<29>E07<30>:f<>}gg<67><67><EFBFBD>z<EFBFBD>\L<><4C>mS<6D><53><EFBFBD><7F><EFBFBD>np<6E><70>C-<2D><><EFBFBD>{<7B><><EFBFBD>뿯<EFBFBD>!ׯ|<7C>گd<19><><EFBFBD>;<3B><><EFBFBD>?<3F><><EFBFBD>B<EFBFBD>8zL<7A><4C>mU<6D>6hf<68><66>sn<73>!x<>9v<39><76>
<EFBFBD><EFBFBD>Fe<EFBFBD><EFBFBD>zXŰ<EFBFBD><EFBFBD>Ȱ{ְ<><D6B0>ڰHG<48><47>@#<23><><EFBFBD>a<EFBFBD><61><EFBFBD>{<7B><><EFBFBD>x<18>lJ <20><><EFBFBD>"<22><>
-<2D><1C>2<EFBFBD>C<EFBFBD>8<EFBFBD>6<<3C><>A<><41>C<>TQC<51>k<EFBFBD>G<EFBFBD><08>L<EFBFBD>WM<57><4D>_M<5F><4D><EFBFBD>O<EFBFBD><4F>U<>]V<><56><EFBFBD>W<EFBFBD>I<EFBFBD>]<5D>~<7E>h<EFBFBD>	<09>h<EFBFBD><68><EFBFBD>j<EFBFBD>#lq<6C><71><05><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><05><><EFBFBD><06><><EFBFBD>ȱEeױ<02>ױ<EFBFBD>yݱ<05><><EFBFBD>)<29>
<EFBFBD>o7<13>J<EFBFBD><19>c<EFBFBD>(<28><><EFBFBD><<3C><><EFBFBD>P<EFBFBD>\{R<><52><EFBFBD>R<EFBFBD>i;`<60><>~<7E>b<EFBFBD><EFBFBD><7F>׉<EFBFBD><D789><EFBFBD><EE97B2><EFBFBD><EFBFBD><EFBFBD>)<29><><EFBFBD>ٲ<EFBFBD>Q<EFBFBD><51><EFBFBD>m<EFBFBD><6D><EFBFBD><EFBFBD>h˲I<16><>HY<48><59>Q<EFBFBD><51><EFBFBD><1C><>4<06><>t<06><>'
<EFBFBD>o'<27><>.<2E><1C>?<3F>%<25>F<EFBFBD>c~<7E><>$<24><><EFBFBD>X<EFBFBD><58><EFBFBD><EFBFBD><EFBFBD><EFBFBD>J<EFBFBD><4A><EFBFBD>Dк<44>rwĳ<77><C4B3>ȳ<EFBFBD>볪<>
<0A><>G<13>Ʒ)<29>|,<2C>z<EFBFBD>7<EFBFBD><37>}S<>S<EFBFBD>U<EFBFBD>Lg<>ʌp<CA8C><70><EFBFBD>q<EFBFBD>r<><13>t<EFBFBD>n1v<31><EFBFBD>y<EFBFBD>-5{<7B>et<65><74><EFBFBD>:<3A><>h<EFBFBD><68><EFBFBD><EFBFBD>
<EFBFBD><EFBFBD><EFBFBD>B<EFBFBD><EFBFBD><EFBFBD>Q<EFBFBD><EFBFBD>ї<EFBFBD><EFBFBD>.<2E>ഗ\<5C><><EFBFBD>0<EFBFBD><30>]+<2B><><EFBFBD>`<60><><EFBFBD>G<07>,<2C><07>g
<EFBFBD><EFBFBD>P<12><><'<27><>
1<><31><EFBFBD>1<EFBFBD>eF<65><46><EFBFBD>S<EFBFBD><08>`<60>1<EFBFBD>b<EFBFBD><62><00><><1F><><EFBFBD>ı<EFBFBD><C4B1>z<><7A><EFBFBD>"ε<>ҵ<>ҵ<>ҵ׳ص<D7B3><06><><1A><><EFBFBD><EFBFBD><EFBFBD><08><>-<2D>E<EFBFBD>1<EFBFBD>I<EFBFBD>1<EFBFBD>L<EFBFBD>1<EFBFBD>O<EFBFBD>1<EFBFBD><31>N7<4E><37>u?<3F>5<EFBFBD>[<5B><><EFBFBD>`<60><>^e<><65><EFBFBD>q<EFBFBD><71><EFBFBD>q<EFBFBD><71><EFBFBD>q<EFBFBD><71><EFBFBD>q<EFBFBD>wr<><72>o<EFBFBD><6F>!<21><><EFBFBD>?<3F>ζ<EFBFBD>:ٶ<><D9B6><EFBFBD><EFBFBD><EFBFBD>'涛L<E6B69B><4C>+ﶺZ<EFB6BA><5A>Th<04><><EFBFBD>	<09>4<EFBFBD><0C>l-<1D><><EFBFBD>2<EFBFBD>rZH<5A><48><EFBFBD>j<EFBFBD>Hl<48><6C>s<><73>䆷<EFBFBD>M<EFBFBD><4D><05><><EFBFBD><EFBFBD>]<5D><><EFBFBD>D<EFBFBD><44><EFBFBD>С<EFBFBD><D0A1>S<EFBFBD><53><0E><><EFBFBD><EFBFBD>aķ<03>Ƿ`̷l̷3зز<D0B7><D8B2><EFBFBD><EFBFBD><EFBFBD><EFBFBD>`<60><><EFBFBD><EFBFBD><16><>`<1C>5/<1E>T<EFBFBD>#<23>U<EFBFBD>#<23>V<EFBFBD>#<23>P<EFBFBD>2<EFBFBD>Q<EFBFBD>2<EFBFBD>R<EFBFBD>2<EFBFBD>S<EFBFBD>2<EFBFBD>E<EFBFBD>2<EFBFBD><32><EFBFBD>2<EFBFBD><32><EFBFBD>=<3D><>;E<>{<7B>p<EFBFBD>j@<40><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>׬<EFBFBD><D7AC>8<EFBFBD><38><EFBFBD>F<EFBFBD>͸<EFBFBD>#<23><>F<EFBFBD><46><EFBFBD><05><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>s<05><>-<2D><>vE<76><45>AR<41><52><EFBFBD>T<EFBFBD><54><EFBFBD>T<EFBFBD><54><EFBFBD>T<EFBFBD><54><EFBFBD>\<5C>	<09>]<5D><><EFBFBD>^<5E><><EFBFBD>_<EFBFBD><5F>
c<><63>c<>d<EFBFBD>k<EFBFBD>d{<7B><>|<7C>X<><58><12><><EFBFBD>Q<EFBFBD><51><EFBFBD><EFBFBD>Ȱ<EFBFBD>Yd<59><64><EFBFBD>d<EFBFBD><64>`ٿ<>lٿ<6C><D9BF><EFBFBD>¹<EFBFBD><C2B9>¹<EFBFBD><C2B9>¹ֹ̪<CCAA>)׹Oڹ#=޹<>J<EFBFBD><4A>pK<70><4B>_<><5F>)q<><71><EFBFBD><EFBFBD><0E><><EFBFBD><<3C>O<EFBFBD>><3E><><EFBFBD>Q<EFBFBD>*<2A>]<5D><>ak<61>]͌<>F~<7E><>c<><63><EFBFBD>cº<12>ƺl*ֺo*ֺܡ<D6BA><DCA1><EFBFBD><EFBFBD><EFBFBD><EFBFBD>B<EFBFBD>	<09>`<60>
<EFBFBD><0F><1F><>3#<23>Z<EFBFBD>B<EFBFBD><42>^J<><4A><EFBFBD>o<EFBFBD><6F><EFBFBD>v<EFBFBD>`kx<6B>䧻Lh<4C><68>~<7E><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>.<2E><>l<EFBFBD>û_hϻ<68><CFBB>ϻ лP9򻻊<39><F2BBBB8A>[<5B><10><>g@<40><>p@<40><>NA<4E><41>nC<6E>%<25>D<EFBFBD><44>F<><1A>F<EFBFBD><46>JK<4A><4B><EFBFBD>M<EFBFBD><4D><EFBFBD>b<EFBFBD>)~<7E>Ա<EFBFBD><D4B1>˕<EFBFBD><CB95>W-ܗ<><DC97><EFBFBD><EFBFBD><EFBFBD><EFBFBD>=<3D><><EFBFBD>󨼂F<F3A8BC82><46><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>KʼV\ʼrWռn<D5BC>׼
/ؼ<>W⼅<57><E2BC85><EFBFBD>O<EFBFBD><4F><EFBFBD>w{<16><><EFBFBD><1B><><EFBFBD>=<3D><>T<>[Jo<4A>r<EFBFBD>u<EFBFBD>Pky<6B>X<><58><EFBFBD>L<EFBFBD><4C><EFBFBD><10><><EFBFBD>ӝ<EFBFBD>Jl<4A><6C><19><><EFBFBD><EFBFBD><EFBFBD>½<EFBFBD>ƽH]׽Iz<49><7A>m<><6D><EFBFBD>M<00><>|<0B><><EFBFBD><0B><><EFBFBD>0<EFBFBD>[<5B><<3C><>PP<50><07>U<EFBFBD>8l[<5B><>Mg<4D>JCl<43>so<73>F<EFBFBD>t<EFBFBD><74><EFBFBD>u<EFBFBD><75><EFBFBD><EFBFBD><EFBFBD><EFBFBD>R<EFBFBD><52><EFBFBD>ӌ<EFBFBD>OI<4F><49><EFBFBD>O<EFBFBD><4F>-<2D><><EFBFBD><0E><>iǾsX<73><58>vX徛<58><E5BE9B><EFBFBD><EFBFBD>N
<EFBFBD><EFBFBD><EFBFBD><13><><EFBFBD><14>/<2F><17>=[@<40><><T<><13>c<EFBFBD><63><EFBFBD>f<EFBFBD><66>+h<><68>Cu<43><75><EFBFBD>u<EFBFBD>><3E><><EFBFBD>Jۤ<4A>Ů<EFBFBD><C5AE><06>ǿi<C7BF>οb/ٿ(<28><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>?V<><56>*F<00><><EFBFBD><08><><EFBFBD>
<EFBFBD><EFBFBD><EFBFBD>
<0A>zs<0F>7<EFBFBD><1E><>1*<2A><><*<2A>n<EFBFBD>=<3D><>sD<73><U<><55>d<>Ud<55>
<EFBFBD>u<EFBFBD><EFBFBD><10><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><14><>
<02><><EFBFBD>;
<0A><><EFBFBD>
<0A>f<EFBFBD><1A>}~#<23>p<EFBFBD>M<EFBFBD><4D><EFBFBD>u<EFBFBD>@\<5C><>ܙ<EFBFBD><DC99>rܧ<72><DCA7><EFBFBD><EFBFBD><EFBFBD><EFBFBD>S<EFBFBD><53>2<>`<60>5<EFBFBD>~
6<>}<7D>;<>B<EFBFBD>aW<>iKZ<4B>f<EFBFBD>t<EFBFBD><04>w<EFBFBD>Aay¸<<3C>¶<EFBFBD><C2B6><EFBFBD><C29C><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>[<5B><><EFBFBD>@?<3F><><EFBFBD><1E>£<EFBFBD><C2A3><EFBFBD>J<EFBFBD><4A><EFBFBD><01>w:<05><><EFBFBD><16><>$ï<><1A>;<3B>'<27><>57<35>Z<>Q[ò<>iã<69>où|r<><72><EFBFBD>r<EFBFBD><14><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>t-<2D><><16><><EFBFBD>h<><68><EFBFBD>r<EFBFBD><72><EFBFBD><EFBFBD><EFBFBD><EFBFBD>z<EFBFBD><7A><EFBFBD><19><><EFBFBD>
 <20><><EFBFBD>%<25><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>T<13><0C>&<26>A')<29><><EFBFBD>N<EFBFBD><17>c<EFBFBD><63><EFBFBD>n<EFBFBD><19>u<EFBFBD>8<17><>݈<>H><3E><><EFBFBD><EFBFBD><EFBFBD>Ď6<C48E><36>Sp<53><70>0<EFBFBD><30><EFBFBD>{Q<>ĩ
<EFBFBD><EFBFBD><EFBFBD><12>Ķ<EFBFBD><C4B6><EFBFBD>)<29><><EFBFBD>l+<2B>ĸz<C4B8>Ĉ,<2C><>A><3E><>	ŵ<><03><><EFBFBD>
Ŋ<EFBFBD>Ő<><1E>h]"ŝ9'<27><><EFBFBD>4<EFBFBD>;J<>ޣf<DEA3><66>҃ŠS<C5A0><53>w	<09><>~<10><>EV<45>ŷy<C5B7>ż<EFBFBD><C5BC><EFBFBD><EFBFBD><14><>G<EFBFBD><47><EFBFBD><04><>Ź<04>5<EFBFBD><0C>><3E>Ʀ<>ƪ<><1D><02> <20>A<EFBFBD>%<25>J<EFBFBD>0<EFBFBD>;<3B>4<EFBFBD>-Q@<40><><EFBFBD>CƇ<43>P<EFBFBD>tY<>Ly<4C><79>̷<EFBFBD><CCB7>aS<61>ƒ-<2D><>@<05><>f<EFBFBD><66><EFBFBD><EFBFBD>8<EFBFBD>ư<EFBFBD><C6B0>ƝW<C69D>Ƣ<EFBFBD><C6A2><EFBFBD>м<EFBFBD><D0BC><08><>Ƌ<EFBFBD><C68B><EFBFBD>3<EFBFBD><33>ƨ<EFBFBD><05>ݭ
Ǻ<>6<EFBFBD><36>A<><41><EFBFBD>^ǣ\f<>Ăǽ<C482><C7BD><EFBFBD>{<7B><>8x<38><78>溷<EFBFBD>t<EFBFBD><74><EFBFBD><01><><EFBFBD>i^<5E><>5$<24>Ǻj<C7BA><6A><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><0B>Ǡw<C7A0>ǌ<EFBFBD><C78C><EFBFBD><EFBFBD>A-<2D>@59<35>cD<><18>F<EFBFBD><46>Qȵ2UȯFhȡDmȖjn<6A>؄r<D884>A<EFBFBD><41><EFBFBD>W<EFBFBD><57><EFBFBD>ΧȝV<C89D>ȃ<10><>
m<>ȉz<C889><7A><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>m<EFBFBD><6D><15><04>e0ɜEɲ^I<>StL<74>{Z<><04>]<5D>9h`ɯ<>`<60>p<C28B><70>s<>5<EFBFBD>x<EFBFBD>U<15><><EFBFBD>h<EFBFBD><68><EFBFBD><EFBFBD><EFBFBD><EFBFBD>]^<5E><>v<EFBFBD><76>ɹQ<06>kS<14><><EFBFBD><16>6<17>4<EFBFBD><17>s<EFBFBD>'<27><><EFBFBD>'<27>Y8ʸ<38>><3E>oauʘ<75>u<EFBFBD><75><EFBFBD>x<EFBFBD>0<EFBFBD><30>ʸ<EFBFBD><CAB8><EFBFBD>8<01><>0<7F>ʩ\<5C>ʷ<EFBFBD><CAB7><EFBFBD>ˣ<EFBFBD><CBA3>Z<EFBFBD><06><11>
<EFBFBD>@<40>'<27>'<27>,<2C><>}N˿<4E>Vˌ<56>_<EFBFBD>ʠr<CAA0>F~ˑ<><CB91><EFBFBD>S<EFBFBD><53><EFBFBD>$|<7C><><EFBFBD>ا<EFBFBD>pR<70><52>6<>˝<EFBFBD><CB9D><EFBFBD><EFBFBD>*<2A><>~<7E><><EFBFBD>^<5E><>,<2C><><EFBFBD>L<><4C>R<EFBFBD><52><EFBFBD>y;	<09>4<EFBFBD><19>/q5<71>c@̴<>H<EFBFBD>eVS<56>	lY̅ĝ̼<C49D><CCBC>̀<EFBFBD><CC80><EFBFBD>c<7F><63><EFBFBD><EFBFBD><EFBFBD>̎<EFBFBD><CC8E><EFBFBD>ZP<5A><50><1A><><EFBFBD>a	<09><>x͘<>/<2F>:2<><32>sW͔2^<5E><EFBFBD><C29D><EFBFBD>ٗ<EFBFBD>Ϙ<>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD><EFBFBD>͎<EFBFBD><CD8E>͎<EFBFBD><CD8E>͌<EFBFBD><CD8C><EFBFBD>/^<5E><>z<EFBFBD><7A>̀<EFBFBD><CD80>ͅB<CD85><42><EFBFBD>[<1F>h<EFBFBD>'<27><><EFBFBD>-οQ7<51>E<C294>%^HΔ<48>R΂<52>T<EFBFBD><54>t[Λ<>^Νxi<78>	j<><6A>k<>d<EFBFBD>m<EFBFBD>Q{<7B><>w<>Η<1E><><EFBFBD>-<2D>ξ<CEBE><7F>s<EFBFBD><73>΄ֵ<CE84><D6B5><15>Ν=<3D><>O<12>Γ<EFBFBD><CE93>Ί<EFBFBD><CE8A>δl<CEB4><6C><1D><><EFBFBD>;<1F><><EFBFBD><EFBFBD><04>1Dπ<>ϙz1϶<31>@<40><><EFBFBD>CςwWϠ<57>pϡ<70>pϣ<70>pϤ<70>pϦ<70>pϧ<70>pχw}<7D><1A>~<7E><><EFBFBD><EFBFBD><EFBFBD><18><><EFBFBD><EFBFBD>]<07>O<EFBFBD>Њ<>	<09><>t
<0A>o<EFBFBD><11><1F>(<28>(D<><44><EFBFBD>D<EFBFBD>{<7B>M<EFBFBD><4D>UO<55>gbO<62>
FU<46>I<EFBFBD>hСwo<77><EFBFBD>z<EFBFBD>q<0F><><EFBFBD><EFBFBD><EFBFBD>Ь<EFBFBD><D0AC>Г<EFBFBD><D093><EFBFBD>/U<>ЙZ<D099><5A><EFBFBD><EFBFBD><EFBFBD><EFBFBD>h(<28>Ъ(<28>Љ<EFBFBD><D089><EFBFBD>CC<43><43>U<EFBFBD><03><>{<08><><EFBFBD>	<09>j<EFBFBD><0E><16><>6<1C>l<EFBFBD>)<29>Y<EFBFBD>*Ѹ)/<2F>bD<><44><EFBFBD>J<EFBFBD>D<EFBFBD>J<EFBFBD><4A>aY<61><59><EFBFBD>Y<EFBFBD>V<EFBFBD>`<60><1E>|<7C>n<EFBFBD><EFBFBD>v<EFBFBD><76><EFBFBD><04><>ѥb<D1A5><62>
<0A><><EFBFBD><EFBFBD>t<EFBFBD><74>	<09><>ё?<3F>ѠU<D1A0>јj<D198><6A>]<16>ѐ<EFBFBD><D190><EFBFBD><1D><>ќX<11>.<2E> <20>;*7Ҳs;<3B><>?<3F><>|G҆L<><4C>POҗFRҹYґ<59>m<EFBFBD>~<7E>{<7B><><16>Ҳ<EFBFBD><D2B2><EFBFBD>.<0E>Ҕפқ<D7A4><D29B><EFBFBD>
<0A><><EFBFBD>V<EFBFBD><56><EFBFBD>(<28><><EFBFBD>Ķ<EFBFBD><C4B6>Ͷ<EFBFBD><CDB6>Ӷ<EFBFBD><D3B6>Զ<EFBFBD><D4B6>V<EFBFBD><56><EFBFBD>H<EFBFBD><48><EFBFBD>O<EFBFBD><4F><EFBFBD>X<EFBFBD><58><EFBFBD>Y<EFBFBD><59>Ҍ3<D28C>ҷS<D2B7><53>HW<48><57>=><3E><>z<EFBFBD>ӌ<>0Ӱ2<>[j4ӑ<34>=<3D>v@I<>#P<>=|\Ӏ~mӦZy<5A><79>+<2B><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>:ɚ<><1C><>ӋZ<D38B><5A>ˁ<EFBFBD><CB81>HI<48><49><02><><12><><EFBFBD>l<EFBFBD><6C>Ӥ<1F><><EFBFBD><EFBFBD><EFBFBD>ӿ<EFBFBD><D3BF><EFBFBD>'
<EFBFBD>˞<1E>3<EFBFBD>!<21>8<EFBFBD>$<24>!>)<29><><EFBFBD>5Է<35>;<3B>#ZMԤse<73>&hmԷzm<7A><6D><EFBFBD>|<7C><13><>԰H<D4B0><48>[<5B>ԇ8<D487>ԏ#<23><>LS<4C><53><EFBFBD>U<EFBFBD><55>r<0B><>*<2A><><EFBFBD>zX<7A><58>|K<><4B><EFBFBD>j<EFBFBD><6A>s<EFBFBD><73>ԡ<EFBFBD><01>B<EFBFBD><14>U<EFBFBD><1E><>7 <20>Ƙ)՛<>N<EFBFBD><01>U<EFBFBD><1B>Wՙ^Ր<>h՚<68><D59A><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>z<EFBFBD><7A>Ւ<EFBFBD><D592>ռ<EFBFBD><D5BC><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>R<EFBFBD>ָ<>֑<>֟<>)<29>Y<EFBFBD>4<EFBFBD>ß@<40>Z	C֮<43>G<EFBFBD>
Q<>~<7E><><EFBFBD><EFBFBD>Α<EFBFBD>[<5B><><EFBFBD>9<EFBFBD><39>֖<10><>F<EFBFBD><46><EFBFBD>_0<5F><30>.1<EFBFBD><EFBFBD>@b-<2D><>cC<63><03>T<EFBFBD>W3c<33>L%<25><><EFBFBD>/<2F>׬<D7AC>ש<EFBFBD><D7A9><EFBFBD>j5<6A><35>"x<><78>
<0A><>׬<EFBFBD><D7AC>׮<0B><><EFBFBD>U<EFBFBD><55><EFBFBD>-<2D><><13><><EFBFBD>G<EFBFBD><06>z<EFBFBD>.<2E><><EFBFBD>:<3A>
<0A>H<EFBFBD>]<5D>nأ<6E>u؈n{؆<>|<7C>Pd<50><64>GU<47><55><EFBFBD><EFBFBD><EFBFBD>؅(<28><>'Q<><51><EFBFBD><EFBFBD><EFBFBD><EFBFBD><06><07>xi<0F>[|B<>C
GٕX<>i_b<5F>t<EFBFBD>cٝ<63>n<EFBFBD>F
qٶ<71>v<EFBFBD>+|<7C>Ji<4A><69>&<1B>٩<EFBFBD><D9A9><EFBFBD>v?<3F>ٳ3<D9B3><33>Fո<46><D5B8>U<EFBFBD><55>f<17><>@<40><><EFBFBD>_<EFBFBD><5F><EFBFBD>MW<4D>ٺ<EFBFBD><D9BA><EFBFBD><0E>X<EFBFBD>&<26>>t3ڔ<33>L<EFBFBD>K<EFBFBD>O<EFBFBD><<3C>f<EFBFBD><66>~~<7E><><00>ږ͑<DA96><CD91><05>ڞS<DA9E><53>T<>ڒ<EFBFBD><DA92><EFBFBD><EFBFBD><1C><>EA<45><41><EFBFBD><EFBFBD><EFBFBD><EFBFBD>V<06><>b<EFBFBD><06><>&<07>C<EFBFBD><0C><><EFBFBD>۴۸<1A>A)۩<>/<2F><><EFBFBD>8ۥ<38>8<EFBFBD><38>9ۚa۱ps۲3<DBB2>۾<EFBFBD><DBBE><EFBFBD>0<EFBFBD><30><EFBFBD><13><><EFBFBD>&<26><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>d<EFBFBD><64>'<27><><EFBFBD><EFBFBD>#<23>ۋ7<DB8B>ۜ7<DB9C><37>08<30>ۏ:<06>t<EFBFBD>	<09>
<0A><18>T<EFBFBD><1C>/ <20>/ '<27>g<EFBFBD>)<29>y2<>h	4<>D#8<>G<EFBFBD>><3E>u+<2B><>E<14>ܺ<06><><EFBFBD><07>ܬ<0F><>Yz<59>ܭ_<DCAD><5F>MB<4D>ܭ<EFBFBD><DCAD>܇<EFBFBD><DC87><EFBFBD>@<40><>ܸ-<2D><><18><><EFBFBD>X<EFBFBD><58><03><00>]<5D><13>wl<1E>5K"<22><>P'<27>)&4<>2x:ݼ<>F<EFBFBD>c9S<39><0C>S<EFBFBD>>YY<59>|c<>Fur<75>Rurݛtݞ
wݩZ}ݗZ<DD97><5A>?<1B><><EFBFBD>ܫ<EFBFBD>5<0C><>v.<2E><><12><><EFBFBD><EFBFBD><C299><EFBFBD><05><><EFBFBD><0C><>(<28><><EFBFBD><0E><>ݙ<EFBFBD><DD99><EFBFBD><EFBFBD>/ެ<><18>%D/<2F><><EFBFBD>0<EFBFBD>"<22>2<EFBFBD>.3<>F<EFBFBD>@<40>d<EFBFBD>GޅKނ*`<60>E`<60>ҫk޶?z<>5<EFBFBD><35>ޒƆ޶<1D><>h<EFBFBD><68><EFBFBD>ī<EFBFBD>޽S<DEBD><53><01><><EFBFBD><10><><EFBFBD><16>+<2B>G<EFBFBD>7ߪ<37><DFAA><EFBFBD><EFBFBD>n<EFBFBD>ߋ|<7C><>M<EFBFBD><4D><EFBFBD>֗<EFBFBD><D697>{<7B><>ߜ1<DF9C><31>l2<6C>ߢ<EFBFBD><DFA2><EFBFBD>k<EFBFBD><6B><EFBFBD><EFBFBD>3<11><><EFBFBD><1C>	<09>%<25><>p2<70>l4<><34>AB<41><42><EFBFBD>[<5B><><EFBFBD>l<EFBFBD><6C><EFBFBD>q<EFBFBD><71>Cs<43><1A><EFBFBD>r<06><><EFBFBD>I<EFBFBD><49><02><><EFBFBD><EFBFBD>B<EFBFBD><42><EFBFBD>Q<EFBFBD><51><EFBFBD><EFBFBD>+<2B>3<EFBFBD>2<EFBFBD>u:<3A>k<EFBFBD>D<EFBFBD>اD<D8A7>ޯR<DEAF><52>?T<>{GT<47><04>T<EFBFBD>X[<5B><>?}<7D>1<EFBFBD><31><EFBFBD>BR<42><52><EFBFBD><18><>Q$<24><>U<EFBFBD><55><EFBFBD>D<EFBFBD><44><EFBFBD><EFBFBD><00><><1E><>ᮐ<EFBFBD><E1AE90><EFBFBD><EFBFBD><EFBFBD><EFBFBD><06><><EFBFBD><EFBFBD><0B><><EFBFBD>t<EFBFBD><74><01><>J<0E>Z<EFBFBD>+<2B>ϫ7<CFAB>7<EFBFBD>9<EFBFBD>f<EFBFBD>O<EFBFBD>ŰW<C5B0><57>yl⪙s<E2AA99>Ń<>|<04><><EFBFBD>m<EFBFBD><6D>Q<EFBFBD><51><EFBFBD><EFBFBD><00><><02><><EFBFBD><EFBFBD>!<21><><EFBFBD>;<3B><><EFBFBD>ɷ<EFBFBD><C9B7><1B><>ݘ<EFBFBD><DD98>I<><49><EFBFBD><1A><><EFBFBD>-<2D><>P#<23><>I<EFBFBD><1D>q<EFBFBD>'<27><><EFBFBD>+<2B>T<EFBFBD>0<EFBFBD><30>aR<61><52>pf<70><66><EFBFBD>p㓄w<E39384>\t{<7B>,0<>㜻<EFBFBD><E39CBB>4ü㧎<C3BC>㣨<EFBFBD><E3A3A8>1<><31><EFBFBD>b<01>ݻ<04>	/<0C><>95<39><35><EFBFBD>5<EFBFBD>	9<><39><EFBFBD>?<3F>"<22>A<EFBFBD><41>gB䶋M䱨h<E4B1A8><68>"p<><70>z<>.<2E>~<7E><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>.<2E><>(<><7F>	<09><>侇<EFBFBD><E4BE87>+<2B><><EFBFBD>gR<67><52>l<EFBFBD><6C><EFBFBD>p<><70><EFBFBD>,<10>^<5E><17>ـ<<3C>%K<>T>V<><56><EFBFBD>_<EFBFBD>/<2F>y<EFBFBD><0C>~<7E><>@<40><><EFBFBD>N<EFBFBD><4E>c<EFBFBD><63><EFBFBD>FE<46><45>^<5E><><EFBFBD><EFBFBD><16><><EFBFBD><1D><>ө<EFBFBD><D3A9><EFBFBD>?<3F><>M'<27><><1E><>2<07><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><1E><>(<28><10>,<2C>(!/浳;<3B><>{X晹d<E699B9><64><EFBFBD>n<EFBFBD><06>q<EFBFBD><1A>q<EFBFBD><71><EFBFBD>r<EFBFBD>Kt<4B><74>䣀<EFBFBD>\<5C><><EFBFBD><EFBFBD>K<EFBFBD><4B>C<><43>><13><>Y<EFBFBD><59><EFBFBD>X<EFBFBD><58><EFBFBD>!<21><><EFBFBD><EFBFBD>D<EFBFBD><44>u<EFBFBD><75><EFBFBD>U	矺<07><>1<0C><><EFBFBD><1F>46-<2D>B<>W<>bm<><02><>Q<EFBFBD><51><EFBFBD><EFBFBD>ʐ筿<CA90><E7ADBF><EFBFBD><EFBFBD><EFBFBD><EFBFBD>N<EFBFBD><4E><EFBFBD><EFBFBD>ޙ<EFBFBD><DE99>b<EFBFBD><62><EFBFBD>ί<EFBFBD>K
<EFBFBD><EFBFBD>
<EFBFBD><EFBFBD><EFBFBD><EFBFBD>p<EFBFBD>疡<EFBFBD><EFBFBD>ϓ<EFBFBD><EFBFBD><EFBFBD>q<EFBFBD><EFBFBD>G<18>粔<EFBFBD><E7B294><EFBFBD>}<7D><>w[<5B><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ϩ<05>w<1B><><EFBFBD>3<EFBFBD>s<EFBFBD>J<EFBFBD>)_]<5D>{h<>Km<4B>Ͼ<EFBFBD><CFBE><EFBFBD><16><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>*X<><58><08><>舺<EFBFBD><E888BA>q<EFBFBD><71><EFBFBD>}<7D><><EFBFBD>Qu<51><75><EFBFBD>]<5D><>3<EFBFBD><33><EFBFBD>^<5E><><EFBFBD><EFBFBD><EFBFBD>跪<1E><>'(<28><><EFBFBD>2<EFBFBD>F:<3A><><EFBFBD>I<EFBFBD>V<>_e<>űk<C5B1><6B>}l<><6C><EFBFBD>l<EFBFBD>6r<>Pru<72>鵁<EFBFBD><E9B581>0<EFBFBD><30><EFBFBD>b<EFBFBD><62><EFBFBD>5<EFBFBD><35><EFBFBD><0F><>N'<27><>DE<44><45>\<5C><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>WT<57><54>"<22><><EFBFBD>x$<24>齠<05><>
<0A><><EFBFBD><13><>[0<><30><EFBFBD>@<40><><EFBFBD>X<EFBFBD><58><EFBFBD>e<EFBFBD>q-<2D><>)Q<><51><EFBFBD><EFBFBD><EFBFBD><EFBFBD>|<7C><><EFBFBD>B<EFBFBD><42>ꊉ<EFBFBD><EA8A89><00><0E><><EFBFBD><1B>	<09>#<23><><EFBFBD>(<28>b<EFBFBD>1<EFBFBD><31>N8<4E>BzK<7A>Ek<><6B>wo<77><6F><EFBFBD><C282><EFBFBD><EFBFBD><EFBFBD>7"<22><><0C><><EFBFBD><12><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>i<EFBFBD><69><EFBFBD>\<5C><>#&<26>눦+<2B>u<EFBFBD>0<EFBFBD>S9<>C<EFBFBD>D<EFBFBD>q<EFBFBD>j<EFBFBD><6A>U{<7B>w<EFBFBD><77><EFBFBD><EFBFBD>3<EFBFBD><33>}<7D><>#ۮ<>l<01><>A*<2A><>~<7E><><EFBFBD>h<EFBFBD><68><EFBFBD><1F><><EFBFBD>N<01><>{%<25><><U<0B><><13><><EFBFBD>퀬,탬,<2C>J<EFBFBD>?<3F><><EFBFBD>B<EFBFBD><42>Fh<46><68>kh<6B>d<EFBFBD>j<EFBFBD>+<2B>r<EFBFBD><72>
u<>8k<38><6B><EFBFBD><10><>㉿<EFBFBD>
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>2<EFBFBD><EFBFBD><EFBFBD><EFBFBD><08><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>[<5B>
<0A><>2<><32><EFBFBD>6<EFBFBD>"(J<><4A>iQ<69>O[S<>U<>5<EFBFBD>]<5D><>f__<EEA6B1>S<EFBFBD>e<EFBFBD>n<EFBFBD>f<EFBFBD><66>k<7F>ɯ<EFBFBD><C9AF>P<><50>q$<24><><EFBFBD>n<EFBFBD><6E> l<><6C><EFBFBD><EFBFBD><EFBFBD><EFBFBD>)`<0C><>a<10><04><14>	S<15>A?<17><>'<27><>{8<><38>x<>ێ<EFBFBD><DB8E>/B<><EFBFBD><EF9A90>#&<26><>sC<73><43> <20><><EFBFBD><EFBFBD>{<7B><>f<EFBFBD><66><EFBFBD><EFBFBD><EFBFBD><02><19><02>ު<10><><11><>I'<27><><EFBFBD>]<5D>7\<>9<EFBFBD><39><EFBFBD>g<EFBFBD><67><EFBFBD><EFBFBD>7<EFBFBD><37>=<3D><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>C<EFBFBD><43><EFBFBD><04><><EFBFBD>
<EFBFBD><EFBFBD><1D>g@9<>
<EFBFBD>;<3B>><3E>><3E>q N<><05>S<EFBFBD><53>BT<42><54><EFBFBD>U<EFBFBD><55><EFBFBD>[<5B><><EFBFBD>d<EFBFBD>$k<><6B><EFBFBD>t<EFBFBD>c<EFBFBD>u<EFBFBD><75>m<EFBFBD><6D>ȸ<EFBFBD><C8B8><EFBFBD>%<25><><EFBFBD>ʨ<EFBFBD>pש<70><1D><><EFBFBD>4<03>w<EFBFBD><14>/<2F><1A><><EFBFBD><1F><><EFBFBD>W<EFBFBD><57>1h<31><68>Pl<50>4<EFBFBD>x<EFBFBD><1C>y<EFBFBD><79><EFBFBD>{<7B><>,<>W1<57><31><EFBFBD>L<EFBFBD><4C><1A><>h)<29><><EFBFBD><10><><EFBFBD>#<23><><EFBFBD>S<EFBFBD><53>?<3F><>u<EFBFBD><75><EFBFBD><EFBFBD>
<EFBFBD><EFBFBD><EFBFBD><12><19>4<EFBFBD><34>SS<53><53><EFBFBD>j<EFBFBD>qp<71>d<EFBFBD>s<EFBFBD>ssy<73><79><EFBFBD><EFBFBD><EFBFBD>A<EFBFBD><41><EFBFBD><EFBFBD>[<5B><>6<><36>9<03><><EFBFBD>ֵ<EFBFBD>
<0A><><EFBFBD>v<EFBFBD><76><EFBFBD>n¼<6E>uB<75><42>	<09><><EFBFBD><EFBFBD>@<40><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><00><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>;<3B><><EFBFBD>8<EFBFBD><04><><EFBFBD><1B>9E<>}O<><4F><EFBFBD>Q<EFBFBD>PU<><55><EFBFBD>U<EFBFBD><55>w_<77>'<27>j<EFBFBD>x<EFBFBD>m<EFBFBD><6D><EFBFBD>|<7C><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>4<EFBFBD><34><03><><EFBFBD><EFBFBD><08><>k<><6B><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>~<7E><>;I<><49><EFBFBD><0C><><EFBFBD>I<EFBFBD><49><1F><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>%<25><><EFBFBD><EFBFBD><03><>C
<EFBFBD><EFBFBD><EFBFBD><0C><><EFBFBD><15>5?<1D>)V*<2A>m<EFBFBD>3<EFBFBD><<3C><14>B<EFBFBD><42>E<>_|U<>M<EFBFBD>W<EFBFBD><57><EFBFBD>X<EFBFBD><58><EFBFBD>f<EFBFBD><66>;g<>:<3A>x<EFBFBD><78>ѐ<EFBFBD><D190>
<EFBFBD><EFBFBD>b<EFBFBD><EFBFBD><EFBFBD><EFBFBD>`<60><>Fk<46>v>l<><6C><EFBFBD><EFBFBD><EFBFBD>y<0B><><\<5C><><EFBFBD><19><><EFBFBD>	<09><>h/<2F><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>/n<><6E><EFBFBD>r<EFBFBD><72><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>J<EFBFBD><4A>%<25><><EFBFBD><EFBFBD><08><>E<EFBFBD><45><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><05><>5<><35><EFBFBD><EFBFBD><07>r6<0F><><EFBFBD><10>M<13><>M<17><><EFBFBD><1C><><EFBFBD>(<28>=<3D>D<EFBFBD><44>lN<6C>AAa<41><61><EFBFBD>e<EFBFBD>d<EFBFBD>k<EFBFBD><6B><EFBFBD>n<EFBFBD><6E>Vw<56><77>1~<7E>d<EFBFBD><64><EFBFBD>V^<5E><>
<1A><><EFBFBD>j<EFBFBD><6A><EFBFBD> <01><0C>"<22><><EFBFBD>$<24><>%<25>&D<>pK<><4B>'O<><0F>R<EFBFBD>A<EFBFBD>S<EFBFBD><53>]<5D><><EFBFBD>_<EFBFBD>uT`<60><>w<>v<EFBFBD>w<EFBFBD><77>|<7C>/<2F><><EFBFBD>+<2B><><EFBFBD><EFBFBD>!<21><>8<><38>Dz<44><7A>6<02><>l[<5B><> U<><55>*<2A><><EFBFBD>L<10><>h&<26><><EFBFBD><EFBFBD>
<EFBFBD>)<29>C<EFBFBD><43><EFBFBD>H<EFBFBD>b<EFBFBD>S<EFBFBD><13>w<EFBFBD><77>%<25><><EFBFBD>3<EFBFBD><33><EFBFBD>4<EFBFBD><34><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>&<26><><EFBFBD>\<5C><><EFBFBD><EFBFBD><0E><><EFBFBD>:)<29><><EFBFBD>-<2D><><EFBFBD>-<2D>P<EFBFBD>1<EFBFBD>`<60>M<EFBFBD><4D><EFBFBD>U<EFBFBD>ʖX<CA96>*Wi<57>5Bl<42>*Ir<49>BHy<48>7wy<77>+<>]~<7E><><EFBFBD>u<EFBFBD><75><EFBFBD>i<EFBFBD><69><EFBFBD><11><><EFBFBD>L<EFBFBD><4C><EFBFBD>q<EFBFBD><71><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>V<EFBFBD><56>I@<40><>*<08><><EFBFBD><02>A<02><05><><EFBFBD><0B>C<0F><><EFBFBD><14><0E><17>gSA<53>pM<>)U<>11Y<31>+<2B>r<EFBFBD>Y<EFBFBD>u<EFBFBD>fT<66><54>`f<><66><EFBFBD>C<EFBFBD><43><EFBFBD>7<EFBFBD><37><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>H<EFBFBD><48><EFBFBD>e<EFBFBD><65><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>a<EFBFBD><61><EFBFBD><EFBFBD><EFBFBD><EFBFBD>{<7B><><EFBFBD><EFBFBD>2<EFBFBD><32>s<EFBFBD><73><EFBFBD><EFBFBD><15><><EFBFBD>{<02>l<03>m<03>n<03>3y
<0A><>$<24><><EFBFBD>/<2F><1C>H<EFBFBD><48>nQ<6E>mS<><1E>[<5B><><EFBFBD>^<5E>:oq<6F><71>b<EFBFBD><62><EFBFBD>݉<EFBFBD><DD89>Ў<EFBFBD><D08E><EFBFBD><EFBFBD><EFBFBD><EFBFBD><11><>$<24><><EFBFBD>X<EFBFBD><58><EFBFBD>Z<EFBFBD><5A><EFBFBD>p<00><>(<28><><EFBFBD><EFBFBD>]<5D><><EFBFBD>z<EFBFBD><7A>77<37><37>Ǯ<01>PS<1F>	<09><<3C><><EFBFBD>N<EFBFBD>tO<74><4F> P<><50><EFBFBD>P<EFBFBD><50>WV<57><56>_<>rb<><1C>~<7E>l<EFBFBD><6C><EFBFBD>E+<2B><><18><><EFBFBD>*<2A><><EFBFBD>b<13><>1ֱ<31>O<EFBFBD><4F><EFBFBD>D<><44>><1F><><EFBFBD>|<7C><><EFBFBD>"<22><>ԑ<01><06><05><>7<>n	F<>U<EFBFBD>j<EFBFBD><6A>Ò<EFBFBD>k<><6B>/<2F><><EFBFBD><EFBFBD>y<EFBFBD><79><EFBFBD><EFBFBD><EFBFBD><EFBFBD>w<EFBFBD><77><EFBFBD><EFBFBD><19><><EFBFBD>(<28>W<EFBFBD>+<2B><>8<><38>F<><46><EFBFBD>U<EFBFBD>%,i<>z<EFBFBD>y<EFBFBD>(<28><><EFBFBD><EFBFBD>œ<EFBFBD><C593>+<2B><>e<08><>Կ<EFBFBD><D4BF>M<03><><EFBFBD>(<28><>q<EFBFBD><71><EFBFBD><EFBFBD><EFBFBD><00>-<00><>z<>$<00><>=4<>M)<29>XrYasY<00>tY<00>tY<00>1[n)_9sO<08>ߔ<><00><15><00>4<EFBFBD>蝶AI<41><00><0E>.<2E><>Hs<48>~<7E>$<24>MU+<01>.<01>=&K<01><><EFBFBD>m<><6D><01><0F>晍<1E><>y^<5E>k<><6B><01>.<2E><01>n<EFBFBD><01>c<EFBFBD><01>o<EFBFBD>4r<34><01>M<11>y<>
{Z<02><><02>
*<02>`=H<>J},Kg;T<02><>[|E_<02>wbz<>f<02><>z<02><><EFBFBD>ԥ<02>a<EFBFBD>\%<25>X;<3B><02><><EFBFBD>,$<24>Qe<51>z<><7A><02><><EFBFBD>V<>-fD,D<03><>J<03>5M<03><>Mc<>P^
Z j<03><>k!<21><><03>E<EFBFBD>PA<50><03>8<EFBFBD><03><><EFBFBD><03><07><01><><03>U<EFBFBD>=
8^<04><>53<>K<04>WQ<04>WQ+jsc<><63><04><14>g<><67><04>o<EFBFBD>+<2B>	%!l$<05>l$Ũ-ƨ-Ǩ-:<05><>=<05>Dw<05>`<60><05><><EFBFBD>?аd0<64><05><><EFBFBD><05><><EFBFBD>Q9<51><05><16>[<5B><><05>e<EFBFBD>J<><4A>;<3B><><05>nN<06>$p<17>p<>J$<24>b<00>k<06>]<5D><<3C><>=<3D><>><3E><><06>)<29><06>c<EFBFBD>t۶(<28><><06>+<2B><06><><EFBFBD><06><><EFBFBD>\<5C>u/<2F><06>dP|P<>"<07><>0w<>4w<>><07><>><07>I.KT<07>e\<07>Rn<17>z<07><10><07><><EFBFBD><07>ݯel<65><07>i<EFBFBD>Q<><07><><EFBFBD>K<><4B>u<><07><><08>i w<>3,;<08>-S<08><>]<08>[<5B><08>ЌM><3E><1D><08><><EFBFBD><08><06>ae<61><08>I<EFBFBD><08><1D><08>+<2B><08><03>jp<6A>.<2E><>G]<5D>il	<16>	7)	<10>	<09><>	0!	<09>o#	?	#x?	<09><>Q	-NZ	<09>QZ	s<>|	<09>Հ	4:<3A>	5<><35>	Ϙ<>	<09><><EFBFBD>	<09><><EFBFBD>	ޜ<>	<13><>	<09><><EFBFBD>	-<0B>	ι<>	ư
|
<EFBFBD><EFBFBD>
<EFBFBD>p-
<EFBFBD>I
<EFBFBD><EFBFBD>^
<EFBFBD>g
Idp
	<09>s
24<EFBFBD>
<EFBFBD>f<EFBFBD>
<EFBFBD>*<2A>
6<>
<EFBFBD><EFBFBD><EFBFBD>
<EFBFBD>-<2D>
-L<>
<EFBFBD><EFBFBD>/<0B>u:<11>I<0B><>iv~N<><4E><1A><>&<26><>ػ<><0B>χPۇQ<><51><07><><0B><04>R<05><0B><11><0B><11><0B><11>i<14>n<14>~<14><14><0E><><0B><EFBFBD><0B><EFBFBD>^<5E>;<3B><><0B><><EFBFBD><01><><0B>6<EFBFBD><01><><0B><11>^m-<2D>	<0C><>
<0C>x&<0C>x&<0C>x&<0C><>*vYGb<>W<0C>X]t<>f<0C><>g<0C><oxуߩ
<0A><>;.<2E> <20><><04><1B>ə<>T<><54><0C><><EFBFBD>e<>
<0A><>
<0A>t
<0A>l
e~
<0A>
"
`7
`7
`7
`7
<0A>9
<0A><>@
=<3D>C
R<>G
7<>Q
H<>S
<0A><>X
:<3A>X
<0A>Zb
<0A><>b
<0A><>i
<0A><>l
9Mm
<0A>n
<0A><>t
jX<6A>
<13><>
'K<>
<0A>Q<EFBFBD>
Q1<51>
<0A>=<3D>
<0A><11>
<0A><><EFBFBD>
<0A><><EFBFBD>
<0E><>
<0A><><EFBFBD>
<0A><><EFBFBD>
`<60><>
e<><65>
a-<2D>
o<><6F>
Q<><51>
<0A><><EFBFBD>
a<><61>
R<><52>
d<><64>
<0A>K<EFBFBD>
<0A><><EFBFBD>
0<>
|:<3A>
<0A>Kt
<0E>UcxD<0E>xD<0E>CF<0E>CF}<7D>H<0E>{`f"n<<3C>z<0E>V<EFBFBD><0E>J<EFBFBD>$#<23><1D><>9S<39>Wl<57><19><0E><><EFBFBD><0E><13><0E><><EFBFBD>r<>iW<69>.<2E><0F><><0F><>9<>+G<>A<0F>$P

T<0F>0UAvZ<0F><>[
p<0F>x<<3C>y<0F><>~l<><6C><0F>\<5C><0F><><EFBFBD>08<30>18<31>28<32>+<2B>Ow`g<10>Z<10>H!(<10>;+3t<>Mt[<10><>[H<><48><10>֠<10>ӧL<><4C><10><1D>%<1D>8<><1F><11>l$<11>x(g<>(<0C>/<11> ;I<>L^'W'-jQ<><51>Fފ<18><>e<03>c<><63><11>q<EFBFBD><11>@<40>"<22><11><><EFBFBD>D<><44>K<><4B><11><> i<>5<12><>QY<>SZ<>S[<5B>SD<>^9<>_`<60>a<11>t<12><><EFBFBD><12>)<29><12>j<EFBFBD>?<3F><>'<27><12>.<2E>q.<2E>w<><12>"<22><12><>B<13>?h<13><>p<13><>|+<2B><>lC<6C><13>I<EFBFBD>:<3A><13><><EFBFBD>rp<72><13>|<7C><13>;<3B><13><><EFBFBD>4<><34><13>b<EFBFBD>4<><34>ZOd
<14><><15>5<14>C<<14><>F<06>I<14><>NlZ<01>\sHi<14>kj<14><>ns~'<27><14><><EFBFBD>%ؓ<14><18>7<><37>
<EFBFBD>u<><75><14>i<EFBFBD><14>	<09><17><14>d
<15><15>'<15><> <15>345<>=<15><>B<15>YJ<15><>Z<<3C>oewx<15><>xm<><6D><15>S<EFBFBD><15>7<EFBFBD>ś<><02><><15>֝><3E>4Q<34>U<><55><15><><EFBFBD><15>װp9<70><15><><EFBFBD><0F><><15> <20>ce<63><03>{<16><><0C>	<16>|y!:<16>o9<16>S;<16>@D=R䎈ވ<><16><><EFBFBD><16>5<EFBFBD>c<><63>e=<3D><16><><EFBFBD>26<32><16><><16>\<5C><16>u<EFBFBD>(<28><17><>M<17>wi<17>GpS<>pC<>q<17>l<EFBFBD><17>{<7B><17><0C><17>1<EFBFBD><17>ۥ<17><><EFBFBD><17>w<EFBFBD><17>x<EFBFBD><17>z0z<18><>M<18>uY<18><>t<18><>t<18><>t<18>\<5C><18>;<3B>E<><18>	<09><18><1D>b<><62><18><><EFBFBD>إ<>lO<6C><10><19><19>"<19>S2<19><>6)<29>D<01>DºbW<>cݘkpvv<19><1A><19>P<EFBFBD>LS<4C><19><><EFBFBD><0B><19>M<EFBFBD><19>-<2D><19><><EFBFBD><19>N<EFBFBD>Fg<46><19>?<3F><04><><19><><EFBFBD>0o^bB<1A>v<1A><><1A><>4K9<1A>~W.vlA<>r<1A><><EFBFBD>v<><76>ܞ<1A>Q<EFBFBD><1A>
<0A><1A>2<EFBFBD><1A>_<EFBFBD>S<><53><03>
n<>k<><11>%<1B>:,-<1B><>0<1B>{4<1B><>6<1B><>BP<>E<1B><>QV̥Y4<>kYt<1B><>{<1B><><EFBFBD>7<> <20><>_<><5F>>Ū<1B><07><1B><><EFBFBD><1B><><EFBFBD>,<2C><><1B>&<26>[o<><1B>+<2B>e<01><1B><>Ֆ<1C><>
3) <20>/F<>4k6<1C><>:<1C>,;<1C>A<1C><>R<16>a"<22>dQ<><1C>׃
<EFBFBD><EFBFBD>W<><57>a<><61><1C><><EFBFBD><1C><><EFBFBD>N<>#M<><1C>H<EFBFBD><1C><><EFBFBD>9<><39>W<>%a<><1C><1D>v
`V϶iQS<1D><>SZ<1D>}`o<>m<1D>on$pt_x<1D><>|Y<0F><1D>H<EFBFBD><1D><><EFBFBD><1D><><EFBFBD>@<04><1D><><EFBFBD><1D>#<23><15>XW<58><1D>Y<EFBFBD><1D><><EFBFBD>h_<1E><>3.19X<>@c<>@<1E><>[<1E><>e<1E><>lcHm<1E><>q<1E><>u$<24><>LϚu_<75>߀<><1E><><EFBFBD>4mL<>)޻6R<>9<1F><>=v<>LScY<1F><>]	<09>bf<1F>t&ً<06>$v<><1F><><EFBFBD>m<><6D>y"<22><1F>U<EFBFBD><15><><1F>R<EFBFBD>|<00><1F><> <20><> m<> T( }+ <20>K: <20>T; <20><>B <20><>V <20><>a /m "Xn <20>?o <20><>q <20>=w $<24><> n<><6E> <20><<3C> Cȷ <20><><EFBFBD> <20><><EFBFBD> 0<><30> zS!R<>
!<21>V(!rC!<21>I!`pL!~<7E>N!<01>S!xx!~-}!!3<><33>!+<2B><>!<21>*<2A>!<21><><EFBFBD>!<21>m<EFBFBD>!<21>ݪ!z<>!<21>O<EFBFBD>!<21><><EFBFBD>!<21>V<EFBFBD>!2J<32>!w<><77>!*X<>!<21><>"޼	"<0F>,"<22>/2"j2"<19>2"<1F>Q")Z"<22>;j"d<1B>"WӚ"<22><><EFBFBD>"<22>/<2F>"<22><><EFBFBD>"<22>y<EFBFBD>"<22><>#PI#J<>##<23><>@#dqA#<23>-G#<06>M#h<X#<23>/d#\j#<23>Mo#<23><>r#<23><0F>#<23>h<EFBFBD>#<23>&<26>#j<04>#<23>m<EFBFBD>#<23><><EFBFBD>#fJ<66>#l
$<24>`$W<>$8&$}[&$<24><>8$<24>)G$<24><>V$<24><>w$<24><>x$<24>-<2D>$"<22>$<24><><EFBFBD>$<24><><EFBFBD>$<24><><EFBFBD>$<24>=<3D>$<24><0E>$<24><><EFBFBD>$<24><><EFBFBD>$<24>;%<25>&%9<>'%^(%h<>2%*<2A>>%B+F%̓O%A<>X%<25>=\%3no%/J<>%Q><3E>%Q<><51>%<25><><EFBFBD>%<25><><EFBFBD>%T<><54>%t.&,$&<<3C>:&<14>I&<26>Q_&fd&<26>ag&'}k&ݻ|&<0E>&Ur<55>&<0C>&<26><><EFBFBD>&c<>&y/<2F>&{B<>&<26>;'<27><>'<1C>'.%'<13>-'<27>E0'<27>{<'<27>L'<0B>P'bR'<27><>W'{'f'<19>r'<27><>r'&<26>t'<27><><EFBFBD>'<27><><EFBFBD>'<27><><EFBFBD>'<27>Ѳ'<16><>'<27>,<2C>'<27><><EFBFBD>'<14>'{U<>'<27>O(<28><>	((;(U?-(t<>5(HkG()2S(6j(<28>x(<28>f<EFBFBD>(J/<2F>(Qf<51>(Pb<50>(<28><><EFBFBD>(,<2C><>(uF<75>(<28><><EFBFBD>(<28>_)E)a\)P))8<>?)<29><>E)<29><>M)<29><>R);<3B>i)<29>Os):~)<29><><EFBFBD>)<29><08>)<17><>)Z<>)<29>m<EFBFBD>)<29><><EFBFBD>)p<><70>)<29><><EFBFBD>)<29><>.*<2A>7*5d<*ݷ>*<2A><>>*~D*vt*><3E><>*%<25><>*!x<>*<2A><><EFBFBD>*
<EFBFBD><EFBFBD>*&#<23>*F"<22>*n&<26>*<2A><03>*P<><50>*6<04>*#s+.{+<2B>}+ՠ+B<>+F<>+<2B><>+<2B>&+<2B>$.+<2B>@+
U+ba+<2B><><EFBFBD>+<2B>&<26>+c<14>+<04><>+<2B><><EFBFBD>+<2B><>,<2C>",se$,9%(,<1D>/,<16>J,Q6M,<2C>
U,mYX,Z<>Z,<2C><>`,<2C><>e,y<>r,<2C><>t,vy,܌<>,<2C>m<EFBFBD>,<2C>s<EFBFBD>,<2C><><EFBFBD>,<2C>?<3F>,<2C>-<2D>,<2C><><EFBFBD>,<2C><><EFBFBD>,<2C>&<26>,Ys<59>,<2C><16>,<2C>M<EFBFBD>,<2C>+<2B>,<2C><><EFBFBD>,<2C><>-<2D><>-(-E.-<2D>78-I<>>-<2D>8@-<2D><>D-<07>L-1<>O-/ve-L<>e-<2D>-a<><61>-<2D><><EFBFBD>-D<><44>-<2D>!<21>-<2D><15>-:I<>-<0B><>-<2D>X<EFBFBD>-0Y<30>-h7<68>-<2D><><EFBFBD>-<2D><><EFBFBD>-<2D><1F>-4<><34>-<05><>-5.,'.<2E>x,.<0C>4.<2E>R;.,<2C>O.<2E><>l.~<7E>t.q<>v.<2E>#<23>.b\<5C>.^<5E><>.<2E>f<EFBFBD>.<2E>џ.7Ա.<12><>.<2E>*<2A>.<2E><><EFBFBD>.<13>.G4<47>.<2E>R<EFBFBD>.<2E><02>.<2E>(<28>.4/<2F><>=/%<25>G/<2F>W^/<2F>t^/<2F>Ce/^Jw/<2F><>~/1<><31>/<2F>K<EFBFBD>/<2F>><3E>/<2F>O<EFBFBD>/I<><49>/<2F>a<EFBFBD>/Ǽ/<2F><><EFBFBD>/9<>/<2F>?<3F>/Zw<5A>/<2F>(<28>/t<><74>/<2F><>0xt0p0	4:0w<0\W0~<7E>[0<07>c0!<21>e0KC<4B>0m<30><6D>0<EFBFBD>@<40>0<EFBFBD><30><EFBFBD>0<EFBFBD><1E>0W<30><57>0N<18>0<EFBFBD><30><EFBFBD>0<EFBFBD><30><EFBFBD>0<EFBFBD>
1<><31>1U<31>.1>11UB1<42><31>P1N<31>Y1<59>Zb1<62><31>z1<7A>Ɩ1Ġ<31>1<1D><>10<31><30>1$<0B>1ޓ<31>1~<7E><>1<EFBFBD><31>
2<EFBFBD><EFBFBD>
2`K!2<00>'2<><32>,2<><32>32~<7E>=2i<32>F25<32>U2<55><32>i2S.r2;<3B><>2<EFBFBD>d<EFBFBD>2
}<7D>2<EFBFBD>Y<EFBFBD>2<EFBFBD><32><EFBFBD>2<EFBFBD>׸2<D7B8><01>2?<3F>2<EFBFBD>?<3F>2<EFBFBD><0E>2<EFBFBD>.<2E>2&<26><>2S3<><33>	3<><33>3|<7C>3az3<>793<39><33>H3M^3<16>o3i<33>}3<><33><EFBFBD>3<EFBFBD><33><EFBFBD>3<EFBFBD>k<EFBFBD>3Z<10>3+<2B>3<EFBFBD><33><EFBFBD>3<EFBFBD>/<2F>3<02><>37<33><37>3<EFBFBD>e<EFBFBD>3<EFBFBD><33><EFBFBD>3<EFBFBD><33><EFBFBD>3<EFBFBD><33>4q<34>4x<34>4%<25>74a<34>94:<3A>A4<41>,M4W<34>^4e<34>f4<66><34>i4 :u4<75><34>|4<><34><EFBFBD>442<34><32>4<EFBFBD>R<EFBFBD>4<EFBFBD><34><EFBFBD>4K<7F>4<02><>4<EFBFBD>?<3F>4<EFBFBD>V<EFBFBD>4<EFBFBD>(<28>4<EFBFBD><08>4;v<>4<EFBFBD>A<EFBFBD>4'.5<>5<><35>55<>z!5<><35>%5<><35>%5<><35>%5<><35>+5<><35>/5<><35>/5Ro05ֺ35H$_5b5<62>[{5><3E>|5dn<64>5<EFBFBD><35><EFBFBD>5<EFBFBD><35><EFBFBD>5<EFBFBD><35><EFBFBD>5<EFBFBD><35><EFBFBD>5<EFBFBD>T<EFBFBD>5<EFBFBD><35><EFBFBD>5<08><>5M6<>R6qT6<>Rx6<78>`x6-<2D>}6d<36>~6	ډ6we<77>6<EFBFBD><36><EFBFBD>6<06><>6+j<>6<EFBFBD>m
7<>=75<37>:7<08>O7<4F><37>S7<53>xW7<57>ae7]l~7j<37><6A>7<EFBFBD><37><EFBFBD>7<EFBFBD><37><EFBFBD>7YF<59>7i<37><69>7~<7E><>7<EFBFBD><37><EFBFBD>7!<21><>7<EFBFBD><37><EFBFBD>7h<1E>7<EFBFBD>$<24>7<EFBFBD>><3E>7<EFBFBD>q8f8<>'08<30>'08<30>'08<30>'08bw98j<80JJ8<4A><38>N8<4E><38>l8[<5B>u8`<0C>8<EFBFBD>Ӵ8
<16>8<EFBFBD><38>9<><39>
9<>S9<><39>)9
-G9?<3F>t9<74><1F>9<1D><>9<EFBFBD>*<2A>9=<10>9`<60><>9<EFBFBD>n<EFBFBD>9<EFBFBD>x<EFBFBD>9^?<3F>9:W<>98<39>-:U<>4:j<>S:$<24>h:<3A><>r:<3A><><EFBFBD>:R{<7B>:<3A>H<EFBFBD>:`ڸ:<3A><><EFBFBD>:<3A>^<5E>:<3A>P<EFBFBD>:<h<>:<14><>:<3A><10>:<3A>\<5C>:Ug<55>:5;щ&;<3B><>);<3B><>3;<3B>bP;JNS;<3B>W;<3B>7[;5no;<04>z;<3B><16>;<3B>D<EFBFBD>;nŇ;/<2F><>;<3B><0F>;<3B><EFBFBD>;ty<74>;d<><64>;<3B><><EFBFBD>;v<><Ea<<3C>I/<<3C> 8<a<>?<]<5D>H<V<>z<<3C><>~<<18><<3C>1<EFBFBD><<3C><><EFBFBD><<1F><><<3C>r<EFBFBD><`<60><~<0B><<3C>g<EFBFBD><<3C>g<EFBFBD><<3C>g<EFBFBD><J<><4A><~5==LB	=l<>=<3D><>=D==*t4=)O9=<3D><=%<25>G=<3D>'M=WoW=cZ=<06>q=<3D><>q=<3D>jx=<3D><>{=q<>{=<3D>Č=<18><>=%5<>=<3D><><EFBFBD>=<3D>\<5C>=J<><4A>=n<><6E>=|<7C><>=.<2E><>=MX<4D>=<3D><><EFBFBD>=<o<>=<1F>>><3E>><15>>}<7D>.>"5>d5><3E>BU><3E>H]><3E>2`>E<>e><3E><>h>``r>:<3A>s>,7<>><3E>֬><3E>r<EFBFBD>><3E>t<EFBFBD>>o<<3C>><3E><><EFBFBD>><3E><><EFBFBD>><3E>H?<3F><>>?=nR?B\j?7<>r?%Ez?(Ђ?<17><>?D<<3C>?y<><79>?<3F><><EFBFBD>?<3F><><EFBFBD>?<3F><><EFBFBD>?y<08>?<12>@<40><>
@_<>@lD@1'@	mB@<40>%G@ilJ@^}@<17>@<40><01>@Nz<4E>@ϭ<>@<40><><EFBFBD>@Z<0B>@<40><14>@<40>H<EFBFBD>@po<70>@<40>+
A<EFBFBD><EFBFBD>
A<EFBFBD><EFBFBD>A<>L'A<1B>.A<07>>A<>?A<>?A!?A<>?A<><41>DAO2GA
jVA<56><41>xAn|A<>d|A<><41><EFBFBD>A<01>A<41>A<EFBFBD><41><EFBFBD>Au'BT	Bg\Bg<42>B<>	!B<><42>&B<><42>8BAIB<49><42>]B<>#_B<5F>0oB<00>rB9<42>zB	^B$<24>BS<>B<EFBFBD><42><EFBFBD>B<EFBFBD><42><EFBFBD>B<EFBFBD><42><EFBFBD>B<EFBFBD>/CY<43>)C0<43>*CL<43>+C<>~8C<C<>=C<>;QC?URCdCfijCwtqC||{C<><43>|Cs<43><73>C<EFBFBD><11>C<EFBFBD><43><EFBFBD>C<EFBFBD><19>CV<43><56>C<EFBFBD>ԢC<D4A2>w<EFBFBD>C<EFBFBD><43><EFBFBD>Cr<43><72>Cc$<24>C<EFBFBD>/<2F>C'<27>D><3E>D<><44>DlD<><44>&D<>ID	0QD.<2E>QD֩VDR<44>yDi<44><69>D<EFBFBD>ۚD<DB9A><44><EFBFBD>D@<1D>D%<05>D\M0EV<45>0E<16>0E<30>C1Ex<45>FE`;IES[E<01>_EhEJ<45>sE@c<>Em<45><6D>E<EFBFBD><45><EFBFBD>E<EFBFBD>@<40>E8<>Ea<45><61>E<EFBFBD>{F<46>F<><46>F<><46>F<>e&F<>'F)<29><F!BFWtCF<15>EF<45>eF<65>tF<74>OuFF~zF<7A>s<EFBFBD>F<EFBFBD><11>F|<7C>Fm׭F<D7AD>ݰF<DDB0>7<EFBFBD>F+\<5C>F]$<24>FUS<55>FKt<4B>FG<>kG<0F>&G[(0Gr,nG*<2A><>GBШG&<26>G<EFBFBD>,<2C>G<EFBFBD>h<EFBFBD>G <20><>GE4<45>G<0E><>G<EFBFBD><13>Gq<47>H<><48>H
<EFBFBD>H<><48>(H&,HƸ8H׵@H/<2F>LH<4C><48>qH<71>sHG<48><47>HM<48><4D>H<EFBFBD><48><EFBFBD>H<17><>H<EFBFBD><16>HI<><49>I<><49>I{<7B>+I<10>4I<34><49>HI<48><49>MI<06>cI<63><49>jI
b<EFBFBD>I?މI<DE89>/<2F>I]ٛISV<53>IJ=<3D>I:<3A><>I<EFBFBD><49><EFBFBD>I<EFBFBD>><3E>I<EFBFBD>Y<EFBFBD>I<EFBFBD><49><EFBFBD>I~<7E>Is<0C>IB<49><42>I<EFBFBD>D<EFBFBD>I<EFBFBD>
<0A>I<EFBFBD><49><EFBFBD>I<11>J7J<><4A>(J<><4A>=J<><4A>PJ<4A>QJ_aJ<61><4A>aJ-<2D>dJcjJ<6A>qJL<>J<EFBFBD>ތJ<DE8C><4A><EFBFBD>Jl<4A><6C>J<EFBFBD><4A><EFBFBD>J<EFBFBD>[<5B>J<EFBFBD>W<EFBFBD>JO&<26>J<EFBFBD><15>Jj+<2B>J"<22>K++K<><4B>>K<><4B>NK/kiK<69><4B>uK<75><00>K<EFBFBD><4B><EFBFBD>K<EFBFBD>[<5B>K<EFBFBD>#<23>K2<4B><32>K<EFBFBD>	
L<EFBFBD>>L<><4C> L~<7E>'L<>e,L<>
<L	<09>>LP<4C>^LтcL%<25>jL<6A>pL:{L<><12>L%ˊL\<5C>L<EFBFBD><4C><EFBFBD>LYݥL1<1B>LX<>Lm<06>Lڔ<4C>LV<4C><56>L<EFBFBD><4C><EFBFBD>L<EFBFBD><4C><EFBFBD>L<EFBFBD>H<EFBFBD>L<EFBFBD>gM&<26>EM<1D>GMMLMN<4D>LM<4C><4D>NMdX\M)=~Mt<4D><74>M<12><>MK<4D><4B>MW<4D><57>M<EFBFBD><4D><EFBFBD>M<EFBFBD><4D><EFBFBD>M<EFBFBD><4D><EFBFBD>M<1A><>Mb<4D><62>Mc<4D><63>M<EFBFBD>h<EFBFBD>M<EFBFBD><4D><EFBFBD>M<EFBFBD>GNa<4E>N{xN<>t"N>;NM<4E>HN$`Ng}mNnN<6E><16>N[ǈN<C788>ݣNl<4E><6C>Nǅ<4E>N<EFBFBD><4E><EFBFBD>N1f<31>N<EFBFBD><4E><EFBFBD>N<EFBFBD><00>NO<18>'O5Ov<4F>\OF(oO<6F><4F>rO<72><4F>rOfČO<1A>OC<>OK;<3B>O<EFBFBD><4F><EFBFBD>O<EFBFBD><4F><EFBFBD>O]<10>O<EFBFBD>9<EFBFBD>O<12>O<EFBFBD><4F><EFBFBD>O<EFBFBD><4F><EFBFBD>OKP<0E>Pl<50>P<><50>$P<><50>HP<48><50>HP<48><50>HP8"IP<49><50>MP<10>NP<14>SP<53>\P<><50>gPI<50>pPf<50>pP<70><50>sP,<2C>uP<75>3<EFBFBD>P<EFBFBD><50><EFBFBD>P<EFBFBD>ڇP<DA87>M<EFBFBD>P><3E><>P<EFBFBD><0B>PJ<50><4A>P<EFBFBD><0F>P"<18>Poi<6F>P<18><>P<EFBFBD>:<3A>Po<50><6F>Pz|<7C>P<EFBFBD>Q,N Q[o Q<><51>$Q<><51>)Q<>$,Qz<51>FQ<46><51>TQ<54>fUQ{<7B>sQAwQʺ<51>Q<EFBFBD>p<EFBFBD>Q<EFBFBD><51><EFBFBD>Q<EFBFBD><<3C>Q<EFBFBD><51><EFBFBD>Q='<27>Q0<51><30>Qo<51><6F>Q3<>Q<EFBFBD>^<5E>Q`<60><>Q<EFBFBD><51><EFBFBD>Q<EFBFBD>S<EFBFBD>Q<EFBFBD><1A>Q+<2B>R<><52>R<><52>R<><52>Rd4#R`<60>)Rf<52>2RTR<54><TR<0E>]Rc<52>eR<65><52>tR<74>}R<><12>R<EFBFBD><12>RP<52><50>R.8<EFBFBD>R0ȹR&t<>R<EFBFBD>o<EFBFBD>R<EFBFBD>r<EFBFBD>R:2<>R<EFBFBD><52><EFBFBD>R]
Sc<53>Sz<53>SsC&S<><53>&S<><53>4S<34><53>dSpxqS:s|S]`<60>S<EFBFBD><53><EFBFBD>S<02><>SB]<5D>S٠<53>Sg<53><67>S<06><>S<EFBFBD>\T^<5E>T<> @T2kKT<4B><54>qTI0sT<73>n<EFBFBD>TE<54><45>TS<54><53>TS<54><53>T".<2E>TCw<43>T<EFBFBD>c<EFBFBD>T<EFBFBD><54><EFBFBD>T<EFBFBD><54><EFBFBD>T<EFBFBD><14>T<EFBFBD><54>U*<2A>UU<>)+U<<3C>0U<30><55>2U<32><55>>U<>?UwXFU<46>kUN<>UdN<64>U<EFBFBD>V<EFBFBD>U<EFBFBD><55><EFBFBD>U<1F><>U;<3B><>UbV<62>U<EFBFBD>ɘU<C998>'<27>U<EFBFBD>)<29>U<EFBFBD>"<22>U<EFBFBD>\<5C>U#<23><>U<EFBFBD>x<EFBFBD>U<6<>UV<>UM<1F>U(<28><>UV<0C>U<05>(V<><56>IVh[bV;<3B>kV<6B>{V[<5B><>V<EFBFBD><56><EFBFBD>V#<23>V><3E><>V<0E><>V<EFBFBD> <20>V^n<>V<0F><>V% <20>V:<3A><>Vs	<09>V<EFBFBD><56><EFBFBD>V?UW<>>
W<>?W<11>W<><57>W5<57>?W<>eCW<43>/FW<46><57>fW<66>ojWֱnW<6E>|W<10><>W<EFBFBD><00>W<EFBFBD><57><EFBFBD>W<EFBFBD><57><EFBFBD>W	
<EFBFBD>W<EFBFBD><EFBFBD><EFBFBD>W<EFBFBD>[<5B>W=<3D>Wue<75>W<EFBFBD><57><EFBFBD>W<EFBFBD><57><EFBFBD>W'<1C>W<EFBFBD><15>W<EFBFBD>$XX<>X<>-X<>g'X<>m.X<0F>.Xg[XΪuXզX<D5A6><19>X4\<5C>X<EFBFBD><<3C>X<EFBFBD><0B>X<EFBFBD><58><EFBFBD>XՒ<58>XOb<4F>X<EFBFBD><58><EFBFBD>X
Y;Y<>-Yz<59>Y]<5D>&Y<02>:Y+<2B><Y\gBY6<59>MY?cY<63>2dY@hYlOuY<75><59>xY9c<39>Y<EFBFBD><59><EFBFBD>Y<EFBFBD>όYc<59><63>Y<EFBFBD>ǬYV<>YU<59><55>Y<EFBFBD>{<7B>Y<EFBFBD><59><EFBFBD>Y<EFBFBD><59><EFBFBD>Y<EFBFBD>?<3F>Y<EFBFBD>?<3F>Y<EFBFBD>?<3F>Y<EFBFBD>+<2B>Y:<11>Yt<59><74>Y/Z`$Z~&Zߒ<5A>Z}f<>Z<EFBFBD><5A><EFBFBD>Z<<16>Z<EFBFBD>><3E>ZvX<76>Z<EFBFBD><5A><EFBFBD>Zn<5A><6E>Z<EFBFBD>f[<5B><>[<5B><>[Kn[B<>[1.+[<5B><>.[<5B>+6[)>E[FtG[><3E>L[<5B><>P[h<>S[r<>_[Kef[<5B><>p[<01><>[<5B><><EFBFBD>[}C<>[<5B>ܮ[<5B>ܮ[<5B>ܮ[3<><33>[<5B>d<EFBFBD>[%X<>[
*<2A>[9^<5E>[<5B><><EFBFBD>[3\<1A>\<5C>s\L
\<5C><>\n<>/\Vt7\<5C>C\oJ\ħ`\<5C><>q\<5C><>r\d#<23>\[0<>\RF<52>\<5C><16>\<5C>)<29>\<5C><><EFBFBD>\<5C><><EFBFBD>\<5C><1C>\;<3B>]<5D>9,]<5D>?,]<5D>{C]e"G]\R]<5D>um]<5D><><EFBFBD>]<5D>p<EFBFBD>]O<0E>]<5D>0<EFBFBD>]<5D>?<3F>]<0E><>]<01><>]<5D><><EFBFBD>]<5D>R<EFBFBD>]<5D>5^<5E>u
^Q<>^<5E>7^~9$^<5E><>F^%U^<5E>iW^<5E>vh^<5E>np^<5E><>z^u{^<5E>y<EFBFBD>^<5E>i<EFBFBD>^<5E>/<2F>^z<1B>^~a<>^k!<21>^<0B><>^<5E>F<EFBFBD>^<5E><1C>^H<><48>^<5E>l<EFBFBD>^a<>^<5E><><EFBFBD>^<5E>%<25>^<5E>_Y<5F>_gt"_ҵ,_<>^5_<0E>E_<45><5F>K_M<5F>]_<1A>__<5F>4h_ݾq_<71>ȇ_Xs<58>_ӣ_>$<24>_<EFBFBD>+<2B>_<EFBFBD><5F><EFBFBD>_<EFBFBD><5F><EFBFBD>_
;<3B>_*i<>_<EFBFBD><10>_<EFBFBD><11>_<08><>_Y`<60><>`<60><>[`r<>i`<60><>p`e<>r`<60>\<5C>`w˳`<60>T<EFBFBD>`<13><>`<07><>`Ί<>`<60><><EFBFBD>`<60><><EFBFBD>`<60><><EFBFBD>`-4<>`<60><><EFBFBD>`<60>T<EFBFBD>`'x<>`<60><>
a<>Ea<>?;a=k[a<><61>da<64><61>iaBma<13>pa<1D>a<EFBFBD>_<EFBFBD>a?<3F>a<EFBFBD>x<EFBFBD>a<EFBFBD><61><EFBFBD>aњ<61>a4<17>a:<3A><>a<EFBFBD><61><EFBFBD>a<EFBFBD><61><EFBFBD>a80<38>a5<61><35>as<61><73>a<EFBFBD>M<EFBFBD>a<EFBFBD>7<EFBFBD>a<EFBFBD>7<EFBFBD>a<EFBFBD>7<EFBFBD>a<EFBFBD>7<EFBFBD>a<EFBFBD>7<EFBFBD>a<EFBFBD>7<EFBFBD>a<EFBFBD>Sb<><62>b<><62>b~6b~<7E>Eb7<62>xb<78><62>|b<><62><EFBFBD>b <20>b<EFBFBD><13>b<EFBFBD><62><EFBFBD>b<0E><>b<EFBFBD><62><EFBFBD>b<EFBFBD><62>c<><63>'c<>[.c<><63>5c<06>Ac<41><63>Kc<4B>XNcn~ec<vc<76><63><EFBFBD>c堺ce<63><65>c<EFBFBD><14>cO%<25>c@R<>cK<63><4B>c <1C>c'<27><>cGd<><64>!d<>'d<12>Ad<41>dJd<4A>Vd[<5B>cd<63><64>td<74>6<EFBFBD>dV}<7D>d<EFBFBD><04>d<EFBFBD>1<EFBFBD>dY<64><59>d<EFBFBD>Źdc}<7D>d<EFBFBD><64><EFBFBD>dAoeJ<65>e-<2D>e24eg<65>?e<17>AeؐGecZJeNeOUe<55><65><EFBFBD>e6,<2C>e<EFBFBD>R<EFBFBD>e?t<>ePټe<D9BC><02>e<EFBFBD><65><EFBFBD>e1Y<31>e<EFBFBD><65><EFBFBD>e8<65><38>e#<23>e<EFBFBD><65><EFBFBD>e<EFBFBD>qf<>f<> &fx(,f/4fe<66>5f<10>=f<>{@f<19>ffF<66>ofD<>f<EFBFBD>1<EFBFBD>fvk<76>f<EFBFBD>K<EFBFBD>fJ<66><4A>f&Y<>f}/g`@gZ<g;<3B>&g<0E>Gg<67>Pg<50><02>g<13><>g<EFBFBD>-<2D>gGY<47>g<EFBFBD><67><EFBFBD>g<EFBFBD><EFBFBD>gC<67><43>g<EFBFBD>4h$h<><68>&h*h<>r/h<05>MhtPh|<7C>^h<>ch<03>gh<67>Hqh<71>W|h<>0<EFBFBD>h
<EFBFBD><EFBFBD>h<19>h!<21><>h<EFBFBD><12>h<EFBFBD><68><EFBFBD>h
I<>hS<1F>hǈ<68>h<EFBFBD>6<EFBFBD>h4<>h;`#i*iRt=i<>QEi<45><69>Ui<1E>ti<74>bxi<78><69>|i<>i<7F><14>i<EFBFBD><69><EFBFBD>iI<69><49>i<EFBFBD><69><EFBFBD>i<EFBFBD>(<28>ic<69><63>iԦ<69>i3<69><33>i<04>j<>/j<08>jh`(jl<6A>1j<31>a:j<>|@j<>cFj%KLj<4C>smj<6D><6A>mj<6D>;oj<6F>TzjI`<60>j<EFBFBD><6A><EFBFBD>j<EFBFBD><6A><EFBFBD>jv5<76>j<EFBFBD><02>j<EFBFBD>9<EFBFBD>j0	k{<7B>k<><6B>k@k<><6B>k<>H$k<><6B>;kT<6B>Rk<19>Tk<54><6B>Xk<58>N\k%<25>ck1<6B>~kK<6B><4B>k^<11>kmx<6D>kA<6B><41>k<EFBFBD>#<23>kL<6B><4C>kdq<64>k<EFBFBD><6B><EFBFBD>kDO<44>k<EFBFBD>!<21>keX<65>kV}<7D>k<EFBFBD>8<EFBFBD>k><3E><>k+<2B><>k<EFBFBD><6B><EFBFBD>k<EFBFBD><6B>lјlX<6C>l<>q6l<36><6C>7l><3E>El̷Il<49>Sl.<2E>sl<73>Lulu<6C>|l8l-ՒlT՜l"<22><>l<EFBFBD><6C><EFBFBD>l<EFBFBD><6C><EFBFBD>lyb<79>lX<08>l<10><>l<1F><>l<EFBFBD><6C><EFBFBD>l<EFBFBD>
mar
m?\mP<6D>,m<>1mW<6D>4mL9m<39><6D>Qmb<6D>Vmse|m0x<30>m<EFBFBD>T<EFBFBD>mJ2<4A>m<EFBFBD>d<EFBFBD>m<EFBFBD><6D><EFBFBD>mV<6D><56>m<EFBFBD>E<EFBFBD>m <20><>m<15><>m<EFBFBD>q<EFBFBD>mA<6D><41>m<EFBFBD><6D>nun<>no,nl<6E>'n<><6E>(n@<40>)nn?nv7En!(Gn<47><6E>MnVOn<4F>Un<55>dn<64>Ydn.<2E>zn<7A>`<60>n<EFBFBD>1<EFBFBD>n,<2C><>n^<5E><>n<EFBFBD>@<40>nm<6E><6D>no<6E>'opl/o<>h7oSBo<42><6F>_o<5F>Emo<6D>qxo;<13>o<EFBFBD>X<EFBFBD>o<EFBFBD><6F><EFBFBD>o(u<>ou<05>o<EFBFBD><6F><EFBFBD>o]<5D>oX<>oX<>o<EFBFBD><1F>o<EFBFBD><EFBFBD>o<EFBFBD>i<EFBFBD>o<EFBFBD><6F>pS<70>p'<27>p<><70>p<><70>&pE<70>(p_`,pv<70>Up<55><70>Wp*ep[0mp<6D><70>tp)Cwṕp`<18>p<EFBFBD>k<EFBFBD>p4u<34>p#<23><>pOqq4<71>qNq<><71>Cq<43>lSqQ<71>Sq<53><71>Uq<55><71>`q<>cq<63><71>lq<6C><1D>q<EFBFBD>d<EFBFBD>q7<71><37>q<1D><>q<EFBFBD><13>q<EFBFBD>s<EFBFBD>q<1A><>qs)r<>Gr<02>"r<><72>(r1<72>5r<35>6rh<72>Arz<72>Dr<44>%Qr5<72>Vragrr<72><72>tr<74>Vzrc<72>}r	<09><>r<EFBFBD>><3E>r<1B><>r <20><>r郠r<E983A0><05>rh<72><68>r<EFBFBD>S<EFBFBD>ri<72><69>r<EFBFBD>$<24>r<1A>s<>s$<24>s<>gstus<><73>5s<35><73>Ms<4D>hZs<5A>:`s<13>ds<64><73>msinsy<73>ps/bys<79>q~s۞<73>s<EFBFBD>ޓsz<>s<EFBFBD>b<EFBFBD>s<EFBFBD>֡s<18><>s#<23>s/P<>s'X<>s($<24>sl<01>sQ<51>s<EFBFBD><07>s%<25>t<>?tE
t1]t<><74>Vt<56>=|t<>Ƀt5<74><35>t<EFBFBD><74><EFBFBD>t<EFBFBD>@<40>t<EFBFBD>1<EFBFBD>t<EFBFBD>4<EFBFBD>tƮ
u5<EFBFBD>u4()uU.u)JTu<54>WuޮYu<18>_u<19>fu%xu<78><05>u^<5E>u<EFBFBD>6<EFBFBD>u<EFBFBD>~<7E>u<EFBFBD><75><EFBFBD>u<EFBFBD>4<EFBFBD>u<EFBFBD><75><EFBFBD>u<75><7F>u<EFBFBD><75><EFBFBD>u<EFBFBD><75><EFBFBD>u<EFBFBD><16>u7s<37>u<EFBFBD>3<EFBFBD>uM9<4D>u7<75><37>ul_v<>w.v<>h5vKW?vyZMv~EVv<08>\v<>\cv<16>ev<65>pv<70>wv<77><76>zv<7A><76>}vK<76><4B>v<EFBFBD><76><EFBFBD>vQv<C293><0B>v<EFBFBD>i<EFBFBD>v<EFBFBD>i<EFBFBD>v0<76><30>v"<22><>v<EFBFBD>-<2D>vLw<><77>w<><77>w\<5C>$w/Ew<45><77>Ew2fLw<4C>Zw<5A><77><EFBFBD>wy<77><79>w<EFBFBD><77><EFBFBD>wYs<59>w<EFBFBD><03>w;<3B><>w
<EFBFBD><EFBFBD>wܸxK<78>/x<>o0xj<78>6x`-=x,<2C>?x<19>JxySx}sVx<56><17>x<EFBFBD>X<EFBFBD>x$R<>x<EFBFBD><78><EFBFBD>xW<78><57>x<EFBFBD><78><EFBFBD>x<EFBFBD><78><EFBFBD>x<EFBFBD>d<EFBFBD>xϽ<78>x<EFBFBD><78><EFBFBD>xC<78><43>xͣ<78>x<06>y<><79>
y77y}<7D>EylVy<56>w_y*<2A>_ygRiy<03>iy<69><79>ky<6B>Imyoy<6F>qy<71>7uy<75><79>xy<06>zyϏy<CF8F><79><EFBFBD>y<EFBFBD><79><EFBFBD>y<EFBFBD>(<28>y.̰y<CCB0>y<EFBFBD>y<EFBFBD>8<EFBFBD>y!<21><>y*n*z<>bUzWZzAez	<09>nz<6E><7A>pzũz<7F><7A><EFBFBD>zī<7A>z۫<7A>zHȉz<C889><00>z<EFBFBD><7A><EFBFBD>zB<7A><42>z<EFBFBD><7A><EFBFBD>z<EFBFBD><7A><EFBFBD>zX<06>z<EFBFBD><7A><EFBFBD>z<EFBFBD>`<60>z]<5D><>z<EFBFBD><7A><EFBFBD>zw<7A><77>z}l<>z"<22><>z><3E><>z<EFBFBD>!{<7B><>{I<>%{3<>2{<7B><>;{<7B><>?{8<>A{J<>H{)<29>M{<7B>t{<7B><>v{%\w{<7B>x{<7B>l<EFBFBD>{<7B>4<EFBFBD>{<7B><><EFBFBD>{<7B><><EFBFBD>{3<1B>{6<><36>{<7B><><EFBFBD>{<7B><><EFBFBD>{$<24><>{<7B>%<25>{<7B><10>{<7B><><EFBFBD>{<7B><06>{|+<2B>{e<>|<7C>8|R_|<19>I|<7C>2X|w<>Y|<7C><>b|<7C><>b|<<3C>b|d|<7C>K|<7C><>|%<25>|'<27><>|<7C><19>|<0B><>|J<><4A>|t<01>|S<>|<7C><><EFBFBD>|<06><>|<7C>m<EFBFBD>|X<><58>|`N<>|8<><38>|<1C><>|<7C><0C>|cߨ|S<><53>|<7C>C<EFBFBD>|8<10>|e<><65>|<7C>V<EFBFBD>|:<3A><>|<7C>h}<7D><>}"<22>}h<>}7<>"}<7D><>&}$<24>,}<7D>v6}<7D>vA}<7D><>F}<7D>M}<7D>R}@<40>W}"l]}#<23>f}(<28>f}<u}<7D>Gw}<08><>}<7D><><EFBFBD>}<7D><><EFBFBD>}<15><>}S<><53>}<7D>t<EFBFBD>}*<2A>}T3<54>}G<><47>}	~<7E>$~n<>!~<00>=~<17>G~<7E>Y~<7E>b_~<7E><>a~<7E>\p~<7E>Ks~R<>~<7E><><EFBFBD>~<7E><><EFBFBD>~{<7B><>~<7E><07>~<7E><><EFBFBD>~<16><><7F>/<>E<45><7F>E<45>GF)<29>M<4D><7F>N*/OM^Y<59>+Z<5A><7F>[W_e<65><7F>ux<7F>u?<3F>x2<7F>{<><7F>|<>)Ҁ(<28><><EFBFBD>c<EFBFBD><EFBFBD><7F><EFBFBD><EFBFBD><<3C><EFBFBD>,<2C><EFBFBD>X<EFBFBD><EFBFBD>k<00>v<00>t<18><00>o<00><>o<><00><>N<><00><00>%<00>n<00><>/<2F>4<>D<>ִ<00><><00><><00><><00><>wM<00>'
'}z<00>
<00><00>emXZX/.<2E><00>L/#+t<00><><00>N<00><><00>P$R<01>j<00>pw<><00><>gK<00><>'<27><00><>;<00><00>],8,i<00>,<00><><00>A<00><><00>HӀT<><00><><00><>8<><00>7<00>r<15><00><>ϗ<00><>@w"<00>
<0A><00><><00><><00><00>H<00><><00><>4<><00>_<00>]<00>S<00><><00>8<00>(<00>M<00>A<00>k"`G<><00><00>x<00><><00><>v<><00>qB<00>=<00>c=R<><00><><00><><00>ú<00>v|<00><><00>tȈ,,<00><>\<5C><12><00>h/<2F><><<3C><00><><00><>=<3D>	l<><00>}ߘ<00>bȓ?<3F>x<><00><00><>q<><00>kl<>_<>XK<00>
zIK#<23>R<><00><><00><>Ŏ<00><><18>-r)P<00><00><00><>0<00><><00><>Z<>Ʈ<00><><00>4<00><><00><><00>.<00>B)<00><><00><><00>i<00><><00>Z<>f<00><>x<00><00><>_<0C><00><00>:a?,<00>}J?<00><>M<>
<00><>8R7<>-v<00><00>?<00><00>|<00>"n<>NNmV<00><>R<>g<>4.<00>sg<>s`tMr<00>j<00><p<>	q<00>
<00>
<00>o<00><><00><><00>F%Ф<00>g<00>f<00>l<D<00>e$<00>Sb<><00><>8M><3E><01><00>aa<>S<><05>	<09>n<>ɹ<00><><11>6<>`j]FU4<00>T<><00><00><>#<23>Z1<>yU<00>#X<><00><>R\U<><00><><00>4=<3D>tJdycT<13><00>4<00>
mJ?h<00>&<00><>/O<00><><00><>}`><3E>I5<00>9<>m<>n<><00>,5<00>g<00><00><>`o<08><00>?<00>hk=.<2E>b<><00><>s<>YGy<><00><>g<00><><00><>|&<26>>~5<>V<>p<>ڏ(<28><0F>J<><00>>(<00><><00>r<00>@19p<00>+q<><03><00>(P<><00>0t<><00>y<0B>E<><07><00><><00><>xF<00><><00>
<00><><00>^<00><><00>Hv<<00>ןr<><00>͆qsD<>#W8 <00><>4<>q<><00>"%<25><19>l<>G<00><>x¨<00><><00><>k<><00><00><><00>f<00>j<00><00><><00><>Q<>bd<00><><00><><00>y<>e<>- <20>p<00>.<00>If<>P<00>(<00>Q<00>k7<><00>A<00><>(<00>w3<><00>A<1D><00>3!<21><00>^<00><>b<>'SZS<00>e<00>J<00><>8<>[|<00>E#<23><00>h<00><><0B><>#	Eyk
<00>0<><00><11><00><۠S,<00> OI<00><>Œ/0<00><><00>N<00><><00><>h}<00>K<00><><00><>
Q<>:F<00>
U¤<00><>Gfm<00><><00>Z,<2C>-<2D><00><>Q<>e@<0B><00>u?{<00><>1p8<>Tg<><00><><00>(<00>$<00>$<00> <00><>O<>[<5B>;xG+<2B><00>P<00>-7<><00>}<00><00><>];<10><00><>h+55w<>9<>l<><00><>ɓc<>j<>ċpyr<><00><00>zlj<00>(<00>'}&<00>-<00>6<00>IՉ<00><>]j<00><>w<00>Q<0E>e(<28><00><><00><><00><><00><>wK<03><00><>z/<2F>u5X><3E><00><><00>J<00>X*exw^X7pYn-b<>h5e<04><00><13><00><>
<EFBFBD><00><><10><00><><1B><00><><00><>	_<1C><00>y<>Ѫ<00>/,;<00>z%<25>SY<00><00>
<00>K@<40>Q<>/_0<00>1<00><><00><>g
<00>^.<2E><00><><00><><00><>$NM<00><>!<21>a<00>z<00>d8{<00>y<00><><1C><00><00><><00><><00>(J4<><00><>//^d<>x<>K<><00>H	<09><00><><10>KY<00>3d<00><>X-ez<00><><><00><><00>W<00>v]<5D><00>-\<5C><00>i?}T|<00>]<00>M<00>!<05>eȺ`PI<00><><00>_<00><00><><00>5<00>G[<5B><00>w<00>x<00><00><00><0E>@<00>y<00>	_/<00>V<12><00><><00><><00><>V<><00><>:u7<>Б&<26><00>-<00>/<00>/<0F><00>|/r<00><>T<><00><00>w<00><>p<>
<0A><00><>G<><00><><00><><1E><00><>,q:y5<00>4(<28>KB<00>Dn<><00><><00><>9<00><>L<00><>j\<00>_<0B>0L<00><>T<><00>?ˀ<00><><00>d<00>d/<00><><00>1<00>?,<2C>ΰ<18><00><><00>B-i<00>-b<>t<>_3<00>/sz<00>9(<00><><00><><00>g4=/<00>jU<><00><><00>oN<><00><><00>*C<00>`<60><00><><00>'<00>!#?<00>V<00>T\<00><><00>ezXN<00><>B<>i6R<><00><>y<00>9<00><>	\~<7E>,o(<28>v<><00><>S<><00><><00><00><><00><00>R<00><>e<>9Ne<00><>p(<00><00><13><00>G<11><05>h<>L<00>rB<>u0<><00><>~z<00><>`)<00>D<00><00><><00>_<00>Rɲ/4<00><><00>c7<><00>H
<EFBFBD>;<3B>H<>SP0}0>&j<>X<>߯uۃ<10><00>z<00><><00><00>L<00><><><00><><00><>]<5D><00><><00><>Q(;<00>+<00>;<00><><00>Cg(;><00>(<00>:9<0B>*n=ҕ<05>H<>l<00><>11"t~<00>K]0[<00>sq<>gC<00><><00>:<00>H
4<00><00><>cHb!<00><><12>*<2A><00>c<00>|<00><00>PFzpp/<2F><00><00><><00><><00><><00><>(<28><00>]<06><00>3<00><> 8<00><00><00>C<00>zкx<><00>a<00><><00>4<00><><00>u<00><00><>:<3A><00>4<00>#K<>9<><16><00><00><>(<28><00><>j4<00><>J<><0B><00>	<00>{&+~\<00><>\<5C><00><>!<21><00><00>!<14>i[<00><><00><><04><00>E<00>Ab<00>|n<><00><>Oh<00>I<00>
<00>9X)<00>SI<00>Ub=0
<00>6m R,\<00>%G#>ߞ];kD<00><><00>n"<22>::<00>)դN
<00>'N<><00><><00><><00>1<04>>	<09><00><><00>N<00><><00>:<00>P<00>GR-<00>`Q<><00>DQ<>
]<00><><00><><10>B<>t<><00><>E<><00>CD<>6e<>h;:9kG<00>O<00>NӲHgy <00><><00><00><><00><>0<>'<27><00><><00>d<00>QN<>Ndd<00><><00>cɹ	@<00><>aT^<00>4ƒ0<00>M#<23>͑i<><00><><00>IC<>hTfب)<29><00><><00><><00><><00><><00>w<00>tR+)\N3<>H<><00><><00><><00><>7H<00>|<7C><00><00>G\<5C><00><>6<>9	_<00>n<00><><00><05><00>z<00><><00>,Le<>}<<00>]n<><00><><00>3ݯ<00>~<00>VIX<00>XR%D<><00>Zs9<00>CU
<00><00><>1(r,s<!|<00>|<00>HoJ<00><>&Kr<00>K/B
<0A><00><><00>:<00><><00><>͛F<>"^8r<>%<00>q<07><1E>5<><00><00>S<00><00><00><><00>}h}<00>|,}'8<19>e<><00><><00><><00><><00><>x<>p<>7v<00><><00><><00>#<00><0F><00><00>)8<>y<><00><00>m<1D><00>p<10>D.<00>Egq<00>W	S<00><><00>S]<5D><00>.\.-<00>*<00>*<00> <1B>0<>H<><00>C<04>k<>%<25><00><><00><><1E><00><><00><><00><>@<00><><00><>6<><00>&@Q"TV5<00><>.nD><00><>8%<00>%<00><><00>/VzI<>f<>#<23><00><><00><1F>ye<00><><00><00><><00><>u'wE0<>*<2A>3<>@@@<40><15><00><><00><>c<>(<28><00><><00><00><><00><><00><>#<23>V<00> <00>`@sjECTJW<00><00>X<00><>-<00><04><00>\<00>w3w<00><><00>1;&<00><><00>!"<22>t[<00>
<00><><00>lUI<00><><00><><00><00><><00><><00>T<00><><00>R<00>`<0F><00><>MO<00><><00><>S<><00>&%<25>	{3<><00>J<12><00>GGj<00>]<16><00>o<00><00><>yS<00><00>A<00>i<00><><00><>A[bO.<2E><00>2<00>^<00><>w<><00>'<00>a<10><00>a)/<00>~<00>X:_<><00><>Mz\<00>""l]:I`wQ<00><><00><>k<><00><>@<'<27>`u<00><><00><><13><00>;K<<00><><00><><00>ҜV<00><><00><>QRǊ<00><><00>><3E><00><00><> <20><00>?<07>y^<00><><00><>O.<2E>&<26>L<><00>7<00>w<>&<26><00>L<>#<00><<00><><00>SP<00>Q<00><><14>cVъ<00><>Ţ<00>.y.
<0A><00><><00>}<00>J:]<00><>SZ{<7B><14>:]&<00>f<00><><00><><00>R%G<><00><>ʓ<00><><03><00><>^<5E><00><><00><00>M|<7C>W<>J<00>Fq<><00><>S<>ړ<00><><04>f<00>I<II<1A>	?<00>5{
<00><><00><><00><><00>Z'_%$G7<00><>FG^<5E><<3C><00><><00><>b<><00>+ &<00>8N<><00><><00>b<00>$my%<25><00>)Z@<1E>y<00><>Y<>+<00>f<00>5t7f<00><><00><>v<><00><><00><>?v<00>;<00>
)<00><><00>@U<>gu<00>
<0E>4Hɿ<00><><00><><00>y<00>	<00><00>#'!<00>V:V<00>t7<><00>]<5D>]2B{Us:to^̙<00><>-<2D><00>D<00><>sl[u<>d+<00>$O<><00>i
~<00><><00><00>S]C<00>]<5D>\<5C><00><><00>s,<2C>l<00><>\<5C>G<><00>d8=<00><><00><00>6<><00>+<00><>OCݫۧNg<18>_h<00><><13>i<>y<>uj<00>2<00><>'<27><12>|bQ<00>1/<00><>;<3B>/<00>><00><00><><00>~<00><><00><>c<>b<> <20>0<>Ӑ
3D<><00><>
PM<00>[<00><>T
<00><>w<>O<>Q<><00>	X<><00>;/)yT<><00>:v<><00><>9<><00>Q<00><>Yc<00><>6*<00>
<00>)<00><><00><>:^j_)<29>]<5D><00>[4<>f]<00>^<00><>X<00><>c<><00>>pE<00>FU<00><><00><><00><00><><00>?<00>D<00>;<00><><00>L<00><><03>7<00>LEP<00><><10><00><><00>p<00><><00><><00><00>D4<>6<><00>H<00><11><00><><00><><00>cѥ<00>2n<><00>~<00>7<00>B<00>v}<7D><00>++vD<><00>'<00><>W4C<00>X<00><>kK<00>*<00>#<23><00><><00><><00>B3<>r~<00>SiN<><00><><17>*<2A><00><><00><><00>/0<00><>&ׂ<04>N<>n<><00><>_<><00><><00>W<00>|q<00><>:<00><>b<>M5<00><>K
<EFBFBD>C<>Ô|<<3C><00><><00>D$<00>!<00>+q<00>|^#6<>-a%<25>PA<00><><00><><00>L+oϽ<00>@<00><00>?<00><00>%<25><00>\)<00><><00><>q<><00>FK<05><00>=<00><>PN<00><>[ <00><>;R<><00><>ʪ<00><>%A<03><00>ER<>,&SC<00>z9HB<><00><>|<7C><00><>ұ<00><><00><>Q<>&<26><00><><00><><"л5<>m=<00>5(<00><>7<><00>tM<10>]<5D><00><><00>+o<>iA<00><00><>_<><00>ԖӪģb<>s<><00>.Q
U<><00><><00>%<00>/<00><00><><00>Nq<00>kTT<><00>~0p<>5m<00><><00><00><><00>>8Nu<00><><00>=4T<D)<29><00><>h<>	<09><00><>i<>
<00>,<00>L<00>I
<0A><00>q<00><>;k~<00><0F>	<09><00><><00><z<><00>{<00>6
J<00><><00><>~I<00><>v<><00><><00><>9+<00><>$<1F><00><00><><00><>s:<00>v<>jqp<00>q%*e<><00><><00>{<00><><00>e,@<40><00>-z<>=<00>2<00><00><00>%<00>KZ7Q ަ<00><>R<><00>J<00>@<40>W<><00><00><00><00><b>"[<5B><00>=I<00>!K<00><><00><><00><><00>%<00>S<04><00><><00><>2<><00><><00><><00><><00><>c[_<><00>k<0E>/<2F>|<h<><00>$<00>Z@<40>U<>&<26>9^<5E><00>O<00>OZOh<>i<>b<>,2b<><00><><00><>o<00><>l{<00>{<00>{<00>{<00>{<00><><1E>qJ|o[<5B>{<7B><00><><00>vZ<00><>-=<00><00><><00>:<00>M<00><><00>a<00><><00>)<00>f<00><>C[*<2A><00>
3<>)<29>,<2C>
<0A>v<><0 <20><00><><00>(<00><>*guf<00>}<7D><00>+<00>@qV<><00><>q<><0B><00>N6@$T.<><00><><00><>؜Ogh6<00>W<1A>	W<00><00>0<><00><><00>5 <20>w<><00>J`<60>e$<00>V<00>8<00>2<00><><00><><00><><00><><A<0F>xD<00><>`<60><00>B<><00><><00><><00>HB6-<00>Frs<><00>-o<><00>UsV54<><00><><00>cQ<>
>E<00>@<00>mU<><00><><00>.<00>P<00><>'3f<><00><>k0<>D<00><><00><00>P <1E><1B><00><>n	<00>.h<00>[<00><>P<><00>b	\z<<00>Z<00><><00><><00><><00>e<00>]<08>/<00><>+<2B><10><00><><00>hW<>g<><00>q<00><><00><><00><>fPP%<00>n<00><>۱%<00><><00><00><><00><><00><>]\<00>
^e<00><>z<>Ԟw	"<22><00>"<00>
<00><><12><00>L<00>=<00>*<2A>	<00><00>H<><00>~c<>N<00><>g:<00><><00><><00><>4<><00>:<00>v!-|<00>
<00><<00>o<00><>16c<>J<>
[<00><00><00>I<00>=4<00>@<00>Wٞ<1A><00>Y<00><><00>}[<5B><00><>hV<00><><00>.<2E><0C>M<>"<22>43m1Z_<00><>W<00>B'c6<00><><00>!Y<><00>{A'8}~<00>P<11>Lt<><00><>1i5(V
<00><>+#<00>Q3j<>J<><05>$<24>4<>L<><1D><00><>ו<>t<00>bw<1D><00><><00><><00><>)$}!(<28>&[(<00><>y@<1D>Y<><00><>l<>pLy<00><11>ޢ<00>@<00><>	R<00><><00>6^bo<><1C>?<3F>O<><00>i<1E>g<>U<><00><>
<EFBFBD>2n6<00><><00><00>y<00>[q-+W]2>n<00>)<00><>+e<00><>|<7C><00>=<00><><00>=<00><>MD<00><>A<><00>K<00>lw^)^<5E><00>MÈ<00><00>4<00>(<00>"Lx><00>u<00><>v<>4<00><><00><>gT<00>F7<00>6<00>x><3E>X<><00><00>j<0C><00>R'C~<7E><00>`<00><>8<>*<2A><00><><00><>n<>3^<00><>E&<00>L<00>;<1D>UZ]<5D>R<>k<><00>
^tC<00><00><>;<3B>oQ{Z	<09><00><>v<><00>9m+<00><>&<26>
fG%1<><00>F<05>@SR<00>@E7,<2C>Gc?drx<)Suns<00>7<00><><00><>5}DJk<>ۂ:<00>An{'<27><00>bB<>X<00>0؟<00>6Q"<06><00>C<00>+F<><00>'XW<00><>ʮ#<00>YA9<00>[<03>KL<><00><><15><00><><00>&<00>9<00>y<00><><00><><00>q<00>m"`<0E><00>_<00>y<08><00>D<0F>O<><00>D	<09><00>
-w<>2<00>r<00>HwH֢x<>l<>
6[<04><04><00><><00>^<00><>Θ<12>?U<00><>k<>d<><1C><00><><00>T<00><><00>F?7<>'<27>n<><00><><00><><00><><08><00>|<02>jmm@<40>#J<00><><00>L<13>*aFF'Ms3<1A>OW^%4*bDh<>-=ߚg<>N=PfGe<>9fv8jN<><00><><00><><00>a<00>adaG<><1E><00><>7Q<00>Ty<><00><02><00><00><>+p<00>m<05><00><><00><00>k<0E>(<00>$<00>0<00><><00>W<00>><00><><00><><00><>"<22><00><18>+<2B>4<><00>9<00>Cn!i<00>%Q<><00>[<00><>^N<00><00>[<00><><00>{<00><>g<>+<2B><00><><00>&2<00><>ל<0E>4\#s<1F>՛<00><00>c<00>Pk<>g<00>X.Q/<00><>I<00>)<00>Q<00>m<00><><00>FQ<00>7<00>#<00>)u*<12>]<5D>C.<00>n<00><00>(<28>]KF_<00>ONv<00><>C<><00>"<00>n5<><00>%<00>:Coa<>װ)y||߼<00><>P7<00>f8`<00>J&<26><00><00>_F̱WH{]<00>A<00><><00>!FF<00>E
<EFBFBD>i1<><00>;<00><>@]<1B>Ue
<0A><00><>54<00><><00><><00><>.<2E><00><><00><><0E><00>C[l<01><00><00>8C<><00><><00><>6:m>I<13><00>&=/<00>Z<00>n<00>R<1E>']<00><>-<2D><00><>~#IFZ<>m<>|.C<><00>pw_<00><><00>D9/5<00><><00><>gJ"<22><00>)<00>a<00><>	B]=|<00><><00><00>C<00>)<00><>}>A<00>F<00><>M<><00>_u<>T<><00><>x<><00><><00>x<00>x<00>K<00><00><>q<><00>,N<00><><00>x<00><>Wwֶ<00><><00><>)y<00>Gto<00><>"<00><><00>-Y<><00><>H<00>or<><00><00><><00><>9<><1D>ɩ<00><><00>s@<40><08>J<>hL<00>b<00>3<00>j<00><>,<2C><00>#-<2D><00><>?-{;<00>5,<00><00>1<00><19><00>'<00><>t;\<00><i<>@<40><00><>"<00>Q<00>r<><00>)r<>^*	U<00><>L<><00>P<00>p<00>p<00>1<00><>
<EFBFBD>6<><00>`N<>א<00><>^4`<00>\B<00>H,<2C>zx"<22>@<40><00>3<00>Hct<00>-<00><00><><00>q<00><>rp'IE<00>1	<09>1;<00>f<00><00>KMK<><1C><00><>)<29>	<09>#<23><00><><00><>(<28>T<><00>J<+<00>:<00><><00>$>,<00>%<25>C<00><><00>=<0C><00>w<00><>.K<00><><00><><00>A<00>8j<><00>J^<5E>q<><00>{q~Mo<>S<>ݍ<00><>B<00><><00><>o<00><>̷.<00><><00><><00><><00><>&H^<5E><00><><00>"<00><>8ee<><00>zf`I<><00><>5WW[l<00>{<00><><00><>FM<00><><00><00>X]<5D>t<><1F>*-?1PK<00>`<19>q<><08><00><><00><><00>8<00><><00>*<00>BV	<00>l-<00><00><>D<><00><>I<><00><><00><><00><><00><><00><>rj<00><><00>x<00>xN|q|f|8|C|<00>x<00>x<00>69<>t<>n<00>Yc<>GAQ<00><><00>@Y$<00><>:<3A><00><>w<>"<00><>[`<00><00>	<00><><00>U@<40><00>#;<3B>gk<00>e/<<17><00><>Lxq~<00><>
G<1E><05><00>2<00>M<00>Q<0B>E<>(<28>b<>> `><00><00>><00>
<00><>:M<00><>o]n<00>$:
.'w<>8<>O9@9<00>x<00>xw*ʊG<><00>  <20>N<><00>|8<>><3E><1F>R<>c^R
ԆuF<>O<>}<7D>r-U!<00>7[<5B>z<>;<3B><00><><00><><00><>SC<00>u<00>Uu<00><00>M<00><>`<60>	j<00>m<00>B<00>kP$,<2C><00>T<00>0<00>s<00><00><><00><><00><00><><00><00>m<00><><00><>D<><00><>"<00>\-8<00><><00><><00><><00><><00>.<00><00><>Ҙ<00><>><11><00><><0F>E<><00>1&>;1	<09><00>i<00>^<00>9BaL<00>Pa<><13><00>K<00><><00><>ʇ<00>}<00>m<00>!Q<S<00><><00><>=a3<>[Pγ<00>3<00>v<00>E<00>	<00>	E
 I<00>D<00>x
S<00>;<00><>/<2F>Cl<00>2<00><>YA<0C><00>g<00><><00><00><>9YBS<00>5<00><00><00>|<00><>b;<3B>#<23>yI<00>f?,j
<EFBFBD>O<00>P<13><00><><00><><10>ݿ 2<00><00><>Dh<1B><00>;<00><><00>t<00><><0C>g<><00> <00><>Tbx<>B'0#<00>,c3<00>`<00>G<<3C>
q<>O<>V<00>U<00>8;<3B><00>D~<00><><00>B<><00>(<00>(()icc$<24><00>V<00><><00><><00><><00><><00><><00><>l<><00>e<><00><><00>a<00><00><>*=Z8<00><>aM!b7<00>t<00><00><><00>.<00><>-<2D><00><>y<00>Obo<00><><00><>
&D"_rd<>M<>d<00>s<00>bU<00><><00>o<00>7j7<00>7(2<00>5<00>,<00><><00>G<00><>|<7C><00>n<00><>__<00>"|c<00><00>d<00>44<>%<25><00><><00>%	M|<00><>ZD<><10><00>*ܖP<>38<><12>90<00>ʘ<05><00>j<00>R<03><00>Z
<EFBFBD><00>W[B<00>`<00><><18>S<00><>~*xp<00><><00>F"!yD?"<00><>a<><00>y<00>h<00><>d&@<00>w<00><>dY<00>%N<><00>wX<>*<00>W<00>'<00>6Aag<0B><00><00><>W@<1B>n4d<00>9<00><><19>rU<00><>~!4<14><00><><00><><00><><00><>&<08>u}<00><>\<5C>AO<00>G~<00>,@=*S<>|<7C><00><><00>.<00><><00><>/<2F>u<00>O<b<00>7<17><00>n<00><00><><00><00><><06>F
<00><><00>wy]<5D><00><><00><><00>+<00>r<>,OW<>Z<00>~<00><><00><>Yg(<28><00><00><>owK<00>S<00>4<00>f<00><><00>K<00>&<00>9<0C><00>"<00>B<00>\<5C>-<2D><00><><00><>'%<00><>^~<00>P<18>dtpe<>/<2F><07><00><><00><>e<><00>yT<><00>	<00><>l<> <20><00>:1c<00>*<00><><00><>c<00><>S<>:#<00><>c<>+<00><> <20><00><>Oq<00>,ȶP<>5,! <00>z<>O<>"<00><00>J<01><1B><00><>P<>R<>x<><18>B\Wn[G<><00>tmt<00>uRC2)uiZ!OM'<00><><00>B<00>4fҞ<00>F<00><><00>}<00>]<1E><00>*`<00><>G{?Vw<00>Q<00><><00>'<27>;x<00>Bǚ_&<<3C><00>s<00><>X<00><><00><><00><>wX<><00>b	Y<00><>c[<5B>,GG
M<00>}<00><00><00><>*iV<00>N]@<15>h<>44`<60>qv<00>8<><00><00>{<18>|<7C>ZF<00><1F><00>Xgr<00><>E<>1<><00>[<00><><00>*<00><>cdQ<><00>0
<EFBFBD>D<><00><00>'no)<00><>i<><00><><00><00><><00>5{[<5B><00><00><><00><>k<00><><00><><00><><00>x#<00><><00><>5~<00> 
<0A><00><>hb{V<>D9<00>o<><00><00>FS<>)E<><00> <03>~jcС<00>~x<00>rˎn*@.Vv[<5B><00>1<19><00>j-<2D>u)m<><00>]"<00>+<00>y<00>(<00><><00><>W<>80<00><><00><>۰<1E>~<7E><00>><00><00>k1i<><1C><00>;<00><|<7C>ȩ<00>v<00><00>xёk <00><>kQ<00>9q9(:<00><><00>k4<><00>6)fB<00><><00><>,<2C><00>'<00><><00><>yzhQ<00>c׾G<><1C>eI<00><><00><><00>Jn<><00>"<00>0|<7C>N<00><><00>hǙ1<><00><>!D!<00><><00><>B8<00><><00><>&<26>i<><00><> <20><00>0<00>0@~0?0y<>lW½<00>H<00>h<><00>@<00>}.9<00><><00><><00><>8<>kR_ڙ<00><>O=<1E><00>rc<>u<00> C-<2D><00><><00>(<28>Iw<00>yЕ<00>9z<>{<7B>'bGf<00><00>2<00><><00><><00><><00><00><>k2<00><>Q-`<60>QXo<><1F><00><><00>M<00>Vn<>F<><00>e<00>(o<00><>;<3B>)<29>%{<00><>JkΔl<><00><>d<>ĥ<00><>ڍ<00><>)<29><00><>P<00>[x(<28><00>,<00>n'<00>Zbm:<00><>2<>"|'<00><><00>z<10><00><>5<>=<3D>-<2D><00><>u<>D<><00><>*YW<>F,<00>m<00>J<00><><00>q<><00><><<3C><00>>]<5D>kIk>khS_S
<0A><00><><00><>a<><12><00><>,'<27>6<><00>*<00><>8<><00>^<00>:p<>ˬ$<24>,<2C><00><>~<7E>BW<><00>9[<5B><00><><00><><00><00>]Y<>kK<00>@<00><>A<00><>+<00><>w<>z<><00>l<00>jc<><00>s<05><00><>`<60>1z<1F><00><>`<60><00><>&<26>[<5B><00><>$<24><00><00>j<sZ+<0B><00>$J<><00> <00><><00>u
<EFBFBD><00><>?Gq<><00><><00><>A>H<>Y<><00>W<00><><00><>}<7D>7E0A{<63F<<1E>`<60><00>FC<00>H<00>H<00>GH<00>H6<1E>R><00>U<00><>gg:<3A><00>2<00><><00>]<00>#<00><><00><>Z[<00>M<><00><><00><00><><00>><3E>k<>8H<>W<>rBB <00>N<00>s<00><00><>i$Q<><00><><00><>Z<><00>q<00>L<00>'/<2F><00><00>
$<00><><00>ڋ<1A><00><>[<00><><00><00>8-<00>d<00>$<24>6l
,xl<><00>x<00>Ob1L9'	><3E>̇<00>R<00>
z<00><>Z<00>Y<00>YW<>,(T˸(s<>a<><00><>e<><00><><00>C@<00>5<00><><00>7<00><>#<23>	<09>;4
<0A>%<25>p<><00><>;<3B>"<00><00>/\i<00>;9a<00><><00><00><>H5<00>e<00>GVH<00><00>N<><00>cM*<2A><00><00><00>Q<><00><><00><00>T<0E><00><><00>E<00><><00><>m<>CZЈ<00><>_o<00><00><><00>]G;V<00>G<00>K<00><><0C>,<2C><00>*,J<00>><00><><0F>bA<00>8<00><><00><>#A<><04><00><>9<>*<2A>L<00>!<00>!S##6#<00><00>@<00>|<00>2@%<1A>Z<><00>"g<><02>)5<00>6x<><00>T%f5<><00>hg<00><>
S]<5D>X-_<00>VSk<>\<5C>i<><00><>I<><00><><00>\<00><><15>U<00>.?<3F><00>I<00><><00><><12><00><00><><00> <00><>{(m<><00>IQ<>^<00>S<00>B((<00><00>~	<00>0
xk<><00>Y<00><><00>\sv<><00><><07><00><>2<>W[N<>
<0A>h<00>!<00>Me<00>R3<><00>H<00><><00>qh<00><>t<><00><00>S<00><>q
Cm<00><03><00>_<00><00><>!	$t<>R\o <00>?O<><00>K<><00>-TX<>ַ'r<00>v<00><><00><00>T2<><00><><00>5<00><00>҉m<><00>=~h<00>L<>"<22>H<><04><00><><00><>(<00>bW<>dB0<00><>v<00>f]<5D><00><00>	<00><><00>r<00><>5<>Z<>><3E><07>
*<00>#t1<00>u&<00>/<2F><00><><00>L<00><><00><><1B>i	<1B>&<26><00><><00><>L<>$ZyX <00>ą"<22><00><><00>D<00><00><00><><11>b,<00>|<7C><00><><00>eT!<17>D3<00><><00>?<00>$gmح<00><>Cb<00><>:m<><00><>S(<00>!H8<00>X<00><><00>-L1/7q<>{Y!g<00><00><>k<00><>X@<1F>_<><00>6<00><>I<>E<><00><><00>A,<2C>f<><00><>k<>*&<00><><00>)<10><00>~s4E<00><>B8D<00><>o<>!<21>%<25><00><>w<>ʀ*<00>$oIn5w=mE<00>:<00><00><><00><>+<2B>2<00>9<00><>'<27>S<>8<>j<>h/q<><00><><00>h<00>h.hmhW%<00><>=t<00>i<00>G<00>e8<00>=<00>=>~><00><><00><>p#<00>N<00>u<00><><00><00><>I<<00><><00>ohfq<><00>C։<00><><00>d<00><00><00><>)<00>Y<00><>hN(GS<00><>	<09>zOeRFN:<<00>{<00>{<00><>C<><00><00><><00><>l<00>U9<><00>
<00>or<00><>4$}<7D>o"ש<00><00><><00>gX<><00>cʾEP;<3B><00><00><0B><00>H^p$<00>v4W<>VLQ<1C>+<2B><00>U<00><>u<00>2<00>ug<>"IAQЀ<00>9<00><00><>n1<00><>8<10><00><>&<26>6-t<00><>Pk<00>
W$%t<00><><00><>W2qHd<0E><00><><00>,y6ڣ<00><00>$<00>$t%&<00>&6'<00><>$<24>Q<><00>B<00><><00><><00>I<00><>.J~AK<><00><><00><>a<><00>U<00>NGC?<00><00>.	<17><00><><00>O<00>*<2A><00><><00><00><>7<00><><00><><00>R<00>91<>_<00><><00>'<00>+<00><><00><>TNs<>;<3B>W<><00>3<00>)4<13>,:+N<00>Gs.<00>/<00>/<00><>x8<00><>Ti<00>D<00><><00>9w#<23><00>r"<00><>?<00>><00>ZV.<00><><00>p=<3D>"<22><00>"FI>P!<00>PR<00>-9.E<><0B><00><>g<><00>6]<00><><00>%M<><00><><12>"<22><00><>s0<00>x<00><00><><00>By<1F><00>[.6Q<00><>v1<00><>m<><16><00><><1C><00><>}<7D><00>&<00><><00>tm{<00>Q<10>T!RA<00>g<00>E<00>l<00>l&mr<><00>t<00><><00>/<00>b«<00><>@~cy<00><>&;	--<2D><00><><00>O<00>R<1E>(_v<><00><><E<00>_4'<00>&߼4D<00><><00>Fi<><00>Y<00>5<00><>\<5C>x}Qt<><00><>N<>ߺ<04><00>u<00>
<00>N<00><00>lh<><00>M<00><>><3E><00><>P<>:<3A>T<><00><><00>%}<00><><17>l<><00>n<00>o/<2F><00><>a`<00>g<00>\z-<00><><14><0B><00>(<00>XoY2YbYvy<>J<>T<00>6<00><00>*<00>-{<00>+<00>E?"<22><00>/<2F><00>5<00><>-<00>%m<><00>r<00><00>{A]g<>]&<26><00>o<00><00><>ߠRP;K<00><00><><00><><00>p:i@^9s<00><><00>b<1C><00>BbU[$<16>n<><19><00><><00><><00><><00><>P<>2<><00><>mI
<0A>2<>rjm<00><><00>
<00><00>&<00><>7<>)<29>$c<00>k<00><><00><>z<>.<2E>N^<00><><00>
<00><><00><>JAM<00><>8<><00>A;$<00><>ߟO<>
<00><><00>z<00>y<15><00><><00> <00>1<00><>b<>ARʳ<00><>~9<00>E<02>
<EFBFBD><00>4<><1D>o|<19>ta<00>
<00>F"nO<00><<00>o<00>HU<00>|2Ij<><00><>7><00>rU0<>ޫ<15>զ<00><>FG)phts<00>t<00>]R<><00>L<00>Q<00><>~$,<bSl<00>ƥ<00>gK<><00><>$V6L<>w<00><><00><>6hGGE1Y7ٸ[u<00>3<00>7<00><><00>s<>H<><00><><00><>U<><00>"<00><00><><00>ltx<><00><><00><><00><><00>zF<00><><00>K<07>d<><00>il<00>\<00><17>rn<00>~w<00><>W<>5<><00>><00>>q<>K<><00><00>0/*%'<00><><00>#<00>F<00>@8<>PR`H9E<00><00><><00><><03><00><00>"'<27><00><00><>2<>L<>*ʈ<00><><00><00>.<00><>Y;<00>&K<>Iy<>><3E>q<00>><00><><00>N'<27><00>E<0F>^?<0C>Q<><00><><00><00><><00>s<00><00>8UA(<00>$<00><00><00><><00><><00>PS<00>/<00><> m"<22>b?wNY<00><>\<5C>R<>|<7C><00>^<5E>7L<00><00><>˽n<><00><>k<>l<><00>I<00>&|2]<00><00><00><><00><><00><><0F>N=l<<00><>UD*DTd<00>A~OΆw<>oE4'<27><00>G<00>E<00>}<00>y_<00>:<00>p!Ogf<00><>q<><00><00><>/	<00>.u<>4<><00><><00>gv}n<><00>v<00><>9<><00><>Q<>-<2D><00>%<00>&<00><><00>ekF<00><>G<>c<>P<00><00><00>S<00>l<00><><00>a<00>dX
S/<00>E<00>w1<00><>J<><00>5L<><00><>=<3D><00>.<00><>i<><00>qE<00><>s<><00>`eTǩe'<00><><00><><17><00><00><><00>(<00><><00><>muw)<12>q<00>Kץ݁<00><><00><><00><><00><00>3n<><00><><00><>5{<00>;X<><00>vy<>%<25>չ<00>Hfi<><<00>z&<00><00>	|g<0C>,{S<00><><01><00><>@<00><><00>I<00>q0<>g<><00><><00><>|4<00>4<00><>W<><00>a<00><><00><><00>u<00><><00>LF2<00>0<00>i<00>ZF@k<00><00><><00><><13>\<00>d<00>h;B<1D>w<>/<2F><00>8<><00>,;<3B>t<><00>PT<><0B><00><>S<><00>ZPX<00>~<00><><00><><00><>k<00>4<00>yE8<00>F<00><><1F><00>}<7D>\<5C>z%1G/<2F>D<><00><><00><><00><><00><>w<>P(_8<1E>TKy<><00><><00><><00>yO<>?2<00><>^<5E><00>d<00><>gi֪<00><><00><><00>8i<00>z<00>3<00>r-u<00><>2-U<><00><>M!<00>n<06>h<00><><00>`(3<00>\
\\<00>[?a:<3A> ]<00><><00><><00><><00><>k+<00>.D<00><>rT4<><00>U<00>h9<>
`<18><00><><00>}<00><>?7@<00>)<00>6<0B>D<><05>}<00><>7c$<24><00><00><>F&g	<09><00><00>Y<>ЗR<>FzQC<00>}
}I}<00><><00><>p<>~<7E>}j<00>9<00>
<00>W<><00><00>x@$<24>Y|<02>	<09><1F>1<><00><><00>lRD<00>Z*p<><10>qwu<00><><00>VÔ<D~	<09><00><><00><><00><00><>٨x'Y<00><>)A<00>R<00><><00><><00><>hx
.J<00><>^9<0F>*FJ<><00>5x&{cm<00>9<00>I<00><>A<0E><00><>9<00><><00><>H<>rr"L<00>b><3E>w<>i<><00><>DK<><00><><00><><17><00><00>NaLV<00><>K8<><00>N<00>*.<2E>"ACCouplingEnabled(ATDMonitorStatus_ATD@ATDMonitorStatus_AggregateStatus0ATDMonitorStatus_Devices(:ATDMonitorStatus_Distributors1<ATDMonitorStatus_OverallStatus>.ATDMonitorStatus_StatusFAccelerationNActive\6ActualRangeHighLimitPercentd4ActualRangeLowLimitPercent<00>RAddCalculatedChannel_AddCalculatedChannel<00>@AddCalculatedChannel_Calculation<00>XAddCalculatedChannel_CalculationInputChannel<00>8AddCalculatedChannel_Channel<00>@AddCalculatedChannel_Description<00>8AddCalculatedChannel_ISOCode<00>DAddCalculatedChannel_InputChannels<00>2AddCalculatedChannel_Name
AddNewDevice@AdditionalDetailsNavigateWarning+ AdditionalErrors<00>FAdmin_EditUserDetails_Page_AddTitle<00>HAdmin_EditUserDetails_Page_EditTitle<00>(Admin_SystemSettings<00>:Admin_SystemSettings_BackupDBBAdmin_SystemSettings_CancelButton
TAdmin_SystemSettings_ChannelCode_Page_InfoXAdmin_SystemSettings_ConfirmRestore_NoButtonZAdmin_SystemSettings_ConfirmRestore_YesButtonNAdmin_SystemSettings_Database_Page_InfofAdmin_SystemSettings_EditRealtimeSettings_Page_InfoLAdmin_SystemSettings_EditSettings_Page!RAdmin_SystemSettings_EditTables_Page_Info26Admin_SystemSettings_Export4FAdmin_SystemSettings_ExportSettings<DAdmin_SystemSettings_ISO_Page_InfoM6Admin_SystemSettings_ImportOFAdmin_SystemSettings_ImportSettingsW8Admin_SystemSettings_Networkh2Admin_SystemSettings_PagejTAdmin_SystemSettings_Page_AdvancedSettings{DAdmin_SystemSettings_Page_BackupDB<00>LAdmin_SystemSettings_Page_CancelButton<00>JAdmin_SystemSettings_Page_ChannelCode<00>LAdmin_SystemSettings_Page_DatabaseInfo<00>BAdmin_SystemSettings_Page_Network<00>RAdmin_SystemSettings_Page_PowerAndBattery<00>@Admin_SystemSettings_Page_QAInfo<00>DAdmin_SystemSettings_Page_Realtime<00>FAdmin_SystemSettings_Page_RestoreDB<00>HAdmin_SystemSettings_Page_SaveButtonPAdmin_SystemSettings_Page_SensorSettingsRAdmin_SystemSettings_Page_SoftwareFiltersPAdmin_SystemSettings_Page_TSRAIRSettings.@Admin_SystemSettings_Page_Tables@JAdmin_SystemSettings_Page_TestHistoryHDAdmin_SystemSettings_Page_TestInfo_8Admin_SystemSettings_Page_UInLAdmin_SystemSettings_Page_UserSettings{HAdmin_SystemSettings_PowerAndBattery<00>BAdmin_SystemSettings_QA_Page_Info<00><Admin_SystemSettings_RestoreDB<00>XAdmin_SystemSettings_RestoreOriginalSettings<00>>Admin_SystemSettings_SaveButton<00>FAdmin_SystemSettings_SensorSettings<00>HAdmin_SystemSettings_SoftwareFilters<00>FAdmin_SystemSettings_Test_Page_Info<00>BAdmin_SystemSettings_UI_Page_Info<00>BAdmin_SystemSettings_UserSettings<00>ZAdmin_Users_EditUserDetails_Page_CancelButton<00>JAdmin_Users_EditUserDetails_Page_Info<00>XAdmin_Users_EditUserDetails_Page_Permissions<00>pAdmin_Users_EditUserDetails_Page_SaveAndAddAnotherButton<00>VAdmin_Users_EditUserDetails_Page_SaveButton<00>VAdmin_Users_EditUserDetails_Page_Visibility<00>4Admin_Users_Page_AddButton<00>:Admin_Users_Page_DeleteButton6Admin_Users_Page_EditButton8All3DIRTRACCChannel
$ArmCheckList_Input
*ArmCheckList_InputLow,
8ArmCheckList_IntervalTrigger7
2ArmCheckList_LevelTriggerI
<ArmCheckList_LevelTriggerCheckX
4ArmCheckList_RunningChecksm
*ArmCheckList_SensorId}
4ArmCheckList_SensorIdCheck<00>
8ArmCheckList_SquibResistance<00>
BArmCheckList_SquibResistanceCheck<00>
0ArmCheckList_Temperature<00>
:ArmCheckList_TemperatureCheck<00>
@ArmCheckList_TemperatureLocation<00>
"ArmCheckList_Tilt<00>
8ArmCheckList_TiltSensorCheck<00>
2ArmCheckList_VoltageCheck
0ArmChecklist_BatteryHigh*ArmChecklist_Canceled+@ArmChecklist_ConfigurationFailed6&ArmChecklist_FailedQ4ArmChecklist_FailedDetailsY8ArmChecklist_FailedTriggeredo"ArmChecklist_Idle<00>,ArmChecklist_InputHigh<00>ArmChecklist_NA<00>,ArmChecklist_NotSynced<00>,ArmChecklist_Preparing<00>BArmChecklist_SensorIdNotOnChannel<00>DArmChecklist_SquibResistanceBypass
PArmChecklist_SquibResistance_SwitchToArm@RArmChecklist_SquibResistance_SwitchToSafes(ArmChecklist_Success<00>&ArmChecklist_Synced<00>0ArmChecklist_TiltFailure<00>FArmChecklist_TiltSensorDataNotFound<00>FArmChecklist_TiltSensorNoUnusedAxis<00><ArmChecklist_WaitingForCleanup"
ArmStatus_armO
&ArmStatus_configureQ
ArmStatus_doneS
 ArmStatus_failedU
&ArmStatus_failedarmW
*ArmStatus_failedstartY
.ArmStatus_failedtrigger[
(ArmStatus_flasherase]
ArmStatus_idle_
 ArmStatus_passeda
2ArmStatus_waitingforstartc
6ArmStatus_waitingfortriggere
ArmSystemDisarmg
2ArmSystemDownloadAndReArmo
(ArmSystemRecordStart<00>
0ArmSystemSoftwareTrigger<00>
.ArmSystemStopMonitoring<00>
ArmSystem_Arm<00>
&ArmSystem_ArmFailed<00>
8ArmSystem_ArmPrepareComplete<00>
&ArmSystem_ArmSystem<00>
ArmSystem_Armed ArmSystem_Arming0ArmSystem_AutoArmPrepare@ArmSystem_AutoArmPrepareComplete!@ArmSystem_AwakeWaitingForTrigger<00>6ArmSystem_BatteryLowVoltage<00>0ArmSystem_BatteryVoltage<00><ArmSystem_BatteryVoltageStatus<00>&ArmSystem_Cancelled<00>$ArmSystem_Channels<00>2ArmSystem_CheckingForDataBArmSystem_CheckingForExistingData(ArmSystem_CleaningUp-.ArmSystem_ClearingFlash<8ArmSystem_ConfigurationErrorS&ArmSystem_Configurey8ArmSystem_CurrentlyStreaming<00>ArmSystem_DAS<00>BArmSystem_DefaultFilterOutOfRange<00>$ArmSystem_Detached,RArmSystem_DisarmMissingHardwareWarningEndR$ArmSystem_Disarmed<00>ArmSystem_Done<00>.ArmSystem_DoneRecording<00>*ArmSystem_EventNumber<00>:ArmSystem_EventNumberTooLarge<00>4ArmSystem_EventUncompleted<00>4ArmSystem_ExcitationWarmup^ArmSystem_ExitRealtimeMissingHardwareWarningEnd ArmSystem_Failed}&ArmSystem_FailedArm<00>,ArmSystem_FailedDisarm<00>*ArmSystem_FailedStart<00>8ArmSystem_FailedToClearFlash<00>.ArmSystem_FailedTrigger<00>"ArmSystem_Faulted<00> ArmSystem_Faults*ArmSystem_FaultsClear!.ArmSystem_FillingBuffer0(ArmSystem_FlashErase@4ArmSystem_GettingEventInfoOArmSystem_Idlec:ArmSystem_IdleWaitingForStartl>ArmSystem_IdleWaitingForTrigger<00>,ArmSystem_InputVoltage8ArmSystem_InputVoltageStatus$0ArmSystem_IntervalLength:0ArmSystem_InvalidArmModeW8ArmSystem_InvalidEventLengthiVArmSystem_InvalidPre
|JEditCustomChannelControl_MainLocation|`EditCustomChannelControl_MainLocationCodeExpired'|JEditCustomChannelControl_NewDirection[|^EditCustomChannelControl_NewDirectionCodeExistsl|bEditCustomChannelControl_NewDirectionCodeRequired<00>|VEditCustomChannelControl_NewDirectionExists<00>|ZEditCustomChannelControl_NewDirectionRequired<00>|NEditCustomChannelControl_NewFilterClass}ZEditCustomChannelControl_NewFinLoc1CodeExists}^EditCustomChannelControl_NewFinLoc1CodeRequiredP}REditCustomChannelControl_NewFinLoc1Exists<00>}VEditCustomChannelControl_NewFinLoc1Required<00>}ZEditCustomChannelControl_NewFinLoc2CodeExists<00>}^EditCustomChannelControl_NewFinLoc2CodeRequired~REditCustomChannelControl_NewFinLoc2Exists=~VEditCustomChannelControl_NewFinLoc2Requiredp~ZEditCustomChannelControl_NewFinLoc3CodeExists<00>~^EditCustomChannelControl_NewFinLoc3CodeRequired<00>~REditCustomChannelControl_NewFinLoc3Exists<00>~VEditCustomChannelControl_NewFinLoc3Required(REditCustomChannelControl_NewFineLocation1GREditCustomChannelControl_NewFineLocation2^REditCustomChannelControl_NewFineLocation3uPEditCustomChannelControl_NewMainLocation<00>dEditCustomChannelControl_NewMainLocationCodeExists<00>hEditCustomChannelControl_NewMainLocationCodeRequired<00>\EditCustomChannelControl_NewMainLocationExists<0E>`EditCustomChannelControl_NewMainLocationRequired?<3F>ZEditCustomChannelControl_NewPhysicalDimension\<5C>nEditCustomChannelControl_NewPhysicalDimensionCodeExistsv<>rEditCustomChannelControl_NewPhysicalDimensionCodeRequired<00><>fEditCustomChannelControl_NewPhysicalDimensionExists<00><>jEditCustomChannelControl_NewPhysicalDimensionRequired<18>\EditCustomChannelControl_NewPositionCodeExists:<3A>`EditCustomChannelControl_NewPositionCodeRequiredm<>TEditCustomChannelControl_NewPositionExists<00><>XEditCustomChannelControl_NewPositionRequiredƁPEditCustomChannelControl_NewPositionTextށ`EditCustomChannelControl_NewTestObjectCodeExists<00><>dEditCustomChannelControl_NewTestObjectCodeRequired)<29>XEditCustomChannelControl_NewTestObjectExistsY<>\EditCustomChannelControl_NewTestObjectRequired<00><>TEditCustomChannelControl_NewTestObjectTe
<EFBFBD>JEditObjectTemplate_Error_NameRequired<00><>8EditObjectTemplate_LocalOnly<00><>6EditObjectTemplate_Modified<00><>:EditObjectTemplate_ModifiedBy<00><>:EditObjectTemplate_ObjectType̤>EditObjectTemplate_TemplateNameҤ:EditObjectTemplate_TestObjectؤFEditObject_Error_AllSensorsRequired<00><>FEditObject_Error_HardwareNotAllowed<1B>BEditObject_Error_HardwareRequiredS<>DEditObject_Error_SensorsNotAllowedl<>8EditObject_ExitWithoutSavingn<>HEditObject_GroupChangedByAnotherUser<00><>&EditObject_HardwareߥJEditObject_Hardware_AvailableChannels<00><>8EditObject_Hardware_Included<00><>4EditObject_Hardware_Status<00><>0EditObject_Hardware_Type<05>0EditObject_Sensors_Group<0B>DEditObject_Sensors_HardwareChannel<12>.EditObject_Sensors_Name<1F>2EditObject_Sensors_Region-<2D>6EditObject_Sensors_Required5<>2EditObject_Sensors_Sensor?<3F>.EditObject_Sensors_ZoneG<>PEditREaltimeSettings_RealtimeSampleRatesM<>>EditRealtimeSettings_ChartWidthd<>LEditRealtimeSettings_DelayBetweenPolls{<7B>TEditRealtimeSettings_DelayBetweenPollsHelp<00><>lEditRealtimeSettings_EnableDynamicRealtimeOptimization@<40><EditRealtimeSettings_HighDelayg<>DEditRealtimeSettings_HighDelayHelpx<>XEditRealtimeSettings_LevelTriggerAutoAdvance<00><>TEditRealtimeSettings_LevelTriggerBeepCountҧREditRealtimeSettings_LevelTriggerBeepIdle<00><>bEditRealtimeSettings_LevelTriggerBeepIdleInterval<05>^EditRealtimeSettings_LevelTriggerBeepIntervalMS,<2C>dEditRealtimeSettings_LevelTriggerDefaultPercentageN<>\EditRealtimeSettings_LevelTriggerFreezeTimeSecr<>dEditRealtimeSettings_LevelTriggerQualifyingSamples<00><>:EditRealtimeSettings_LowDelay<00><>BEditRealtimeSettings_LowDelayHelpŨVEditRealtimeSettings_RealtimeLevelTriggerOn~<7E>~EditRealtimeSettings_RealtimeRequireLevelTriggerCheckCompletion<00><>NEditRealtimeSettings_RealtimeSampleRate<00><>ZEditRealtimeSettings_RealtimeSampleRateSLICE6שjEditRealtimeSettings_RealtimeSampleRateSLICEStreaming<00><>\EditRealtimeSettings_RealtimeSampleRateSliceIP
<0A>^EditRealtimeSettings_RealtimeSampleRateSliceUSB.<2E>ZEditRealtimeSettings_RealtimeSampleRateTDASG5P<>>EditRealtimeSettings_SampleRatep<>FEditRealtimeSettings_SampleRateHelp}<7D>nEditRealtimeSettings_SaveSnapshotToClipboar
<EFBFBD>dEditTestSetupObjectsControl_InvalidTestObjectValue:<3A>VEditTestSetupObjectsControl_PositionInvalidH<>fEditTestSetupObjectsControl_SensorsOutOfDateWarningn<>PEditTestSetupObjectsControl_SomeChannels<00><>VEditTestSetupObjectsControl_TestObjectEmpty<00><>ZEditTestSetupObjectsControl_TestObjectInvalid<00><>\EditTestSetupObjects_SampleRateConfirmation_OK<00><>LEditTestSetupObjects_SampleRateLimited<00><>HEditTestSetupPageError_MissingSensor#<23>fEditTestSetupPage_AAFilterRateGreaterThanSampleRate}<7D>PEditTestSetupPage_AAFilterRateOutOfRangeQ<>HEditTestSetupPage_BridgeNotSupported<14>XEditTestSetupPage_BypassAAFilterNotSupportedO<>HEditTestSetupPage_CouldNotFindSensor<00><>DEditTestSetupPage_DuplicateChannel<00><>FEditTestSetupPage_DuplicateSensorId<0F>pEditTestSetupPage_Error_DASSampleRatesNotEvenlyDivisibleM<>NEditTestSetupPage_Error_MustUpdateFirst<>VEditTestSetupPage_Error_NoChannelsToCollect<00><>HEditTestSetupPage_EventLengthTooLong<00><>LEditTestSetupPage_HardwareAlreadyInUse)<29>^EditTestSetupPage_HardwareDoesNotSupportAutoArmm<>bEditTestSetupPage_HardwareDoesNotSupportStreaming<00><>PEditTestSetupPage_ISOCodeAlreadyAssigned<00><>`EditTestSetupPage_IncompatibleSensorNotSupported<01>fEditTestSetupPage_InvalidDigitalFilteringSampleRateb<>BEditTestSetupPage_InvalidHardware<1E>JEditTestSetupPage_InvalidNavigateAway<00><>hEditTestSetupPage_LevelTriggerToLowForWakeupOnMotion<00><><00>EditTestSetupPage_LevelTriggersNotSupportedWithMultipleSampleRatesP<>NEditTestSetupPage_LevelTriggersRequired<00><>HEditTestSetupPage_MissingCalibration<00><>FEditTestSetupPage_MissingExcitation<00><>>EditTestSetupPage_MissingSensor(<28>REditTestSetupPage_MissingSensorAssignmentV<>NEditTestSetupPage_MissingUnitConversion<00><>VEditTestSetupPage_MultipleDuplicateISOcodes<00><>PEditTestSetupPage_NeedMoreAnalogChannels@<40>\EditTestSetupPage_NeedMoreDigitalInputChannels<00><>^EditTestSetupPage_NeedMoreDigitalOutputChannels<00><>NEditTestSetupPage_NeedMoreSquibChannels <20>DEditTestSetupPage_NoChannelsInTeste<>@EditTestSetupPage_NoGroupsInTest<00><>DEditTestSetupPage_NoHardwareInTest<00><>TEditTestSetupPage_NoPhysicalHardwareInTest<00><>FEditTestSetupPage_NoSensorOnChannel(<28>PEditTestSetupP
Error<00><>8ErrorCommunicatingWithDevice<00><> ErrorDownloading<00><>@Error_CopyAndTrimEndAndStartSame<00><><Error_CopyAndTrimEndGreaterMax<00><><Error_CopyAndTrimStartAfterEnd<17>:Error_CopyAndTrimStartLessMin=<3D><Error_FailedToStartDownloadingg<><Error_InvalidLevelTriggerValue<00><>Error_NoNetwork<03>NError_RecordingModeDoesntSupportAutoArm:<3A>6Error_SensorCalibrationNone<>FError_SensorCalibrationNotSupported<00><>^Error_SensorNoCalibrationExcitationNotSupported<00><>ErrorsT<>&EventLinesTable_DAS\<5C>,EventLinesTable_Faileda<>*EventLinesTable_Starti<>,EventLinesTable_Statusp<>.EventLinesTable_Successx<>.EventLinesTable_Trigger<00><>6EverythingTable_ChannelName<00><>2EverythingTable_GroupName<00><>.EverythingTable_ISOCode<00><>0EverythingTable_Polarity<00><>*EverythingTable_Range<00><>4EverythingTable_SensorName<00><><EverythingTable_SoftwareFilter<00><>:EverythingTable_TestSetupName<00><>0EverythingTable_UserCode<00><>DExceptionWhileCheckingSafetySwitch<00><>2ExcitationVoltageOption_1!<21>4ExcitationVoltageOption_16=<3D>2ExcitationVoltageOption_2P<>4ExcitationVoltageOption_32e<>2ExcitationVoltageOption_4y<>2ExcitationVoltageOption_8<00><>ExcludeSelected<00><>*ExportCSVLoadSettings<00><>*ExportCSVSaveSettings<00><>HExportDASRecordControl_DataRecorders<00><>XExportDASRecordControl_ExportDASBrowseButton<00><>BExportDASRecordControl_ExportFile<00><>LExportDASRecordControl_SelectAllButton<00><>NExportDASRecordControl_SelectNoneButton<05>@ExportDASRecordPage_ExportButton<10>ExportDataADC<18>,ExportDataBrowseFolder<1D>4ExportDataCSVFilteredLabel%<25><ExportDataDiademChannelName200,<2C>:ExportDataDiademReserved1_301G<>:ExportDataDiademReserved2_302`<60><ExportDataDiademUserComment201y<>$ExportDataFiltered<00><>2ExportDataISOBrowseFolder<00><>8ExportDataISOColumnSeparator<00><>(ExportDataISOComment<00><>*ExportDataISOComments<00><>:ExportDataISOCustomerCostUnit<00><>2ExportDataISOCustomerName<00><>4ExportDataISOCustomerOrder<00><>@ExportDataISOCustomerOrderNumberJExportDataISOCustomerProjectRefNumberLExportDataISOCustomerTestEngineerEmail9HExportDataISOCustomerTestEngineerFaxWJExportDataISOCustomerTestEngineerNamesLExportDataISOCustomerTestEngineerPhone<00>DExportDataISOCustomerTestRefNumber<00>.ExportDataISODateOfTest<00>6Export
2ExportSensorsCancelButton1
>ExportSensorsControl_DataPROXML9
<ExportSensorsControl_EQXFormatF
BExportSensorsControl_ExportFormatK
2ExportSensorsControl_FileZ
6ExportSensorsControl_Folder`
LExportSensorsControl_NoSensorsSelectedh
BExportSensorsControl_SlicewareXML<00>
DExportSensorsControl_TDCOnlyExport<00>
XExportSensorsControl_TDCSensorDatabaseFormat<00>
8ExportSensorsControl_Waiting2ExportSensorsExportStatus+4ExportSensorsUserCancelled3>ExportSensors_BackingupExistingI(ExportSensors_Browsec.ExportSensors_Cancelledk$ExportSensors_Donev,ExportSensors_DoneFull|(ExportSensors_Failed<00>.ExportSensors_FileInUse<00>$ExportSensors_Info<00>.ExportSensors_SelectAll
0ExportSensors_SelectNone6ExportSensors_WritingHeader*ExportSettings_Browse/6ExportSettings_BrowseFilter74ExportSettings_Descriptiont&ExportSettings_Done<00>2ExportSettings_ExportFile<00>*ExportSettings_Failed<00>FExportSettings_FileOverwriteWarning<00>.ExportSettings_Included<00>&ExportSettings_Type
,ExportSettings_Waiting
,ExportSettings_Working
:ExportTestCSVOptions_DataType 
@ExportTestCSVOptions_DataTypeADC+
NExportTestCSVOptions_DataTypeFilteredEU?
RExportTestCSVOptions_DataTypeUnfilteredEUL
0ExportTestCSVOptions_End[
HExportTestCSVOptions_IndividualFilese
4ExportTestCSVOptions_Start<00>
>ExportTestCSVOptions_TimeColumn<00>
.ExportTestOption_Format<00>
4ExportTestOption_FormatCSV<00>
:ExportTestOption_FormatDiadem<00>
4ExportTestOption_FormatISO<00>
8ExportTestOption_FormatSomat<00>
6ExportTestOption_FormatTDAS<00>
4ExportTestOption_FormatTSV:ExportTestOption_FormatToyota
^ExportTestSetup_AddUnusedCustomChannelsToExport,ExportTestSetup_Browse68ExportTestSetup_BrowseFilter>8ExportTestSetup_CustomerNamer6ExportTestSetup_Description|(ExportTestSetup_Done<00>4ExportTestSetup_ExportFile<00>,ExportTestSetup_Failed<00>HExportTestSetup_FileOverwriteWarning<00>2ExportTestSetup_Importing0ExportTestSetup_Included(ExportTestSetup_Name.ExportTestSetup_Reading!.ExportTestSetup_Waiting*.ExportTestSetup_Working3ExportTest_TCF<(Export_ASCExportInfoA(Export_CSVExportInfoF Export_CancelledW4Export_Chapter10ExportInfoi.Export_DIADEMExportInfou&Export_DataTooLarge<00>,Export_Data_Page_Title<00>.Export_ExportDataButton<00>(Export_HDFExportInfo<00>(Export_ISOExportInfo<00>8Export_MustSelectPCMOrAnalog<00>(Export_NoROISelected)Export_Other]Export_Pathd$Export_PathTooLongsVExport_PreExistingExportFileDeletionWarning<00>,Export_ROI_No_Channels<00>DExport_StatusCalculatingExport
@ExpressTestSetup_ChannelCapacity6ExpressTestSetup_ChannelDASFExpressTestSetup_ChannelDescription!>ExpressTestSetup_ChannelDetails.FExpressTestSetup_ChannelFilterClass?>ExpressTestSetup_ChannelISOCodeM<ExpressTestSetup_ChannelModuleV@ExpressTestSetup_ChannelNotFound^<ExpressTestSetup_ChannelNumber<00>@ExpressTestSetup_ChannelPosition<00>:ExpressTestSetup_ChannelRange<00>DExpressTestSetup_ChannelTestObject<00>DExpressTestSetup_ChannelUnassigned<00>0ExpressTestSetup_Connect<00>HExpressTestSetup_CreateCustomChannel<00>:ExpressTestSetup_CreateSensor<00>(ExpressTestSetup_DAS<00>BExpressTestSetup_DuplicateISOCode<00>JExpressTestSetup_FoundIncludedSensors6ExpressTestSetup_ISOChannel-FExpressTestSetup_ISOChannelPosition7FExpressTestSetup_ISOChannelSelectorAJExpressTestSetup_ISOChannelTestObjectW>ExpressTestSetup_ISOChannelTyped<00>ExpressTestSetup_MultipleChannelsOfDifferentChannelTypesOnSameTestObjects*ExpressTestSetup_Name<00>.ExpressTestSetup_Phase1<00>.ExpressTestSetup_Phase2<00>.ExpressTestSetup_Phase3<00>8ExpressTestSetup_Phase3NoISO.ExpressTestSetup_Phase45.ExpressTestSetup_Phase5N*ExpressTestSetup_Pingf2ExpressTestSetup_Polarityl>ExpressTestSetup_ReRunChallengevJExpressTestSetup_SaveAddAnotherSensor<00>6ExpressTestSetup_SaveSensor<00>.ExpressTestSetup_Search<00>.ExpressTestSetup_Sensor<00><ExpressTestSetup_SensorDetails<00>0ExpressTestSetup_SensorsBExpressTestSetup_SensorsAvailable.ExpressTestSetup_TestID$`ExpressTestSetup_TestIDCantContainCSVISORealtime[>ExpressTestSetup_TestIdRequired<00>6ExpressTestSetup_TestObject<00>4ExpressTestSetup_TestSaved<00>>ExpressTestSetup_UnassignSensor<00>FExpressTestSetup_UseExistingChannel<00>4ExtraEIDsTable_ChannelName<00>$ExtraEIDsTable_EID<00>2ExtraEIDsTable_SensorName<00>"FactoryHasChangedFailedg2FailedEnableFaultCheckingoFailedToArm<00>&FailedToBackupLocal<00>>FailedToBackupLocalFileNotFound<00>.FailedToConnectRemoteDb<00>FailedToCopy	2FailedToExportHistoryFile,.FailedToGenerateROIDataK$FailedToObtainLocky8FailedToPushGroupToTestSetup<00>(FailedToReadSettings<00> FailedToSaveTest<00>$FailedToUpdateLock<00>*FailedToWriteSettings6Failed
"0FollowingUnitsInRealtimeC"*FollowingUnitsMissing~"0FollowingUnitsNANDIssues<00>"*FollowingUnitsNotInDb<00>".FollowingUnitsNotInTest%#6FollowingUnitsReadyToStreamu#.FollowingUnitsStreaming<00>#*Footer_DASUnavailable<00>#0Footer_DbModifiedWarning<00>#Footer_Login<00>#6Footer_PrimaryDBUnavailable$"ForbiddenTestName$G5D$
G5VDSH$GainR$ GettingTestSetupX$"GettingTestSetupsl$"Graph_PFSZoomHelp<00>$Graph_PFSZooms<00>$$Graph_SquibCurrent<00>$$Graph_SquibVoltage<00>$
Group<00>$GroupInUse<00>$GroupInUse2X%&GroupInUseChallenge<00>%GroupNotFoundb&GroupTagss&\GroupTemplateBasicInfoControl_TypeConfirmation<00>&HGroupTemplateControl_CreateNewButton<00>&JGroupTemplateControl_IsACustomChannel<00>&BGroupTemplateControl_ModifyButton<00>&:GroupTemplateControl_Multiple<00>&DGroupTemplateControl_TotalChannels'&GroupTemplate_InUse2'JGroupsHadChannelsAssignedToUnknownDAS|'2HDFExportOption_ExportADC<00>'0HDFExportOption_ExportEU<00>'0HDFExportOption_ExportMV<00>'6HDFExportOption_IncludeLogs<00>'<HDFExportOption_IncludeReports(8HDFExportOption_IncludeSetup(0HDFExport_MethodRequired,(HICc(HIC_HEADXh(HIC_HEADYx(HIC_HEADZ<00>(HIC_LengthMS<00>(FHardwareChannel_CalibrationNotFound<00>(RHardwareChannel_SensorVoltageNotSupported<00>(2HardwareChannelsTable_DAS))BHardwareChannelsTable_IEPESupport.)PHardwareChannelsTable_LogicalChannelName4)8HardwareChannelsTable_Module=)RHardwareChannelsTable_PhysicalChannelNameE)8HardwareChannelsTable_SensorK)RHardwareDiscoveryControl_600kSampleConfigS)RHardwareDiscoveryControl_700kSampleConfige)RHardwareDiscoveryControl_800kSampleConfigw)8HardwareDiscoveryControl_Add<00>)>HardwareDiscoveryControl_AddNew<00>)JHardwareDiscoveryControl_AddUpdateDAS<00>)>HardwareDiscoveryControl_Analog<00>):HardwareDiscoveryControl_AtIP<00>)JHardwareDiscoveryControl_AvailableDAS<00>)BHardwareDiscoveryControl_Channels<00>)NHardwareDiscoveryControl_ChannelsColumn<00>)LHardwareDiscoveryControl_Configuration<00>)FHardwareDiscoveryControl_ConnectDAS<00>)LHardwareDiscoveryControl_ConnectPassed*DHardwareDiscoveryControl_Connected*JHardwareDiscoveryControl_ConnectedDAS*THardwareDiscoveryControl_ContinuousPingOffA*RHardwareDiscoveryControl_ContinuousPingOnF*NHardwareDiscoveryControl_CurrentDASListJ*8HardwareDiscoveryControl_DAS\*HHardwareDiscoveryControl_DASChannelsa*NHardwareDiscoveryControl_DASImageSourceo*DHardwareDiscoveryControl_DASStatusq*@HardwareDiscoveryControl_DASTypey*FHardwareDiscoveryControl_DigitalOut*PHardwareDiscoveryControl_DisassociateDAS<00>*PHardwareDiscoveryControl_DiscoverableDAS+PHardwareDiscoveryControl_FailedToConnect7+PHardwareDiscoveryControl_FailedUnitArmedS+<H
4<00>Hardware_DataRecorders_HardwareDiscovery_Page_RunTestSetupButton4pHardware_DataRecorders_HardwareDiscovery_Page_ScanButton$4~Hardware_DataRecorders_HardwareDiscovery_Page_SetHardwareButton44JHardware_DataRecorders_Page_AddButtonI4`Hardware_DataRecorders_Page_AutoDetectAutoButtonN4XHardware_DataRecorders_Page_AutoDetectButtonZ4dHardware_DataRecorders_Page_ConfirmDelete_NoButtonm4fHardware_DataRecorders_Page_ConfirmDelete_YesButtonq4`Hardware_DataRecorders_Page_DASUsageReportButtonv4VHardware_DataRecorders_Page_DeleteAllButton<00>4PHardware_DataRecorders_Page_DeleteButton<00>4LHardware_DataRecorders_Page_EditButton<00>4PHardware_DataRecorders_Page_ExportButton<00>4PHardware_DataRecorders_Page_ImportButton<00>4JHardware_DataRecorders_Page_RunButton<00>4BHardware_DataRecorders_Page_Title<00>4JHardware_Diagnostics_Page_ApplyConfig<00>4LHardware_Diagnostics_Page_CancelButton<00>4BHardware_Diagnostics_Page_DASList<00>4JHardware_Diagnostics_Page_Diagnostics<00>4PHardware_Diagnostics_Page_NextStepButton<00>4PHardware_Diagnostics_Page_PrevStepButton<00>4DHardware_Diagnostics_Page_Realtime<00>4NHardware_G5DockingStationMissingWarning5.Hardware_PostTestCancel<00>52Hardware_PostTestContinue6DHardware_PostTestDiagWillBeSkipped6tHardware_SensorModels_EditSensorModelDetails_Page_AddTitle<00>6|Hardware_SensorModels_EditSensorModelDetails_Page_CancelButton<00>6vHardware_SensorModels_EditSensorModelDetails_Page_EditTitle<00>6lHardware_SensorModels_EditSensorModelDetails_Page_Info<00>6tHardware_SensorModels_EditSensorModelDetails_Page_Overview<00>6<00>Hardware_SensorModels_EditSensorModelDetails_Page_SaveAndAddAnotherButton<00>6xHardware_SensorModels_EditSensorModelDetails_Page_SaveButton<00>6rHardware_SensorModels_ImportSensorModels_Page_CloseButton<00>6HHardware_SensorModels_Page_AddButton<00>6bHardware_SensorModels_Page_ConfirmDelete_NoButton<00>6dHardware_SensorModels_Page_ConfirmDelete_YesButton<00>6NHardware_SensorModels_Page_DeleteButton<00>6JHardware_SensorModels_Page_EditButton7NHardware_SensorModels_Page_ImportButton76Hardware_SensorModels_Title7NHardware_Sensors_BulkEdit_Page_AddTitle%7PHardware_Sensors_BulkEdit_Pa
HighV <HighgLinearAcc*<Home=<4Homepage_AdditionalDetailsC<.Homepage_AdministrativeW<2Homepage_CalibrationCheckg<0Homepage_ChangeTestSetup~<,Homepage_CheckHardware<00><2Homepage_ConfigureObjects<00><.Homepage_CustomChannels<00><0Homepage_CustomerDetails<00><,Homepage_DataRecorders<00><(Homepage_Diagnostics<00><*Homepage_DownloadData<00><&Homepage_ExportData<00><"Homepage_Hardware
=&Homepage_Labdetails=Homepage_Logout!=(Homepage_ManageUsers)= Homepage_Prepare7=2Homepage_QuickSensorCheck@=*Homepage_RealtimeModeP=6Homepage_RealtimeModeStress`=Homepage_Recordq=Homepage_Reviewy= Homepage_RunTest<00>=.Homepage_SensorDatabase<00>=*Homepage_SensorModels<00>=0Homepage_StatusLineCheck<00>=.Homepage_SystemSettings<00>=8Homepage_TestEngineerDetails<00>=(Homepage_TestObjects<00>=&Homepage_TestSetups<00>="Homepage_ViewData<00>=IENA_Key	>IENA_SourcePort>*IEPESupport_Available > IEPESupport_IEPE+>0IEPESupport_NotAvailable1>*IMPORT_NormalizingIds@>4IMPORT_ReadingCalibrationsQ>,IMPORT_ReadingChannels_>:IMPORT_ReadingCustomerDetailsi>:IMPORT_ReadingEngineerDetails{>(IMPORT_ReadingGroups<00>>,IMPORT_ReadingHardware<00>>0IMPORT_ReadingLabDetails<00>>*IMPORT_ReadingSensors<00>>0IMPORT_ReadingTestSetups<00>>&IMPORT_ReadingUsers<00>>"IMPORT_ReadingXML<00>>INIBrowseFilter<00>>ISO? ISOMMEDbNotFound?2ISOSuportLevel_Transitory:?.ISOSupportLevel_ISOOnlyX?*ISOSupportLevel_NoISOc?0ISOTestSetupImportFilterk?FImportDASRecordControl_BrowseButtonM@HImportDASRecordControl_DataRecordersU@BImportDASRecordControl_ImportFilee@LImportDASRecordControl_SelectAllButtonr@NImportDASRecordControl_SelectNoneButton@@ImportDASRecordPage_ImportButton<00>@"ImportISOSettings<00>@@ImportObjectInfoControl_Advanced<00>@BImportObjectInfoControl_BasicInfo<00>@PImportObjectInfoControl_BridgeResistance<00>@>ImportObjectInfoControl_CalDate<00>@@ImportObjectInfoControl_Capacity<00>@@ImportObjectInfoControl_Channels<00>@>ImportObjectInfoControl_Comment<00>@>ImportObjectInfoControl_Details<00>@BImportObjectInfoControl_Dimension<00>@BImportObjectInfoControl_DirectionA6ImportObjectInfoControl_EIDAPImportObjectInfoControl_EngineeringUnitsA<ImportObjectInfoControl_Errors*ADImportObjectInfoControl_Excitation2AJImportObjectInfoControl_ISOObjectType>ANImportObjectInfoControl_NewTemplateNameOADImportObjectInfoControl_ObjectNameQA@ImportObjectInfoControl_PolaritymAHImportObjectInfoControl_ProportionalwAFImportObjectInfoControl_Sensitivity<00>ADImportObjectInfoControl_SensorType<00>A.ImportObjectInfo_Browse<00>A*ImportObjectInfo_File<00>AHImportObjectInfo_FineLocationNotInDb<00>
M>ImportSensors_InvalidExcitation%M@ImportSensors_InvalidSensitivityHM,ImportSensors_Multiple<00>MBImportSensors_NoValidCalibrations<00>M0ImportSensors_SelectFile<00>M:ImportSettings_GlobalSettings<00>M<ImportSettings_SettingsMissing<00>MNImportSettings_TestSetupDefaultSettings<00>M8ImportSettings_TotalImported!NDImportTTS_DoneButtonUnsavedChanges4N@ImportTTS_EditFileUnsavedChanges<00>N0ImportTTS_SensorNotFound<00>N2ImportTTS_TestNotCompleteOLImportTestObjects_DoneWithoutImporting5O,ImportTestSetup_Browse<00>O2ImportTestSetup_Challenge<00>OJImportTestSetup_CheckOutTestSetupNamePRImportTestSetup_CouldNotGenerateAnISOCode%P<ImportTestSetup_CustomChannelsRP6ImportTestSetup_DescriptioniPLImportTestSetup_DuplicateSensorWarningvP&ImportTestSetup_EID<00>PTImportTestSetup_GM_Default_Creation_String<00>P<ImportTestSetup_GroupTemplatesQ,ImportTestSetup_GroupsQ8ImportTestSetup_GroupsLockedQ0ImportTestSetup_HardwareSQ.ImportTestSetup_INIFileXQDImportTestSetup_ISF_DIModeNotFoundfQbImportTestSetup_ISOTestObjectNotFoundInImportFile<00>Q4ImportTestSetup_ImportFile<00>R0ImportTestSetup_Included<00>RLImportTestSetup_InvalidCustomerDetails<00>RBImportTestSetup_InvalidLabDetails<00>RTImportTestSetup_InvalidTestEngineerDetails2S0ImportTestSetup_LocationxSLImportTestSetup_MissingAndExtraSensors<00>S>ImportTestSetup_MissingHardware<00>S<ImportTestSetup_MissingSensors<00>SlImportTestSetup_MultipleEventsRecordingModeUnsupported<00>S,ImportTestSetup_NumberT2ImportTestSetup_OverwriteTFImportTestSetup_OverwriteTestSetups#T@ImportTestSetup_RunTestSetupName<00>T>ImportTestSetup_SensorTemplates<00>T.ImportTestSetup_Sensors<00>T8ImportTestSetup_SensorsExtra<00>T8ImportTestSetup_SensorsFound<00>T:ImportTestSetup_SensorsLockedU<ImportTestSetup_SensorsMissing<U8ImportTestSetup_SensorsTotalMU8ImportTestSetup_SerialNumber\U:ImportTestSetup_TestSetupNamejU4ImportTestSetup_TestSetups{U6ImportTestSetup_TestsLocked<00>U(ImportTestSetup_Type<00>UPImportTestSetup_UnsupportedRecordingMode<00>UDImportTestSetup_UnsupportedVersion<00>U:ImportTestSetup_UserCancelledV>ImportTestSetup_ValidationError%V.ImportTestSetup_WorkingnV6ImportTestSetup_btnCheckoutwV4ImportTestSetu
Mixed<00>u:ModalAutoArmPrepareCompleteOK<00>u(ModalConfirmCancelNov*ModalConfirmCancelYesv$ModalConfirmSkipNov&ModalConfirmSkipYesv"ModalDASIsArmedOKv*ModalDASIsAutoArmedOKv2ModalDASIsReadyToStreamOKv*ModalDASIsStreamingOK v8ModalDIADEMExportOverwriteNo$v:ModalDIADEMExportOverwriteYes(v"ModalDisarmCancel-vModalDisarmOK5v8ModalDownloadOverwriteCancel9v0ModalDownloadOverwriteNoAv0ModalDownloadOverwriteOKCv2ModalDownloadOverwriteYesGv4ModalDuplicateSensorCancelIv,ModalDuplicateSensorOKQvHModalExcessiveResistanceChangeCancelUv@ModalExcessiveResistanceChangeOK]v6ModalHomeSetLowPowerConfirmav<ModalHomeSetLowPowerConfirm_No3w>ModalHomeSetLowPowerConfirm_Yes7w2ModalISOExportOverwriteNo<w4ModalISOExportOverwriteYes@w4ModalIncompatibleSensorsOKEw6ModalMismatchDownloadCancelIw8ModalMismatchDownloadProceedQw&ModalNoTestSetupsOKZw4ModalPartialDownloadCancel^w6ModalPartialDownloadProceedfw2ModalPartialDownloadRetryow2ModalRDFExportOverwriteNovw4ModalRDFExportOverwriteYeszw*ModalTooManySensorsOKw8ModalToyotaExportOverwriteNo<00>w:ModalToyotaExportOverwriteYes<00>w2ModalUserPrompt_ARM_Retry<00>w4ModalUserPrompt_Arm_Cancel<00>w,ModalUserPrompt_Arm_OK<00>w,ModalUserPrompt_Cancel<00>w0ModalUserPrompt_Continue<00>w,ModalUserPrompt_Delete<00>w0ModalUserPrompt_Download<00>w0ModalUserPrompt_NoDAS_OK<00>w0ModalUserPrompt_NoDataOK<00>wJModalUserPrompt_NonIncludedDAS_Cancel<00>wNModalUserPrompt_NonIncludedDAS_Continue<00>w$ModalUserPrompt_OK<00>w:ModalUserPrompt_PresentCancel<00>w2ModalUserPrompt_PresentOK<00>wFModalUserPrompt_SAFEWarning_Proceed<00>wBModalUserPrompt_SAFEWarning_Retry<00>w4ModalUserPrompt_SAFE_Retry<00>wModifiedxModifiedByxBModifyChannel_ApplyDataFlagButtonxHModifyChannel_ApplyDescriptionButton$x>ModifyChannel_ApplyFilterButton+x@ModifyChannel_ApplyLineFitButton2xFModifyChannel_ApplyMultiplierButton9x>ModifyChannel_ApplyOffsetButton@x@ModifyChannel_ApplyT0ToDASButtonGxBModifyChannel_ApplyT0ToTestButtonUx6ModifyChannel_DataFlagLabeldx<ModifyChannel_DescriptionLabelox2ModifyChannel_FilterLabel|x:ModifyChannel_MultiplierLabel<00>x2ModifyChannel_OffsetLabel<00>xDModifyChannel_PreviewLineFitButton<00>x*ModifyChannel_T0
Needs}y<NetworkDevices_Slice_IPAddress<00>y:NetworkDevices_TDAS_IPAddress<00>y,NeverOverwriteTestData<00>yNoClockMasters<00>yNoDB_ACCESS,zNoDataChannels<00>z.NoDevicesWithDataForROI<00>zNoEventWarning{NoPushWarning2{8NoRealtimeChannels_Available~|NoRowSelected<00>|NoSelectedItems<00>|*NoTestSetupsAvailable<00>|RNonISOChannelsControl_DescriptionRequired<00>|6NonISOTestSetupImportFilter1}XNonIsoChannelsControl_DescriptionButNoSensor<~JNonLinearStyle_IRTraccAverageOverTimel~>NonLinearStyle_IRTraccCalFactor<00>~JNonLinearStyle_IRTraccDiagnosticsZero<00>~8NonLinearStyle_IRTraccManual<00>~<NonLinearStyle_IRTraccZeroMMmV<00>~2NonLinearStyle_Polynomial<00>~@NotAllChannelsHaveLevelTriggeredNotImplemented<00>,NotModifiedNotComplete<00>NothingToExport-<2D>OK@<40>OfflineD<>>OffsetToleranceHigh_DescriptionM<>>OffsetToleranceHigh_DisplayName<00><><OffsetToleranceLow_DescriptionҀ<OffsetToleranceLow_DisplayNameE<>OffsetType[<5B>OnboardHumidityh<>6OverdueSensorsTable_CalDatez<><OverdueSensorsTable_CalDueDate<00><>@OverdueSensorsTable_CalInternval<00><>>OverdueSensorsTable_CalInterval<00><>`OverdueSensorsTable_CalibrationDateOverdueOrNear<00><>>OverdueSensorsTable_Description<00><>6OverdueSensorsTable_Message<00><>LOverdueSensorsTable_MissingCalibrationɁ@OverdueSensorsTable_SerialNumber<00><><OverdueSensorsTable_TestObject<00><>VOverdueSensors_CalibrationDateOverdueOrNear<00><>PCMFormat0<>PPRO<<3C>,PageButtonControl_SAVEB<>:PageButtonControl_SaveAndExitJ<>"PageButton_CancelY<>$PageButton_Refresha<> PageButtons_Backj<>0PageContentHeader_Searchp<>0PageContentHeader_Selectx<>.PageError_AutoArmStatus<00><>PageFooter_Back<00><>PageFooter_Home<00><>6PageHeaderRibbon_GenericAdd<00><>8PageHeaderRibbon_GenericEditĂ.PageHeaderRibbon_TestIdς4PageHeaderRibbon_TestSetupڂPage_Cancelled<00><>$Page_UserCancelled<00><>Passed<06> PossibleChannels<0E>6PostTestDiagnosticsSomeWarn!<21>.PowerAndBattery_Batteryc<>,PowerAndBattery_DIRDKRl<>&PowerAndBattery_ECMu<>,PowerAndBattery_Falcon<00><>2PowerAndBattery_G5InDummy<00><>*PowerAndBattery_G5VDS<00><>*PowerAndBattery_INPUT<00><>2PowerAndBattery_MicroPlus<00><>0PowerAndBattery_NanoPlusσ0PowerAndBattery_PowerPRO܃&PowerAndBattery_SDB<00><>&PowerAndBattery_SLD<00><>&PowerAndBattery_SLE<08>,Powe
Ready<00><>ReadyToStream<00><>JRealtimeLoggingDisabledMultipleCharts<00><>4RealtimeNavStepAction_Next)<29>4RealtimeNavStepAction_Prev/<2F> RealtimeTags_ALL5<>Realtime_AAF:<3A>Realtime_AVE?<3F>8Realtime_ChartWidthInSecondsC<>Realtime_ChartsT<>>Realtime_CollapseOscChannelInfo\<5C>Realtime_Filterw<>*Realtime_HideSettingsy<>Realtime_High<00><>$Realtime_LoggingON<00><>Realtime_Low<00><>Realtime_MAX<00><>Realtime_MIN<00><>"Realtime_MaxDelay<00><>Realtime_Medium<00><>"Realtime_MinDelay<00><>Realtime_NextXʞ"Realtime_NoFilterݞ"Realtime_Polarityߞ*Realtime_PollInterval<00><>Realtime_PrevX<00><> Realtime_Restart<10>&Realtime_SampleRate"<22>"Realtime_Settings/<2F>6Realtime_ShowOscChannelInfo9<>*Realtime_ShowSettingsP<>(Realtime_StartSignal_<>(Realtime_StreamErrorm<>,Realtime_TriggerSignal(<28>*Realtime_UnitsChanged8<>FRealtime_UnitsChangedRealtimeEnding<00><>Record_ADC<00><>Record_AddGraph<00><>(Record_AlignZeroTime<00><>@Record_AreYouSureYouWantToCancel<02>Record_Army<>&Record_ArmChecklist~<7E>Record_Attach<00><>.Record_AutoZeroRealtime<00><>4Record_AutomaticModeStatus<00><> Record_BasicInfo¡&Record_CancelButtonΡ:Record_CheckHardwareRunButtonԡ"Record_CloseGraphܡ6Record_CollectDataRunButton<00><>Record_Detach<00><>$Record_Diagnostics<00><>6Record_DiagnosticsRunButton	<09>Record_Disarm<11>"Record_Disautoarm<19> Record_Disstream(<28>$Record_DownloadALL8<>&Record_DownloadDataF<>:Record_DownloadData_RunButtonU<>$Record_DownloadROI]<5D>Record_EUk<> Record_EditGroupo<>@Record_EditGroup_Page_HomeButton<00><>@Record_EditGroup_Page_SaveButton<00><>"Record_EditSensor<00><>BRecord_EditSensor_Page_HomeButton<00><>BRecord_EditSensor_Page_SaveButton<00><>Record_Export<00><> Record_ExportALL<00><> Record_ExportROI<00><>.Record_ExpressTestSetupʢ&Record_FinishButton֢"Record_FullScreenޢRecord_Hardware<00><>"Record_HomeButton<00><>Record_Logging<00><>Record_LowPower<0C>Record_MMode<17>Record_MV#<23><Record_MeasureSquibResistances'<27>*Record_NextStepButtonB<>Record_NextXM<>Record_OModeU<>Record_Pause_<>0Record_PauseResumeButtonw<>*Record_PausedBySystem<00><>&Record_PausedByUser<00><>4Record_PostTestDiagnostics<00><>*Record_PrevStepButtonȣRecord_PrevXӣ.Record_QuickSensorCheckۣRecord_Realtime<00><>0Record_RealtimeRunButton<00><>JRecord_RecoveryDownloadButtonDisabled<00><>HRecord_R
S6ABR<00>S6DB<08>
S6DB3<0E>SLD<15>SLE<1A>0SLICE6AirConnectionsHelp<1F>,SLICE6AirConnectorHelp7<>:SLICE6AirTc_ReconfigureNeededM<>SLICE6DB<00><>SLICE6DB3<00><>SLICE6DB_AIR<00><> SLICE6DB_InDummy<00><>:SLICE6SAirSensorInterfaceHelp<00><>2SLICE6SensorInterfaceHelp<19>SLICE6_AIR2<>SLICE6_AIR_BR?<3F>SLICE6_BaseO<>4SLICEBridgeConnectionsHelpX<>SLICELAB_TOMr<>SLICEPRODB<00><>(SLICEPROLAB_Ethernet<00><>SLICEPRO_DIM<00><>SLICEPRO_SIM<00><>SLICEPRO_SLD<00><>SLICEPRO_SLS<00><>SLICEPRO_TOM<00><>6SLICEProSensorInterfaceHelp<03>SLS<1F>SLT$<24>SPD)<29>SPDB.<2E>SPS4<>SPT9<>SameAsDownload><3E>,SampleRateNotAvailableY<>&SaveSensorChallenge<00><>
Saved<00><>(ScanningForPowerLoss<00><>.ScanningPeaksAndTroughs<02>"Scheduled_Overdue"<22>.Scheduled_RemainingTimeA<>$ScreenShotCapturedo<>ScriptsFolder<00><>Search<00><>$SelectSelectedDest<00><>(SelectSelectedSource<00><>.SensitivityCanNotBeZero<00><>8SensitivityControl_AddLinear<00><>ZSensitivityControl_AddedLinearISOSameAsParent<08>*SensitivityControl_AtN<>2SensitivityControl_AveEnd[<5B>6SensitivityControl_AveStartp<>DSensitivityControl_AverageOverTime<00><>4SensitivityControl_CalDate<00><>bSensitivityControl_CalFactorLinearizationExponent<00><>DSensitivityControl_CalFactorMMperV<00><>DSensitivityControl_CalibrationDate<00><>HSensitivityControl_CalibrationFactor<00><>JSensitivityControl_CalibrationHistory<00><>TSensitivityControl_CalibrationHistory_Note<07>LSensitivityControl_CalibrationInterval
<0A>DSensitivityControl_CalibrationNote*<2A>:SensitivityControl_CapacityEU<<3C>4SensitivityControl_DetailsK<>8SensitivityControl_DocumentsT<>\SensitivityControl_HasBeenUsedSinceCalibrationa<>VSensitivityControl_IEPERequiresLinearRecord<00><>TSensitivityControl_IRTRACCCalFactorFormulaB<>XSensitivityControl_IRTracc3DZeroPointVoltageh<>@SensitivityControl_InitialOffset<00><>8SensitivityControl_Intercept<00><>RSensitivityControl_InvalidCalibrationDate<00><>ZSensitivityControl_InvalidCalibrationInterval<00><>~SensitivityControl_InvalidZeroAverageOverTimeStartRelativeToEnd<0E>RSensitivityControl_InvalidZeroSensitivityF<>@SensitivityControl_LinearISOCodec<>TSensitivityControl_LinearSensitvityDetailsm<>PSensitivityControl_LinearizationExponent<00><>2SensitivityControl_Method<00><>:SensitivityControl_ModifyDate<00><>8SensitivityControl_NonLinear<00><>ZSensitivityControl_NonLinearSensitvityDetails<00><>BSensitivityControl_NonLinearStyle<00><>.SensitivityControl_None<00><>*SensitivityControl_Or<04>FSensitivityControl_OutputAtCapacity<08>TSensitivityControl_PreTestDiagnosticsSlope-<2D>VSensitivityControl_ProportionalToExcitation;<3B>HSensitivityControl_RadiusInterceptMMW<>4SensitivityControl_Recordsg<>TSensitivityControl_RemoveCalEntryChallengeo<>VSensitivityControl_RemoveCalRecordChallenge<00><>>SensitivityControl_RemoveLinear<00><>>SensitivityControl_RemoveOffset<00><>*SensitivityControl_S0<00><>*SensitivityControl_S1<00><>*Sensi
Squib<00><>$SquibDuration_NONE<00><> SquibFireMode_AC<00><>"SquibFireMode_CAP<00><>,SquibFireMode_CONSTANT<00><>$SquibFireMode_NONE<13>@SquibResistanceTable_ChannelName<19>DSquibResistanceTable_ChannelNumber"<22>0SquibResistanceTable_DAS(<28>4SquibResistanceTable_Delay-<2D>:SquibResistanceTable_Duration4<>6SquibResistanceTable_Failed><3E>FSquibResistanceTable_FireTestStatusF<>4SquibResistanceTable_GroupX<>FSquibResistanceTable_HighResistance_<>DSquibResistanceTable_LowResistancej<><SquibResistanceTable_NotTestedt<>>SquibResistanceTable_Resistance<00><>@SquibResistanceTable_SettingName<00><>6SquibResistanceTable_Status<00><>8SquibResistanceTable_Succeed<00><>SquibSetting<00><>4SquibSettingsTable_DelayMS<00><>:SquibSettingsTable_DurationMS<00><>6SquibSettingsTable_FireMode<00><>4SquibSettingsTable_ISOCode<00><>.SquibSettingsTable_Name	<09>Squibs<16>(StartDataProInstance&<26>StartShorted=<3D>Start_PauseN<>*StartingCheckChannelsf<>StartingRegion<>StartingRunTest<00><>
State<00><><StatusLineCheck_DigitalOutputs<00><>,StatusLineCheck_Failed<00><>&StatusLineCheck_Off<00><>$StatusLineCheck_On<00><>\StatusLineCheck_TableViewExpanderHeaderDetails<00><>HStatusLineCheck_WaitingForFlashWrite<00><>@StatusType_PREPARING_DATA_MEMORY#<23>>StatusType_PREPARING_FOR_ARMING:<3A><StatusType_UPDATING_DAS_CONFIGP<>BStatus_CreatingCalculatedChannelsl<> Status_Rebooting<00><>&StopDataProInstance<00><>StreamIn<00><>StreamOut<00><>StreamOut2<00><>StreamOutput<00><>*StreamingNotAvailable<00><>String1<00><>>StripBackSlashFromSerialNumbers<00><> SubControl_Added*<2A><SubControl_CheckoutModeWarning3<>$SubControl_Removedd<>FSummaryTestSetupsToBeDeleted_Buttono<><SupportedExcitationControl_10Vx<>:SupportedExcitationControl_2V~<7E>:SupportedExcitationControl_5V<00><>*SystemGrandMasterType<00><>8SystemSettingsContendMessage<00><>T0Corrected<0C> TDAS_Pro_LabRackF<>.TDDSensorImport_CultureU<>2TESTID_PREFIX_SUFFIX_Nonem<>DTESTID_PREFIX_SUFFIX_TestSetupNameu<><TESTID_PREFIX_SUFFIX_TimeStamp<00><>$TMNS_MinorPerMajor<00><>TMNS_MsgId<00><>TMNS_SubFrameId<00><>TMNS_TMATSPort<00><>,TOMDiagnostics_Current<00><>6TOMDiagnostics_CurrentLabel<00><>(TOMDiagnostics_Delay<00><>0TOMDiagnostics_DelayNoMS<00><>.TOMDiagnostics_Duration<00><>6TOMDiagnostics_DurationNoMS<01>"TOMDiagnostics_NA<0B>2TOMDiagnostics_OutputPeak<10>4TOMDiagnostics_OutputPeakV!<21>4TOMDiagnostics_TargetDelay2<>:TOMDiagnostics_TargetDurationG<>0TOMDiagnostics_Threshold_<>:TOMDiagnostics_ThresholdLabeln<>,TOMDiagnostics_Voltaget<>2TOMDiagnostics_VoltsLabel<00><>TSA_Embedded<00><>*TSA_Embedded_Angular1<00><>*TSA_Embedded_Angular2<00><>*TSA_Embedded_Angular3<00><>.TSA_Embedded_Atmosphere<00><>2TSA_Embedded_HighGLinear1<00><>2TSA_Embedded_HighGLinear2<00><>2TSA_Embedded_HighGLinear3<00><>*TSA_Embedded_Humidity<00><>0TSA_Embedded_LowGLinear1<01>0TSA_Embedded_LowGLinear2<11>0TSA_Embedded_LowGLinear3!<21>0TSA_Embedded_Temperature1<>"TSRAIRGO_DBNeeded><3E>0TSRAIRGo_ApplicationName<00><>TSRAIRGo_Arm<00><>(TSRAIRGo_CurrentTime<00><>"TSRAIRGo_Download<00><>(TSRAIRGo_EventLength<00><>&TSRAIRGo_ExportData<00><>(TSRAIRGo_GoDashboard<00><>TSRAIRGo_Help<04>"TSRAIRGo_Interval
<EFBFBD>*TSRAIRGo_Leveltrigger<19>>TSRAIRGo_MasterClockInputSource(<28>@TSRAIRGo_MasterClockOutputSourceC<>TSRAIRGo_Mixedy<>"TSRAIRGo_Multiple<00><>*TSRAIRGo_NumberEvents<00><>(TSRAIRGo_PostTrigger<00><>,TSRAIRGo_RecordingMode<00><>TSRAIRGo_SPS<00><>4TSRAIRGo_ScheduleStartTime<00><>"TSRAIRGo_Settings<00><>*TSRAIRGo_SystemStatus<00><> TSRAIRGo_Trigger<00>"TSRAIRGo_ViewData	<09>"TSRAIR_InvalidARS<14>$TSRAIR_InvalidLowGV<>0TSRAIR_ReconfigureNeeded<00><>TSR_AIR<00><>0TableFields_ColumnHeader<00><>,TableFields_ColumnName<00><>0TableFields_DisplayOrder<00><>&TableFields_Visible<08>"TableFields_Width<11>Table_NA<18>Temperature1<1D>Temperature2(<28>Temperature33<>Temperature4><3E>6TemperatureHumidityPressureI<>(TemperatureTable_DASj<>.TemperatureTable_Statuso<>8TemperatureTable_Temperaturew<>Test<00><>TestChannels<00><>@TestEngineerDetails_LastModified<00><>DTestEngineerDetails_LastModifiedBy<00><>0TestEngineerDetails_Name<00><>HTestEngineerDetails_TestEngineerName<00><>:TestExportFormat_CSV_Subtitle<00><>@TestExportFormat_Diadem_Subtitle<07>:TestExportFormat_ISO_Subtitle<13>>TestExportFormat_Somat_Subtitle&<26><TestExportFormat_TDAS_Subtitle4<>:TestExportFormat_TSV_SubtitleC<>@TestExportFormat_Toyota_SubtitleX<>&TestHistory_ArmTime]<5D>$TestHistory_Browseg<>>TestHistory_CouldNotExportEmptyo<>>TestHistory_CouldNotExportIssue<00><>.TestHistory_Description<00><>.TestHistory_Destructive<00><>$TestHistory_Export<00><> TestHistory_File<00><> TestHistory_Name<00><>LTestHistory_PleaseSelectFileToExportTo<00><>$TestHistory_TestId<01>*TestHistory_TestSetup
<EFBFBD>6TestIncompleteCheckChannels<16>*TestIncompleteRunTestI<>TTestModifications_ApplyShiftT0ModsTestOnlyv<>:TestObjectChannel_DisplayName<00><>:TestObjectPage_CantEditNonISO<00><>6TestObjectTemplate_Channels<00><>>TestObjectTemplate_ChannelsText<00><>bTestObjectTemplate_CouldNotCreateNONISOTESTOBJECT<0C>JTestObjectTemplate_DeleteConfirmation3<><TestObjectTemplate_Descriptionb<>2TestObjectTemplate_Groupso<>>TestObjectTemplate_LastModified<00><>BTestObjectTemplate_LastModifiedBy<00><>.TestObjectTemplate_Name<00><>2TestObjectTemplate_Parent<00><><TestObjectTemplate_SupportType<00><>0TestObjectTemplate_Zones<00><>>TestObject_ChannelWithoutSensor<00><><TestObject_ChannelsDescription<00><>.TestObject_DateModified<07>,TestObject_Description<11>JTestObject_FailedToGetUnitConversions<1E>hTestObject_GroupNotSupportedInCurrentISOSupportLevel\<5C>*TestObject_IsComplete<00><>*TestObject_ModifiedBy<00><>*TestObject_MoreErrors<00><>2TestObject_NewGroupPrefix<00><>:TestObject_NoHardwareAssigned<00><>*TestObject_NoTemplate<00><>DTestObject_NotEnoughAnalogChannels<12>PTestObject_NotEnoughDigitalInputChannelsU<>RTestObject_NotEnoughDigitalOutputChannels<00><>BTestObject_NotEnoughSquibChannels<00><>6TestObject_NumberOfChannels=<3D>,TestObject_NumberOfDASQ<>"TestObject_Parent`<60>FTestObject_SensorCalibrationMissingh<>0TestObject_SensorMissing<00><>.TestObject_SerialNumber<00><>,TestObject_SupportType<00><>&TestObject_Template<00><>TestPage_Title<00><>6TestSetupAutoArmDiagDelayMS<07>2TestSetupAutoArmDiagLevel'<27>:TestSetupChangedByAnotherUserB<>LTestSetupChangedByAnotherUserCannotRun<00><> TestSetupDeleted<07><TestSetupDuplicateGraphWarningv<>4TestSetupEmptyGraphWarning<00><>FTestSetupError_InvalidZeroStartTime<00><>TestSetupInUse<0F>TestSetupInUse2<00><>.TestSetupInUseChallenge<00><>@TestSetupLevelTriggerGreaterThan<00><>:TestSetupLevelTriggerLessThan<00><>DTestSetupLevelTriggerOutsideWindow<00><>:TestSetupNoRecordingTimeError<00><>"TestSetupNotFound=<3D><TestSetupNotSavedReportWarningS<>2TestSetupSelection_TestID<00><>0TestSetupSensors_CalDate<00><>6TestSetupSensors_CalDueDate<00><>2TestSetupSensors_Capacity<00><>8TestSetupSensors_ChannelName<00><>0TestSetupSensors_DODelay<00><>6TestSetupSensors_DODuration<00><>6TestSetupSensors_Excitation<00><>.TestSetupSensors_Filter<00><>
<EFBFBD>@TestSetupSensors_InWarningPeriod<14>,TestSetupSensors_JCODE'<27>*TestSetupSensors_None.<2E>4TestSetupSensors_OutOfDate4<>2TestSetupSensors_PolarityA<>2TestSetupSensors_PositionK<>,TestSetupSensors_RangeU<>0TestSetupSensors_SQDelayb<>6TestSetupSensors_SQDurationo<>@TestSetupSensors_SQLimitDuration<>.TestSetupSensors_SQMode<00><>8TestSetupSensors_Sensitivity<00><>2TestSetupSensors_SensorId<00><>6TestSetupSensors_SensorName<00><>:TestSetupSensors_SerialNumber<00><>>TestSetupSensors_TestObjectName<00><>,TestSetupSensors_Units<00><>6TestSetupSensors_ZeroMethod<00><>0TestSetupValidationError<00><>JTestSetup_AllowAdvancedRecordingModes<0E>BTestSetup_AllowCalculatedChannels.<2E>DTestSetup_AllowEIDSensorOutOfPlaceI<>:TestSetup_AllowQuickTestSetup<00><>FTestSetup_AllowTSRAIRRecordingModes<00><>:TestSetup_AllowTriggerSetupUI<00><>:TestSetup_AutoAddArmChecklist<00><><TestSetup_AvailableSampleRates<00><>$TestSetup_Channels<01>NTestSetup_CombineDualSensitivityExports<0B>4TestSetup_CommonStatusLineI<>>TestSetup_ControlSurfaceCOMPort]<5D><TestSetup_DefaultRecordingModes<>:TestSetup_DefaultTestIDPrefix<00><>:TestSetup_DefaultTestIDSuffix<00><>4TestSetup_DeriveROIFromAll<00><>*TestSetup_Description<00><>RTestSetup_DontAllowOutOfCalSensorsDefault<00><>,TestSetup_DownloadMode
<0A>JTestSetup_Edit_AddHardware_Page_Title<1C>&TestSetup_ExportADC*<2A>6TestSetup_ExportActualRange/<2F>0TestSetup_ExportFilteredM<>4TestSetup_ExportFilteredEUW<>,TestSetup_ExportFormatd<>$TestSetup_ExportMVl<>2TestSetup_ExportNoOptionsp<>4TestSetup_ExportUnfiltered<00><>8TestSetup_ExportUnfilteredEU<00><>TestSetup_G5<00><> TestSetup_Graphs<00><>(TestSetup_ISOSupport<00><>8TestSetup_ImportFromTDAS_INI<00><>JTestSetup_IncludeGroupNameInISOExport<00><>"TestSetup_IsReadyXTestSetup_IsoChannelSensorCompatibilityLevel&dTestSetup_KeepMultipleEventsAndROIWithinTestFolderN,TestSetup_LastModified<00>0TestSetup_LastModifiedBy<00> TestSetup_MAXAAF<00>DTestSetup_MaxParallelTDASDownloads<00>TestSetup_Name<00>@TestSetup_RTCSchedule_Disclaimer<00>FTestSetup_RTCSchedule_EventDuration>TestSetup_RTCSchedule_StartTime6HTestSetup_RTCSchedule_UTCCurrentTimeV.TestSetup_RecordingModek$TestSetup_SLICEAAF{4TestSetup_SamplesPerPacket<00>"TestSetup_TDASAAF<00>.TestSetup
:TestTemplate_HardwareNotFound<>TestTemplate_InsufficientMemorywTTestTemplate_InsufficientPostTriggerLength<00>TTestTemplate_InsufficientTestTimeForSquibs<00>HTestTemplate_InvalidAccelerationXHIC;HTestTemplate_InvalidAccelerationYHIC`HTestTemplate_InvalidAccelerationZHIC<00>>TestTemplate_InvalidChannelsHIC<00>@TestTemplate_InvalidDynamicGroup<00>2TestTemplate_InvalidGroup

>TestTemplate_InvalidSensitivity:
8TestTemplate_InvalidUnitsHICm
.TestTemplate_MoreErrors<00>
0TestTemplate_MultipleDAS<00>
JTestTemplate_MultipleRecordingPeriods<00>
@TestTemplate_MultipleSampleRates:TestTemplate_NoHardwareInTest08TestTemplate_NoSensorsInTestWPTestTemplate_NonLinearInAlwaysLinearTest<00>:TestTemplate_ROIHasNoChannels<00>>TestTemplate_ROISuffixNotUnique<00>*TestTemplate_Recorder<00>:TestTemplate_RecorderPlusUART<00>@TestTemplate_RecordingPeriodText(TestTemplate_SPSText2LTestTemplate_SQUIBFIREDURATIONEXCEEDEDMNTestTemplate_SQUIBFIREDURATIONMINNOTHITxLTestTemplate_SQUIBMAXFIREDELAYEXCEEDED<00>LTestTemplate_StreamInDASWithNoSettings<00>fTestTemplate_StreamOutChannelWithNoHardwareAssigned=HTestTemplate_StreamOutChannelsNoMode~VTestTemplate_StreamOutModeDASWithNoSettings<00>HTestTemplate_StreamOutModeNoChannelsJNTestTemplate_StreamOutModesNeedEnabling<00>^TestTemplate_StreamOutUARTProfileNoUARTSettings<00>ZTestTemplate_TriggerDelayAndDurationNotTestedp>TestTemplate_UARTChannelsNoMode<00>BTestTemplate_UARTChannelsNoStream">TestTemplate_UARTModeNoChannelsz4TestTemplate_UARTModeNoDAS<00>DTestTemplate_UARTModesNeedEnablingDTestTemplate_UDPAddressesNotUniqueIPTestTemplate_UnsupportedClockSyncProfile<00>VTestTemplate_UnsupportedClockSyncProfileLTS<00>JTestTemplate_UnsupportedRecordingModegPTestTemplate_UnsupportedStreamingProfile<00>DTestTestTemplate_InvalidUploadPath<00>"TestView_AllOrROI<00>*TestView_CustomerNameTestView_Date(TestView_DateCreated(TestView_Description(TestView_Id5 TestView_LabName>2TestView_NumberOfChannelsJ$TestView_ROISuffix^2TestView_TestEngineerNamej"TestView_TestNameyTestView_Time<00>Test_History<00>ThreeD_IRTracc<00>ThreeD_RotPot1<00>ThreeD_RotPot2<00>&TiltSensorTable_DAS<00><TiltSensorTable_SensorDegreesX<00><TiltSensorTable_SensorDegreesY<00><TiltSensorTable_SensorDegreesZ<00>,TiltSensorTable_Status<00>0TiltSensorTable_SystemID<00><TiltSensorTable_SystemLocation.TimedWaitControl_Cancel4ToBeDeleteTestSetupsReport
Toolsi
TotalpTriggerShortedw2TriggerShortedFullMessage<00>UART<00>$UDP_AddressWarning<00>UDP_Unavailablef&UnableToDeleteGroup<00>(UnableToSetClockSync<00>UnassignedY(UniPolar_Descriptione(UniPolar_DisplayName<00>Units_EU<00>Units_Required<00>UnknownDASType<00>UnknownModule*UpdateTestSetups_Done$UpdatingAttributes,"UpdatingTestSetupA,UploadDataBrowseFolderWDUploadData_AreYouSureYouWantToSkip_(UploadData_Cancelled<00>UploadData_Done<00>"UploadData_Failed<00>*UploadData_FileColumn<00>6UploadData_FileType_AllData<00>HUploadData_FileType_DataPROTestSetup<00>4UploadData_FileType_Export	.UploadData_FileType_ISF.UploadData_FileType_JCL.UploadData_FileType_LOG0UploadData_FileType_Logs).UploadData_FileType_RDF/4UploadData_FileType_RDFAll44UploadData_FileType_RDFROI?6UploadData_FileType_ROIDataJ6UploadData_FileType_Reports[:UploadData_FileType_TestSetupd,UploadData_Files_Existp(UploadData_MoreFiles<00>"UploadData_Status<00>0UploadData_Status_Failed<UploadData_Status_FileNotFound8UploadData_Status_NotStarted$2UploadData_Status_Skipped)2UploadData_Status_Success2RUploadData_TableViewExpanderHeaderDetails;2UploadData_UploadLocationD(UploadData_uploadingU(Upload_ExistingFiles`&Upload_UserCanceled<00>&UsageReport_DASType<00>*UsageReport_GroupType<00>,UsageReport_SensorType<00>2UsageReport_TestSetupType<00>FUseDropDownForTestObjectAndPosition<00>2UseDynamicGroupsForImport"bUseLegacyTDASContorlTOMSoftwareFilterClassSettingKZUseLegacyTDASControlSoftwareFilterAdjustement<00>&UserCannotBeDeleted<00>UserChannelName<00>UserCode<00>4UserDelete_OperationDenied<00>4UserPartNumber_Description,UserPartNumber_Display&4UserPartNumber_DisplayName8UserTagsJUserValue1YUserValue2gUserValue3uUser_DatabaseId<00> User_DisplayName<00>"User_LastModified<00>&User_LastModifiedBy<00>User_Role<00>User_UserName<00>
Users<00>ValueEU<00>ValueMV<00>LViewGraphViewControl_ErrorLoadingGraph<00>NViewGraphViewControl_ErrorLoadingGraphs<00>LViewGraphViewControl_NoChannelsInGraph.View_CalculatedD<View_DataNotGeneratedByDataPROR"View_DataTooLargeu&View_NoNameProvided<00>$VoltageMeasurement<00>$VoltageStatus_Good<00>$VoltageStatus_High<00>"VoltageStatus_Low<00>(VoltageStatus_Medium<00>$VoltageStatus_None<00>&WaitingForUserInput<00>2WakeUpManagement_Duration DWakeUpManagement_MagnetWakeTimeout DWakeUpManagement_MotionWakeTimeout5 :WakeUpManagement_SessionStartP :WarnWhenDeletingGroupChannels_ Warning<00> *WarningInvalidDASType<00> $WarningMsgBoxTitle<00> XWarning_AngularRateLevelTriggerOnButNoAxisOn<00> @Warning_EditTestIgnoreTriggerTOM?!*Warning_EuAtMvUseNone<00>!2Warning_FailedEventInsert}"FWarning_FailedToRetrieveCanChannels<00>"LWarning_HighgLevelTriggerOnButNoAxisOn<00>"BWarning_HumidityBelowIsAboveAbove/#RWarning_InitialOffsetAppearsMultipleTimes<00>#XWarning_InitialOffsetEUAtMVOnlyValidOnLinear<00>#DWarning_InitialOffsetNoFormTypeSet<00>#<Warning_InspectBeforeUseSensor&$4Warning_InvalidAngularRate<00>$<Warning_InvalidHighgLinearRate<00>$:Warning_InvalidLowgLinearRate<00>$VWarning_InvalidRecordingModeForClockTrigger%<Warning_InvalidSessionDurationp%>Warning_InvalidSessionStartTime<00>%\Warning_InvalidTemperatureHumidityPressureRate<00>%HWarning_LevelTriggerOnButNoTriggerOn&JWarning_LowgLevelTriggerOnButNoAxisOnG&@Warning_NotAllChannelsDownloaded<00>&BWarning_PressureBelowIsAboveAboveA'BWarning_StreamAndRecordSampleRate<00>'HWarning_TemperatureBelowIsAboveAbove<00>'LWarning_UnsupportedEventLineCompletionC(4Warning_VoltageInsertionOn<00>(.Warning_YubaBatteryDead).Warning_YubaBatteryLifee) Windows11Warning<00>)6ZeroMethods_AverageOverTime<00>* ZeroMethods_None<00>*LZeroMethods_UsePreEventDiagnosticsZero<00>*_24VPower<00>*Use AC couplingATDAggregate statusDevicesDistributorStatusStatusAccelerationActiveActual Range high limit (%)Actual Range low limit (%)Add Calculated ChannelCalculationCalculation Input ChannelChannelDescriptionISO CodeInput channelsChannel NameAdd new device<01>Changing tabs will result in loss of information that could not be saved.  Press OK to continue to new tab, or cancel to remain on current tab.and an additional ({0}) errorsAdd userEdit User: {0}System settingsCancelNoYesSystem settingsExportExport SettingsImportImport SettingsSystem settingsAdvanced settings	
Restore dbSaveSensor settingsSoftware filtersTSR AIR settingsTablesTest history settings
Test settingsUI settingsTest setup settingsRestore settingsSaveDoneInfoPermissionsSave and add another userSave
VisibilityAddDeleteEdit9IR-TRACC and rotational plots are required to be selectedAll channels have completed level trigger checks.  Press 'Proceed' to continue to next step, or 'Cancel' to remain in realtime.7Allow channel deletion from a fixed group in Test SetupqDiagnostics mode is enabled, please make sure the Diagnostics mode is cleared from any hardware prior to shipping5Allow modification of Test Setup Name and Description5Allow push/pull of Group modifications to Test SetupsAllow Quick Build(Apply sensor data when assigning channelAllowed noise (% FS)3The following channels are already level triggered:Always show TSR AIR settingsAnalog
Analog formatAngular accelerationAngular acceleration & rate<01>Database is from a more recent version and the application needs to be updated to use the database.  Database Version {0}, Application Database Version {1}rDatabase needs to be migrated before application can start.  Please upgrade the database: Required {0}, Found {1}.APlease place all TOMs in Arm Mode.  Press cancel to bypass check.]Please place all TOMs in Safe Mode and press Retry, or press Proceed to continue in Arm Mode.applicationSettingsDataPROfDataPRO has experienced an issue.  The issue has been recorded.  DataPRO will now shutdown for safety.:Apply hardware channel assignment when discovering sensorsApply setting to all usersApprove sensor for use$Are you sure you want to delete {0}?BatteryFailed or missing batteryBattery low
Clock syncClock sync checkDetailsEvent linesEvent lines checkInput power	Input lowInterval trigger
Level triggerLevel trigger checkRunning checks	Sensor IdSensor Id check
Squib failureSquib resistance checkTemperatureTemperature checkLocation {0} : TiltTilt sensor checkDAS voltage checkBattery high	CancelledFailed, checklist not runFailedFailed.  Failures - Failed (already triggered)Waiting for user selection
Input highN/AInput clock(s) not syncedPreparing checklist Failed, sensor id not on channel4, or press Proceed to bypass squib resistance check.1Please place all TOMs in Arm Mode and press Retry#Please place all TOMs in Safe Mode.PassedInput clock(s) syncedTilt failed"Failed, tilt sensor data not found8An Unused Axis was not selected when {0} was configured.+Waiting for previous operations to completeDisarmDownload and RearmSoftware StartSoftware TriggerStop MonitoringArmingArm failed!1Arm Prepare complete. Waiting for user selection.ArmedArmedArmingAuto armingxUnits can now be disconnected and the ON signal removed.  Units will automatically arm{0} when the ON signal is applied.Awake, waiting for triggerBattery low voltageBattery (V)Battery Voltage Status	Cancelled	Channels:Checking for dataChecking for data
Processing...Preparing data memory$Could not apply configuration to {0}Configuring device(s)Streaming - activeDAS<01>Default hardware filter rate for {0} is out of range.  Press OK to continue and use the max hardware rate(s) or Cancel to cancel$Monitoring Stopped, Ok to DisconnectZClick Retry after re-connecting, Proceed to continue disarming as-is, or Cancel to go backDisarmedDoneDone recordingEvent NumberEvent number too largeEvent uncompletedPreparing Hardware`Click Retry after re-connecting, Proceed to continue exiting streams as-is, or Cancel to go backFailed
Failed to armFailed to disarmFailed startFailed to clear flash: {0}Failed trigger7A fault was detected - stopping the test is recommendedFaults
Faults: clearFilling buffer
Erasing flashGetting event infoWaitingZNot all units have started - start remaining units or stop the test.  Remaining test time:OTriggers do not match - stopping the test is recommended.  Remaining test time:	Input (V)Input Voltage StatusInterval length in minutes:Invalid arm modeInvalid event length%Invalid pre-trigger samples requestedInvalid sample rateInvalid slice countLevel Trigger ChannelsDone Level-TriggedLevel Triggers:Memory full[Use Retry after re-connecting, Proceed to continue monitoring, or Cancel to stop monitoring(The following hardware is not connected:!Please place all TOMs in Arm ModeArm PrepareWaiting for DAS to re-connectNo data was collected7No data was collected - Note: No triggers were detected3No data was collected - Note: Triggers do not match5Not Armed, nor Auto-armed (restart will not arm unit)4Not Armed, nor Streaming (restart will not arm unit)NoneEThe following DAS is not included, are you sure you want to continue?NOT CONNECTED!OK<01>Diagnostics is out of date for one or more of the units in the test.  Data collection with uncalibrated units is not allowed. Please re-run the diagnostics step.PassedPerforming diagnosticsCancelContinue<01>Post-test diagnostics has been selected, but will not be run because no channels that remain in the test apply. Are you sure you want to continue?Post test processingPost-Trigger Seconds:Pre-Trigger Seconds:Preparing for armPreparing for armingPreparing for diagnosticsReady for download/Ready for download - Note: A fault was detected4Ready for download - Note: No triggers were detected0Ready for download - Note: Triggers do not match	Re-arming  and begin recording immediately	RecordingRecording Mode:Samples Per Seconds:IWARNING!  Squib resistances still present, squibs are ARMED AND CAN FIRE.<01>WARNING!  Squib resistances still present, squibs are ARMED AND CAN FIRE.
WARNING!  All TOMs are not in the SAFE position.
Click Retry to check again or Proceed to continue<01>WARNING!  Squib resistances still present, squibs are ARMED AND CAN FIRE.
WARNING!  All TOMs are not in the SAFE position.
Click Retry to check again.Safe switch unpluggedSchedule start time (UTC):Updating DAS configurationShorted start and triggerShorted start record inputShorted trigger inputSquib resistance faultStart: waiting)Are you sure you want to start recording?Start: mixedStartedStatusStreaming Address<01>Units can now be disconnected and the ON signal removed.  Units will automatically begin streaming when the ON signal is applied.{0}{0}Clicking 'Stop Monitoring' prior to removing the ON signal will allow the units to be controlled when they re-connect, without having to restart DataPRO.DetailsTest Length In Seconds:GroupTest sample rateTime left in armTrigger before StartSTrigger before start recieved with TDAS racks in the test.  Units will be disarmed.Trigger: waiting2Are you sure you want to apply a software trigger?Trigger: mixed	TriggeredCurrent time (UTC):Unimplemented arm modeUpdating DAS configuration'Auto armed - waiting for DAS to restartWriting flash memoryWaiting for intervalWaiting for motionWaiting for next interval*Waiting for post-test processing to finishWaiting for schedule startWaiting for start$Waiting for event to start recording.Waiting for DAS to restart and begin streaming/Waiting for all TOMs to be placed into Arm ModeRecording, waiting for triggerWaiting for trigger checkWake upWake up: waitingWake up: mixed
Writing flashXNumber of events supported by TSR AIR is {0}. It's automatically changed from {1} to {0})Remaining time until scheduled recording:Armed (high)Armed (low)Armed (med)Assigned
AttachDBs.bat
Auto-armed)Auto-connect to hardware on hardware stepDetecting channel types	ConnectedFailed2SLICE Base+ serial numbers should start with 'BA5'Added+Armed (AutoDetect will not run while armed)	Cancelled	Connected
ConnectingDoneRUnits have been connected to but not added/updated. Are you sure you want to exit?FailedReadyInvalid IP address-No channels on DAS, DAS will not be processedCould not connectNo replyPing OKPingingQuerying configurationFailedQuerying configurationReadyBridge
IEPE (module)TDAS PRO DIMTDAS PRO SIMTDAS PRO TOMUpdated
channel(s)
Channel(s)ConnectConnection typeDAS typeAuto-discovered DAS
IP addressIP address requiredIncluded8SLICE MICRO Base+ serial numbers should start with 'BA0'7SLICE NANO Base+ serial numbers should start with 'BA5'NetworkNo channels foundNo units foundPosition
Programmable 7SLICE PRO Lab DIM serial number should start with 'SLD'SLICE network-attached DAS=SLICE PRO Distributor serial numbers should start with 'SPDB'SLICE Ethernet Control ModuleSLICE Mini Distributor,Serial number belongs to a SLICE PRO LAB DIM,Serial number belongs to a SLICE PRO LAB TOM7SLICE PRO Lab SIM serial number should start with 'SLS'7SLICE PRO Lab TOM serial number should start with 'SLT'
Serial number"Serial number belongs to a TDAS G5&Serial number belongs to a SLICE MICRO,Serial number belongs to a SLICE PRO Lab SIM<Serial number belongs to a SLICE PRO Lab ethernet controller,Serial number belongs to a TDAS PRO Lab rackSerial number required8SLICE Lab Ethernet serial number should start with 'SLE'Status7TDAS PRO Lab rack serial numbers should start with 'LR'TDAS network-attached DASTypeUSBUSB-connected DAS analog{0} analog channelsAuto-detect DAS CAN Digital input2SLICE PRO DIM serial numbers should start with SPDDIRDKR digital outputEmbedded SensorsG5
G5 (in-dummy)
G5 (iPort)-TDAS G5 serial numbers should start with '5M'G5 (VDS)IEPEBridge/IEPE switchable2SLICE MICRO serial numbers should start with 'BA0'PingPowerPRO Battery/PowerPRO serial number should start with 'PPRO'{0} reprogrammable channels4SLICE PRO SIM serial numbers should start with 'SPS'SLICE Base+SLICE MICRO Base+SLICE NANO Base+	SLICE PRO
SLICE PRO DIM
SLICE PRO SIM
SLICE PRO TOM1SLICE 6 AIR serial number should start with 'S6A'?SLICE 6 lite distributor serial numbers should start with S6DB3-SLICE 6 serial number should start with 'SL6'1SLICE NANO serial numbers should start with 'BA5'SLICESLICE Distributor 4SLICE MICRO
SLICE NANO(Serial number belongs to a SLICE PRO DIM#Serial number belongs to SLICE NANO#Serial number belongs to a SLICE G5(Serial number belongs to a SLICE PRO SIM(Serial number belongs to a TDAS PRO rack;SLICE 6 distributor serial numbers should start with 'S6DB'SLICE Distributor7SLICE Distributor serial numbers should start with 'SD'ASLICE PRO Ethernet Control serial numbers should start with 'SPE'SLICE G5/SLICE G5 serial numbers should start with 'SG5'SLICE Mini Distributor=SLICE Mini Distributor serial numbers should start with 'SPM' squib
 stream input stream outputD{0} analog channels, {1} squib channels, {2} digital output channels3TDAS PRO rack serial numbers should start with 'DR'
TDAS PRO Rack4SLICE PRO TOM serial numbers should start with 'SPT'TSR-AIR
TSR-EthC-RevB UART8Automatically start DAS discovery when doing Quick BuildDescription
IP addressNameScan
Basic infoRefresh-Automatically Run Test when doing Quick Build digital inputAvailable replacement DASOut of date cached itemsChannels"Test Setup to be used for downloadSensor detailsCustomer detailsISO export detailsLab detailsTest engineer detailsDescriptionTest id.Files in the {0} folder cannot be overwritten.Customer cost unitCustomer record
Customer nameCustomer order numberCustomer project ref. numberCustomer test ref. number`Destructive/impact test (will set First Use Dates (if needed) and increment Sensor Usage counts)#A valid Test Setup file is requiredData recordersISO export detailsInterval length in minutes:Time interval triggers
Contact emailContact faxContact name
Contact phoneLab detailsLab test ref numberLab nameLevel-Trigger Setting:Level triggersKis marked as required but the sensor assigned could not be found - sensor: 4is marked as required but without a sensor assigned.<01>Do you want to update the sensors, calibrations, and hardware in this test?  Yes will update, No will proceed without updating, and Cancel will remain on this page.<01>There are out of date items in test setup.  Press OK to continue test setup without updating.  Cancel will remain on this page.  Because some sensors in the test have been deleted the test setup has to be updated in edit test setup.$Data recorders with calibrations due+Files in the {0} folder may be overwritten.CancelContinuePost-Trigger Seconds:Pre-Trigger Seconds:Recording Mode:?Report {0} is already in use.  Please close Excel and press OK.<Press OK for file{0}{1}{2}to be overwritten; Cancel to skip.Samples Per Second:Schedule start time (UTC):Select group firstSelect sensor firstTest engineer recordTest engineer emailTest engineer faxTest engineer nameTest engineer phoneTest Length In Seconds:Filter classNamePositionTest ObjectGroupsScheduled triggersCurrent time (UTC):Battery voltage<01>Channels which have no DAS, sensor, code or channel name set will be removed.  Press OK to continue on without making any changes, or Cancel to remain on pageSensor resistance in Ω.Bridge resistanceIEPE module
Digital inputQuarter bridgeSquibHalf bridgeDigital outputFull bridgeFull bridgeHalf bridge$Half bridge (+Signal) [TDAS G5 Only]IEPEQuarter bridgeGWhen checked a sensor is broken and should not used for data collectionBrokenBulk sensor editCapacityManual
Range High	Range LowRange MediumCosine
DerivativeDouble integralHICIntegral	ResultantSine3D IR-TRACC (upper thorax)3D IR-TRACC (abdomen)3D IR-TRACC (lower thorax)CAN&non distinct test object for group {0}Cal excitationCal measurement unitSensitivityCal userAverage3D IR-TRACC (upper thorax)3D IR-TRACC (abdomen)3D IR-TRACC (lower thorax)3D IR-TRACC (abdomen)3D IR-TRACC (lower thorax)3D IR-TRACC (thorax)VCalculated channel '{0}' has no input channels or refers to channels no longer in test	ResultantSum	Check DASShow DASTest object listTest Setup listDAS listCancelZThe selected test data is not from a compatible version of DataPRO and cannot be exported.I.  Press OK to take control over test setup, or Cancel to remain on page.Change<01>The UI language has been changed to English, but the change won't display until DataPRO is closed and reopened.

Restart DataPRO?N/ADI-DO-CH-SQ-Channels summaryChannel type{0} Channel(s) in {1}ChannelSensorStatusTypeAuto discoveryPassed (Low Battery)Verifying DAS Arm State,Waiting for ARM/SAFE mode status from TOM(s)Checking clock sourcesChecking DASChecking Data RecordersChecking UART settings	Connected
ConnectingConnecting to hardware$Connecting to hardware {0:00}:{1:00}DConnected DAS Passed (disconnected DAS will not be included in test)FailedWaitingInvalid configurationGThe following unit(s) are currently unable to read their flash memory: No channels in test#Configuration files required in {0}No data to downloadNot includedPassedReading voltagesRebootedSetting clock sourcesApplying UART settingsTest cancelledCal date overdueCancelChannel count mismatch
ConnectionContinue<01>A device attached to the system has event data that no longer matches it's configuration.  Please check the log for more details.Communication device/Warning, failed to update configuration on {0}. Device firmware version mismatch6The following unit has an unexpected firmware version:!{0} has {1}, but {2} was expected0Update the firmware version(s) in the database? 6The following units have unexpected firmware versions:5The following units have unexpected maximum memories:4The following unit has an unexpected maximum memory:!{0} has {1}, but {2} was expected-Update the maximum memory(s) in the database?iError: {0} does not support the requested streaming mode.  Please check the firmware version on the unit.)The following unit(s) have a low battery:Missing modules: {0}5No data recorders included in the test are available.	No memoryDo you want to update the sensors, calibrations, and hardware in this test?  Yes will update, No will proceed without updating.=Rack {0} configuration has changed since test was configured.<01>The Clock Source and/or UART settings have changed on the following unit(s). Settings will be updated and the unit(s) will be rebooted. Please wait a moment and check hardware again.\Warning, removal of leap seconds was requested, but the firmware on {0} does not support it.RError: Streaming is not available on {0}.  Please contact DTS to add this feature.DetailsDAS first use date differsDAS available memory mismatch9Error!  The following unit(s) are currently in realtime: Not used in test<01>The following unit(s) have not been added into DataPRO yet.  Please use the data recorders tab to detect and add the hardware to the system.LWarning: {0} does not support a list of UDP channels; only {1} will be used.The following unit(s) have been discovered but have been detected as of a different type or in a different docking station/rackXControls whether sensor offset is measured during diagnostics and compared to tolerancesCheck offsetChecking out hardwareClick to ArmClick to DisarmClock sync profileDASStatusSConfiguration was missing on {0}.  Apply configuration from test to affected units?VCan only edit groups with the same ISO Support level as the currently configured level<01>The following sensors are in the database without the corresponding EID found on the DAS:{0}{1}{2}{3}{4}Ignore conflict(s) and continue?conflicts with	Connected Copy & TrimROI period end (sec)New Test IdROI period start (sec)	ExportingCopy & Trim failedCopy & Trim finished<Modify fields, if needed, then click on 'Copy & Trim' buttonTest Id already existsTest Id is required
Coupling modecreate DataPROInstance -screate DataPROInstanceCreate voltage input channelsCurrent test<01>The current viewing user does not have support for Active RAM recording modes turned on, but the selected test has an Active RAM recording mode selected.
Current view:DateDefault filter class	DirectionFine location 1Fine location 2Fine location 3
Main locationPhysical dimensionRemarksNameTypeCancelISOCode is not uniqueSave4Warning, the channel {0} has an expired field - {1}.[Are you sure you want to delete the custom channel(s)?  (May take a few minutes to delete).Customer
Last modifiedLast modified byRecord nameEmailEngineerPhoneiWarning, the following das have sync with a clock source, but the clock source is in local time, not UTC.4DAS {0} doesn't support streaming filter profile {1}&The DAS export file must be specified.CNo DAS have been selected.  Please select DAS to include in export.Cal dateCal due dateChannelsFirmwareFirst Use DateHardwareTypeIncludedMax sample rateSample rate
Serial numberTest sample rateDAS info]The firmware on {0} doesn't support streaming filter profile {1}.  Firmware upgrade required.SDevice {0} reported fault {1}.  Contact DTS technical support for more information.
Serial number{0} channelsNo channels assigned	1 channelDAS summaryData RecordersRep
DHCP faultFPGA not detectedFRAM not detectedFRAM wakup faultFuel guage fault!Ethernet switch chip not detectedLow g accel chip faultMagnet sensor not detectedNAND not detectedNetwork configuration faultPort 1 droppedPort 1 PG faultPort 2 droppedPort 2 PG faultPort 3 droppedPort 3 PG faultPort 4 droppedPort 4 PG faultHub power droppedRTC not detected
RTOS fault(None)Super cap faultTemperature faultRange overhead factor (%)~Device {0} has changed ip address since it was originally discovered.  Please use hardware discovery to update the ip address.{0} reported fault(s): {1}Checking for dataPreparing HardwareFailedWaiting for user selection/Low power mode (run diagnostics to resume test)PassedPerforming diagnosticsPreparing for diagnosticsSetting configuration failedUpdating DAS configuration\To continue troubleshooting the failure for device(s) 

{0}

Please proceed to realtime.Error - {0} reported {1}Diagnostics (high)Diagnostics (low)Diagnostics (med)Diagnostics mode?Diagnostics timed out, try increasing diagnostics timeout value;Diagnostics timed out due to communication drop with units:Source VoltageApply scale factor mVCal signal checkClock sync checkFactory excitationFinal offsetMeasure bridge mVMeasure excitationMeasure final internal offsetMeasure internal offset
Measure noiseMeasure offset
Measure shunt
Query modules
Remove offsetShunt checkTest channel readTest channel runActual DelayActual DurationActual range (EU)AutoZero % DeviationBattery (V)Failed
{0} (High)  {0} (Low)Show DASTest SetupsDAS DBCancel<01>Single-channel diagnostic testing is unavailable for this channel. Please choose to Run all or Run (DAS) to obtain results insteadChannel#ChannelsCheck Hardware StatusClocksContinueDASCancelContinueDescriptionDesired Delay (ms)Desired Duration (ms)Desired range (EU)Actual value (Digital Input)Expected value (Digital Input)
Table view
ExcitationExpected initial stateFail (Battery)Fail (Battery)Fail (Battery)Failed (Input High)Failed (Input Invalid)Fail (Input Low)FailedJOne or more sensors failed diagnostics, are you sure you want to continue?HighHigh (V)	High (mV)WaitingInitial offset
Initial state	Input (V)
{0} (Battery)
{0} (High){0} LowLowLow (V)Low (mV)Module
No batteryN/ANoise (% fs)(Not synced)Initial OffsetPassedQuick Checkout	Run checkRunQuery selectedRealtime stressResultsDiagnostics timeout SLICE (sec)
Sensor s/nSensor Voltagetrigger shortedAllFailedPassedShuntBypass check
Check TriggerBypass checkCancel trigger check
Check triggerSoftware trigger(Synced)Diagnostics timeout TDAS (sec)GroupGroups	Tree viewLThere is data which has not been downloaded.  Continue with test, or Cancel?aDAS have disconnected from the system, aborting the test is recommended. Please check connectionsBypass checkCancel wakeup checkSoftware triggerZSome events will not include all hardware - The number of events differs on some hardware.Transition High-to-LowTransition Low-to-HighContact Closure Normally ClosedContact Closure Normally Open Five Volt High-to-Low Transition Five Volt Low-to-High TransitionNot set
Delay (ms)
Duration (ms)NameOutput mode
digital input
Digital inputContact Closure Normally ClosedContact Closure Normally OpenTransition High-to-LowTransition Low-to-HighContact Closure Normally ClosedContact Closure Normally OpenTransition High to LowTransition Low to Highdigital output!Contact closure - normally closedContact closure - normally open5V high to low  transition5V low to high transitionDigital outputContact Closure Normally ClosedContact Closure Normally Open5 Volt High to Low Transition5 Volt Low to High TransitionDigital Output SettingsStateDigital Input SettingsNONE Are you sure you want to disarm?Display units required/Encountered problem doing data download for {0}0Encountered problem doing query download for {0}4Cannot get calibration results on a null device listDCannot get event calibration results on device list with {0} entries=Encountered problem getting event calibration results for {0}8When checked tests should not be able to use this sensor
Do not use5Cannot query download on device list with {0} entries+Cannot query download on a null device list&Do you want to save modified channels?Done(One or more channels were not downloaded(Encountered problem downloading all dataBrowseFolderRunIn parallelSequentiallyParallel by DAS typeROI period end (sec)NROI end is after end of data (test requested {0} seconds of post-trigger data).Region of interest must be more than 0 secondsROI period is larger than dataROI period start (sec)RROI start is before start of data (test requested {0} seconds of pre-trigger data)$ROI period start is after period end<ROI is larger than data (test requested {0} seconds of data)(Encountered problem downloading ROI dataQWarning:  There was an issue while downloading data, data files may be incompleteDownload cancelledPartial download cancelledDownloadingDownloading UARTDownload failed<01>Warning: The specified download path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the download directory name must be less than 248 characters. Please correct the issue and try again.Download finishedbThe following hardware was not armed with this software and will not be included in this download:/Warning: The following DAS do not contain data:JUse Retry after re-connecting, Proceed to download partial data, or Cancel(The following hardware is not connected:4No region of interest has been selected for downloadIDAS: {0} has no samples in its event data.  there is nothing to download."Overwrite pre-existing data files?]Error: the following files with test data already exist in {0} {1} and cannot be overwritten.DWarning: the following files with test data already exist in {0} {1}<01>Select 'OK' to overwrite the old files with new data.{0}you can preserve the existing test files by pressing 'cancel', changing the 'path' in 'folder', and downloading again.;Use Proceed to download data from remaining DAS, or Cancel.:Download failed. The ROI is outside of the available data.RecoveryCapturing DAS attributesDownload cancelledPartial download cancelledDownload failedDownload finishedFinishing downloadGetting event dataNo data to downloadNo UART data to downloadPartial download finishedPreparing for downloadQuerying configuration:Download failed. The ROI is outside of the available data.DetailsMultiple Events DetailsROI DetailsDownloadingAngular accelerationAngular acceleration XAngular acceleration YAngular acceleration ZAngular rateAngular rate XAngular rate YAngular rate Z
High g linearLinear acc XLinear acc YLinear acc ZLow g linearMixedECM2The following device(s) recorded no ethernet data:
EIDs foundDetailsDocument	File info>Nonlinear format {0} is not supported on sensor {1}, bypassingInvalid format: {0}Name\Warning - {0} was missing field 'PhysicalUnit'.  'EU' will be used as the measurement units.<Current DAS is modified, save before switching to a new DAS? Number of ADC samples per packetXNumber of samples (for all channels in stream) to include in each data packet in stream.*Auto arm and power on record delay seconds1Auto arm record delay in seconds, default value 0;{0} is an invalid multicast address, value has not been set.Controls the logging verbosity where supportedLogging verbosity(Manage clock sync settings outside of DPDWhen this is set DataPRO will not control and set the clock settingsRemove leap seconds-Remove leap seconds from streaming timestamps"SLICE6 multicast broadcast addressSLICE6 multicast response port&Streaming rate to -3dB frequency ratio5Controls options for -3dB streaming frequency filtersStreaming DSP filter type3Filter type for use on streaming DAS when streamingIDigital filter settings when using 6p Butterworth as the streaming filter	DirectionPCustom channel name already exists for another channel, please use a unique name#Failed to save custom channel - {0}Filter class	Fin loc 1	Fin loc 2	Fin loc 3LateralLongitudinal
Main location2the transducer main location {0} is expired - {1}.(new direction))Direction code {0} already belongs to {1},ISOCode field Direction Requires 1 Character+Direction {0} already exists and is not newDirection text required(new filter class)/Fine location 1 code {0} already belongs to {1}3ISOCode field Fine Location 1 requires 2 characters1Fine location 1 {0} already exists and is not newFine location 1 text required/Fine location 2 code {0} already belongs to {1}3ISOCode field Fine Location 2 requires 2 characters1Fine location 2 {0} already exists and is not newFine location 2 text required/Fine location 3 code {0} already belongs to {1}3ISOCode field Fine Location 3 requires 2 characters1Fine location 3 {0} already exists and is not newFine location 3 text required(new fine location 1)(new fine location 2)(new fine location 3)(new main location)-Main location code {0} already belongs to {1}<ISOCode field Transducer Main Location requires 4 characters/Main location {0} already exists and is not newMain location text required(new physical dimension)2Physical dimension code {0} already belongs to {1}6ISOCode field Physical Dimension requires 2 characters4Physical dimension {0} already exists and is not new Physical dimension text required1Position code {0} already belongs to position {1}+ISOCode field Position requires 1 character*Position {0} already exists and is not newPosition text required(new position)9Test object code {0} already belongs to main location {1}.ISOCode field Test Object requires 1 character-Test object {0} already exists and is not newTest object text required(new test object)&Type {0} already exists and is not newType text required
(new type)Phys dimPositionRemarksTest objectName
Name requiredTypeVerticalFiltered
UnfilteredCustomer cost unit
Customer nameCustomer name requiredCustomer order numberCustomer test ref number"Customer test ref. number requiredModified
Local onlyRecord nameProject ref numberRecord name required
Configuration	Module SN	Rack sizeACCARSBridgeCalibration dateChannels@Configuration is locked, use detect DAS to change configuration.
ConnectionFirmwareFirmware versionIEPE
IP address
Local onlyMax modulesMax sample rate (sps)Min sample rate (sps)NetworkNoneProtocol version
Serial numberMemoryTypeUSB
Delay (ms)
Duration (ms)Limit durationNameOutput mode
Default valueActive valueContact Closure Normally ClosedContact Closure Normally Open(Contact closed)(Contact open)Default Filter
Delay (ms)
Duration (ms)Channel filter class(High)Limit duration(Low)DisplayModeName(On and Off currently have the same value	Sensor IDA name is requiredTransition High-to-LowTransition Low-to-HighUnitsContact Closure Normally ClosedContact Closure Normally Open Five Volt High-to-Low Transition Five Volt Low-to-High TransitionSupport Non-ISO Mode	ISO LevelShow ISO codesSupport Transitional ModeUse user codes (instead of ISO) Laboratory contact name requiredLaboratory name required$Laboratory test ref. number requiredLaboratory contact emailLaboratory contact faxLaboratory contact nameLaboratory contact phoneLaboratory nameLaboratory project ref. numberLaboratory test ref. numberRecord nameRecord name requiredHChannel {0} does not support squib fire mode {1} required by setting {2}BothHardwareSensorsDistributorEthernet Controller6{0} channels required, {1} physical channels included.No hardware is selected7There are more required sensors than available channelsNamePictureDescriptionGlobal Range (CAC)ModifiedNameGroup name requiredTagsTemplateTemplate requiredTests Using+Error: {0} does not support bridge mode {1}(Error: {0} does not support CAN channels>Error: {0} contains a sensor ({1}) with an overdue calibrationBError: Common Status Line not supported with multiple sample rates*Error: {0} does not support digital inputs+Error: {0} does not support digital outputs0Error: channel {0} contains a duplicate ISO code<Error: sensor electronic id {0} ({1}) appears more than once Error: Group name already existsError: Group name required(Error: Calibration is due for {0} on {1}DError: {0} shares a hardware channel assignment with another channelBError: channel {0} contains an ISO code that is not 16 characters.FError: {0} does not support any excitations used by {1} on channel {2}4Sensor {0} appears multiple times in the test setup."Error: {0} does not support squibs+Error: {0} does not support streaming input,Error: {0} does not support streaming output2Error: {0} does not support thermocoupler channels$Error: {0} does not support uart i/oXError: {0} contains a sensor ({1}) which has reached or exceeded its maximum usage ({2})NThis Group is not compatible with your Tags (see below) and will not be saved.FWarning: {0} contains a sensor ({1}) with a calibration due soon ({2})@Warning: {0} contains a sensor ({1}) with an overdue calibration:Warning: channel {0} contains a duplicate ISO channel name2Warning: channel {0} contains a duplicate ISO code;Warning: channel {0} contains a duplicate user channel name3Warning: channel {0} contains a duplicate user code1Warning: channel {0} contains no ISO channel name)Warning: channel {0} contains no ISO code8Warning: channel {0} contains an empty user channel name*Warning: channel {0} contains no user code*Warning: Calibration is due for {0} on {1};Warning: channel {0} refers to a sensor no longer available\Warning: {0} contains a sensor ({1}) which is nearing its maximum usage ({2} uses remaining)Active value7Are you sure you want to pull parameters for sensor(s):EThe following sensor(s) are currently being modified by other users: <01>Do you want to end the edit session(s) for these sensors?  Press Yes to end the edit session and pull parameters, or No to leave the edit session(s) in place.yThe following sensor(s) are currently being modified by other users.  Parameters from these sensors will not be applied: 
Default value
Delay (ms)
Duration (ms)Filter	Fire mode3Group name already exists, please use a unique name)only Non-ISO groups valid in Non-ISO mode
Input modeInvalid group namehGroup can not be saved:
{0}
Press OK to navigate away without saving or Cancel to remain in edit groupLimit durationNo changes to pull.)Non-ISO groups only valid in Non-ISO modeOutput currentOutput modePolarity5Group name not allowed (reserved for Dynamic Groups).RangeEWarning: Sensor {0} on channel ({1}) range exceeds capacity {2} < {3}Zero method (mode/start/end)p{0} assigned channel(s) out of {1} required channel(s).  With {2} of {3} available physical channel(s) assigned.BridgeCAN
Digital InDigital Out	Stream In
Stream Out
ThermocouplerUARTAnalog
Digital inputDigital outputInputOutputSquibAllAnalogAssigned(Assigned by ID)(Assigned by ID)>Sensor with Bypass AAF checked is not supported on channel {0}DAS ChannelClearClear all channelsDelete
Digital InDigital Out<01>Drag one or more sensors here to create new channels at the bottom of the table.
ALT+Drag one or more sensors onto existing channel to insert above.
ALT+Up / ALT+Down to move selected channels up/down and change order.8Low tolerance value is greater than high tolerance value<01>Drag and drop sensors or hardware here to create new channels
Drag a squib or digital output hardware channel to create a squib or digital output setting)Sensor ID {0} appears on both {1} and {2}EmptyHardware<01>Drag and drop sensors or hardware channels to ISO channels to assign them.
Use ALT+Up/ALT+Down to rearrange the order of channels.RDimension ({0}) of sensor ({1}) is different than dimension ({2}) of channel ({3})-{0} is defined as '{1}' but is actually '{2}'7Channel {0} does not support {1} required by sensor {2}KChannel {0} does not support digital input mode {1} required by setting {2}`Channel {0} does not have any excitation options matching any calibration records for sensor {1}@Channel {0} was detected as IEPE and does not support sensor {1}DChannel {0} was not detected as IEPE and does not support sensor {1}*A valid calibration was not found for {0}.r{0}: No unit conversion available for {1} to {2}. Please add unit conversion or select a new Display Unit for {0}.ANone of the selected hardware supports {0} required by sensor {1}LNone of the selected hardware supports {0} excitation required by sensor {1}.No hardware assigned.  Please assign hardware.6No hardware supports bridge {1} required by sensor {0}BNo hardware supports any of the excitations required by sensor {0}#No sensors are in the current groupOnlineChannel ListFiltered
UnFiltered,Highlighted cells will use ID for assignment^Sensor EID {2} on channel {0} belongs to IEPE sensor {1}, but channel was detected as non IEPE^Sensor EID {2} on channel {0} belongs to non IEPE sensor {1}, but channel was detected as IEPESensor SN AssignedSensors AvailableFiltered
UnFilteredShow bottom rowSquibSquib	Stream In
Stream OutIDrag and drop sensors or hardware channels to ISO channels to assign themTypeUART
UnassignedWarning&Are you sure you want to delete '{0}'?$Please repeat deletion confirmation.
DO Delay (ms)DO Duration (ms)Output modeRemoveSQ Current (A)
SQ Delay (ms)SQ Duration (ms)SQ ModeSQ Limit DurationSensor SN (Sensor Name)	Baud rate	Data bitsData formatFlow controlParity	Stop bitsUnitsCompatible template(s)Subtemplate(s)AddAddDeleteDeleteDescription	DirectionFilter class	Fin loc 1	Fin loc 2	Fin loc 3ISO code
Main locationNamePhysical dimensionPicturePositionRegion descriptionRegion nameSelect zoneTest objectChannel	Comments1	Comments2Custom
Display orderISOCodeLaboratory channel codeNameName of channel	Dimension
Pre filterReference systemRequiredTransducer typeUnitsChannel TypeChannels requiredDescription-At least 1 channel is required to be selected<01>Group Template name must be less than 256 characters (if Added Group, sum of Test Setup name and Added Group name must be less than 246)A name is required
Local onlyModifiedModified byTypeNameTest object4Some required channels do not have a sensor assigned6Since no channels are selected, no hardware is allowedNo hardware is selectedExit without saving?YGroup has been changed by another user.  No changes can be saved until group is reloaded.HardwareChannelsIncludedStatusTypeGroupDAS ChannelChannel NameRegionRequiredSensorZoneRealtime sample ratesChart width (seconds)Delay between polls<01>period between retrieving data from DAS (ms).  Too high of a setting may result in data drop out, too low of a setting may result in putting a stress on available resources.%Enable dynamic real-time optimizationHigh draw delay<Maximum time (ms) between UI updates when data is available.Level trigger auto advanceLevel trigger beep countLevel trigger idle beep%Level trigger idle beep interval (ms) Level trigger beep interval (ms)"Level trigger default value (% FS)Level trigger freeze time (sec) Level trigger qualifying samplesLow draw delay<01>Minimum time (ms) between UI updates when data is available.  Too low of a setting may cause UI to become unresponsive.  Too high of a delay may result in jerky realtime performance.Level triggers on.Level trigger require trigger check completionRealtime sample rateSample rate SLICE 6Realtime streaming rate (SLICE)Realtime sample rate (Slice IP) Realtime sample rate (Slice USB)Realtime sample rate (TDAS G5)Sample rate<01>Samples per second for realtime data acquisition.  Too high of a setting may cause data drop out, and too low of a setting may cause aliasing.=Whether to save snapshot to windows clipboard or to CSV filesSave snapshot to clipboardRealtime UDP addressUse meter modeJPolls all active sensors and allows selecting sensors by tag in meter modeUse meter mode table styleUse test channel orderUse UDP streamingSpecify mV for 0 EU0Initial offset in eu center and percent requiredTagsUnipolarJMarking sensor 'Broken' or 'Do Not Use' will remove sensor from following:>Warning:{0}Press OK to continue, or Cancel to stay on the pageCreate sensor templateMeasure bridge(s)5{0} is missing a calibration entry for excitation {1}DWarning,{0}{1}{0}Press OK to continue, or Cancel to stay on the pageStatusChannelsDASQuerying configurationAxis 1Axis 2Axis 3Axis 4Axis 5Axis 6AssemblyAxis 1Axis 2Axis 3Axis 4Axis 5Axis 6Resistance (Ω)
Bypass AAFCalibrationSensor max rangeCheck	DimensionDisplayDisplayUnitsDefault FilterGlobalISO NameISO CodeInfo
Initial EUManufacturerNew Manufacturer Name
Maximum usageUnitsModelNew Model NameName
Midpoint (EU)
Threshold (%)HighHigh (V)	High (mV)LowLow (V)Low (mV)PhysicalPolarityProperty
Range High	Range LowRange Medium	Sensor ID
Sensor OffsetSensor type
Serial numberShuntSupported excitationUsage count	User Code	User NameBrokenChannel typeAnalogCAN
Digital inputDigital outputSquibStream input
Stream outputUART
Do not useInspect before use-Sensor ID is already in use by another sensorNew Manufacturer Name requiredGThis Manufacturer/Model pair already exists, please change one or both.Model requiredOWarning: Only bridge resistances in the range of 100
 to 32000 Ω will be used	Dallas IDAxisMeasuring bridge resistanceCal interval (days)Check offset>No alternate unit or conversion unit available for {0} to {1}.ChannelDoneOnlineScanningSensor	Sensor IDManufacturerModelName
Non-linearTypeSimple with average over timeSet 0 EU during diagnostics
Polynomial#y = (Vout-intercept)/slope (legacy)Number of axes1Initial offset eu high is less than low threhsoldOffset toleranceHighLow
Remove offset
Resistance
Serial numberSerial number requiredShunt checkShunt methodZero method	End (sec)Start (sec)Alternating currentCurrentCapacitor dischargeConstant currentDefine delay in test
Delay (ms)
Duration (ms)Firing modeLimit durationMeasurement typeName	Sensor IDHigh tolerance (Ω)Low tolerance (Ω)Voltage
Current(ohms)
Delay (ms)Description
Duration (ms)	Fire modeAC - cap dischargeDC - cap dischargeDC - constant currentISO codeLimit durationTolerance high (ohms)Tolerance low (ohms)UDP addressStream profileGWell-formed udp address string required. Format is 'UDP://x.x.x.x:yyyy'Data channel idLAdvanced stream profiles can be enabled in System Settings - Sensor settingsTime packet interval (ms)[Valid TmNS configuration string required (8 parentheses-enclosed, comma-separated integers)Invalid stream profile: {0}TMATS interval (ms)Time channel idTmNS configUDP addressStream profile
Dynamic group*Warning: No initial offset set on channel Recorder and streamRecord nameRecord name requiredTest engineer emailTest engineer faxTest engineer nameTest engineer phone.There are currently no analog sensors assigned.There are currently no digital inputs assigned/There are currently no digital outputs assigned&There are currently no squibs assigned-There are currently no stream inputs assigned.There are currently no stream outputs assigned%There are currently no UARTs assignedApplyModify Global Range CAC?Do not allow data collection with overdue hardware calibrations$Sample rate invalid for included dasBrowseClearAllow push/pull of sensorsAutomatic progress delay (ms)Automatic mode delay (sec)Automatic test progression(Add DAS serial number line to CSV export8Allow data collection with overdue hardware calibrationsKAllow data collection with a grace period on hardware calibration due dates&HW calibration due grace period (days)HW calibration policy%Calibration due warning period (days)Connect timeout SLICE (sec)Connect timeout TDAS (sec)Default digital out modeAAF RateChannel CommentChannel DescriptionChannel NameDIAdem Channel Name (200)Channel Sensitivity
Group NameISO CodeNoneDIAdem Reserved 1 (301)DIAdem Reserved 2 (302)Sensor Serial NumberDIAdem User Comment (201)Enable editing device AAF rate&Enable ADC samples per packet warningsExport INI file*INI file (*.ini)|*.ini|All Files (*.*)|*.*G5 cal interval (days)Communication timeouts DAS calibration intervals (days)Data export optionsFeaturesHardware Setting DefaultsTest Setups import optionsLevel TriggersLevel Trigger max percentageLevel Trigger min percentageSample rates and AAF rates
Max AAF G5Max AAF TDAS PROPowerPRO cal interval (days)SLICE 1.0 cal interval (days)SLICE Base+ cal interval (days)SLICE PRO cal interval (days)SLICE 6 AIR cal interval (days)'SLICE 6 Distributor cal interval (days)SLICE 6 cal interval (days)!Sensor calibration overdue policy,Sensor calibration due warning period (days)TDAS cal interval (days)TSR AIR cal interval (days)Check trigger quick mode%S6DB RTC expected battery life (days)<01>Removing this group will cause it to be deleted, not simply moved to the "Available groups" column.  Would you like to continue?AddExisting calculationsInput ChannelsNameDCalculated channel name is invalid, must be less than 250 characters)Calculated channel names can not be empty1Calculated channel {0} contains no input channelsOperatorSumSearcheWarning: This test setup has Calculated Channels, but your System Settings aren't enabled to use themMCalculated channel {0} contains input channels of different measurement unitsSupports realtimeFAre you sure you want to clear all Sensor and DAS Channel assignments?DistributorEthernet ControllerSLICE Mini Distributor<01>Removing this Dynamic Group will cause one or more channels to no longer be displayed in the following graph(s): {0} Would you like to continue?	New graph)The Group is currently in edit mode{0}{0}_Are you sure you want to pull Group changes?{0}The following test channels will be impacted:{1}<01>Removing this Group will cause one or more channels to no longer be displayed in the following graph(s): {0} Would you like to continue?<01>Removing this Group will cause one or more channels to no longer be displayed in the following graph(s): {0}Additionally the group is currently unique to this test setup and won't be available in available groups.   Would you like to continue?<01>This group is currently unique to this test setup and won't be available in available groups if removed.  Would you like to continue?<01>This Group is not compatible with your Tags (see below) and will be removed and not listed in Available groups if you choose Continue.  Would you like to continue?${0} not found - update not possible.Channel typeGAuto-arm is not allowed. Set the AllowAutoArm setting to True to allow.0The following hardware does not support {0}: {1}+ROI period cannot be greater than test time0The following hardware does not support {0}: {1}({0} has a maximum sample rate of {1} SPSat {0} configured channelsF{0} has a maximum sample rate of {1} SPS when recording UART at {2}bpsK{0} has a maximum sample rate of {1} SPS when streaming over UART at {2}bps({0} has a minimum sample rate of {1} SPShWarning: Measure Squib Resistances step was chosen, but no Squibs are in the test. Step will be skipped.6Packet not validated due to unsupported DAS type ({0})6Packet size not validated due to unknown profile ({0})JStreaming is not allowed. Set the AllowStreaming setting to True to allow.UError: Streaming is not available on {0}.  Please contact DTS to add this feature.{1}jStreaming packets too large - consider lowering ADC samples per packet in System Settings -> Test settingslStreaming packets too small - consider increasing ADC samples per packet in System Settings -> Test settings|Warning: Streaming packets will be fragmented - consider lowering ADC per packet setting in System Settings -> Test settingsAvailable channel(s)Device channelExisting trigger channel(s)
Maximum rangeSensor information
Only above
Only belowTrigger inside boundsAbove or belowZero methodOptionscThere are already {1} level triggers on {0}.  This device does not support any more level triggers.MLevel trigger for '{1}' must be at least {0:0.0}% of capacity ({2:0.00} {3}).CLevel trigger for '{1}' must not exceed {0}% of capacity ({2} {3}).`There is already a level trigger on {0}.  This device only supports one level trigger at a time.ISO meta detailsExtra PropertiesExtra Properties (channel)Test objects
Test settingsBarrier height {0}Barrier width {0}Class of test object {0}Code of test object {0}Comments of test object {0}Driver position object {0}Impact side test object {0}Mass test object {0} (kg)Name of test object {0}Number of loadcells {0}
Offset {0}Origin x {0}Origin y {0}Origin z {0}Ref. number of test object {0}Reference system {0}Type of test object {0}Velocity test object {0}
Yaw angle {0}<01>Modifying Group position will cause all customized parameters (Range (CAC), Channel Filter Class, and Polarity, etc.) to default to Group settings. To preserve any custom Test Setup parameters, change parameters after setting the position of a Group.DescriptionFilter classNamePositionTest object
Channel(s).Warning: One or more groups have been modified({0} in {1})$Error: Position value {0} is invalid/Warning: One or more sensors have been modifiedsome channel(s)'Error: Test Object value {0} is invalidOKBCurrent test sample rate has been limited by newly added hardware.XError:  Channel {0} refers to a sensor that is not available (missing/broken/do not use)<01>{3}Warning: AAF Rate entered for {0} ({1}) is greater than the sample rate ({2}).{3}Check the "Enable editing device AAF rate" checkbox in System Settings to modify the "AA Filter (Hz)" field in Hardware step.<01>{2}Error: AAF Rate entered for {0} is out of range (max is {1}).{2}Check the "Enable editing device AAF rate" checkbox in System Settings to modify the "AA Filter (Hz)" field in Hardware step.9sensor type {0} not supported on channel {1} in group {2}KSensor with Bypass AAF checked is not supported on channel {0} in group {1}6Couldn't find sensor {0} for channel {1} for group {2}9JCODE {0} for {1} {2} already assigned to a channel ({3})<Error: sensor electronic id {0} ({1}) appears more than once0Error: DAS sample rates are not evenly divisible<(Error) Test must be updated from db before it can be saved.)Error: There are no data channels in test?Interval length must be more than Event length plus {0} secondsBChannel {0} in group {1} refers to hardware that is already in use*Some hardware does not support auto-arming(Some hardware does not support streaming<ISO code {0} for {1} {2} already assigned to a channel ({3})_Dimension ({0}) of sensor ({1}) is different than dimension ({2}) of channel ({3}) in group {4}<01>{1}Warning: SLICE6Air sample rate cannot be higher than {0} when digital filtering.{1}DSP filtering can be set to "None" in the "Advanced settings" step on the "System Settings" tab.{1}hChannel {0} in group {1} refers to hardware that is not available.  Hardware assignment will be removed.mTest setup can not be saved:
{0}
Press OK to navigate away without saving or Cancel to remain in edit groupWError:  Level triggers of 5g or less are not allowed with the wake up on motion feature>Error: Level Triggers not supported with multiple sample rates-Error: At least one Level Trigger is required7Missing calibration records for {0} (sensor serial {1}).Missing excitation for {0} (sensor serial {1}),Sensor {2} not found in database for {0} {1}.A required channel is missing a sensor {0} {1}r{0}: No unit conversion available for {1} to {2}. Please add unit conversion or select a new Display Unit for {0}.DThere are {0} duplicate isocodes.  Please check positions of groups.CThere are not enough analog channels to support sensors in the testKThere are not enough digital input channels to support settings in the testLThere are not enough digital output channels to support settings in the testCThere are not enough squib channels to support settings in the test"Test requires at least one Channel Test requires at least one GroupTest requires HardwarecThere is standin hardware in the test.   Test can not run till it is replaced with actual hardware.&Some channels have no sensor assigned.JScheduled start time must be at least {0} minutes after unit(s) are armed.7Sensor ID {0} on {1} {2} is already assigned on {3} {4}4Sensor {0} appears multiple times in the test setup.tError: TSRAIR devices in Active mode starting recording via level triggers require a pre-trigger time greater than 01A test setup with TSRAIR devices require realtime*A test setup with this name already exists.Warning: There are no channels collecting data/Warning: There are no hardware channels in test
{0} of {1}3Error: channel {0} does not have Delay (ms) definedROI x ChannelsROI Channel SelectionDistributorEthernet Controller<01>Warning: There are a limited number of samples of available in 'Active' recording mode, pretrigger available may be down to {0:0.000} seconds.  ROI downloads less than that will use whatever is available.Add	Add Group
Add new graphAlign UDP to PPSAllow missing sensors
Arm checklistSet DAS to Auto-Arm
Auto progressAuto progress delay (sec)Automatic modeAutomatic mode delay (ms)Automatic mode delay (sec)Available channel(s){0} hrs, {1} mins.Available recording time: Available groupsCheck battery voltageOut of date cached items1Realtime channels are only aligned within one DASCalibration BehaviorMultiple (click for defaults)Channel Type$Require all units pass arm checklist.Checkout mode (internal squib fire during arm)Circular and streamCircular bufferCircular buffer multiple-eventsCircular buffer + UARTCheck clock syncClock Master Input Clock TypeClock Slave Input Clock TypeClock Master Output Clock TypeClock Slave Output Clock Type
PTP Type/Mode
Clock syncCommon status lineContinuous RecorderCustomer detailsCustomer presetPost-trigger second(s)Pre-trigger second(s)Samples per second
Serial numberTest length in secondsData acquisition system setupDescriptionDiagnostic optionsDownload allDownload and view options!Download region of interest (ROI)Repeat Auto-ArmRepeat StreamingError: Duplicate group name {0}Event length in secondsCheck start/event line(s)
Event Number:Event start method Prepare Hardware delay second(s)Existing graph(s)Exit without saving?ASCCSV	Chapter10DDASDIAdemExport data
Export formatHDFISOExport optionsRDFSoMatTDASTTSTDMSTSVExcel (xlsx)Graph channel(s)Description
Graph details
Graph name[the group {0} could not be updated, the source group may have been deleted by another user.<01>Some Groups in this Test Setup have been modified in the Groups tab.  Click "Pull group" for any Group to get the latest version.)Test Setup Id contains invalid charactersIgnore shorted startIgnore shorted triggerInfoCheck input voltage(Interval between event starts in minutesAGroup {0} channel {1} does not support {2} required by sensor {3}AGroup {0} channel {1} does not support {2} required by sensor {3}:Group {0} does not support excitation required by {1}({2})Invert start record completionInvert trigger completion-The following items were updated from the db:Lab details
Lab presetLevel-Trigger Setting:MWarning! The use of Level-trigger is not recommended for destructive testing.$Use linear sensitivity, if availablems%Manage master clocks outside DataPRO?Measure squib resistances stepOKMultiple (see Hardware)Test Setup name$Name cannot be ISO, CSV, or Realtime*Name cannot contain double-byte characters7Name contains invalid characters for paths or filenamesTest Setup name is required
(no channels)INone of the selected hardware for {0} supports {1} required by sensor {2}INone of the selected hardware for {0} supports {1} required by sensor {2}4No channels support excitation required by {0} ({1})KThe test setup is no longer locked by the current user and cannot be saved.(Use non-linear sensitivity, if available-Real-time: suppress view all channels warning*Viewer: suppress view all channels warningNumber of eventsNumber of graphsGroups<01>Saving the test setup will update all cached items to their current state in the database. Press OK to continue or Cancel to return without updating or saving.Perform arm checklistPost-trigger second(s)Power management/Wake upPre-trigger second(s)ChannelsHardwareSensors
Pull groupSuppress quit test warning     ROI period end (sec)
ROI period     ROI period start (sec)GWarning: ROI end ({0} seconds) is after Post-trigger data ({1} seconds)IWarning: ROI start ({0} seconds) is before Pre-trigger data ({1} seconds)Test ID Suffix:Realtime optionsRecorderRecorder multiple-eventsRecorder + UARTRecording modeRecording optionsRemoveRemove groupAEither select at least 1 channel or remove the {0} Dynamic Group.<Report is already in use.  please close excel and try again."Require all units pass diagnostics%Require id found for sensors with ids#Require user confirmation on errorsRun diagnostics,Run post-test diagnostics on analog channels<01>Included hardware will be sampling at rates:

{0}

Sample rate per device is displayed and configurable on the Hardware navigation stepSamples per secondSearchCheck sensor idsSensor sample rates
Show realtimeXThe Show Sensor/Channel user values checkbox needs to be checked to modify User Value 2.$Manage slave clocks outside DataPRO?Measure squib resistancesStart recording with event lineCheck Trigger stepSet DAS to Streaming Suppress missing sensors warning_This license is for TSR AIR hardware only. Please remove the following hardware to continue {0}TError: User Value 2 in Parameters step must be a double when TTS export is selected.TagsCheck temperatureTest DetailsTest engineer detailsEngineer preset	Test infoGroups in test#Unknown: Test Setup has no hardware
Test tags:Check tilt sensor(s)
Check trigger'Turn off excitation when test completesUpload dataUpload Export file(s) only
Upload folderUpload options:Use both sensitivities, if available, as separate channelsUse customer detailsUse lab detailsUse test engineer details[Error:  This Test Setup is not compatible with your Tags (see below) and will not be saved.
User tags:
Verify allVerify dataView allView ROIWake up with motion!Warn on missing or failed battery Warning: ISO code {0} is invalidCapacity display formatDisplay offset in EUexample: {0}Non-Linear display formatRemember test id affixesSensitivity display formatTrigger seconds display format	Baud rateBinary	Data bitsData formatEvenFlow controlMarkNMEANameOdd1.51ParityTextRTSRTS/XonXoffSpace	Stop bits2XonXoffPlease provide a display name
AdministratorGuest
Power userUserAdminDenyEditReadRead and executeGAre you sure you want to apply these defaults to the following user(s)?Display nameModifiedModified byRole	Search:  ,TSR AIR family test setup settings for user:Tags:  Test setup settings for user:	User name
Apply to: Confirm passwordDisplay name
Last modifiedLast modified by
Local onlyPasswordTagsUsername	User role,Enable input and output clock source options0Enable region of interest (ROI) download optionsabovebelowHumidityPressureTemperature
Header Items:Error<01>There was an error communicating with ({0}).  The device may be in boot loader mode (waiting for new firmware).  Please contact Technical Support.,{0} reported an error during downloading {1},Error:  Start and end time can't be the same)Error:  End is greater than max available$Error:  Start can't be after the end(Error:  Start is less than min available@Failed to start downloading.  Please try running download again.XError:  '{0}' has an invalid level trigger value '{1}' ({2} g and {3} g are the limits).5No network resources available, discovery unavailableCError:  Recording mode {0} can't be used with 'Set DAS to Auto-Arm'.Warning, Sensor {0} has no calibration historyHWarning, Sensor {0} has a calibration with an unsupported excitation {1}YWarning, Sensor {0} has a calibration for an excitation not supported by the sensor ({1})ErrorsDASFailedStartStatusPassedTriggerChannel Name
Group NameISOCodePolarityRange (CAC)Sensor SN (Name)Software Filter
Test setup	User Code"Failed to get Safety switch statusNot specified [excitation]5 volt excitation2.0 volt excitation10 volt excitation2.5 volt excitation3.0 volt excitationExclude selected
Load settings
Save settingsData RecordersBrowseExport FileInclude All	Clear AllExportADCBrowseType:DIAdem Channel Name (200)DIAdem Reserved 1 (301)DIAdem Reserved 2 (302)DIAdem User Comment (201)FilteredBrowseColumn separatorCommentsCommentsCustomer cost unit
Customer nameCustom column orderCustomer order numberCustomer project ref. numberCustomer test engineer emailCustomer test engineer faxCustomer test engineer nameCustomer test engineer phoneCustomer test ref. numberDate of the test (yyyy-mm-dd)Errors occurredFilename(Choose {0} Filtered, Unfiltered, or bothFolderInclude field headersExport to individual filesLaboratory contact emailLaboratory contact faxLaboratory contact nameLaboratory contact phoneLaboratory nameLaboratory project ref. numberLaboratory test ref. numberName of the channelNew subtypeNew typeMedium no./number of mediaReference temperature
RegulationRelative air humidity
Save settingsSubtype of the testBarrier height {0}Barrier width {0}Class of test object {0}Code of test object {0}Comments of test object {0}Test object {0}Driver position object {0}Impact side test object {0}Mass test object {0} (kg)Name of test object {0}Test object numberNumber of loadcells {0}
Offset {0}Origin x {0}Origin y {0}Origin z {0}Ref. number of test object {0}Reference system {0}Type of test object {0}Velocity test object {0}
Yaw angle {0}TitleType of the testAdd to list+Invalid customer name - a value is required<Invalid customer test reference number - a value is requiredInvalid date of the testInvalid export folder5Invalid laboratory contact name - a value is required-Invalid laboratory name - a value is required>Invalid laboratory test reference number - a value is requiredInvalid massInvalid reference temperatureInvalid relative air humidityInvalid subtypeInvalid test typeInvalid velocity+No options available for this export format{0} ROI cannot be a length of 0Type:Sub sample interval (samples)Data set is too large to filterBrowseDestination file:Post trigger (seconds):Pre trigger (seconds):Sub sample interval (samples)
UnfilteredExport failed - {0}Export finishedAssociated Test SetupsChannelsDescription
Last ModifiedLast Modified ByNameExport settingsKChapter 10 export can't export both analog and pcm formats at the same timeWorkingDoneFailedWaiting for user inputObjectBrowseOptionsOrder numberDetailsOutput fileOutput file requiredBOverwrite existing file?  Press OK to overwrite or cancel to stop.Owner	RecipientSenderColumn separatorCustom column orderExport first use dateFormatCSV (*.CSV)Equipment exchange (*.e2x)Sensor information file (*.sif)Sliceware (*.xml)BrowseFilenameFolderInclude field headersExport to individual filesCancelDataPRO XMLEQX
Export formatFileFolderTNo sensors are currently in the export.  Please select sensors to include in export.
SLICEWare XML"Export only TDC compatible sensorsTDAS Control Sensor DatabaseWaiting for user selectionStatusUser canelled exportBacking up existing fileBrowse	CancelledDone#Successfully exported {0} sensor(s)FailedHFile currently in use, please close any applications using the file {0}.Select sensors to exportAllNoneWriting header fieldsBrowse;DataPRO Settings XML File (*.xml)|*.xml|All Files (*.*)|*.*DescriptionDoneExport fileFailed`The file {0} will be overwritten.  Do you wish to continue?  OK to continue or Cancel to cancel.IncludedTypeWaitingWorking	Data typeAnalog data countsFiltered EU
Unfiltered EUEnd timeSeparate file for each channel
Start timeInclude time columnFormatCSV (*.CSV)DIAdem (*.dat)ISO (*.mme)Somat (*.somat)Test log file (*.tlf)Tsv (*.tsv)TDM (*.tdm)Export all Custom ChannelsBrowse2DataPRO XML File (*.xml)|*.xml|All Files (*.*)|*.*CustomerDescriptionDoneExport fileFailed`The file {0} will be overwritten.  Do you wish to continue?  OK to continue or Cancel to cancel.	ImportingIncludedNameReadingWaitingWorkingTCFASCCSV export infoExport cancelled
Chapter 10DIAdem export info/Data is too large to be exported in ISO format.Export dataExport dataHDF export infoISO export info1Select PCM or Analog format for Chapter 10 export2No region of interest has been selected for exportOther
Export path: *Export failed, the export path is too long<01>Warning: files with export data already exist in{0}{1}{2}{3}{4}Select 'Yes' to overwrite the old files, or 'No' to discontinue the export.{5}{6}Alternatively, you can preserve the existing test files by moving the files in this folder to another location before selecting 'Yes'.:ROI '{0}' has no channels selected and will skip exportingCalculating export sizeExport cancelled
Export failedExport finishedExport format not implemented	ExportingExporting {0}%4Modify fields, if needed, then click on 'Run' buttonN/ANo channels to export
Validating<01>Export {0} contains multiple sample rates.  The export will be resampled using linear interpolation to the highest sample rate in the test.TTS export infoTSV export infoExcel (xlsx) export info	Sensor/IdCh #TypeDAS@Digital input mode ({0}) not supported on channel for sensor {1}ADigital output mode ({0}) not supported on channel for sensor {1}Module4No supported excitations on channel for sensor ({0})0Bridge type ({0}) not supported on channel [{1}]=Sensor id conflict [{2}], sensor id {0} belongs to sensor {1}@Sensor id ({0}) for sensor {1} conflict with id on channel ({2})0Sensor id ({0}) for sensor {1} is not on channel=Squib fire mode ({0}) not supported on channel for sensor {1}Ch #DASDescriptionISOCodeModuleSensorISOCodeNameCal Due DateCapacityName
Display UnitsManufacturerModel
Serial NumberAddAdvanced
Advanced Mode`Includes basic test setup creation and adds sensor creation and custom channel creation featuresBasic
Basic Mode@Basic test setup creation (no sensor or custom channel creation)CancelCapacityDASDescriptionChannel DetailsFilter ClassISOCodeModule'Channel {0} was not found on object {1}Ch #PositionRange (CAC)Test Object
UnassignedConnectCreate Custom ChannelCreate New SensorDASDuplicate ISOCode {0}Included and Discovered SensorsChannel:PositionData Channel DetailsTest Object
Channel Type:<There are multiple types of channels on the same test objectNameStep 1:  Available Hardware#Step 2:  Discovered DAS and SensorsStep 3:  ISO Channels#Step 3:  Physical and Data ChannelsStep 4: Sensor SettingsStep 5:  Test SettingsPingPolarityMThis will restart the test setup process.  Are you sure you want to do this? Save and add anotherSave sensorSearchSensorSensor DetailsSensorsSensors Available5Test ID (Fill in if continuing on to data collection)1Test Id can't contain 'csv', 'iso', or 'realtime'Non-empty Test ID requiredTest Object
Test savedUnassignUse An Existing Channel	Channel #	Sensor IdSensoraDAS have disconnected from the system, aborting the test is recommended. Please check connectionsFailed*failed arm process, check log for details.
Failed to armFailed to backup local databaseFailed - file not found -!Failed to connect remote database!Failed to copy remote database - Failed to export history file,Failed to generate ROI data from all datasetFailed to obtain lock/Warning, failed to push group to test setup {0}Failed to read settingsFailed to save test.Failed to update lockFailed to write settings$Failed to write temperature log, {0}&Failed to write test summary file: {0}/Are you sure you want to close Feedback window?Command RequestCommand ResponseCopied to clipboardCopy to clipboardErrorInformationSaveSaved in {0}FeedbackWarning(Double click to launch the Feedback viewFile not found\File {0} will be overwritten.  Press OK to continue or cancel to return without overwriting.
{0} not found<Controls the default software filter to apply to sensor dataSoftware filter+Fire TOM digital outputs during diagnosticsFirst use dateEWarning: Sensor first use date ({0}) is before calibration date ({1}).Warning: First use date is in the future ({0}).The following unit(s) are currently armed: {0}9The following unit(s) are currently set for auto-arm: {0}5The following unit(s) have changed configuration: {0}9The following unit(s) have expired calibration dates: {0}9The following unit(s) have unexpected channel counts: {0}<01>The following G5(s) docking stations were not detected: {0}

- Click "OK"
- SWITCH OFF Docking Station
- REMOVE POWER from Docking Station and wait 10 seconds
- APPLY POWER to Docking Station, SWITCH ON and try again
  <The following unit(s) have unexpected firmware versions: {0}7The following unit(s) have unexpected memory space: {0}9The following unit(s) are currently in realtime mode: {0},The following unit(s) are not available: {0}:The following unit(s) were detected with flash issues: {0};The following unit(s) are connected, but not in the db: {0}NThe following unit(s) are currently attached but are not part of the test: {0}8The following unit(s) are currently ready to stream: {0}2The following unit(s) are currently streaming: {0}DAS unavailable	Update DbLogin: DB unavailable*The name {0} is reserved and can't be usedG5G5 (VDS)GainGetting test setupGetting test setups	(Current)	(Voltage)group<01>Group {0} is being edited by {1} on {2}.  Press OK to take control of group or cancel to remain on the page without editing.  Taking control of the group will end the edit by {1}.'Group {0} is being edited by {1} on {2}<01>Pressing OK will get edit control over the sensors listed and end the edit sessions of the users currently editing the sensors.  Pressing cancel will skip the groups listed and keep the the existing edit sessions in place.Group not foundGroup Tag(s): \Changing test type will remove all required channels for this group. Do you want to proceed?
Create NewYesModify
(multiple)*Total Channels: {0} Required Channels: {1}HTemplate is currently in use by one or more groups and can't be deleted.^The following Groups had Channels assigned to unknown DAS and have had the assignment removed:
Export ADC	Export EU	Export mVInclude logsInclude reports
Include setup5at least one type of HDF export type must be selectedHICAcceleration XAcceleration YAcceleration ZClip length (ms)-No calibration data found for {2}({1}) on {0}NHardware channel {0} does not support required excitation voltage of {1} ({2})DASTypeChannelModuleCH #Sensor600K SPS (18 CH)700K SPS (15 CH)800K SPS (12 CH)AddAdd newAdd/Update DASAnalog:at IPAddress
Available DAS{0} channel(s)Channels
ConfigurationPhase 3: Connect DASPassed	Connected Results: Currently connected DASOffOnCurrent DAS listDASDAS channelsStatusTypeDigital Out:<01>Child {0} was detected, but parent {1} was either not detected or didn't list the child as connected to it. Disassociate these devices?Phase 1: Define IPAddress ListFailed (could not connect)Failed (unit armed)	found {0}Hardware discovery
IP addressIP addressesInclude ConnectedInclude selectedInclude sensorsIncluded DASLast action
Last replyLast AttemptLatency (ms)
1M SPS (9 CH)NameConnect to get serial numberOnlineChannelsPhase 2: Ping DASPing failedGood---
Ping {0}ms	Timed outRemoveSLICE1 module (8 channels)2 modules (16 channels)3 modules (24 channels)+Press scan to discover hardware and sensors*Select hardware to view discovered sensorsSensorsSerialNumberSkippedSquib:StatusTDASAll channels
Low g onlyLow g + High gLow g + High g + ARSPThis license is for TSR AIR hardware only. All other hardware have been removed.TypeType5Warning!  The following unit(s) are currently armed: ;Warning!  The following unit(s) are currently in realtime: Unknown sensor - {0}AddKeepRemoveUpdateActionBattery Voltage StatusCal dateChannels
Connection
Serial NumberFirmwarefound {0} of {1}IncludeModuleInput Voltage StatusRemove
Scan/Query
Sensor Ids
Serial numberStatusALLAllData Recorders: Edit Group: {0}Edit Test Setup: {0}Manual
AutoDiscoverySLICESLICEShow modulesTDASTDASType2DataPRO XML File (*.xml)|*.xml|All Files (*.*)|*.*Done!Delete all sensors, are you sure?Save*XML File (*.xml)|*.xml|All Files (*.*)|*.*Usage Report cancelled`The file {0} will be overwritten.  Do you wish to continue?  OK to continue or Cancel to cancel.Warning: DAS armed and waiting!<Warning: DAS is auto-armed and will be armed when restarted.<01>Warning: DAS is ready to begin streaming when restarted.{0}{0}Clicking 'Stop Monitoring' prior to removing the ON signal will allow the units to be controlled when they re-connect, without having to restart DataPRO.Warning: DAS is streaming!AWarning: DAS is armed and waiting for an event to start recordingUWarning: DAS is armed and waiting for the end of the current interval between events.?Warning: DAS is armed and waiting for the scheduled start time.Recorder discoveryAdd{0} channelsAbortAddDoneDoneConnectPingSaveUpdateNoYesDoneSave and add anotherSaveBuild Test SetupConnect
Scan selectedScan allRun test setupQuery selectedAdd/update HardwareAdd
AutoDetectDiscover hardwareNoYesUsage Report
Delete allDeleteEditExportImportRunData RecordersApply configDoneDAS listDiagnosticsNextPrevRealtime<01>Module {0} appears to be in a docking station, but does not acknowledge its presence.

- Click "OK"
- SWITCH OFF Docking Station
- REMOVE POWER from Docking Station and wait 10 seconds
- APPLY POWER to Docking Station, SWITCH ON and try againCancelContinue~Post-test diagnostics has been selected, but will not be run because G5s do not support it. Are you sure you want to continue?Add Sensor Model:DoneEdit Sensor Model:InfoOverviewSave and add anotherSaveDoneAddNoYesDeleteEditImportSensor TemplatesSensors bulk editSensors bulk edit
Export CSVDoneSave and add anotherSaveDigital input channelsDigital outputAdd DAS {0}Edit DAS {0}Add digital channelDoneEdit Digital ChannelSave and add anotherSaveAdd Digital Input SettingEdit Digital Input Setting
Add SensorMeasure bridge resistanceDoneRead dallas ID	Edit: {0}InfoOverviewSave and add anotherSaveAdd squib settingDoneEdit Squib SettingSave and add anotherSaveClear selectionDoneExportFormatNextOptions
Select allSelectClear model selectionsClear sensor selectionsDoneFormatImportImport another
(multiple)NextOptionsPreviewSelect all modelsSelect all sensorsSelect file(s) Apply Changes to Sensor DatabaseCancelRead IDsMeasure Bridge Resistance(s)Read IDs, Measure BridgesAdd	Bulk editDone	Edit modeNoYes
Delete allDeleteDiagnostics TrackingAddDeleteEditAddDeleteEditEditExport
Export CSVImport
Import CSVRead IDs and Measure Bridges
Save and pushPushReplaceReplace SensorReturnSaveAddDeleteEditTest historySensor DatabaseUsage ReportEdit IDs and Bridge ResistancesReplace sensor(s)SensorsSquibsSensor Test HistoryRunDigital In:HelpHighHigh (V)High g linear accHomeAdditional DetailsAdministrativePerform Sensor ChecksChange test setupCheck Hardware StatusGroups
Channel CodesCustomer DetailsData RecordersDiagnostics
Download DataExport DataHardwareLab DetailsLogoutManage UsersPrepareQuick CheckoutCheck ChannelsRealtime stressRecordReviewRun TestSensor DatabaseSensor Templates
Check TriggerSystem SettingsEngineer DetailsGroup TemplatesTest Setups	View DataIENA keySource port	AvailableIEPE
Not availableNormalizing idsCalibrationsChannelsCustomer detailsEngineer detailsGroupsHardwareLab detailsSensorsTest setupsUsersReading xml8TDC Configuration File (*.ini)|*.ini|All Files (*.*)|*.*ISO#ISO-mme TS 13499 db not found ({0})User specified channel codes	ISO 13499No ISO<01>DataPRO Test Setup XML File (*.xml)|*.xml|TDC Test Setup File (*.tsf)|*.tsf|DataPRO Test Sensor Import File (*.csv)|*.csv|TTS (*.csv, *xml)|*.csv; *.xml|CrashDesigner (*.xml)|*.xml|EQX File (*.e2x)|*.e2x|All Files (*.*)|*.*BrowseData RecordersImport FileInclude All	Clear AllImportImport settingsAdvanced
Basic infoBridge resistanceCal dateCapacityChannelsCommentDetails	Dimension	DirectionEIDEngineering unitsErrors
ExcitationISO object typeGroup name / serial numberPolarityProportionalSensitivitySensor typeBrowseFile%Fine location for {0} not in DB ({1})IdleName'ISO object type could not be determined!Object type not specified for {0}GroupsReading fileSensorCSensor {0} does not appear to have a valid ISO code for object type7Sensor {0} appears to belong to a different object type	Templates Import first use date if presentColumn separatorLocaleOImporting 'Broken' or 'Do Not Use' sensor(s) will remove sensor from following:BrowseEdit Test SetupSelect file(s)BrowseFile(s)FormatCrashSoft 3CSV (*.CSV)DataPRO (*.xml)Equipment exchange (*.e2x)MOD Sensor File (*.mod)Sensor information file (*.sif)TDAS Control Sensor DatabaseTDAS Manager CSV ExportTHF Sensor Database (*.accdb)Sliceware (*.xml)Broken or Do not UseModels
Sensor groupsSensorsTest Setups){0} - Iinvalid Bridge Resistance of [{1}]{0} - Invalid Capacity of [{1}]Has header rowlThe file {0} is already open in another program such as Excel.  Close the file and perform the import again. Clear database before TSF importClearing databaseCreating channelsCreating group templatesCreating groupsCreating sensor modelsCreating test setup(s)Import Sensors3Multiple sensor serial numbers found for sensor {0}"No Group Name found for sensor {0}"No Group Type found for sensor {0}Cancel,Error: Unable to read EQX FileInfo from file7File does not contain valid XML, required by EQX importhError: Invalid version {0}. Only EQX versions less than or equal to {1} are supported for sensor import.,Error: Unable to Parse EQX version from filegError in group {0}. Group has multiple ISO types. Found {1} and {2}. Please fix this error to continue.TError generating Fine Location 3 group {0} for sensor {1} (duplicate iso code found)2the transducer main location {0} is expired - {1}.Failed to load database - {0}3Failed to successfully open THF database connection%Failed connection open using {0}: {1}&Failure while processing THF data: {0}FGroup Name {0} does not match existing group name {1} for ISO type {2}Filter Class {0} is unsupported.Sensor {0} has invalid Fine Location 3 of '??';Sensor {0} will be skipped as no calibration data was foundxFile does not appear to be in TDC CSV format  (no recognized column headers were found).  Please verify file and format.Status(Successfully opened connection using {0}0Sensor {0} will be skipped because of error: {1};The requested channel {0} was not found in the test requestAThe file {0} contains row(s) with the wrong number of entries (s)Default zoneQ{0} Analog sensor(s), {1} Digital inputs, {2} Digital outputs, {3} Squib channelsAWarning: Sensors with conflicting sensor ids (won't be imported)!3Sensors with invalid excitation (won't be imported)Add selectedBrowse	CancelledClearing databaseRError importing sensor {0} - conflicts with an existing sensor of a different typeDoneFile(s)Error importing {0} "{1}"!{0} - invalid excitation of [{1}]B{0} - has invalid sensitivity of [{1}] in it's calibration history
(multiple)%Sensor {0} has no valid calibrations.Select file(s)Global settings entriesSettings not found#Test Setup Default settings entriesSettings importedeThere are changes not imported yet, press OK to navigate away without importing, or Cancel to return [There are unsaved changes, press OK to navigate away from current step, or Cancel to return"Sensor "{0}" not found in databaseTest Setup not completeOReturn without importing groups?  Press OK to exit or cancel to remain on page.Browse<01>Press OK to end the edit sessions and continue with the import, or Cancel to leave the existing edit sessions alone and cancel import.{0} Checkout+Could not generate an ISOCode for entry {0}User defined channelsDescriptionoWarning, there are sensor ids which conflict with sensors already in the sensor db.  Test will not be imported.EIDCreated by GM ISF ImportGroup templatesGroups2The following groups are already open for editing:DASTDC INI Filea{0} - Valid input mode not found in text "{2}" for SensorType {1}. Should contain "N/O" or "N/C".<01>Error, Template {0} referenced an ISO Test Object "{1}" that is not available in import file or database. Add ISO Test Object "{1}" to MME database or DataPRO Custom Channels. Please fix this error to continue.Import FileIncluded?Some customer details were missing a name and were not imported:Some lab details were missing a name and were not importedDSome test engineer details were missing a name and were not importedLocation%Missing sensor(s) and Extra sensor(s)Missing hardware: {0}Missing sensor(s) found.4Multiple events recording mode currently unsupportedNumber	Overwrite<01>The following test setup(s) already exist:
{0}
Press OK to continue and overwrite existing test setups.  Press Cancel to remain on page without overwriting.{0} RunTestSensor templatesSensors
Extra EIDs
Sensors Found3The following sensors are already open for editing:Sensors Missing
Sensors TotalSerialNumberTest Setup NameTest Setups1The following tests are already open for editing:TypeUnsupported recording mode: {0}.Unsupported version: {0}; Current version: {1}Cancelled by userGLength of the field {0} [{1} - size {2}] exceed database limitation {3}WorkingCheckoutRun TestExtra EIDs/sensorsFoundMissing<01>The sensor {0} has an EID, but no EID was found.\r\n\r\nPress OK to clear the EID for {0} and assign the sensor.\r\nPress Cancel to leave the EID unchanged and the sensor unassigned.AnalogAssignDisableEnableRemoveSensor Assignment ErrorcAssign sensor?  ID on the channel will be applied to the sensor and removed from any other sensors.-The CSV file is being used by another process)The CSV file is not for test setup import&The CSV file is not in correct format.Cable MultiplierCapacityCode
Current (amp)Custom CodeDAS ChannelDAS Channels
Delay (ms)
Digital IneThere are changes not imported yet, press OK to navigate away without importing, or Cancel to return 
Duration (ms)EID)The EQX file is not for test setup import.Sensor excitation {0} not supported by channel@DAS have disconnected from the system. Please check connections.ISO channel nameISO (13499) codeQSensor {0} does not support any of the excitation options provided by channel {1}ISensor {0} does not support {2} excitation option provided by channel {1}
Level TriggerLimit durationMode+No DAS connected. Please check connections.PolarityRangeRemaining ChannelsRes. High Tol. (Ω)Res. Low Tol. (Ω)Sensitivity	Sensor SNShow CableMultiplier columnShow Checkout buttonSquibAssignedCheckoutImport FileModePost Trigger (sec)Pre Trigger (sec)
ROI End (sec)ROI Start (sec)Run TestSample Rate (per sec)Test IdTest Length (sec)Test Setup NameType
UnassignedTest Setup not completeUser feedback requiredIn import fileInactiveInclude secondary headerInclude selectedEUEU @ mVmVNoneInitial offset (EU)Initial offset (mV)Battery (V)Battery Voltage StatusDAS	Input (V)Input Voltage StatusStatus
Input voltageClosedHighLowOpenInstanceAPIPathEvents	FrequencyOnInvalid bridge resistance ({0})Invalid sensor category ({0})<01>System grand master is set to PTP1588 but there is also a hardware selected as master.  This is an invalid configuration, please change grand master type or remove the hardware master selection.(Invalid desired sensor range (CAC) ({0})Invalid sensitivity ({0})Invalid excitation ({0})Invalid format {0} - {1}Invalid filter class ({0})Invalid formatInvalid fullscale ({0})>Invalid hardware assignment, rack {0}, module {1}, channel {2}Invalid IRTRACCExponent ({0})Invalid LastCal ({0})!Invalid OffsetToleranceHigh ({0}) Invalid OffsetToleranceLow ({0})5Error: '{0} is not a valid ISO position (channel {1})7Warning: '{0} is not a valid ISO position (channel {1})Invalid recording modeInvalid sensitivity ({0} - {1})Invalid stream mode9Error: '{0}' is not a valid ISO test object (channel {1});Warning: '{0}' is not a valid ISO test object (channel {1}))Invalid Software Zero Equivalent EU ({0})OWhen checked output from sensor is inverted when calculating engineering units.InvertISO 13499 channel nameDon't allow
Don't warnWarnISO 13499 codeIssue connecting to dbEmailContactPhoneLab nameModifiedModified byRecord name
Last ModifiedLast updateWThe export INI settings will be used for upload instead of the test specified settings.Above or below +/-Sample AverageDynamic trigger!Environmental conditional triggergreater than<01>There are invalid level triggers.  These level triggers will not be used.  Press OK to continue or cancel to remain at this step.	less thanLower ({0})between {0} and {1} ({2})'Less than {0} or greater than {1} ({2})Upper ({0})<01>The level trigger for {0} on {1} is no longer valid.  Level trigger settings for sensors are only valid on the hardware they were set up on.<01>Warning: “Enable level-trigger UI” on the System Settings tab is currently unchecked, but one or more test setups being imported have level triggersChannel nameDetailsStatus---Don't warn againAYour license is expired. Please contact DTS to renew the license.License file does not exist.$License is not valid for {0} machine<01>Current license term is over. DataPRO can still be used and is fully functional for test and measurement, and all DTS hardware is supported.

To access full support from DTS, please contact DTS at support.dtsweb.com.5The license file version {0} is not supported anymore7Central SQL Server is not supported by license type {0}cThe current license file is for DataPRO version {0} and not the DataPRO version that you are using.<01>This copy of DataPRO is not yet registered.

DataPRO is fully functional for test and measurement, and all DTS hardware is supported.

To access full support from DTS, please copy the license (.lic) file from the provided installer media to this DataPRO directory, or contact DTS at support.dtsweb.com.UnregisteredLocalDB(localdb)\DataPROInstancedb"Edit session of group {0} was lost#Edit session of sensor {0} was lost!Edit session of test {0} was lost5Edit session of test {0} was terminated by {1} on {2}7Edit session of sensor {0} was terminated by {1} on {2}5Edit session of test {0} was terminated by {1} on {2}Login Login failed.  invalid password.PasswordRemember password	User nameMissing dock stationLowLow (V)Low g linear accMCU tempNAre you sure you want to close DataPRO? Press Yes to close or No to continue. NoYesNoYesOKOKQAre you sure you want to close TSR AIR Go?  Press Yes to close or No to continue.OKzOne or more DTS applications are already running.  acquisition hardware will be unavailable until applications are closed.OKOKDon't remind me againPrimary DB connection lostOK Manufacturer or marker of sensorManufacturerMasking EU meta dataWWarning:  Only {0:0.0000}s of pre-trigger is available in this recording mode and rate.	Max valid
Max value is Building channel listOperation cancelled	ConnectedKSome selected DAS are not connected and some connected DAS are not selected
ConnectingAvailable DAS channelsChannel
Sensors FoundRead IDsStatus
Connection
DAS AvailableData Recorders / DistributorsIDDistributorDoneAbcdefgEthernet Controller+Resistance setting will change more than 5%J (from {0} to {1}) for {2}.{3}{4}use 'OK' to continue or 'Cancel' to skip.FailedFailed to connectGetting configurationReadyNSquib channel values cannot be assigned to non-squib sensors (and vice versa). Incompatible sensors / channels:Measure(Measuring bridge resistance of [{0}] {1}&None of the selected DAS are connectedNo DAS connectedDSelect 'OK' to change the sensor assignment(s) or 'Cancel' to abort.Read ID
ResistanceSLICE Mini DistributorSensorSensors Available*Some of the connected DAS was not selected*Some of the selected DAS are not connected6List of sensors extends beyond end of list of channels4Warning: the following sensors are already assigned.Read IDs, Measure BridgesChannelData Recorders---IDIn Warning PeriodMeasure BridgeMeasurement failed(multiple sensors)No Id foundNot in sensor dbNot yet measuredOut Of Date
ResistanceSerial number (name)No DAS connected-Sensor ID is already in use by another sensorCal dateCal Due DateCapacityDO Delay msDO Duration ms
ExcitationIDIn Warning Period
Last modifiedManufacturerModelModified by---NameNoneOut Of Date
ResistanceSQ Delay msSQ Duration msSQ ModeSensor dataSerial number (name)UnitsWControls whether excitation is measured and compared to expectations during diagnosticsMeasure excitationEControls whether signal to noise ratio is measured during diagnostics
Measure noise
Measured gainMeasured (V)Measurement units requiredMeasuring resistanceChange current test setupChange viewDataPROHelpLogoutOpen Manuals folderCancelCancelContinue
Don't SaveNoOKProceedPush to bothPush to groupsPush to test setupsRetrySave
Save and exitSave and create reportYes	Min valid
Min value is MixedOKNoYesNoYesOKOKOKOKNoYesCancelOKCancelOKCancelOKCancelOK<01>Returning to the home screen will turn off excitations to reduce heating and power consumption. This will invalidate any diagnostics results for this test. Are you sure you want to return to the home screen?NoYesNoYesOKCancelProceedOKCancelProceedRetryNoYesOKNoYesRetryCancelOKCancelContinueDeleteDownloadOKOKCancelContinueOKCancelOKProceedRetryRetry
(modified)Modified ByApplyApplyApplyApplyApplyApplyApply to DAS
Apply to Test	Data FlagDescriptionFilter
EU Multiplier	EU OffsetPreview
Shift T0 (ms)
Module {0}Move sensor id from {0} to {1}Move sensor id7Bridge type {0} not supported on channel for sensor {1}"Channel {0} appears more than onceRemove
UnassignedName '{0}' is not uniqueneedsSLICE IP address(es)TDAS IP address(es)Never overwrite test data`Warning:  A clock sync profile has been set for the test, but no DAS are set as the clock master`The SQL server at {0} is not currently available.  Please check connection and restart.{1}{2}{3}GNo channels are currently set to collect data, please assign a channel.?There is an ROI for download with no DAS with data for that ROINo events were selected.<01>Warning: {0} changes do not automatically take effect in groups and test setups.  To update groups and test setups, either 1) remove and re-add affected channels, or 2) check the “Allow push/pull of sensors” checkbox in the System Settings tab and then use the push button with the sensor selected in the Sensor Database tab.No realtime channels availableThere is no row selectedNo items selected'There is no tests available before {0}.;Every channel with a sensor assigned requries a description<01>DataPRO Test Setup XML File (*.xml)|*.xml|Instrumentation Setup File (*.isf)|*.isf|TDC Test Setup File (*.tsf)|*.tsf|DataPRO Test Sensor Import File (*.csv)|*.csv|TTS (*.csv, *xml)|*.csv; *.xml|CrashDesigner (*.xml)|*.xml|EQX File (*.e2x)|*.e2x|All Files (*.*)|*.*.Channel has a description, but no sensor ({0})IR-Tracc Average over time#IR-Tracc Radius Cal with Cal FactorIR-Tracc Diagnostic zeroedIR-Tracc LegacyIR-Tracc mV for 0 mmCubic polynomial<01>Not all channels have passed level trigger in realtime, are you sure you want to proceed?  Click Proceed to continue or cancel to remain in realtime.(Not implemented - please contact supportgCurrent test setup is not complete and cannot be run, additionally there were no modifications to save.Nothing to exportOKOfflinelIf measuring sensor offset in diagnostics, this is the maximum reading the sensor offset should be at in mV.Offset tolerance highqIf measuring sensor offset in diagnostics, this is the minimum reading in mV that the sensor offset should be at.Offset tolerance lowOffset typeOnboard humidityCal dateDue dateCal intervalCalibration due or overdueNameMessageMissing calibration for {0}
Serial numberGroup2Calibration due or overdue for {1} on channel: {0}
PCM formatPPROS̲ave
Save and exitCancelRefreshDoneSearchSelect,{0} reported error during last auto arm: {1}DoneHomeAdd: {0}	Edit: {0}	Test ID: Test Setup: 	CancelledCancelled by userPassedPossible Channels@Some units do not support post test diagnostics and will not runBatteryDIR/DKREthernet Control Module (ECM)Falcon
G5 (In-dummy)G5 (VDS)InputSLICE micro Base+SLICE nano+PowerPROSLICE Distributor
SLICE Lab DIMSLICE Lab EthernetSLICE 6SLICE 6 AIRSLICE 6 AIR-BR
SLICE6 AIR-TCSLICE 6 DistributorSLICE 6 Distributor 3SLICE 6 Distributor (AIR)SLICE 6 Distributor (In-dummy)SLICE PRO Distributor
SLICE Lab SIM
SLICE Lab TOM
SLICE Pro DIMSLICE Mini Distributor
SLICE Pro SIM
SLICE Pro TOMSettingsSLICE G5SLICE micro
SLICE nano
TDAS PRO RackTSR AIR
Power devicesAAutomatically removes Linear acc, Angular acc, and ARS, from testBattery saver modeWake up and arm on: PowerPROAdditional DetailsChannel code detailsCustomer detailsLab detailsEngineer detailsDeleteExport groupDoneExportAdd
Auto generateCopyDeleteEditExportExportImportImportPush to Test SetupsCustom channelsEdit Custom ChannelsAdd custom channelDoneEdit Custom ChannelSaveExportExport custom channelsImportImport custom channelsNoYesAddCopyDeleteEditExportImportAdd customer detailsDoneEdit Customer DetailsSave and add anotherSaveAddDoneDeleteEdit	Edit modeSave
Add group 
Edit groupExportExport group(s)ImportImport group(s)Add Lab DetailsDoneEdit Lab Details: {0}Save and add anotherSaveAddDeleteEditDoneExportExport SettingsDoneImportImport SettingsAdd test engineer detailsDoneEdit TestEngineer DetailsSave and add anotherSaveAddDoneDeleteEdit	Edit modeSaveAdd group templateDoneChannelsEdit Group Template: {0}InfoModify channel	Move downMove upSaveTemplate ImageAdd Group: {0}SensorsDoneDigital inputsDigital outputsDiscover hardwareEdit Group: {0}HardwareInfo
ParametersPull sensor parametersSave and push to Test SetupsSaveSensor settingsChannelsSquibsClear selectionDoneImportImportInfoOptionsPreview
Select allImportAddDeleteEdit	Add test Auto generate testDASDetectGraphsISOInfoMonitor Test StatusEdit/Add HardwareAdd hardwareAdd Test Setup: {0}AnalogCalculated channelsDoneChannels     componentDASDelete hardware
Digital InDigital Out     dummy / dummy impactor
Edit hardwareEdit Test Setup: {0}Create summary     fixed barrierGraphsAdd/Edit/Replace hardwareDiscover hardwareHardware
ISO exportInfo
Layout reportLevel triggers     linear impactor     mobile barrierGroups
Parameters
     pendulumPull sensor parametersROI x ChannelsReplace hardwareSaveSensors	     sledSquibDynamic groups
     test rig     undefined / otherUpdate Items     vehicle 1     vehicle 2     vehicle 3     vehicle 4     vehicle 5     vehicle 6     vehicle 7     vehicle 8     vehicle 9     ?
Edit test DoneExportExport test setup(s)Analog ChannelsDI ChannelsDO ChannelsDigital Input ChannelsDigital Output Channels	Edit File
Hardware Scan
Level Trigger	Read FileSquib ChannelsSummaryTOM ChannelsImportImport Test SetupsCancelOKSkipNoYesOKCancelOKCancelOKCancelOKCancelOKOKAdd
Auto generateCopyDeleteDoneEditExportHistoryImportMake currentQuick buildRefreshReplace sensorFile
Group nameTagsIncluded	Overwrite	DI Active
DI Default
DI Input modeDisplay name
Full scaleISOCodeInvertIssue
Squib CurrentSquib DelaySquib DurationSquib Fire modeSquib Limit durationSensor serial numberWarningsChannels that will be imported
Empty fileGroups"Channels that will not be imported'Invalid Active value: '{0}' at line {1}"Invalid Current: '{0}' at line {1}(Invalid Default value: '{0}' at line {1} Invalid Delay: '{0}' at line {1}#Invalid Duration: '{0}' at line {1}$Invalid Fire mode: '{0}' at line {1}Invalid full scale capacity%Invalid Input mode: '{0}' at line {1}Invalid Invert)Invalid Limit duration: '{0}' at line {1}$Invalid number of fields at line {0}Sensor not foundMCLR is not currently enabled on SQL server.  Please enable CLR and reconnect.<01>Another SLICE or TSR application is already running.  DataPRO cannot access DAS until the other application is terminated.  Press OK to continue or Cancel to close and focus on the other application.@DataPRO can not run until it has been terminated in session {0}.DataPRO Initiation ErrorDataPRO Licensing Error1Database version {0} is required ({1} was found).kWarning, system appears to not be in high (or max) performance mode.  High performance mode is recommended..Are you sure you want to delete user(s) 
{0}?<01>All Test Setups that Group changes will be pushed to are being edited.{0}Press OK to end the edits and push Group changes to all Test Setups, or Cancel to remain on the page without pushing changes.{0}{1}<01>All Test Setups that Group changes will be pushed to are being edited.  Higher permissions are needed to modify Test Setups in use.{0}{1}<01>Some Test Setups that Group changes will be pushed to are being edited.{0}Press OK to end the edits and push changes to all Test Setups, Skip to only push changes to Test Setups not being edited, or Cancel to remain on the page without pushing changes.{0}{1}<01>Some Test Setups that Group changes will be pushed to are being edited.  Higher permissions are needed to modify Test Setups in use.  Press OK to only push changes to Test Setups not being edited, or Cancel to remain on the page without pushing changes.{0}{1}OAre you sure you want to push Group changes to the following test setups?{0}{1}(locked)nGroup is not modified, and no Test Setups are out of date, so pushing to Test Setups would not have any effect^{0} changes are not automatically pushed to groups and test setups.  Use push to push changes.
AttributesChannelDoneFailedGroupHardwareImporting Test Setup...FDAS configuration is missing. Click 'Query selected' button to update.No DAS connectedNo Test Setup was builtK{0} DAS will be interrogated before building a Test Setup.  OK to continue?$Querying Test Setups on selected DASSettings'Test Setup '{0}' was successfully builtWaiting&Click on a DAS to build the Test SetupWorkingQuick CheckoutQuick CheckoutChannelsQuick checkoutTest setup name is invalidDoneData RecordersWaitingManual assignmentsQuery failed	Run checkQuery selectedMaxRS-232RS-422RackJCan be used when setting a group of sensors to low, medium, or high ranges
Range highICan be used when setting a group of sensors to low, medium or high ranges	Range lowJCan be used when setting a group of sensors to low, medium, or high rangesRange medium!(Read EIDs is currently disabled)ReadyReady to stream+Logging only available in single chart modeNextPrevAllAAFAvChart Width (s)ChartsCollapse Osc Channel Info
Hide settingsHi
LOGGING ONLowMxMnMax draw delayMedMin draw delayNext {0} graph(s)
Polarity: Polling intervalPrev {0} graph(s)Restart realtimeSample rateSettingsShow Osc Channel Info
Show settingsStart signal<01>There was an error in creating/keeping the realtime connection. Check necessary realtime, network, and clock settings and click Retry to try again. Click Proceed to otherwise continue.Trigger signaloThe following DAS have disconnected from the system, aborting the test is recommended. Please check connectionsBUnits have changed, please check hardware before resuming realtimeADCAdd	Zero timeuAre you sure you want to cancel this test (you may leave this page without cancelling by clicking the 'Back' button)?Arm
Arm checklistStart MonitoringAutoZeroAutomatic mode status: 
Basic infoDoneChangeCloseChangeStop MonitoringDiagnosticsChangeDisarm
(Dis)Auto-armStop StreamingDownload all
Download dataChangeDownload ROIEUEdit Group: {0}DoneSaveEdit Sensor: {0}DoneSaveExport
Export all
Export ROI
Test SetupFinish
FullscreenHardwareHomeRealtime logging	Low power
Meter modemVMeasure squib resistances	Next stepNext xOsc modePause (Automatic mode)Pause (Automatic mode)Paused by systemPaused by userPost test diagnostics	Prev stepPrev xQuick CheckoutRealtimeChangeShow recovery controlsHide recovery controlsReplace sensorDoneCheck sensor IDResume (Automatic mode)Retry current stepRun
Run (Channel)	Run (DAS)Run (group)RunningSave and runSave
Scan HardwareSelectSnapshotStart Record
Check triggerChangeRun testSoftware triggerUpload data
Verify all
Verify ROIView allViewView ROIView reportView summaryWaiting
Check wake upZeroHybrid recorder multiple-eventsActiveCircular bufferCircular and streamCircular buffer + UARTContinuous recorderContinuous recorder + UARTHybrid and streamHybrid recorderIntervalMultiple-event activeMultiple-event circular buffer,Circular buffer and stream (multiple events)%Multiple-event circular buffer + UART#Hybrid and stream (multiple events)Multiple-event hybrid recorderActive RAM (multiple events)Multiple-event recorder%Recorder and stream (multiple events)Multiple-event recorder + UART
Active RAMRecord on bootRecord on boot + UARTRecorderRecorder and streamRecorder + UART	Streaming	Scheduled	StreamingFSOFTWARE\\Microsoft\\Microsoft SQL Server Local DB\\Installed Versions
Copy & RenameRenaming
Rename failedRename finished,Modify fields, then click on 'Rename' buttonTest IdTest Id already existsTest Id is required	Test NameTest Setup already existsTest Setup is requiredReplace SensorAllAnalogCalDateCapacity
Comparison
Digital inDigital outFailed - {0}Groups containing sensorMakerModel<01>The following test setup(s) contain multiple copies of the sensor being replaced.  The new sensor has an id and can't be placed into those test setup(s). ({0})NewESome hardare channels are not compatible with new sensor (BridgeType)Original.Are you sure you want to replace {0} with {1}?SquibSearch!Select sensor to replace {0} withSelect sensor to replace withSelect sensor to replacerWarning, new sensor already appears in the following test setup(s) {0}.  Press OK to continue or cancel to return.Test Setups containing sensorUnitsDoneKSome hardware channels are not compatible with new sensor (Squib Fire Mode)FSome hardware channels are not compatible with new sensor (Excitation)Waiting for user selectionWorkingPage {0}/{1}	RequestedAllAnalogIEPE detection({0} is not supported on {1} channel {2}.0No calibration records found for {1}({2}) on {0}-Sensors can only be assigned to open channelsCancelChannelChannel number0Sensor {0} not found in database for channel {1}iChannels highlighted purple indicate the sensor EID found does not match the hardware channel assignment.MChannels highlighted green have been assigned via EID or hardware assignment.aChannels highlighted yellow indicate the sensor was manually assigned using this Navigation Step.{Channels highlighted orange indicate the sensor EID was not found and the hardware channel assignment will be used instead.{0} channels to resolveChecking for undownloaded dataConflict with {0}Continue
Digital in?Digital input mode {0} is not supported by hardware channel {1}Digital out.Sensor not supported on Digital Output channelDone. All sensors identified..Incomplete, {0} channel(s) are out of position9Incomplete. {0} channel(s) require manual identification.({0} is not supported on {1} channel {2}.2No supported excitations found for {1}({2}) on {0}Extra Sensor IdsHardware ChannelsIdleIn Use<01>Failed: Invalid duration for digital output channel. Consider updating digital output channel value in Test Setup and re-run the test.IssueManually AssignedManually Resolved ChannelsManually unassigned channelNoDNot all channels have been found, are you sure you want to continue?;Not all DAS is included, are you sure you want to continue?OpenOut of position sensorsChannel not assignedHardware not foundCancelContinue<01>Post-test diagnostics has been selected, but will not be run because no channels in test apply. Are you sure you want to continue?Querying configuration/Error, please check connection to units.  [{0}]'Timed out waiting for response from DASChecking sensor ID Query config timeout SLICE (sec)"Query download timeout SLICE (sec))Test setup requires sensor id to be found[Warning - {0} has sensors assigned with EIDs but no EID detection will be done on this das.Sensor ID not foundCSensor ({1}) was found, but on hardware not included in group ({0}),Hardware channel can not support sensor typeSquib(Squib fire mode {0} not supported by {1}StatusQuery config timeout TDAS (sec)!Query download timeout TDAS (sec)^Failed: Timed out reading configuration from devices.  Consider increasing QueryConfig timeoutUnresolved ChannelsChannelDASSensor:Are you sure you want to restore all settings to defaults?<01>Apply Line Fit will alter ADC data for this channel.  If you have to revert your changes, data will be restored to original and all other changes will be reverted.<01>Apply to DAS will shift T=0 on channels ONLY in this DAS, but not all channels in this test.  If you have to revert your changes, data will be restored to original files and all other changes will be reverted.:Apply to Test will shift T=0 on ALL channels in this test."Are you sure you want to continue?CloseBroken WireNoneNormalOther	SaturatedZero Crossing ErrorInvalid sensitivity<01>All channels in this test will be restored to their original values, and any calculated channels will be removed.  Click OK to proceed or Cancel to preserve any modifications.Restore original valuesSensitivityApplyCancelNextBrowseCopy & TrimExport
Copy & RenameExportFormatOptionsExport'Generate power spectral density reportsADC	Add graphCancelOKCancelOKCancelOK
Auto rangeDoneChannelDisable filtersEU	Eng units	Add graphDoneSave and add anotherSave and edit anotherSave asSave
Edit GraphViewEnable filtersFixed ValueFilterModify channelSave to PDFAdd CalculationCancelSave	Add graphBrowse
Edit GraphGenerate PSD ReportsDoneNext 1 graph(s)Prev 1 graph(s)Select-----------------------------	View testViewPan% full scale% full scale% full scalePoint
Reset zoomCancelOKZoommV)Rotational pots must be different sourcesENot all steps are complete. Are you sure you want to leave this page?6Destructive test setting must be set before continuingNoYes{0} - Edit Group{0} - Edit SensorDAt least one sensor in the Test Setup is marked as InspectBeforeUse.Test Setup not found {0}\Current test setup isn't ready to be run on this tab.  Please select a different test setup.<01>A valid Test Setup is required to proceed. Please select a valid Test Setup or create a new Test Setup using the Test Setup tab.
Enter test idNo data is present to download."Please place all TOMs in Arm Mode.#Please place all TOMs in Safe Mode.dWARNING!  All TOMs are not in the SAFE position.  Click Retry to check again or Proceed to continue.]Path to test data would be too long, Use a shorter test id and/or test setup name if possible{0} - Replace Sensor<01>Warning:  Ignore shorted trigger is on and there is a TOM attached.  This could result in system triggering and firing squibs on arm.<01>One or more problems discovered during checklist, are you sure you want to continue the test?  Press OK to continue the test or cancel to remain on checklist.jAre you sure you want to skip the remaining graphs?  Press OK to continue or cancel to remain on this step*Are you sure you want to skip this export?Waiting for user selectionS1S1.5S6S6AS6A-BRS6DBS6DB3SLDSLESLICE6 AIR connectionsSLICE6 AIR ConnectorFThe following devices need to be reconfigured in the DataRecorders tabSLICE 6 DistributorSLICE 6 distributor 3SLICE 6 Distributor (AIR)SLICE 6 Distributor (In-dummy)SLICE6 AIR sensor interfaceSLICE6 sensor interfaceSLICE 6 AIRSLICE 6 AIR-BRSLICE 6SLICE Bridge connectionsSLICE PRO Lab TOMSLICE PRO DistributorSLICE Lab Ethernet
SLICE PRO DIM
SLICE PRO SIMSLICE PRO Lab DIMSLICE PRO Lab SIM
SLICE PRO TOMSLICE PRO sensor interfaceSLSSLTSPDSPDBSPSSPT(same as download folder)'Sample rate for test is not available: \There are unsaved changes, press OK to save changes or Cancel to continue on without saving.(saved)Scanning for power lossScanning for peaks and troughsArming is no longer possible.,Remaining time until arming is not possible:Screenshot capturedSQL Server ScriptsSearch: Select a sensor to replace withSelect a sensor to replaceSensitivity can not be zero
Add LinearDAdded Linear Sensitivity has the same ISO Code as the parent sensor.At capacityAvg window end (ms)Avg window start (ms)
Avg over timeCal dateExponentCal-Factor (mm/Vlin)Last Calibration DateCalibration Factor [mm/V]Calibration historyNoteCalibration Interval (Days)Calibration note
Capacity (EU)DetailsDocument(s)Has been used since calibration<01>Current calibration is incompatible with IEPE type.  IEPE supports only linear non  proportional sensor calibrations.  The current calibration will be reset with a blank linear calibration.$Intercept + CalFactor * (V^Exponent)"3D/2D IR-TRACC Zero Pos Output (V)Initial Offset	InterceptInvalid calibration dateKInvalid calibration interval (Interval value should be between {0} and {1})6Zero Average Start must be less than Zero Average StopSensitivity of 0 is invalidISO CodeLinear Sensitivity DetailsLinearization exponentmethodModify date
Non-LinearNon-Linear Sensitivity DetailsNon-Linear Format
Absolute zeroOr#Based on output at sensor max rangeSlope (mm/V)Proportional to ExcitationIntercept (mm)Record/Are you sure you want to remove this cal entry?0Are you sure you want to remove this cal record?
Remove Linear
Remove offset* s^1 + * s^2 +* s^3 + SensitivitySensitivity DetailsSensitivity UnitsSlope
Software zero Sensitivity change tolerance (%)Document {0} failed to load.Diagnostic levelVoltage linearization exponentValid for excitationView	End (sec)Start (sec)Zero-Position Intercept [mm]
mV at 0 mmmV for 0 mmSensor	< includeRemove >
Remove all >>4Slope={0:0.0000}, Intercept={1:0.00}, Exp={2:0.0000}2Maximum value in engineering units sensor can readCapacityTDC polynomial not supported<01>User code, User channel name, ISO (13499) code, ISO channel name (the preceding only if blank), Capacity, Polarity, Default filter, Software zero method (and Start/End), and/or Initial offset<01>Sensor calibration date is older than the most recent calibration date.  Would you like to remove calibrations with a more recent calibration date?  Press "Yes" to remove newer calibratrion date entries or "No" to leave the existing entries in place.  Press "Cancel" to cancel operation.gThe following group(s) are currently being modified by other users.  These groups will not be modified.gThe following sensor(s) are currently being modified by other users.  These sensors will not be pushed:fThe following tests(s) are currently being modified by other users.  These tests will not be modified.'Input mode, default value, active value%Output mode, limit duration, durationSensors with calibrations due7Are you sure you want to push parameters for sensor(s):Sensors5Firing mode, delay, duration, limit duration, currentCal dateCapacityName
ExcitationID
Last modifiedManufacturerModelModified by
ResistanceSensitivity
Serial number{0} Axis {1}UnitsCalibration dateActionAddFoundFoundKeep (no action)!Keep, hardware assignment updatedKeepChannelFoundIDIKeep, updating hardware as a conflicting id was found on assigned channelLocationSensor SN (sensor name)Import sensor modelsOverwrite existing sensorsComma separated value file(s)CSVEquipment exchange fileEQX"ISO multimedia data exchange filesISOSensor information file(s)SIFActive ValueAxis numberBridge leg modeBridge resistanceBridge type
Bypass filterCal intervalCal dateCal due dateCalibration signalCapacityCheck offsetName
Coupling modeCreated
Default ValuePhysical dimension	DirectionExcitation voltageExternal shunt resistanceFilter classID
Initial EUInitial Offset
Absolute zeroAverage over timeDiagnostic levelEUNonemVDescriptionInternal shunt resistanceInvertIs proportionalISO code
Last modified
Local onlyManufacturerMeasurement unitModelModified by
Non linearNumber of axesOffset tolerance (high)Offset tolerance (low)OnlineDescriptionPolarityPolynomial styleRange (med)Range (high)Range (low)
Remove offsetSensor resistance in ΩSensor category
Serial numberShuntStatus
Times usedUnipolaroWhen unchecked sensor is bipolar and extends both directions around 0.  Bipolar is the most common sensor type.User serial numberUser value1User value2User value3VersionZero method offsetZero method	ZeroPointESensor Filter selection and the ISO Code filter encoding don't match.aSensor(s) have been changed by another user.  No changes can be saved until sensors are reloaded.]Sensor has been deleted by another user.  No changes can be saved until sensors are reloaded.ISO Name required.ISO Code required.ChannelDASGroupCh. #Sensor name	Sensor Id
Sensor serialStatus*Sensor {0} is being edited by {1} on {2}. <01>Sensor {0} is being edited by {1} on {2}.  Press OK to take control of sensor or cancel to remain on the page without editing.  Taking control of the sensor will end the edit by {1}.*Sensor {0} is open for edit by {1} on {2}.All123456CapacityName	DimensionEngineering unitsNom. bridge resistance (ω)Nominal excitationMixed (mV/EU) or (mV/V/EU)Nom. sensitivity (mV/EU)Nom. sensitvity (mV/V/EU)PolarityProportional to excitationSensor typeSettingSupported excitation(s)	Direction)Manufacturer model name or type of sensorModel(new)(new)(None)All (sensor models)None (sensor models)AddBridge typeSensor max range (EU)	Dimension
ExcitationManufacturerUnitsModelModelSensorAssembly#Based on output at sensor max rangeBrokenCal dateCal due dateCalibration interval (days)Sensor max range (EU)Channel typeNameDO delay msDO duration msDefault filter
Digital input(Digital Input Setting)Digital output(Digital Output Setting)(Digital Setting)	Dimension
Do not useExcitation (V)	Sensor IdIn warning periodIncludedInitial offset
Last modifiedLinear sensitivityManufacturer
Maximum UsageModelModified by---None
Non linearNon linear sensitivityOut of datePolarityProportional to excitation
Range high	Range lowRange medium
Remove offsetResistance (Ω)
DAS DependentSQ delay msSQ duration msSQ modeSensitivity
Sensor offsetSensor type
Serial numberShuntSoftware zero methodSquib(Squib Setting)UnitsUsage CountSensor Test HistoryAAF (hz)Cal dateCapacityHardwareISO channel nameISO codeRangeSamples per secondSensitivity
Serial numberUser channel name	User codeSensor type cannot be changed.Report fileBrowse*XML File (*.xml)|*.xml|All Files (*.*)|*.*	CancelledDoneKNo sensors have been selected.  Please select sensors to include in report./The sensor usage report file must be specified.FailedWaitingWorkingUser Name required.User Code required.Sensor Voltage (V)Sensors
All (sensors)	AvailableIncludedAffected group(s): Affected test setup(s): CThe following group(s) are currently being modified by other users:DThe following sensor(s) are currently being modified by other users:HThe following test setup(s) are currently being modified by other users:<01>Do you want to take control?  Select yes to start pushing parameters and end the modify session by other users.  Click No to leave other users modify sessions active and to push settings except for these items.
(multiple)<01>Pressing OK will get edit control over the sensors listed and end the edit sessions of the users currently editing the sensors.  Pressing cancel will skip the sensors listed and keep the the existing edit sessions in place.None (sensors)Current channel #Original channel #Sensor	Sensor IDgSensitivity units were corrected on the following sensors using proportional to excitation information:DThere was a problem accessing DAS, aborting the test is recommended.#Setting page encountered a problem Show Sensor/Channel user values	EmulationExternalInternalNone	EmulationExternalInternalNoneData end (sec):Data start (sec):Download path: Sample rate (sps):SLICE 6 AIR Ethernet RecorderSLICE PRO CAN FDNFile '{0}' has a space at front or end of the file name and can not be loaded.SqlLocalDB.exe$SQL Server LocalDb is not installed.SqlUserInstance.dllSQUIBNONEAlternating current dischargeCapacitor dischargeConstant current dischargeNoneChannelCh #DASDelayDurationFailedFire Test StatusGroup	High (Ω)Low (Ω)*Not tested (put safe switch into ARM mode)Resistance (Ω)SettingStatusPassed
Squib setting
Delay (ms)
Duration (ms)	Fire modeISO codeDescriptionSquib Settingsstart DataPROInstanceStart shorted: Start (Automatic mode)Starting check channelsStarting region downloadStarting run testState/Digital outputs (only applies to trigger check)FailedOffOnDetails#Waiting for units to finish writingPreparing data memoryPreparing for armingUpdating DAS ConfigurationCreating calculated channels	Rebootingstop DataPROInstance	Stream in
stream output
Stream out
Stream outputStreaming not available-Remove backslashes from sensor serial numbersAdded: /- Checkout mode -     {0}     - Checkout mode -	Removed: Summary10 V2 V5 VSystem grand master typehSystem settings currently open by {0} on {1}.  Press OK to end edit session of {0}, or Cancel to return.8There was an adjustment to the T0 on the following DAS: 
TDAS Lab RackCulture of import file[None][Test Setup Name][Time Stamp]Minor per major
Message IdSubframe Id
TMATS portCurrent (A)Amps
Delay (ms)Delay
Duration (ms)Duration---Output Peak (A)Output Peak (V)Expected delay (ms)Expected duration (ms)
Threshold (A)AmpsVoltage (V)Volts
Voltage input	Angular 1	Angular 2	Angular 3
AtmosphereHigh g Linear 1High g Linear 2High g Linear 3HumidityLow g Linear 1Low g Linear 2Low g Linear 3TemperatureaTSRAIR Go can not launch on the current database.  Please contact DTS support to update database.
TSR AIR GoArmCurrent time (UTC)DownloadEvent length(s)Export DataGo back to DashboardHelp
Interval(min)
Level triggerMaster Clock Input Source4Master Clock Output Source/ Slave Clock Input SourceMixedMultipleNumber of eventsPost-trigger(s)Recording ModeSPSSchedule start time (UTC)Recording Settings
System StatusTrigger	View Data@Test contains TSR AIR ARS channels at ranges no longer supportedBTest contains TSR AIR low g channels at ranges no longer supportedFThe following devices need to be reconfigured in the DataRecorders tabTSR AIRHeaderName
Display orderVisibleWidth---	Env Temp1	Env Temp2	Env Temp3	Env Temp4Temperature, humidity, pressureDASStatusSensor Temperature in Degrees Ctest
Test channels
Last modifiedLast modified byRecord nameTest Engineer NameComma separated values
DIAdem DATISO 13499 mme 1.6Somat export
Test log fileTab separated valueTTSArm timeBrowseNo usable test setup to exportCould not export test setupDescriptionDestructiveExportFileName%Please select a filepath to export toTest Id
Test setup1Test incomplete, cannot proceed to check channels+Test incomplete, cannot proceed to run test-Apply "Shift T₀" modifications to Test onlyDisplay name'Non-ISO group templates can't be editedNumber of Channels{0} channels, {1} required%Could not create system Non-ISO Group-Warning: Are you sure you want to delete {0}?DescriptionAssociated GroupsModifiedModified byNameParent TemplateTypeNumber of Zones"Channel {0} has no sensor assigned{0} channels, {1} requiredModifiedDescription<Could not get unit conversions for sensor {0} on channel {1}/Group not supported by current ISOSupport LevelCompleteModified By+ {0} more error(s)	New GroupNo hardware is assigned3Group template no longer exists, group is not validANot enough analog channels to support all analog sensors in groupPNot enough digital input channels to support all digital input settings in groupRNot enough digital output channels to support all digital output settings in group@Not enough SQUIB channels to support all squib settings in groupNumber of Channels
Number of DASParent?Sensor {0} for channel {1} does not have any valid calibrations4Sensor {0} for channel {1} was not found in databaseNameISO SupportTemplate	Test pageAutoArm diagnostics delay (ms)AutoArm diagnostics levelcTest setup has been changed by another user.  No changes can be saved until test setup is reloaded.^Test setup has been changed by another user.  Test cannot be run until test setup is reloaded.mPlease refresh the list. Test Setup doesn't appear in the database and may have been deleted by another user:,Warning: multiple graphs have the same name "Warning: graph {0} has no channelsEError:  Sensor average over time window start is after end for sensor<01>Test setup {0} is being edited by {1} on {2}.  Press OK to take control of test setup or cancel to remain on the page without editing.  Taking control of the test setup will end the edit by {1}.'test {0} is being edited by {1} on {2}.<01>Pressing OK will get edit control over the tests listed and end the edit sessions of the users currently editing the tests.  Pressing cancel will skip the tests listed and keep the the existing edit sessions in place.abovebelowabove or belowDError:  A pretrigger or posttrigger is required for data collection.Test setup not found1Test setup must be saved before report is createdTest Setup: Cal DateCal Due DateCapacityChannel nameDO Delay msDO Duration ms
ExcitationChannel filter classGroupISO codeIn Warning PeriodJCODENoneOut Of DatePolarityPositionRange (CAC)SQ Delay msSQ Duration msSQ Limit DurationSQ ModeSensitivity	Sensor IdSensor name
Serial numberGroupUnitsZero Method"Test Setup validation error in {0}Allow advanced recording modesAllow calculated channels6Allow data collection with a sensor id out of positionAllow TSR AIR recording modesEnable level-trigger UI0Automatically add arm checklist when adding TOMsValid sample ratesChannels<Export dual sensitivity sensors in the same file (CSV, XLSX)Common status lineControl surface portDefault recording modeDefault Test ID PrefixDefault Test ID SuffixDerive ROI from AllDescription.Don't run test if sensor is out of calibration
Download modeAdd HardwareADCUse actual range for ISO-MMEFilteredFiltered EUFormatmV#(no options for this export format)
Unfiltered
Unfiltered EUG5GraphsISO Support2Import sample rates and AAF settings from TDAS.ini Include Group name in ISO exportReady&ISO channel/sensor compatibility level9Keep ROI and Multiple Events downloads within test folderModifiedModified byMAX AAFMax parallel TDAS downloadsNameJSingle event data capture. This method does not support multi-event modes.RTC Schedule event duration:RTC Schedule start time (UTC):Current time (UTC):Recording modeSLICE AAF rates Number of ADC samples per packetTDAS AAF ratesBrowseTDAS PROTemperature time formatTemperature value formatPrefill test id with setup nameTest ID Prefix/Suffix Values#Timed interval event duration (ms): Timed interval number of events:everyTimed interval frequency:Timed interval unit:Trigger check after Real-timeTrigger method:!Use circular buffer trigger checkUse flat folder structure/Use Test Setup for Test ID header in CSV export8Display UTC time in CSV exports as seconds from 1/1/1970Use UTC time in CSV exports-Warn if test is cancelled without data export+Warn on missing or failed battery (default)-Warn when a sensor with ID is out of positionNCan only edit test setups with the same ISO Support level currently configuredCheck ChannelsRun TestNo export formats selected<01>Error: Test uses recording modes which are not currently available.  Switch to a user with access to recording mode {0} or modify the allowable recording modes in Test setup settings step of System Settings.<01>Error:  Test is set up for a non TSR AIR streaming mode.  Uncheck "Set das to streaming" and ensure a TSR AIR streaming mode is selected and then check "Set das to streaming" again.<01>Error: Test uses TSR AIR recording modes which are not currently available.  Switch to TSRAirUser or enable 'Allow TSR AIR recording modes' in Test setup defaults section of System settings.<01>Error:  Test includes a TSR AIR but "Allow TSR AIR recording modes" is not selected for the user in System settings -> Test setup defaultsMError: Calculated channel {0} contains DAS recording at multiple sample rates/Not all calculated channels have a unique name.,Not all calculated channels have a name set.-Error: Channel {0} has no squib fire mode set]Channel "{0}" (hardware channel "{1}") has not been assigned to an enabled Region of InterestCircular bufferCircular Buffer + UART,Squib fire delay can not be less than 0.25ms-ISOCode '{0}' is present on multiple channels(none)Quick data collectionwError: At least one DAS selected to use GPS for clock sync doesn't have a UART  settings channel configured in the test<01>Error: GPS via UART only for clock sync has too much drift. Please select GPS + 1PPS for Clock Master Input Clock Type and physically set up your device(s) accordingly<01>Change ‘Clock master default profile’ (System Settings > Test setup settings > Clock sync options) as well to avoid this error in new test setups9Test includes hardware which is no longer available ({0})6DAS {0} can only record for approximately {1} seconds.HSensor '{0}' on channel '{1}' has output that exceeds post-trigger time.@Insufficient post trigger time to cover squib delay and duration#Error: Acceleration X invalid ({0})#Error: Acceleration Y invalid ({0})#Error: Acceleration Z invalid ({0})1Error: HIC requires 3 acceleration channels ({0})+Test setup contains invalid dynamic groups..Test setup contains invalid sensor group ({0})1Invalid sensitivity for sensor {1} on channel {0}"Invalid units for {0}, channel {1}+ {0} more error(s)VError: Calculated channel {0} is set to display in realtime, but contains multiple DASMultiple recording periodsMultiple (see below)%There are no DAS included in the test)There are no sensors included in the test4Region of interest "{0}" has no channels to download,There are multiple ROI with the same suffix.RecorderRecorder + UART-{0:0.00}s Pre-trigger, {1:0.00}s Post-trigger{0:N0} samples per second)Squib fire duration can not exceed 25.5ms.Squib fire duration can not 
LaboratoryNumber of Channels
ROI Suffix
Test EngineerTest Setup NameTimeTest HistoryIR-TRACCR. Pot YR. Pot ZDASX-axis DegreesY-axis DegreesZ-axis DegreesStatus	System IDSystem LocationCancelJThe list of {0} tests modified on or before {1} has been generated in {2}.ToolstotalTrigger shorted: ETrigger signal for {0} is shorted.  Please check trigger signal line.UART<01>There are no network interfaces which can addresss {0} ({1}).  Please contact support or check manuals for help on configuring your network.#UDP discovery currently unavailableMUnable to delete group {0} - it may have already been deleted by another user}Unable able to set clock sync for {1}.  Firmware may not support this type of clock sync.  Error reported by firmware is: {0}
UnassignedoWhen unchecked sensors are bipolar, so extended both directions around 0.  Bipolar sensors are the most common.UnipolarEUUnits requiredUnknown DAS Type	<unknown>Done updating Test SetupsUpdating attributesUpdating Test SetupsBrowseaAre you sure you want to skip the upload step?  Press OK to skip or cancel to cancel upload step.	CancelledDoneFailedFile(s)Binary all dataDataPRO test setupExportsISFJCLLog archiveLogsRDF	RDF (All)	RDF (ROI)Binary ROI dataReports
Test setupsFiles in the following directory will be overwritten if you continue.  Use OK to continue or cancel to abort.{1}{0}and {0} more file(s)StatusFailedFailed (file not found)---SkippedSuccessDetailsUpload location	Uploading`Files already exist in the following locations.  Press OK to overwrite or cancel to abort. 
{0}
User canceledDASGroupSensor
Test Setup/Use dropdown lists for test object and position'Use dynamic groups with CSV, EQX import9Use legacy TDAS Control TOM software filter class setting2Use legacy TDAS Control software filter adjustmentUser cannot be deletedUser channel name	User codeOperation denied"User specific meta data for sensorUser part numberUser part number
User Tag(s): User value 1User value 2User value 3Database IdDisplay nameModifiedModified byRole	User nameUsers
Value (EU)
Value (mV)error in channel: {0}0error loading one or more channels in graph: {0}No channels in graph(Calculated)!data was not generated by DataPRO1 is too large to be displayed by the data viewer.<No name provided>Voltage measurementGoodHighLowUsed---Waiting for user inputDuration (hh:mm:ss)Magnet wake timeout (sec)Motion wake timeout (sec)
Session start,Warn and verify when deleting group channelsWarningSWarning:  The following DAS will not be loaded as they contain an unknown DAS type:WarningIWarning:  Angular rate level trigger enabled but no axis has been enabled<01>Warning:  Ignore shorted trigger is on and there is a TOM included in the test.  This could result in system triggering and firing squibs on arm.<01>Warning, channel {0} is using EU@mV but has a software zeroing method set.  The software zeroing will change the EU output which might not be intended when using EU@mV+Warning, failed to store test history in db>Warning, failed to retrieve CAN configuration from [{0}] ({1})CWarning:  High g level trigger enabled but no axis has been enabledPWarning:  Humidity level trigger 'above' value is greater or equal 'below' value1Warning: Offset type '{0}' appears multiple times5Warning: EU at mV is only used on linear calibrations9Warning: No offset type set for at least one offset entryeThe deviation {0}% is greater than {1}% allowed. please inspect the sensor and the sensitivity value.(Warning:  Angular sample rate is invalid'Warning:  High g sample rate is invalid&Warning:  Low g sample rate is invalidfWarning: RTC schedule trigger is a single-event data capture, but multi-event recording mode selected.0Warning: Session duration must be greater than 01Warning: Session start time must be in the future8Warning: Temperature, humidity, pressure rate is invalid6Warning: Level trigger enabled but no trigger selectedBWarning:  Low g level trigger enabled but no axis has been enabled<01>Warning, not all channels expected were downloaded.  If this is unexpected please contact technical support before arming or running diagnostics again.
Expected: {0}, Actual: {1}PWarning:  Pressure level trigger 'above' value is greater or equal 'below' valueYWarning:  Stream and record should not be used with sample rates greater than 20,000 sps.SWarning:  Temperature level trigger 'above' value is greater or equal 'below' valuePWarning:  The following DAS do not support the test event line completion modes:mWarning:  The following units were detected with Voltage Insertion on and any collected data may be affected._Warning:  The following distributor(s) have RTC batteries that were disconnected or lost power:\Warning:  The following distributor(s) have RTC batteries that are near their expected life:<01>Hard drive parameters may need to be adjusted to run SQL Server on Windows 11.  Press yes to get more information on the web.  There is also more information available in the manual under "Windows 11 Support"Average over timeUse absolute zeroUse diagnostics zeroSource Voltage