DP44/DataPRO_sql/dbo.sp_SensorsAnalogUpdateAll.StoredProcedure.sql

<EFBFBD><EFBFBD>IF  EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[sp_SensorsAnalogUpdateAll]') AND type in (N'P', N'PC'))
DROP PROCEDURE [dbo].[sp_SensorsAnalogUpdateAll]
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
IF NOT EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[sp_SensorsAnalogUpdateAll]') AND type in (N'P', N'PC'))
BEGIN
EXEC dbo.sp_executesql @statement = N'CREATE PROCEDURE [dbo].[sp_SensorsAnalogUpdateAll] AS' 
END
GO
ALTER PROCEDURE [dbo].[sp_SensorsAnalogUpdateAll]
		@sensors						xml = null
		,@errorNumber					int				output
		,@errorMessage					nvarchar(250)	output
AS
BEGIN
	set @errorNumber = 0 
	set @errorMessage = space(0)

	if(@sensors is null)
	begin 
		RAISERROR(15600,-1,-1, 'sp_SensorsAnalogUpdateAll') /* Error 1560 - An invalid parameter or option was specified for procedure*/
	end
	else
	begin
		SET NOCOUNT ON;
		declare @SensorsAnalog Table(
				[SerialNumber] [nvarchar](50) NOT NULL,
				[UserSerialNumber] [nvarchar](50) NOT NULL,
				[Model] [nvarchar](50) NULL,
				[Manufacturer] [nvarchar](50) NULL,
				[Status] [nvarchar](50) NOT NULL,
				[MeasurementUnit] [nvarchar](50) NOT NULL,
				[OffsetToleranceLow] [float] NOT NULL,
				[OffsetToleranceHigh] [float] NOT NULL,
				[eId] [nvarchar](50) NOT NULL,
				[Capacity] [float] NOT NULL,
				[Comment] [nvarchar](50) NOT NULL,
				[BridgeType] [smallint] NOT NULL,
				[BridgeLegMode] [smallint] NOT NULL,
				[Shunt] [smallint] NOT NULL,
				[Invert] [bit] NOT NULL,
				[UserValue1] [nvarchar](50) NULL,
				[UserValue2] [nvarchar](50) NULL,
				[UserValue3] [nvarchar](50) NULL,
				[FilterClass] [nvarchar](50) NOT NULL,
				[BridgeResistance] [float] NOT NULL,
				[IsoCode] [nvarchar](50) NOT NULL,
				[CheckOffset] [bit] NOT NULL,
				[SupportedExcitation] [nvarchar](50) NOT NULL,
				[InitialEU] [float] NULL,
				[CalInterval] [int] NOT NULL,
				[CalibrationSignal] [bit] NOT NULL,
				[InternalShuntResistance] [float] NOT NULL,
				[ExternalShuntResistance] [float] NOT NULL,
				[UniPolar] [bit] NOT NULL,
				[RangeLow] [float] NOT NULL,
				[RangeAve] [float] NOT NULL,
				[RangeHigh] [float] NOT NULL,
				[Created] [datetime] NOT NULL,
				[TimesUsed] [bigint] NOT NULL,
				[SensorCategory] [int] NOT NULL,
				[BypassFilter] [bit] NOT NULL,
				[CouplingMode] [smallint] NOT NULL,
				[Version] [int] NOT NULL,
				[LastModified] [datetime] NOT NULL,
				[ModifiedBy] [nvarchar](50) NOT NULL,
				[LocalOnly] [bit] NOT NULL,
				[AxisNumber] [smallint] NOT NULL,
				[NumberOfAxes] [smallint] NOT NULL,
				[UserTags] [varbinary](max) NULL,
				[DoNotUse] [bit] DEFAULT ((0)),
				[Broken] [bit] DEFAULT ((0)),
				[Exist] [bit] DEFAULT ((0))
				)
		declare @exist bit
		set @exist =(select @sensors.exist('/DigitalIn/Sensor'))
		if(@exist = 1)
		begin
			insert into @SensorsAnalog select 
				  t.x.value('@SerialNumber','varchar(50)')		
				, t.x.value('@UserSerialNumber','varchar(50)')		
				, t.x.value('@Model','varchar(50)')					
				, t.x.value('@Manufacturer','varchar(50)')			
				, t.x.value('@Status','varchar(50)')					
				, t.x.value('@MeasurementUnit','varchar(50)')		
				, t.x.value('@OffsetToleranceLow','float')		
				, t.x.value('@OffsetToleranceHigh','float')	
				, t.x.value('@eId','varchar(50)')						
				, t.x.value('@Capacity','float')				
				, t.x.value('@Comment','varchar(50)')				
				, t.x.value('@BridgeType','smallint')				
				, t.x.value('@BridgeLegMode','smallint')			
				, t.x.value('@Shunt','smallint')					
				, t.x.value('@Invert','bit')					
				, t.x.value('@UserValue1','varchar(50)')				
				, t.x.value('@UserValue2','varchar(50)')				
				, t.x.value('@UserValue3','varchar(50)')				
				, t.x.value('@FilterClass','varchar(50)')			
				, t.x.value('@BridgeResistance','float')		
				, t.x.value('@IsoCode','varchar(50)')				
				, t.x.value('@CheckOffset','bit')			
				, t.x.value('@SupportedExcitation','varchar(50)')	
				, t.x.value('@InitialEU','float')				
				, t.x.value('@CalInterval','int')			
				, t.x.value('@CalibrationSignal','bit')		
				, t.x.value('@InternalShuntResistance','float')
				, t.x.value('@ExternalShuntResistance','float')
				, t.x.value('@UniPolar','bit')				
				, t.x.value('@RangeLow','float')				
				, t.x.value('@RangeAve','float')				
				, t.x.value('@RangeHigh','float')				
				, t.x.value('@Created','datetime')				
				, t.x.value('@TimesUsed','bigint')				
				, t.x.value('@SensorCategory','int')			
				, t.x.value('@BypassFilter','bit')			
				, t.x.value('@CouplingMode','smallint')			
				, t.x.value('@Version','int')				
				, t.x.value('@LastModified','datetime')			
				, t.x.value('@ModifiedBy','varchar(50)')				
				, t.x.value('@LocalOnly','bit')				
				, t.x.value('@AxisNumber','smallint')				
				, t.x.value('@NumberOfAxes','smallint')			
				, t.x.value('@UserTags','varbinary(max)')				
				, t.x.value('@DoNotUse','bit')				
				, t.x.value('@Broken','bit')
				, 0		
		from @sensors.nodes('/Analog/Sensor') t(x)
		OPTION (OPTIMIZE FOR ( @sensors = NULL ))

			declare @count int
			set @count = (select count(*) from @SensorsAnalog)
			if(@count > 0)
			begin
			update @SensorsAnalog set Exist = case when EXISTS(select SerialNumber from v_SensorSerialNumber where SensorType =0 ) then 1 else 0 end
			
			update [dbo].[SensorsAnalog]
				   SET [SerialNumber] 				=s.SerialNumber			
					  ,[UserSerialNumber] 			=s.UserSerialNumber		
					  ,[Model] 						=s.Model					
					  ,[Manufacturer] 				=s.Manufacturer			
					  ,[Status] 					=s.[Status]					
					  ,[MeasurementUnit] 			=s.MeasurementUnit		
					  ,[OffsetToleranceLow] 		=s.OffsetToleranceLow		
					  ,[OffsetToleranceHigh] 		=s.OffsetToleranceHigh	
					  ,[eId] 						=s.eId						
					  ,[Capacity] 					=s.Capacity				
					  ,[Comment] 					=s.Comment				
					  ,[BridgeType] 				=s.BridgeType				
					  ,[BridgeLegMode] 				=s.BridgeLegMode			
					  ,[Shunt] 						=s.Shunt					
					  ,[Invert] 					=s.Invert					
					  ,[UserValue1] 				=s.UserValue1				
					  ,[UserValue2] 				=s.UserValue2				
					  ,[UserValue3] 				=s.UserValue3				
					  ,[FilterClass] 				=s.FilterClass			
					  ,[BridgeResistance] 			=s.BridgeResistance		
					  ,[IsoCode] 					=s.IsoCode				
					  ,[CheckOffset] 				=s.CheckOffset			
					  ,[SupportedExcitation] 		=s.SupportedExcitation	
					  ,[InitialEU] 					=s.InitialEU				
					  ,[CalInterval] 				=s.CalInterval			
					  ,[CalibrationSignal] 			=s.CalibrationSignal		
					  ,[InternalShuntResistance] 	=s.InternalShuntResistance
					  ,[ExternalShuntResistance] 	=s.ExternalShuntResistance
					  ,[UniPolar] 					=s.UniPolar				
					  ,[RangeLow] 					=s.RangeLow				
					  ,[RangeAve] 					=s.RangeAve				
					  ,[RangeHigh] 					=s.RangeHigh				
					  ,[Created] 					=s.Created				
					  ,[TimesUsed] 					=s.TimesUsed				
					  ,[SensorCategory] 			=s.SensorCategory			
					  ,[BypassFilter] 				=s.BypassFilter			
					  ,[CouplingMode] 				=s.CouplingMode			
					  ,[Version] 					=s.[Version]
					  ,[LastModified] 				=s.LastModified			
					  ,[ModifiedBy] 				=s.ModifiedBy				
					  ,[LocalOnly] 					=s.LocalOnly				
					  ,[AxisNumber] 				=s.AxisNumber				
					  ,[NumberOfAxes] 				=s.NumberOfAxes			
					  ,[UserTags] 					=s.UserTags				
					  ,[DoNotUse] 					=s.DoNotUse				
					  ,[Broken] 					=s.Broken	
					  from 	@SensorsAnalog s			
			where [dbo].[SensorsAnalog].[SerialNumber] =s.SerialNumber	
			
			insert into  [dbo].[SensorsAnalog]
			   ([SerialNumber]
			   ,[UserSerialNumber]
			   ,[Model]
			   ,[Manufacturer]
			   ,[Status]
			   ,[MeasurementUnit]
			   ,[OffsetToleranceLow]
			   ,[OffsetToleranceHigh]
			   ,[eId]
			   ,[Capacity]
			   ,[Comment]
			   ,[BridgeType]
			   ,[BridgeLegMode]
			   ,[Shunt]
			   ,[Invert]
			   ,[UserValue1]
			   ,[UserValue2]
			   ,[UserValue3]
			   ,[FilterClass]
			   ,[BridgeResistance]
			   ,[IsoCode]
			   ,[CheckOffset]
			   ,[SupportedExcitation]
			   ,[InitialEU]
			   ,[CalInterval]
			   ,[CalibrationSignal]
			   ,[InternalShuntResistance]
			   ,[ExternalShuntResistance]
			   ,[UniPolar]
			   ,[RangeLow]
			   ,[RangeAve]
			   ,[RangeHigh]
			   ,[Created]
			   ,[TimesUsed]
			   ,[SensorCategory]
			   ,[BypassFilter]
			   ,[CouplingMode]
			   ,[Version]
			   ,[LastModified]
			   ,[ModifiedBy]
			   ,[LocalOnly]
			   ,[AxisNumber]
			   ,[NumberOfAxes]
			   ,[UserTags]
			   ,[DoNotUse]
			   ,[Broken])
			select
				 s.SerialNumber				
				,s.UserSerialNumber			
				,s.Model						
				,s.Manufacturer				
				,s.[Status]					
				,s.MeasurementUnit			
				,s.OffsetToleranceLow			
				,s.OffsetToleranceHigh		
				,s.eId							
				,s.Capacity					
				,s.Comment					
				,s.BridgeType					
				,s.BridgeLegMode				
				,s.Shunt						
				,s.Invert						
				,s.UserValue1					
				,s.UserValue2					
				,s.UserValue3					
				,s.FilterClass				
				,s.BridgeResistance			
				,s.IsoCode					
				,s.CheckOffset				
				,s.SupportedExcitation		
				,s.InitialEU					
				,s.CalInterval				
				,s.CalibrationSignal			
				,s.InternalShuntResistance	
				,s.ExternalShuntResistance	
				,s.UniPolar					
				,s.RangeLow					
				,s.RangeAve					
				,s.RangeHigh					
				,s.Created					
				,s.TimesUsed					
				,s.SensorCategory				
				,s.BypassFilter				
				,s.CouplingMode				
				,s.[Version]					
				,s.LastModified				
				,s.ModifiedBy					
				,s.LocalOnly					
				,s.AxisNumber					
				,s.NumberOfAxes				
				,s.UserTags					
				,s.DoNotUse					
				,s.Broken
				from 	@SensorsAnalog s where s.Exist = 0
			/* insert/update SensorCalibrations record */
		end
		end
	end
END




























GO